|
NFPA 704 : 2017
|
STANDARD SYSTEM FOR THE IDENTIFICATION OF THE HAZARDS OF MATERIALS FOR EMERGENCY RESPONSE |
|
API RP 754 : 2016
|
PROCESS SAFETY PERFORMANCE INDICATORS FOR THE REFINING AND PETROCHEMICAL INDUSTRIES |
|
NFPA 495 : 2018
|
EXPLOSIVE MATERIALS CODE |
|
API MPM CH8.3 : 1995(R2010)
|
MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 8: SAMPLING - SECTION 3: STANDARD PRACTICE FOR MIXING AND HANDLING OF LIQUID SAMPLES OF PETROLEUM AND PETROLEUM PRODUCTS |
|
DOD-D-64015 Revision A:1986
|
DIETHYLENE GLYCOL DINITRATE (DEGDN) (FOR USE IN AMMUNITION) |
|
NFPA 473 : 2018
|
COMPETENCIES FOR EMS PERSONNEL RESPONDING TO HAZARDOUS MATERIALS/WEAPONS OF MASS DESTRUCTION INCIDENTS |
|
SAE AMS 2644 : 2013
|
INSPECTION MATERIAL, PENETRANT |
|
ASTM D 6368 : 2006 : R2012
|
Standard Specification for Vapor-Degreasing Solvents Based on normal-Propyl Bromide and Technical Grade normal-Propyl Bromide |
|
ASTM D 6517 : 2000 : R2005
|
Standard Guide for Field Preservation of Groundwater Samples |
|
ANSI N14.5 : 2014
|
RADIOACTIVE MATERIALS - LEAKAGE TESTS ON PACKAGES FOR SHIPMENT |
|
MIL L 12039 : D
|
LITHIUM HYDRIDE, TECHNICAL (METRIC) |
|
MIL A 24641 : A
|
ACID, HYDROFLUORIC; TECHNICAL |
|
MIL-PRF-32518 Base Document:2015
|
INTERIOR HEAD IMPACT PROTECTION FOR USE IN U.S. ARMY MILITARY VEHICLE INTERIORS |
|
MIL-STD-3001-1 Revision A:2014
|
PREPARATION OF DIGITAL TECHNICAL INFORMATION FOR MULTI-OUTPUT PRESENTATION OF TECHNICAL MANUALS (PART 1 OF 8 PARTS) |
|
A-A-52545 Revision B:2009
|
HEATERS, VEHICULAR COMPARTMENT 28 VOLT, DC |
|
SAE AS 1066 : 2012
|
MINIMUM STANDARDS FOR VALVE, HIGH PRESSURE OXYGEN, CYLINDER SHUT OFF, MANUALLY OPERATED |
|
AAMI TIR15 : 2016
|
PHYSICAL ASPECTS OF ETHYLENE OXIDE STERILIZATION |
|
ANSI N323AB : 2013
|
RADIATION PROTECTION INSTRUMENTATION TEST AND CALIBRATION, PORTABLE SURVEY INSTRUMENTS |
|
ANSI A10.7 REDLINE : 2011
|
COMPARISON DOCUMENT OF A10.7 AMERICAN NATIONAL STANDARD - SAFETY REQUIREMENTS FOR TRANSPORTATION, STORAGE, HANDLING AND USE OF COMMERCIAL EXPLOSIVES AND BLASTING AGENTS (FOR VERSIONS 1998 AND 2011) |
|
ASTM D 7678 : 2017 : REDLINE
|
Standard Test Method for Total Oil and Grease (TOG) and Total Petroleum Hydrocarbons (TPH) in Water and Wastewater with Solvent Extraction using Mid-IR Laser Spectroscopy |
|
AAMI ST24 : 1999 : R2013
|
AUTOMATIC, GENERAL-PURPOSE ETHYLENE OXIDE STERILIZERS AND ETHYLENE OXIDE STERILANT SOURCES INTENDED FOR USE IN HEALTH CARE FACILITIES |
