UNI EN 1504-10 : 2005

Name: UNI EN 1504-10 : 2005
Brand: UNI

Superseded

View Superseded by

PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS - REQUIREMENTS - QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS

Superseded date

10-08-2022

Published date

01-01-2005

Publisher

Ente Nazionale Italiano di Unificazione (UNI)

1 Scope
2 Normative references
3 Terms and definitions
4 Structural stability during preparation, protection and
repair
5 General requirements
6 Methods of protection and repair
7 Preparation of substrate
8 Application of products and systems
9 Quality control
10 Maintenance
11 Health, safety and the environment
Annex A (informative)

Describes requirements for substrate condition before and during application including structural stability, storage, the preparation and application of products and systems for the protection and repair of concrete structures including quality control, maintenance, health and safety, and the environment.

DocumentType	Standard
PublisherName	Ente Nazionale Italiano di Unificazione (UNI)
Status	Superseded
SupersededBy	UNI EN 1504-10:2017

Standards	Relationship
DIN EN 1504-10:2015-11 (Draft)	Identical
NBN EN 1504-10 : 2004 COR 2005	Identical
NEN EN 1504-10 : 2017	Identical
NS EN 1504-10 : 2003 + NA 2013	Identical
I.S. EN 1504-10:2004	Identical
UNE-EN 1504-10:2006	Identical
BS EN 1504-10:2017	Identical
EN 1504-10:2017	Identical
NF EN 1504-10 : 2017	Identical
SN EN 1504-10 : 2017	Identical
I.S. EN 1504-10:2017	Identical
ONORM EN 1504-10 : 2017	Identical

