AS/NZS 5601.2:2020
Current
The latest, up-to-date edition.
Gas installations LP Gas installations in caravans and boats for non-propulsive purposes
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
01-10-2020
Specifies requirements and means of conformance for the design, installation and commissioning of LP Gas installations in caravans and boats for non-propulsive purposes.
This Standard specifies requirements and means of conformance for the design, installation, repair, alteration, modification, replacement and commissioning of LP Gas installations in caravans and boats for non-propulsive purposes.
The requirements cover —
(a) caravans;
(b) mobile homes, mobile holiday homes, campervans and motor homes;
(c) transportable structures with fixed gas installations, other than transportable homes and classroom units;
(d) trucks and trailers incorporating fixed gas installations;
(e) boats;
(f) houseboats;
(g) floating restaurants, whether fixed or mobile; and
(h) catering vehicles, whether self-propelled or towed.
NOTE 1 A mobile home includes what is often referred to as a “tiny house”, which is a relocatable home as distinct from a permanent structure that is transported from one fixed location to the next (see exclusions below).
NOTE 2 Where commercial catering equipment is to be installed, refer to AS/NZS 5601.1 for specific appliance installation requirements downstream of the appliance installation valve.
Committee |
AG-006
|
DevelopmentNote |
New PDF incorporating Amendment 1.
|
DocumentType |
Standard
|
ISBN |
978 1 76072 998 1
|
Pages |
101
|
PublisherName |
Standards Australia
|
Status |
Current
|
Supersedes |
Originated in New Zealand as NZS 5428:1996 and part of NZS 5261:2003. Originated in Australia as part of AS 5601-2004.
First joint edition AS/NZS 5601.2:2010.
Previous edition 2013.
Third edition 2020. Originated in New Zealand as NZS 5428:1996 and part of NZS 5261:2003. Originated in Australia as part of AS 5601-2004. First joint edition AS/NZS 5601.2:2010. Previous edition 2013. Third edition 2020. Reissued incorporating Amendment No 1 (February 2021).
BS 3212:1991 | Specification for flexible rubber tubing, rubber hose and rubber hose assemblies for use in LPG vapour phase and LPG/air installations |
AS/NZS 3500.4:2018 | Plumbing and drainage Heated water services |
AS 4617:2018 | Manually operated gas valves |
AS/NZS 3000:2018 (Unamended Hardcopy + Amendments) | Electrical installations (known as the Australian/New Zealand Wiring Rules) |
AS/NZS 60079.14:2017 | Explosive atmospheres Design selection, erection and initial inspection (IEC 60079-14:2013 (ED.5.0) MOD) |
AS 4627:2017 | Quick-connect devices for gas |
AS 3688:2016 | Water supply and gas systems - Metallic fittings and end connectors |
AS/NZS 60079.29.2:2016 | Explosive atmospheres Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen |
AS 2473.2:2015 | Valves for compressed gas cylinders Outlet connections (threaded) and stem (inlet) threads |
AS/NZS 1596:2014 | The storage and handling of LP Gas |
AS/NZS 2208:1996 | Safety glazing materials in buildings |
AS/NZS 1734:1997 | Aluminium and aluminium alloys - Flat sheet, coiled sheet and plate (Reconfirmed 2020) |
AS/NZS 1530.3:1999 | Methods for fire tests on building materials, components and structures Simultaneous determination of ignitability, flame propagation, heat release and smoke release (Reconfirmed 2016) |
AS D26-1972 | Tube fittings with dryseal American standard taper pipe and unified threads for automotive and industrial use (imperial units) (Reconfirmed 2018) |
AS/NZS 5601.1:2013 | Gas installations General installations |
AS 4629-2005 | Automatic shut off valves and vent valves (Reconfirmed 2018) |
AS 2738-2000 | Copper and copper alloys - Compositions and designations of refinery products, wrought products, ingots and castings (Reconfirmed 2018) |
AS 2030.4-1985 | The verification, filling, inspection, testing and maintenance of cylinders for storage and transport of compressed gases Welded cylinders - Insulated |
AS 2030.2-1996 | The verification, filling, inspection, testing and maintenance of cylinders for the storage and transport of compressed gases Cylinders for dissolved acetylene |
ASTM A 269/A269M : 2015 | Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service |
AS/NZS 1869:2012 | Hose and hose assemblies for liquefied petroleum gases (LP Gas), natural gas and town gas |
AS 1397-2011 | Continuous hot-dip metallic coated steel sheet and strip - Coatings of zinc and zinc alloyed with aluminium and magnesium |
AS 3814:2018 | Industrial and commercial gas-fired appliances |
AS/NZS 60079.25:2011 | Explosive atmospheres Intrinsically safe electrical systems |
AS 1572-1998 | Copper and copper alloys - Seamless tubes for engineering purposes (Reconfirmed 2018) |
AS 1530.1-1994 | Methods for fire tests on building materials, components and structures Combustibility test for materials (Reconfirmed 2016) |
AS 1432-2004 | Copper tubes for plumbing, gasfitting and drainage applications |
AS 4621:2019 | Regulator for use with liquefied petroleum - Vapour phase |
AS 2030.5-2009 | Gas cylinders Filling, inspection and testing of refillable cylinders |
AS 2030.1-2009 | Gas cylinders General requirements |
AS ISO 7.1-2008 | Pipe threads where pressure-tight joints are made on the threads Dimensions, tolerances and designation |
AS 1357.1:2019 | Valves primarily for use in heated water systems Protection valves |
AS 1906.1:2017 | Retroreflective materials and devices for road traffic control purposes Retroreflective sheeting |
AS/NZS 3000:2018 | Electrical installations (known as the Australian/New Zealand Wiring Rules) |
ASTM C 518 : 2017 | Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus |
EN 50291-1:2018 | Gas detectors - Electrical apparatus for the detection of carbon monoxide in domestic premises - Part 1: Test methods and performance requirements |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.