|
ISO/TS 15453:2017
|
Gas cylinders — Seamless steel and aluminium-alloy gas cylinders — Evaluation of existing gas cylinders and consideration of their safe use in other jurisdictions |
|
AAMI ST41 : 2008
|
ETHYLENE OXIDE STERILIZATION IN HEALTH CARE FACILITIES: SAFETY AND EFFECTIVENESS |
|
SAE J 2851 : 2015
|
RECOVERY EQUIPMENT FOR CONTAMINATED R-134A OR R-1234YF REFRIGERANT FROM MOBILE AUTOMOTIVE AIR CONDITIONING SYSTEMS |
|
ASTM D 5396 : 2004 : R2010
|
Standard Specification for Reclaimed Perchloroethylene |
|
NFPA 30 HDBK : 2018
|
FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE HANDBOOK |
|
NFPA 318 : 2018
|
PROTECTION OF SEMICONDUCTOR FABRICATION FACILITIES |
|
NFPA 30 : 2018
|
FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE |
|
NFPA 40 : 2016
|
STORAGE AND HANDLING OF CELLULOSE NITRATE FILM |
|
NFPA 45 : 2015
|
FIRE PROTECTION FOR LABORATORIES USING CHEMICALS |
|
NFPA 30A : 2018
|
MOTOR FUEL DISPENSING FACILITIES AND REPAIR GARAGES |
|
NFPA 99 HDBK : 2018
|
HEALTH CARE FACILITIES CODE HANDBOOK |
|
NFPA 407 : 2017
|
AIRCRAFT FUEL SERVICING |
|
NFPA 35 : 2016
|
MANUFACTURE OF ORGANIC COATINGS |
|
NFPA 307 : 2016
|
CONSTRUCTION AND FIRE PROTECTION OF MARINE TERMINALS, PIERS, AND WHARVES |
|
NFPA 17A : 2017
|
WET CHEMICAL EXTINGUISHING SYSTEMS |
|
NFPA 2010 : 2015
|
FIXED AEROSOL FIRE-EXTINGUISHING SYSTEMS |
|
NFPA 400 : 2016
|
HAZARDOUS MATERIALS CODE |
|
NFPA 17 : 2017
|
DRY CHEMICAL EXTINGUISHING SYSTEMS |
|
NFPA 2001 : 2018
|
CLEAN AGENT FIRE EXTINGUISHING SYSTEMS |
|
UFC 4-510-01 : Change 2
|
UNIFIED FACILITIES CRITERIA - DESIGN: MILITARY MEDICAL FACILITIES |
|
MIL-PRF-32565 Revision A:2017
|
BATTERY, RECHARGEABLE, SEALED, 6T LITHIUM-ION |
|
ASHRAE GUIDELINE 39 : 2017
|
METHOD OF TEST FOR MEASURING FRACTIONATED COMPOSITIONS OF REFRIGERANT BLENDS |
|
ANSI Z400.1/Z129.1 : 2010
|
HAZARDOUS WORKPLACE CHEMICALS - HAZARD EVALUATION AND SAFETY DATA SHEET AND PRECAUTIONARY LABELING PREPARATION |
|
SAE J 1538 : 2015
|
GLOSSARY OF AUTOMOTIVE INFLATABLE RESTRAINT SYSTEMS |
|
NFPA 1124 : 2017
|
MANUFACTURE, TRANSPORTATION, AND STORAGE OF FIREWORKS AND PYROTECHNIC ARTICLES |
|
ASTM D 8061 : 2016
|
Standard Practice for Handling, Transportation, and Storage of 2-Bromo-3,3,3-Trifluoro-1-Propene (CF3CBr=CH2) |
|
SAE AIR 5690 : 2006
|
RATIONALE FOR REPLACEMENT OF PYROTECHNIC SIGNALING DEVICES IN SURVIVAL KITS ON TRANSPORT CATEGORY AIRCRAFT LIFE RAFTS AND SLIDE-RAFTS |
