Standard Test Method for Density and Void Content of Freshly Mixed Pervious Concrete (Withdrawn 2023)

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

30-10-2014

Publisher

American Society for Testing and Materials

1.1This test method covers determining the density of freshly mixed pervious concrete under standardized conditions and gives formulas for calculating the void content of pervious concrete. Test results are not intended to represent the in-place density and void content.

1.2The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. (Warning—Fresh hydraulic cementitious mixtures are caustic and may cause chemical burns to skin and tissue upon prolonged exposure.2)

1.4The text of this test method references notes and footnotes that provide explanatory information. These notes and footnotes (excluding those in tables) shall not be considered as requirements of this test method.

Committee	C 09
DocumentType	Test Method
Pages	4
PublisherName	American Society for Testing and Materials
Status	Current
Supersedes	ASTM C 1688/C1688M : 2014

ASTM C 125 : 2021	Standard Terminology Relating to Concrete and Concrete Aggregates
ASTM C 1240 : 2001	Standard Specification for Use of Silica Fume for Use as a Mineral Admixture in Hydraulic-Cement Concrete, Mortar, and Grout
ASTM D 698 : 2000	Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12,400 ft-lbf/ft<sup>3</sup> (600 kN-m/m<sup>3</sup>))
ASTM C 231/C231M : 2017 : REV A	Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
ASTM C 1240 : 2010	Standard Specification for Silica Fume Used in Cementitious Mixtures
ASTM D 6926 : 2004	Standard Practice for Preparation of Bituminous Specimens Using Marshall Apparatus
ASTM C 595/C595M : 2021	Standard Specification for Blended Hydraulic Cements
ASTM D 698 : 2012 : R2021	Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12,400 ft-lbf/ft<sup>3</sup> (600 kN-m/m<sup>3</sup>))
ASTM C 192/C192M : 2000	Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory
ASTM C 1240 : 2014	Standard Specification for Silica Fume Used in Cementitious Mixtures
ASTM C 989/C989M : 2018 : REV A	Standard Specification for Slag Cement for Use in Concrete and Mortars
ASTM C 125 : 2000	Standard Terminology Relating to Concrete and Concrete Aggregates
ASTM C 1240 : 2004	Standard Specification for Silica Fume Used in Cementitious Mixtures
ASTM C 595/C595M : 2020	Standard Specification for Blended Hydraulic Cements
ASTM C 1240 : 2000 : EDT 1	Standard Specification for Use of Silica Fume for Use as a Mineral Admixture in Hydraulic-Cement Concrete, Mortar, and Grout
ASTM C 1240 : 2010 : REV A	Standard Specification for Silica Fume Used in Cementitious Mixtures
ASTM C 1157/C1157M : 2020	Standard Performance Specification for Hydraulic Cement
ASTM C 150/C150M : 2021	Standard Specification for Portland Cement
ASTM C 1157/C1157M : 2020 : REV A	Standard Performance Specification for Hydraulic Cement
ASTM C 1240 : 2012	Standard Specification for Silica Fume Used in Cementitious Mixtures
ASTM C 1240 : 2003	Standard Specification for Use of Silica Fume for Use as a Mineral Admixture in Hydraulic-Cement Concrete, Mortar, and Grout
ASTM D 6926 : 2020	Standard Practice for Preparation of Asphalt Mixture Specimens Using Marshall Apparatus
ASTM D 6926 : 2010	Standard Practice for Preparation of Bituminous Specimens Using Marshall Apparatus
ASTM C 128 : 2015	Standard Test Method for Relative Density (Specific Gravity) and Absorption of Fine Aggregate
ASTM C 125 : 2021 : REV A	Standard Terminology Relating to Concrete and Concrete Aggregates
ASTM C 311 : 2011	Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete
ASTM D 6926 : 2016	Standard Practice for Preparation of Asphalt Mixture Specimens Using Marshall Apparatus
ASTM C 150/C150M : 2020	Standard Specification for Portland Cement
ASTM C 125 : 2020	Standard Terminology Relating to Concrete and Concrete Aggregates
ASTM C 1240 : 2015	Standard Specification for Silica Fume Used in Cementitious Mixtures
ASTM C 1240 : 2020	Standard Specification for Silica Fume Used in Cementitious Mixtures
ASTM C 989/C989M : 2022	Standard Specification for Slag Cement for Use in Concrete and Mortars
ASTM C 150/C150M : 2022	Standard Specification for Portland Cement
ASTM C 1240 : 2011	Standard Specification for Silica Fume Used in Cementitious Mixtures
ASTM C 231/C231M : 2022	Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
ASTM C 1240 : 2005	Standard Specification for Silica Fume Used in Cementitious Mixtures
ASTM C 128 : 2022	Standard Test Method for Relative Density (Specific Gravity) and Absorption of Fine Aggregate
ASTM C 1240 : 2003 : REV A	Standard Specification for Use of Silica Fume for Use as a Mineral Admixture in Hydraulic-Cement Concrete, Mortar, and Grout
ASTM D 698 : 2012 : EDT 2	Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 ft-lbf/ft<sup>3</sup> (600 kN-m/m<sup>3</sup>))
ASTM C 125 : 2009	Standard Terminology Relating to Concrete and Concrete Aggregates