|
DWA-A 779 : 2006 COR 2006
|
TECHNISCHE REGEL WASSERGEFAEHRDENDER STOFFE (TRWS 779) - ALLGEMEINE TECHNISCHE REGELUNGEN |
|
DWA-A 781 : DRAFT 2015
|
TECHNISCHE REGEL WASSERGEFAEHRDENDER STOFFE (TRWS) TANKSTELLEN FUER KRAFTFAHRZEUGE |
|
FGSV 760 : 2016
|
M A-UWS - MERKBLATT ASPHALTBAUWEISEN FUER ANLAGEN ZUM UMGANG MIT WASSERGEFAEHRDENDEN STOFFEN |
|
VDI 3790 Blatt 3:2010-01
|
ENVIRONMENTAL METEOROLOGY - EMISSION OF GASES, ODOURS AND DUSTS FROM DIFFUSE SOURCES - STORAGE, TRANSHIPMENT AND TRANSPORTATION OF BULK MATERIALS |
|
DIN EN 12195-1:2011-06
|
LOAD RESTRAINING ON ROAD VEHICLES - SAFETY - PART 1: CALCULATION OF SECURING FORCES |
|
DIN EN 1992-1-1/NA:2013-04
|
NATIONAL ANNEX - NATIONALLY DETERMINED PARAMETERS - EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS |
|
DWA-A 786 : 2005
|
TECHNISCHE REGEL WASSERGEFAEHRDENDER STOFFE (TRWS 786) - AUSFUEHRUNG VON DICHTFLAECHEN |
|
VDI 3679:1980-05
|
Wet precipitators |
|
DIN 38402-11:2009-02
|
GERMAN STANDARD METHODS FOR THE EXAMINATION OF WATER, WASTE WATER AND SLUDGE - GENERAL INFORMATION (GROUP A) - PART 11: SAMPLING OF WASTE WATER (A 11) |
|
EN 1992-3 : 2006
|
EUROCODE 2 - DESIGN OF CONCRETE STRUCTURES - PART 3: LIQUID RETAINING AND CONTAINMENT STRUCTURES |
|
DWA-A 787 : 2009
|
TECHNISCHE REGEL WASSERGEFAEHRDENDER STOFFE (TRWS 787) - ABWASSERANLAGEN ALS AUFFANGVORRICHTUNGEN |
|
DIN 45669-1:2010-09
|
MEASUREMENT OF VIBRATION IMMISSION - PART 1: VIBRATION METERS - REQUIREMENTS AND TESTS |
|
VDI 2700:2004-11
|
SECURING OF LOADS ON ROAD VEHICLES |
|
DIN 45645-2:2012-09
|
DETERMINATION OF RATING LEVELS FROM MEASUREMENT DATA - PART 2: DETERMINATION OF THE NOISE RATING LEVEL FOR OCCUPATIONAL ACTIVITIES AT THE WORK PLACE FOR THE LEVEL RANGE UNDERNEATH THE GIVEN RISK OF HEARING DAMAGE |
|
VDI 2058 Blatt 2:1988-06
|
Assessment of noise with regard to the risk of hearing damages |
|
DIN EN ISO 14001:2015-11
|
ENVIRONMENTAL MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE (ISO 14001:2015) |
|
DIN EN 858-1:2005-02
|
SEPARATOR SYSTEMS FOR LIGHT LIQUIDS (E.G. OIL AND PETROL) - PART 1: PRINCIPLES OF PRODUCT DESIGN, PERFORMANCE AND TESTING, MARKING AND QUALITY CONTROL |
|
FGSV 499 : 2012
|
RSTO - GUIDELINES FOR THE STANDARDISATION OF PAVEMENT STRUCTURES OF TRAFFIC AREAS |
|
DIN 4261-1:2010-10
|
Small sewage treatment plants - Part 1: Plants for waste water pretreatment |
|
DIN 18560-7:2004-04
|
Floor screeds - Part 7: Heavy-duty screeds (industrial screeds) |
|
DIN 1045-1:2008-08
|
CONCRETE, REINFORCED AND PRESTRESSED CONCRETE STRUCTURES - PART 1: DESIGN AND CONSTRUCTION |
|
DIN EN 1992-3/NA:2011-01
|
NATIONAL ANNEX - NATIONALLY DETERMINED PARAMETERS - EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 3: LIQUID RETAINING AND CONTAINMENT STRUCTURES |
|
VDI 1000:2017-02
|
VDI Standardisation Work - Principles and procedures |
|
DWA-A 138 : 2005 COR 2006
|
PLANNING, CONSTRUCTION AND OPERATION OF FACILITIES FOR THE PERCOLATION OF PRECIPITATION WATER |
|
EN ISO 9001:2015
|
Quality management systems - Requirements (ISO 9001:2015) |