|
SAE AIR 5742 : 2017
|
PACKAGING AND TRANSPORTATION OF OXYGEN EQUIPMENT |
|
MIL-C-48617 Revision A:1983
|
CARTRIDGE, 20 MM, HIGH EXPLOSIVE, INCENDIARY, M56A4 LOADING, ASSEMBLING AND PACKING |
|
MIL-B-18147 Revision C:1983
|
BOATS AND CRAFT; PREPARATION FOR DELIVERY OF |
|
API 781 : 2016
|
FACILITY SECURITY PLAN METHODOLOGY FOR THE OIL AND NATURAL GAS INDUSTRIES |
|
API 780 : 2013
|
SECURITY RISK ASSESSMENT METHODOLOGY FOR THE PETROLEUM AND PETROCHEMICAL INDUSTRIES |
|
ASTM D 4547 : 2015 : REDLINE
|
Standard Guide for Sampling Waste and Soils for Volatile Organic Compounds |
|
MIL-PRF-83671 Revision B:1997
|
FOAM-IN-PLACE PACKAGING MATERIALS, GENERAL SPECIFICATION FOR |
|
DOD-M-64040 Revision A:1986
|
METHYL DIPHENYLUREA |
|
SAE AS 6163 : 2015
|
TEMPERATURE CONTROLLED CONTAINER - PERFORMANCE REQUIREMENTS AND TEST PARAMETERS |
|
ASTM D 5632/D5632M : 2017 : REDLINE
|
Standard Specification for Halon 1301, Bromotrifluoromethane (CF3Br) |
|
SAE AIR 1059 : 2017
|
OXYGEN CYLINDER QUALITY, SERVICEABILITY, MAINTENANCE TRANSFILLING AND MARKING |
|
ASTM D 7815 : 2017 : REDLINE
|
Standard Practice for Handling, Transportation, and Storage of Halon 1211, Bromochlorodifluoromethane (CF2BrCl) |
|
MIL-DTL-87177 Revision B:2014
|
LUBRICANTS, CORROSION PREVENTIVE COMPOUND, WATER DISPLACING, SYNTHETIC |
|
ASTM D 5616 : 2004 : R2010
|
Standard Specification for Reclaimed Trichloroethylene |
|
NFPA HAZARDOUS MATERIALS RESPONSE HDBK : 2013
|
HAZARDOUS MATERIALS/WEAPONS OF MASS DESTRUCTION RESPONSE HANDBOOK |
|
NFPA 1072:2017
|
HAZARDOUS MATERIALS/WEAPONS OF MASS DESTRUCTION EMERGENCY RESPONSE PERSONNEL PROFESSIONAL QUALIFICATIONS |
|
NFPA 1122 : 2018
|
CODE FOR MODEL ROCKETRY |
|
SAE AS 87132 : 2012(R2018)
|
LUBRICANT, CETYL ALCOHOL, 1-HEXADECANOL, APPLICATION TO FASTENERS |
|
NFPA 1125 : 2017
|
MANUFACTURE OF MODEL ROCKET AND HIGH-POWER ROCKET MOTORS |
|
AAMI ST24 : 1999 : R2005
|
AUTOMATIC, GENERAL-PURPOSE ETHYLENE OXIDE STERILIZERS AND ETHYLENE OXIDE STERILANT SOURCES INTENDED FOR USE IN HEALTH CARE FACILITIES |
|
ANSI A10.7 : 2011
|
SAFETY REQUIREMENTS FOR TRANSPORTATION, STORAGE, HANDLING AND USE OF COMMERCIAL EXPLOSIVES AND BLASTING AGENTS |
|
FM 5320 : 2013
|
DRY CHEMICAL EXTINGUISHING SYSTEMS |
|
ASTM D 6911 : 2015 : REDLINE
|
Standard Guide for Packaging and Shipping Environmental Samples for Laboratory Analysis |
|
ASTM D 5396 : 2004
|
