EN 13813:2002
Current
Current
The latest, up-to-date edition.
Screed material and floor screeds - Screed material - Properties and requirements
Published date
16-10-2002
Publisher
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions, symbols and abbreviations
3.1 Terms and definitions
3.2 Symbols and abbreviations
4 Materials
5 Classification and requirements
5.1 General
5.2 Properties and classification
5.2.1 Compressive strength
5.2.2 Flexural strength
5.2.3 Wear resistance
5.2.4 Surface hardness
5.2.5 Resistance to indentation
5.2.6 Resistance to rolling wheel for screed material
intended to be covered with floor covering
5.2.7 Setting time
5.2.8 Shrinkage and swelling
5.2.9 Consistency
5.2.10 pH-value
5.2.11 Modulus of elasticity in flexure
5.2.12 Bond strength
5.2.13 Impact resistance
5.3 Special characteristics
5.3.1 General
5.3.2 Electrical resistance
5.3.3 Chemical resistance
5.3.4 Reaction to fire
5.3.5 Release of corrosive substances or corrosiveness
of screed materials
5.3.6 Water vapour permeability
5.3.7 Thermal resistance
5.3.8 Water permeability
5.3.9 Impact sound insulation
5.3.10 Sound absorption
5.3.11 Other characteristics
6 Evaluation of conformity
6.1 General requirements
6.2 Initial type tests
6.3 Factory Production Control (FPC)
6.3.1 General
6.3.2 Process control
6.3.3 Screed material
6.3.4 Traceability
6.3.5 Labelling
6.3.6 Records
7 Designation
8 Marking, labeling and packaging
9 Conformity criteria and assessment procedure
9.1 General requirements
9.2 Conformity criteria for physical, mechanical and
chemical properties and evaluation procedure
9.2.1 General
9.2.2 Statistical conformity criteria
9.2.3 Assessment based on individual results
Annex ZA (informative) - Clauses of this European Standard
addressing essential requirements
or other provisions of EU Directives
ZA.1 Scope and relevant characteristics
ZA.2 Procedures for the attestation of conformity of floor
screed material
ZA.2.1 System(s) of attestation of conformity
ZA.2.2 EC Certificate and Declaration of conformity
ZA.3 CE conformity marking
Bibliography
It defines for fresh screed material the performance related to working time, consistency, pH value and for hardened screed material, compressive strength, flexural strength, wear resistance, surface hardness, resistance to uindentation, resistance to rolling wheel, shrinkage and swelling, modulus of elasticity and bond strength. It provides for the evaluation of conformity of the product to this draft European standard. The marking requirements for products covered by this draft European standard are included. This standard covers screed materials as defined in prEN 13318.
| Committee |
CEN/TC 303
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| DIN EN 13813:2003-01 | Identical |
| NF EN 13813 : 2003 | Identical |
| UNI EN 13813 : 2004 | Identical |
| BS EN 13813:2002 | Identical |
| PN EN 13813 : AUG 2003 | Identical |
| SN EN 13813 : 2002 | Identical |
| NS EN 13813 : 2002 + NA 2011 | Identical |
| NEN EN 13813 : 2002 | Identical |
| I.S. EN 13813:2002 | Identical |
| NBN EN 13813 : 2002 | Identical |
| UNE-EN 13813:2014 | Identical |
| UNE-EN 13813:2003 | Identical |
| DIN EN 16566 E : 2014 | PAINTS AND VARNISHES - FILLERS FOR INTERNAL AND/OR EXTERNAL WORKS - ADAPTION OF FILLERS TO EUROPEAN STANDARDS |
| BS EN 50085-2-2:2008 | Cable trunking systems and cable ducting systems for electrical installations Particular requirements for cable trunking systems and cable ducting systems intended for mounting underfloor, flushfloor, or onfloor |
| PREN 1504-2 : DRAFT 2015 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS FOR CONCRETE |
| DIN EN 16566:2014-08 | PAINTS AND VARNISHES - FILLERS FOR INTERNAL AND/OR EXTERNAL WORKS - ADAPTION OF FILLERS TO EUROPEAN STANDARDS |