|
EN 10021:2006
|
General technical delivery conditions for steel products |
|
VDI 2057 Blatt 3:2017-03
|
HUMAN EXPOSURE TO MECHANICAL VIBRATION - WHOLE-BODY VIBRATION AT WORKPLACES IN BUILDINGS |
|
EN 10188:1989
|
Chemical analysis of ferrous materials - Determination of chromium in steels and irons - Flame atomic absorption spectrometric method |
|
VDI 3397 Blatt 3:2016-10
|
Disposal of metalworking fluids |
|
DIN EN 206:2014-07
|
CONCRETE - SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY |
|
DIN 1999-100:2003-10
|
INSTALLATIONS FOR SEPARATION OF LIGHT LIQUIDS - PART 100: APPLICATION PROVISIONS FOR INSTALLATIONS FOR SEPARATION OF LIGHT LIQUIDS IN ACCORDANCE WITH DIN EN 858-1 AND DIN EN 858-2 |
|
ISO 14001:2015
|
Environmental management systems — Requirements with guidance for use |
|
DIN 1045-4:2012-02
|
CONCRETE, REINFORCED AND PRESTRESSED CONCRETE STRUCTURES - PART 4: ADDITIONAL RULES FOR THE PRODUCTION AND THE CONFORMITY OF PREFABRICATED ELEMENTS |
|
DIN 18195-5:2011-12
|
WATER-PROOFING OF BUILDINGS - PART 5: WATER-PROOFING AGAINST NON-PRESSING WATER ON FLOORS AND IN WET AREAS, DESIGN AND EXECUTION |
|
DIN 18560-4:2012-06
|
FLOOR SCREEDS - PART 4: SCREEDS LAID ON SEPARATED LAYER |
|
EN ISO 14001:2015
|
Environmental management systems - Requirements with guidance for use (ISO 14001:2015) |
|
ISO 9001:2015
|
Quality management systems - Requirements |
|
DIN 1045-2:2008-08
|
CONCRETE, REINFORCED AND PRESTRESSED CONCRETE STRUCTURES - PART 2: CONCRETE - SPECIFICATION, PROPERTIES, PRODUCTION AND CONFORMITY - APPLICATION RULES FOR DIN EN 206-1 |
|
EN 858-1:2002/A1:2004
|
SEPARATOR SYSTEMS FOR LIGHT LIQUIDS (E.G. OIL AND PETROL) - PART 1: PRINCIPLES OF PRODUCT DESIGN, PERFORMANCE AND TESTING, MARKING AND QUALITY CONTROL |
|
EN 206-1:2000/A2:2005
|
CONCRETE - PART 1: SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY |
|
VDI 2057-1 : 2017 COR 1 2017
|
HUMAN EXPOSURE TO MECHANICAL VIBRATIONS - WHOLE-BODY VIBRATION |
|
DIN EN ISO 9001:2015-11
|
QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS (ISO 9001:2015) |
|
VDI 3676:1999-10
|
Inertial Separators |
|
BGI 5131 : 2009
|
|
|
DIN 4150-3:2015-10 (Draft)
|
VIBRATION IN BUILDINGS - PART 3: EFFECTS ON STRUCTURES |
|
DIN 45669-2:2005-06
|
Measurement of vibration immission - Part 2: Measuring method |
|
VDI 2057 Blatt 2:2016-03
|
Human exposure to mechanical vibrations - Hand-arm vibration
|
|
EN 1992-1-1:2004/A1:2014
|
EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS |
|
DIN EN 1992-1-1:2011-01
|
EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS |
|
DVGW W 405 : 2008
|
WATER FOR FIRE FIGHTING TO BE MADE AVAILABLE BY PUBLIC DRINKING WATER SUPPLY SYSTEMS |
|
EN 858-2:2003
|
Separator systems for light liquids (e.g. oil and petrol) - Part 2: Selection of nominal size, installation, operation and maintenance |
|
DIN EN 858-2:2003-10
|
SEPARATOR SYSTEMS FOR LIGHT LIQUIDS (E.G. OIL AND PETROL) - PART 2: SELECTION OF NOMINAL SIZE, INSTALLATION, OPERATION AND MAINTENANCE |