Standard Specification for Reclaimed Perchloroethylene |
|
ASTM E 2601 : 2015 : REDLINE
|
Standard Practice for Radiological Emergency Response |
|
ASTM D 6954 : 2018 : REDLINE
|
Standard Guide for Exposing and Testing Plastics that Degrade in the Environment by a Combination of Oxidation and Biodegradation |
|
ASTM D 5616 : 2004
|
Standard Specification for Reclaimed Trichloroethylene |
|
ASTM D 7887 : 2013
|
Standard Guide for Selection of Substitute, Non-hazardous, Liquid Filling Substances for Packagings Subjected to the United Nations Performance Tests |
|
NFPA 2 : 2016
|
HYDROGEN TECHNOLOGIES CODE |
|
NFPA 301 : 2018
|
SAFETY TO LIFE FROM FIRE ON MERCHANT VESSELS |
|
NFPA 58 : 2017
|
LIQUEFIED PETROLEUM GAS CODE |
|
ICC 2012 INTERNATIONAL BUILDING CODE : 2012
|
INTERNATIONAL BUILDING CODE |
|
ASTM D 7327 : 2017 : REDLINE
|
Standard Specification for HFC Blend B (CH2FCF3, CHF2CF3, and CO2) |
|
NFPA 45 HDBK : 2015
|
FIRE PROTECTION FOR LABORATORIES USING CHEMICALS HANDBOOK |
|
ANSI/AAMI ST79:2017
|
COMPREHENSIVE GUIDE TO STEAM STERILIZATION AND STERILITY ASSURANCE IN HEALTH CARE FACILITIES |
|
NFPA 1 : 2021
|
FIRE CODE |
|
NFPA 498 : 2018
|
SAFE HAVENS AND INTERCHANGE LOTS FOR VEHICLES TRANSPORTING EXPLOSIVES |
|
MIL-A-48690 Base Document:1987
|
ACTUATOR, PISTON, PA532 LOADING, ASSEMBLING, AND PACKING |
|
ANSI A10.7 : 2011
|
SAFETY REQUIREMENTS FOR TRANSPORTATION, STORAGE, HANDLING AND USE OF COMMERCIAL EXPLOSIVES AND BLASTING AGENTS |
|
ASTM D 5396 : 2004 : R2015
|
Standard Specification for Reclaimed Perchloroethylene |
|
AAMI ST24 : 1999 : R2009
|
AUTOMATIC, GENERAL-PURPOSE ETHYLENE OXIDE STERILIZERS AND ETHYLENE OXIDE STERILANT SOURCES INTENDED FOR USE IN HEALTH CARE FACILITIES |
|
SAE ARP 4378 : 2017
|
ACCUMULATOR, HYDRAULIC, WELDED BELLOWS, FACTORY PRE-CHARGED |
|
FAA AC 91-70 : 2016
|
OCEANIC AND REMOTE CONTINENTAL AIRSPACE OPERATIONS |
|
MIL C 48669 : 0
|
CARTRIDGE, 40MM, M918 TP, ESCAPEMENT ASSEMBLY FOR METAL PARTS AND LOADING, ASSEMBLING AND PACKAGING |
|
FAA AC 91-84 : 2009
|
FRACTIONAL OWNERSHIP PROGRAMS |
|
NFPA 1126 : 2016
|
USE OF PYROTECHNICS BEFORE A PROXIMATE AUDIENCE |
|
ASTM D 5616 : 2004 : R2016
|
Standard Specification for Reclaimed Trichloroethylene |
|
MIL-DTL-48360 Revision A:2014
|
CHARGE, PROPELLING, M200, FOR 105 MM HOWITZER, M119 LOADING, ASSEMBLING AND PACKING |
|
MIL-N-246 Revision B:1962
|
NITROGLYCERIN |
|
MIL-A-22262 Revision B:1993
|
ABRASIVE BLASTING MEDIA SHIP HULL BLAST CLEANING |