EN 12390-3:2009/AC:2011	TESTING HARDENED CONCRETE - PART 3: COMPRESSIVE STRENGTH OF TEST SPECIMENS
EN ISO 4628-2:2016	Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering (ISO 4628-2:2016)
PREN 14487-1 : DRAFT 2002	SPRAYED CONCRETE - PART 1: DEFINITIONS, SPECIFICATIONS AND CONFORMITY
ISO 8502-3:2017	Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method)
ISO 8502-4:2017	Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 4: Guidance on the estimation of the probability of condensation prior to paint application
PREN 1504-4 : DRAFT 2016	PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 4: STRUCTURAL BONDING
EN 12390-8:2009	Testing hardened concrete - Part 8: Depth of penetration of water under pressure
EN 24624 : 1992	PAINTS AND VARNISHES - PULL-OFF TEST
ISO 8501-1:2007	Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings
PREN 1504-2 : DRAFT 2015	PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS FOR CONCRETE
ENV 1992-4 : DRAFT 98	EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 4: LIQUID RETAINING AND CONTAINMENT STRUCTURES
EN 12190:1998	Products and systems for the protection and repair of concrete structures - Test methods - Determination of compressive strength of repair mortar
EN ISO 4628-1:2016	PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 1: GENERAL INTRODUCTION AND DESIGNATION SYSTEM (ISO 4628-1:2016)
EN 12350-2:2009	Testing fresh concrete - Part 2: Slump-test
EN ISO 4288 : 1997	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - RULES AND PROCEDURES FOR THE ASSESSMENT OF SURFACE TEXTURE
EN 12350-6:2009	Testing fresh concrete - Part 6: Density
ISO 2808:2007	Paints and varnishes Determination of film thickness
ENV 1992-2 : DRAFT 96	EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - CONCRETE BRIDGES
EN ISO 8502-2:2017	Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 2: Laboratory determination of chloride on cleaned surfaces (ISO 8502-2:2017)
89/106/EEC : 1988	COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS
EN 12390-7:2009	Testing hardened concrete - Part 7: Density of hardened concrete
EN 1542:1999	Products and systems for the protection and repair of concrete structures - Test methods - Measurement of bond strength by pull-off
ISO 565:1990	Test sieves — Metal wire cloth, perforated metal plate and electroformed sheet — Nominal sizes of openings
EN 13395-2:2002	Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 2: Test for flow of grout or mortar
ISO/TR 8502-1:1991	Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 1: Field test for soluble iron corrosion products
EN 12350-3:2009	Testing fresh concrete - Part 3: Vebe test
EN 1008:2002	Mixing water for concrete - Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete
EN 12504-2:2012	TESTING CONCRETE IN STRUCTURES - PART 2: NON-DESTRUCTIVE TESTING - DETERMINATION OF REBOUND NUMBER
EN ISO 4628-4:2016	Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4: Assessment of degree of cracking (ISO 4628-4:2016)
ISO 4677-1:1985	Atmospheres for conditioning and testing Determination of relative humidity Part 1: Aspirated psychrometer method
ISO 4628-4:2016	Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 4: Assessment of degree of cracking
ISO 4628-3:2016	Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 3: Assessment of degree of rusting
EN ISO 8502-3:2017	Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method) (ISO 8502-3:2017)
EN ISO 4628-3:2016	Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting (ISO 4628-3:2016)
ISO 4624:2016	Paints and varnishes — Pull-off test for adhesion
EN 12350-5:2009	Testing fresh concrete - Part 5: Flow table test
ISO 4628-1:2016	Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 1: General introduction and designation system
EN ISO 4628-6:2011	Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 6: Assessment of degree of chalking by tape method (ISO 4628-6:2011)
EN 12390-1:2012	TESTING HARDENED CONCRETE - PART 1: SHAPE, DIMENSIONS AND OTHER REQUIREMENTS FOR SPECIMENS AND MOULDS
ISO 3274:1996	Geometrical Product Specifications (GPS) — Surface texture: Profile method — Nominal characteristics of contact (stylus) instruments
ENV ISO 8502-1 : DRAFT 1999	PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TESTS FOR THE ASSESSMENT OF SURFACE CLEANLINESS - PART 1: FIELD TEST FOR SOLUBLE IRON CORROSION PRODUCTS
EN 12350-4:2009	Testing fresh concrete - Part 4: Degree of compactability
EN 12390-2:2009	Testing hardened concrete - Part 2: Making and curing specimens for strength tests
PREN 10080-1 : DRAFT 1999	STEEL FOR CONCRETE REINFORCEMENT OF CONCRETE - WELDABLE REINFORCING STEEL - PART 1: GENERAL REQUIREMENTS
EN 206-1:2000/A2:2005	CONCRETE - PART 1: SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY
EN 13395-3:2002	Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 3: Test for flow of repair concrete
ISO 4628-6:2011	Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 6: Assessment of degree of chalking by tape method
EN 12350-1:2009	Testing fresh concrete - Part 1: Sampling
EN 12696 : 2000	CATHODIC PROTECTION OF STEEL IN CONCRETE
ISO 8502-2:2017	Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 2: Laboratory determination of chloride on cleaned surfaces
EN ISO 8502-4:2017	Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 4: Guidance on the estimation of the probability of condensation prior to paint application (ISO 8502-4:2017)
EN 1504-1:2005	Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 1: Definitions
ENV 13670-1 : DRAFT 2000	EXECUTION OF CONCRETE STRUCTURES - PART 1 - COMMON
EN ISO 8501-1:2007	Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings (ISO 8501-1:2007)
PREN 1504-7 : DRAFT 2015	PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND AVCP - PART 7: REINFORCEMENT CORROSION PROTECTION
EN 12350-7:2009	Testing fresh concrete - Part 7: Air content - Pressure methods
EN 12504-1:2009	Testing concrete in structures - Part 1: Cored specimens - Taking, examining and testing in compression
ENV 1992-3 : DRAFT 1998	EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 3: CONCRETE FOUNDATIONS
EN 1990:2002/A1:2005/AC:2010	EUROCODE - BASIS OF STRUCTURAL DESIGN
EN 1766:2017	Products and systems for the protection and repair of concrete structures - Test methods - Reference concretes for testing
EN 13395-4:2002	Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 4: Application of repair mortar overhead
ISO 4677-2:1985	Atmospheres for conditioning and testing Determination of relative humidity Part 2: Whirling psychrometer method
PREN 1504-3 : DRAFT 2015	PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND AVCP - PART 3: REPAIR CONCRETE AND MORTARS
EN ISO 3274 : 1997	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - NOMINAL CHARACTERISTICS OF CONTACT (STYLUS) INSTRUMENTS
EN ISO 2808:2007	Paints and varnishes - Determination of film thickness (ISO 2808:2007)
ISO 4628-2:2016	Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 2: Assessment of degree of blistering
EN 13395-1:2002	Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 1: Test for flow of thixotropic mortars
ENV 1504-9 : DRAFT 1997	PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - GENERAL PRINCIPLES FOR THE USE OF PRODUCTS AND SYSTEMS