Standard Practice for Setting and Verifying the Flow Rate of Personal Sampling Pumps

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

05-06-2023

Publisher

American Society for Testing and Materials

1.1This practice describes the setting and verification of flow rate for sampling pumps commonly used for monitoring personal airborne exposures in the workplace.

1.2This practice includes procedures for using working standard flow meters that are traceable to national or international standards, as well as those that are not. Traceable standards are preferred.

1.3The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee	D 22
DocumentType	Standard Practice
Pages	5
PublisherName	American Society for Testing and Materials
Status	Current
Supersedes	ASTM D 5337 : 2011 : R2016

ASTM D 7144 : 2021	Standard Practice for Collection of Surface Dust by Micro-vacuum Sampling for Subsequent Determination of Metals and Metalloids
ASTM D 4490 : 2023	Standard Practice for the Use of Detector Tubes in the Measurement of Toxic Gases and Vapors
ASTM D 3686 : 2020	Standard Practice for Sampling Atmospheres to Collect Organic Compound Vapors (Activated Charcoal Tube Adsorption Method)
ASTM D 6785 : 2020	Standard Test Method for Determination of Lead in Workplace Air Using Flame or Graphite Furnace Atomic Absorption Spectrometry
ASTM D 8208 : 2019	Standard Practice for Collection of Non-Fibrous Nanoparticles Using a Nanoparticle Respiratory Deposition (NRD) Sampler
ASTM D 4765 : 2013 : R2018	Standard Test Method for Measurement of Fluorides in Workplace Atmospheres by Ion-Selective Electrodes
ASTM D 8345 : 2021	Standard Test Method for Determination of an Emission Parameter for Phthalate Esters and Other Non-Phthalate Plasticizers from Planar Polyvinyl Chloride Indoor Materials for Use in Mass Transfer Modeling Calculations
ASTM D 4600 : 2022	Standard Test Method for Determination of Benzene-Soluble Particulate Matter in Workplace Atmospheres
ASTM D 7143 : 2017	Standard Practice for Emission Cells for the Determination of Volatile Organic Emissions from Indoor Materials/Products
ASTM D 5932 : 2020	Standard Test Method for Determination of 2,4-Toluene Di<emph type="bdit">iso</emph >cyanate (2,4-TDI) and 2,6-Toluene Di<emph type="bdit">iso</emph>cyanate (2,6-TDI) in Air (with 9-(N-Methylaminomethyl) Anthracene Method) (MAMA) in the Workplace
ASTM D 7202 : 2022	Standard Test Method for Determination of Beryllium in the Workplace by Extraction and Optical Fluorescence Detection
ASTM D 7049 : 2017	Standard Test Method for Metalworking Fluid Aerosol in Workplace Atmospheres
ASTM D 7773 : 2019	Standard Test Method for Determination of Volatile Inorganic Acids (HCl, HBr, and HNO<inf >3</inf>) Using Filter Sampling and Suppressed Ion Chromatography
ASTM D 5075 : 2001 : R2022	Standard Test Method for Nicotine and 3-Ethenylpyridine in Indoor Air
ASTM D 5836 : 2020	Standard Test Method for Determination of 2,4-Toluene Diisocyanate (2,4-TDI) and 2,6-Toluene Diisocyanate (2,6-TDI) in Workplace Atmospheres (1-2 PP Method)
ASTM D 8142 : 2017 : EDT 1	Standard Test Method for Determining Chemical Emissions from Spray Polyurethane Foam (SPF) Insulation using Micro-Scale Environmental Test Chambers
ASTM D 7295 : 2018	Standard Practice for Sampling Combustion Effluents and Other Stationary Sources for the Subsequent Determination of Hydrogen Cyanide
ASTM D 4185 : 2017	Standard Test Method for Measurement of Metals in Workplace Atmospheres by Flame Atomic Absorption Spectrophotometry
ASTM D 7339 : 2018	Standard Test Method for Determination of Volatile Organic Compounds Emitted from Carpet using a Specific Sorbent Tube and Thermal Desorption / Gas Chromatography
ASTM D 6562 : 2020	Standard Test Method for Determination of Gaseous Hexamethylene Diisocyanate (HDI) in Air with 9-(N-methylaminomethyl) Anthracene Method (MAMA) in the Workplace
ASTM D 7706 : 2017	Standard Practice for Rapid Screening of VOC Emissions from Products Using Micro-Scale Chambers
ASTM D 7201 : 2006 : R2020	Standard Practice for Sampling and Counting Airborne Fibers, Including Asbestos Fibers, in the Workplace, by Phase Contrast Microscopy (with an Option of Transmission Electron Microscopy)
ASTM D 7948 : 2020	Standard Test Method for Measurement of Respirable Crystalline Silica in Workplace Air by Infrared Spectrometry
ASTM D 4532 : 2022	Standard Test Method for Respirable Dust in Workplace Atmospheres Using Cyclone Samplers
ASTM D 7035 : 2021	Standard Test Method for Determination of Metals and Metalloids in Airborne Particulate Matter by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM E 2144 : 2021	Standard Practice for Personal Sampling and Analysis of Endotoxin in Metalworking Fluid Aerosols in Workplace Atmospheres
ASTM D 6494 : 2022	Standard Test Method for Determination of Asphalt Fume Particulate Matter in Workplace Atmospheres as Benzene Soluble Fraction
ASTM D 6561 : 2020	Standard Test Method for Determination of Aerosol Monomeric and Oligomeric Hexamethylene Diisocyanate (HDl) in Air with (Methoxy-2–phenyl-1) Piperazine (MOPIP) in the Workplace