|
MIL-PRF-32516 Base Document:2015
|
ELECTRONIC TEST EQUIPMENT, INTERMITTENT FAULT DETECTION AND ISOLATION FOR CHASSIS AND BACKPLANE CONDUCTIVE PATHS |
|
NFPA 53 : 2016
|
MATERIALS, EQUIPMENT, AND SYSTEMS USED IN OXYGEN-ENRICHED ATMOSPHERES |
|
SAE AMS A 8576 : 2016
|
ADHESIVE, ACRYLIC BASE, FOR ACRYLIC PLASTIC |
|
SAE ARP 5818 : 2015
|
AIRCRAFT REFUELING VEHICLE DESIGN AND PERFORMANCE REQUIREMENTS |
|
SAE AMS 3066 : 2016
|
COMPOUND, CORROSION-INHIBITING WATER-DISPLACING, SOFT FILM, AEROSOL CANNED |
|
API MPM CH8.3 : 1995
|
MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 8: SAMPLING - SECTION 3: STANDARD PRACTICE FOR MIXING AND HANDLING OF LIQUID SAMPLES OF PETROLEUM AND PETROLEUM PRODUCTS |
|
NFPA 475 : 2017
|
RECOMMENDED PRACTICE FOR ORGANIZING, MANAGING, AND SUSTAINING A HAZARDOUS MATERIALS/WEAPONS OF MASS DESTRUCTION RESPONSE PROGRAM |
|
AAMI ST24:1999(R2018)
|
AUTOMATIC, GENERAL-PURPOSE ETHYLENE OXIDE STERILIZERS AND ETHYLENE OXIDE STERILANT SOURCES INTENDED FOR USE IN HEALTH CARE FACILITIES |
|
ASTM D 7673/D7673M : 2015 : REDLINE
|
Standard Specification for Halon 1211, Bromochlorodifluoromethane (CF2BrCl) |
|
NFPA 921 : 2017
|
GUIDE FOR FIRE AND EXPLOSION INVESTIGATIONS |
|
ASTM F 2995 : 2013
|
Standard Guide for Shipping Possibly Infectious Materials, Tissues, and Fluids |
|
ASTM E 1302 : 2013
|
Standard Guide for Acute Animal Toxicity Testing of Water-Miscible Metalworking Fluids |
|
ASTM D 8134 : 2018
|
Standard Guide for Conducting Internal Hydrostatic Pressure Tests on United Nations (UN) IBC Design Types |
|
ASTM E 1302 : 2013 : R2017
|
Standard Guide for Acute Animal Toxicity Testing of Water-Miscible Metalworking Fluids |
|
ASTM F 963 : 2017 : REDLINE
|
Standard Consumer Safety Specification for Toy Safety |
|
ASTM D 6517 : 2000 : R2012 : EDT 1
|
Standard Guide for Field Preservation of Groundwater Samples |
|
ASTM D 6368 : 2006
|
Standard Specification for Vapor-Degreasing Solvents Based on normal-Propyl Bromide and Technical Grade normal-Propyl Bromide |
|
ASTM D 4995 : 2010
|
Standard Specifications for Electronic and Degreasing Grades of 1,1,2-Trichloro 1,2,2,-Trifluoroethane Solvent |
|
NFPA 58 HDBK : 2017
|
LP-GAS CODE HANDBOOK |
|
NFPA 55 : 2016
|
COMPRESSED GASES AND CRYOGENIC FLUIDS CODE |
|
NASA SPEC 5022:2015
|
NASA MANUFACTURING AND TEST REQUIREMENTS FOR NORMALLY CLOSED PYROVALVES FOR HAZARDOUS FLIGHT SYSTEMS APPLICATIONS |