| PREN 13454-2 : DRAFT 2017 | BINDERS AND FACTORY MADE MIXTURES FOR FLOOR SCREEDS BASED ON CALCIUM SULPHATE - PART 2: TEST METHODS |
| DIN EN 1504-2:2015-03 (Draft) | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS FOR CONCRETE |
| DIN EN 14879-1 E : 2005 | ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 1: TERMINOLOGY, DESIGN AND PREPARATION OF SUBSTRATE |
| UNE-EN 13892-3:2016 | Methods of test for screed materials - Part 3: Determination of wear resistance - Böhme |
| BS EN 13892-4:2002 | Methods of test for screed materials Determination of wear resistance-BCA |
| DIN EN 14879-1:2005-12 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 1: Terminology, design and preparation of substrate |
| BS EN 13892-1:2002 | Methods of test for screed materials Sampling, making and curing specimens for test |
| BS EN 14879-5:2007 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Linings on concrete components |
| EN 50085-2-2:2008 | Cable trunking systems and cable ducting systems for electrical installations - Part 2-2: Particular requirements for cable trunking systems and cable ducting systems intended for mounting underfloor, flushfloor, or onfloor |
| DIN EN 13892-7:2003-09 | METHODS OF TEST FOR SCREED MATERIALS - PART 7: DETERMINATION OF WEAR RESISTANCE TO ROLLING WHEEL OF SCREED MATERIAL WITH FLOOR COVERINGS |
| DIN EN 13892-3:2015-03 | METHODS OF TEST FOR SCREED MATERIALS - PART 3: DETERMINATION OF WEAR RESISTANCE - BOHME |
| ONORM EN 13454-2 : 2007 | BINDERS, COMPOSITE BINDERS AND FACTORY MADE MIXTURES FOR FLOOR SCREEDS BASED ON CALCIUM SULFATE - PART 2: TEST METHODS |
| CEI EN 50085-2-2 : 2010 | CABLE TRUNKING SYSTEMS AND CABLE DUCTING SYSTEMS FOR ELECTRICAL INSTALLATIONS - PART 2-2: PARTICULAR REQUIREMENTS FOR CABLE TRUNKING SYSTEMS AND CABLE DUCTING SYSTEMS INTENDED FOR MOUNTING UNDERFLOOR, FLUSHFLOOR, OR ONFLOOR |
| I.S. EN 50085-2-2:2008 | CABLE TRUNKING SYSTEMS AND CABLE DUCTING SYSTEMS FOR ELECTRICAL INSTALLATIONS - PART 2-2: PARTICULAR REQUIREMENTS FOR CABLE TRUNKING SYSTEMS AND CABLE DUCTING SYSTEMS INTENDED FOR MOUNTING UNDERFLOOR, FLUSHFLOOR, OR ONFLOOR |
| BS EN 16566:2014 | Paints and varnishes. Fillers for internal and/or external works. Adaptation of fillers to European standards |
| PREN 13454-1 : DRAFT 2017 | BINDERS AND FACTORY MADE MIXTURES FOR FLOOR SCREEDS BASED ON CALCIUM SULPHATE - PART 1: DEFINITIONS AND REQUIREMENTS |
| I.S. EN 13454-2:2004 | BINDERS, COMPOSITE BINDERS AND FACTORY MADE MIXTURES FOR FLOOR SCREEDS BASED ON CALCIUM SULFATE - PART 2: TEST METHODS |
| PREN 13892-9 : DRAFT 2017 | METHODS OF TEST FOR SCREED MATERIALS - PART 9: DETERMINATION OF SHRINKAGE AND SWELLING |
| DIN EN 14879-5 E : 2007 | ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 5: LININGS ON CONCRETE COMPONENTS |
| DIN EN 14016-2:2004-04 | Binders for magnesite screeds - Caustic magnesia and magnesium chloride - Part 2: Test methods; German version EN 14016-2:2004 |
| I.S. EN 13892-3:2014 | METHODS OF TEST FOR SCREED MATERIALS - PART 3: DETERMINATION OF WEAR RESISTANCE - BOHME |
| DIN EN 14016-1:2004-04 | Binders for magnesite screeds - Caustic magnesia and magnesium chloride - Part 1: Definitions, requirements; German version EN 14016-1:2004 |
| 14/30297859 DC : DRAFT AUG 2014 | BS EN 13892-3 - METHODS OF TEST FOR SCREED MATERIALS - PART 3: DETERMINATION OF WEAR RESISTANCE - BOHME |
| UNI EN 16566 : 2014 | PAINTS AND VARNISHES - FILLERS FOR INTERNAL AND/OR EXTERNAL WORKS - ADAPTATION OF FILLERS TO EUROPEAN STANDARDS |
| I.S. EN 16893:2018 | CONSERVATION OF CULTURAL HERITAGE - SPECIFICATIONS FOR LOCATION, CONSTRUCTION AND MODIFICATION OF BUILDINGS OR ROOMS INTENDED FOR THE STORAGE OR USE OF HERITAGE COLLECTIONS |