|
NASA MSFC SPEC 3635 : 2012
|
PYROTECHNIC SYSTEM SPECIFICATION |
|
NASA JSC 20793 : 2017
|
CREWED SPACE VEHICLE BATTERY SAFETY REQUIREMENTS |
|
ASTM D 8060 : 2017 : REDLINE
|
Standard Specification for 2-Bromo-3,3,3-Trifluoro-1-Propene (CF3CBr=CH2) |
|
NFPA 472 : 2018
|
COMPETENCE OF RESPONDERS TO HAZARDOUS MATERIALS/WEAPONS OF MASS DESTRUCTION INCIDENTS |
|
API MPM CH8.3 SPANISH : 1995
|
MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 8: SAMPLING - SECTION 3: STANDARD PRACTICE FOR MIXING AND HANDLING OF LIQUID SAMPLES OF PETROLEUM AND PETROLEUM PRODUCTS |
|
MIL-PRF-24596 Revision B:2009
|
COATING COMPOUNDS, NONFLAMING, FIRE-RESISTANT |
|
NFPA 1405 : 2016
|
LAND-BASED FIRE DEPARTMENTS THAT RESPOND TO MARINE VESSEL FIRES |
|
15/30264711 DC : 0
|
BS EN ISO 11148-13 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 13: FASTENER DRIVING TOOLS |
|
API 1169 : 2013
|
RECOMMENDED PRACTICE FOR BASIC INSPECTION REQUIREMENTS - NEW PIPELINE CONSTRUCTION |
|
API 3000 : 2014
|
CLASSIFYING AND LOADING OF CRUDE OIL INTO RAIL TANK CARS |
|
ANSI/AAMI ST58:2013(R2018)
|
CHEMICAL STERILIZATION AND HIGH-LEVEL DISINFECTION IN HEALTH CARE FACILITIES |
|
ASTM D 4995 : 2010 : R2015
|
Standard Specification for Electronic and Degreasing Grades of 1,1,2–Trichloro 1,2,2,–Trifluoroethane Solvent |
|
ASTM D 6517 : 2000
|
Standard Guide for Field Preservation of Ground-Water Samples |
|
FAA AC 120-95 : 2016
|
PORTABLE OXYGEN CONCENTRATORS |
|
SAE J 2788 : 2013
|
HFC-134A (R-134A) RECOVERY/RECYCLING/RECHARGING EQUIPMENT FOR MOBILE AIR-CONDITIONING SYSTEMS |
|
MIL-PRF-32143 Revision B:2011
|
BATTERIES, STORAGE: AUTOMOTIVE, VALVE REGULATED LEAD ACID (VRLA) |
|
AWWA B512 : 2015
|
SULFUR DIOXIDE |
|
FAA AC 133-1 : 2017
|
ROTORCRAFT EXTERNAL-LOAD OPERATIONS |
|
NFPA 1123 : 2018
|
Code for Fireworks Display
|
|
ASTM D 5998 : 2016 : REDLINE
|
Standard Specification for Molded Polyethylene Shipping and Storage Drums |
|
MIL-PRF-53064 Revision C:2017
|
HOSE ASSEMBLY, ELASTOMER: LIGHTWEIGHT, COLLAPSIBLE; LIQUID FUEL |
|
MIL-DTL-24641 Revision B:2015
|
ACID, HYDROFLUORIC, TECHNICAL |
|
SAE AMS 2821 : 2017
|
SALTS, HEAT-TREATING (FOR METALS) |
|
SAE AS 1046 : 2016
|
MINIMUM STANDARD FOR PORTABLE GASEOUS, OXYGEN EQUIPMENT |
|
SAE J 560 : 2016
|
PRIMARY AND AUXILIARY SEVEN CONDUCTOR ELECTRICAL CONNECTOR FOR TRUCK-TRAILER JUMPER CABLE |
|
ASTM F 1190 : 2018 : REDLINE
|
Standard Guide for Neutron Irradiation of Unbiased Electronic Components |
|
SAE J 2843 : 2013
|
R-1234YF [HFO-1234YF] RECOVERY/RECYCLING/RECHARGING EQUIPMENT FOR FLAMMABLE REFRIGERANTS FOR MOBILE AIR-CONDITIONING SYSTEMS |
|
MIL-A-10840 Revision D:1982
|
ARSENIC TRIOXIDE, TECHNICAL |
|
ANSI A10.7 REDLINE : 2011
|
COMPARISON DOCUMENT OF A10.7 AMERICAN NATIONAL STANDARD - SAFETY REQUIREMENTS FOR TRANSPORTATION, STORAGE, HANDLING AND USE OF COMMERCIAL EXPLOSIVES AND BLASTING AGENTS (FOR VERSIONS 1998 AND 2011) |
|
NFPA 30B : 2015
|
CODE FOR THE MANUFACTURE AND STORAGE OF AEROSOL PRODUCTS |
|
NFPA 385 : 2017
|
TANK VEHICLES FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS |
|
NFPA 513 : 1998
|
MOTOR FREIGHT TERMINALS |
|
MIL-STD-1320 Revision D:2014
|
FOR DESIGNING UNIT LOADS, TRUCKLOADS, RAILCAR LOADS, AND INTERMODAL LOADS FOR AMMUNITION AND EXPLOSIVES |
|
UFC 3-810-01N : Change 1
|
UNIFIED FACILITIES CRITERIA - NAVY AND MARINE CORPS ENVIRONMENTAL ENGINEERING FOR FACILITY CONSTRUCTION |
|
MIL-A-82728 Base Document:1984
|
ALUMINUM POWDER, ATOMIZED (FOR USE IN EXPLOSIVES) |
|
O-E-751 Revision D:2015
|
ETHER, PETROLEUM; TECHNICAL GRADE |
|
NFPA 12 : 2018
|
CARBON DIOXIDE EXTINGUISHING SYSTEMS |
|
API MPM CH8.3 : 1995(R2018)
|
MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 8: SAMPLING - SECTION 3: STANDARD PRACTICE FOR MIXING AND HANDLING OF LIQUID SAMPLES OF PETROLEUM AND PETROLEUM PRODUCTS |
|
NFPA 484 : 2015
|
COMBUSTIBLE METALS |
|
CGA SA 24 : 2012
|
SAFETY ALERT - EMERGENCY MEDICAL SERVICES FILLING OXYGEN OR AIR FOR HUMAN RESPIRATION |
|
SAE AIR 825/8 : 2012
|
CONTINUOUS FLOW OXYGEN SYSTEMS |
|
SAE J 2950 : 2012
|
RECOMMENDED PRACTICES (RP) FOR SHIPPING TRANSPORT AND HANDLING OF AUTOMOTIVE-TYPE BATTERY SYSTEM - LITHIUM ION |
|
SAE ARP 1894 : 2014
|
USEFUL LIFE DETERMINATION FOR CHEMICAL OXYGEN GENERATORS |
|
ASTM D 7326 : 2017 : REDLINE
|
Standard Practice for Handling, Transportation, and Storage of HFC Blend B (CH2FCF3, CHF2 CF3, and CO2) |
|
SAE J 3030 : 2015
|
AUTOMOTIVE REFRIGERANT RECOVERY/RECYCLING/RECHARGING EQUIPMENT INTENDED FOR USE WITH BOTH R-1234YF AND R-134A |
|
SAE J 2810 : 2016
|
HFC-134A (R-134A) REFRIGERANT RECOVERY EQUIPMENT FOR MOBILE AUTOMOTIVE AIR-CONDITIONING SYSTEMS |
|
ASTM E 2169 : 2017 : REDLINE
|
Standard Practice for Selecting Antimicrobial Pesticides for Use in Water-Miscible Metalworking Fluids |
|
NFPA 1 : 2018
|
FIRE CODE |
|
NFPA 1 HDBK : 2015
|
FIRE CODE HANDBOOK |