| I.S. EN 16566:2014 | PAINTS AND VARNISHES - FILLERS FOR INTERNAL AND/OR EXTERNAL WORKS - ADAPTATION OF FILLERS TO EUROPEAN STANDARDS |
| 04/30109196 DC : DRAFT FEB 2004 | EN 14879 - ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 1: TERMINOLOGY, DESIGN AND PREPARATION OF SUBSTRATE |
| I.S. EN 13892-8:2002 | METHODS OF TEST FOR SCREED MATERIALS - PART 8: DETERMINATION OF BOND STRENGTH |
| 17/30357424 DC : 0 | BS EN 13454-2 - BINDERS AND FACTORY MADE MIXTURES FOR FLOOR SCREEDS BASED ON CALCIUM SULPHATE - PART 2: TEST METHODS |
| DIN EN 14879-3 E : 2007 | ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 3: COATINGS ON CONCRETE COMPONENTS |
| DIN EN 13454-1:2005-01 | Binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate - Part 1: Definitions and requirements; German version EN 13454-1:2004 |
| BS EN 14016-1:2004 | Binders for magnesite screeds. Caustic magnesia and magnesium chloride Definitions, requirements |
| BS EN 1504-2:2004 | Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Surface protection systems for concrete |
| DIN EN 1504-2:2005-01 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete; German version EN 1504-2:2004 |
| EN 13454-2:2003+A1:2007 | Binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate - Part 2: Test methods |
| EN 13892-5:2003 | Methods of test for screed materials - Part 5: Determination of wear resistance to rolling wheel of screed material for wearing layer |
| EN 13892-3:2014 | Methods of test for screed materials - Part 3: Determination of wear resistance - Böhme |
| 13/30276214 DC : 0 | BS EN 16566 - PAINTS AND VARNISHES - FILLERS FOR INTERNAL AND/OR EXTERNAL WORKS - ADAPTATION OF FILLERS TO EUROPEAN STANDARDS |
| 17/30351971 DC : 0 | BS EN 13892-9 - METHODS OF TEST FOR SCREED MATERIALS - PART 9: DETERMINATION OF SHRINKAGE AND SWELLING |
| DIN EN 13454-2:2007-11 | BINDERS, COMPOSITE BINDERS AND FACTORY MADE MIXTURES FOR FLOOR SCREEDS BASED ON CALCIUM SULFATE - PART 2: TEST METHODS |
| 15/30316975 DC : 0 | BS EN 1504-2 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS FOR CONCRETE |
| 17/30357436 DC : 0 | BS EN 13454-1 - BINDERS AND FACTORY MADE MIXTURES FOR FLOOR SCREEDS BASED ON CALCIUM SULPHATE - PART 1: DEFINITIONS AND REQUIREMENTS |
| UNE-EN 1504-2:2005 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete |
| BS EN 14879-1:2005 | 0rganic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Terminology, design and preparation of substrate |
| BS EN 14879-3:2006 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Coatings on concrete components |
| BS EN 13892-3:2014 | Methods of test for screed materials Determination of wear resistance. Böhme |
| BS EN 13892-7:2003 | Methods of test for screed materials Determination of wear resistance to rolling wheel of screed material with floor coverings |
| BS EN 13454-1:2004 | Binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate Definitions and requirements |
| BS EN 13892-6:2002 | Methods of test for screed materials Determination of surface hardness |
| EN 13892-4:2002 | Methods of test for screed materials - Part 4: Determination of wear resistance-BCA |
| EN 13892-6:2002 | Methods of test for screed materials - Part 6: Determination of surface hardness |
| EN 14879-3:2006 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 3: Coatings on concrete components |
| EN 14879-5:2007 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 5: Linings on concrete components |
| EN 13892-7:2003 | Methods of test for screed materials - Part 7: Determination of wear resistance to rolling wheel of screed material with floor coverings |
| EN 14016-2 : 2004 | BINDERS FOR MAGNESITE SCREEDS - CAUSTIC MAGNESIA AND MAGNESIUM CHLORIDE - PART 2: TEST METHODS |
| EN 13892-1:2002 | Methods of test for screed materials - Part 1: Sampling, making and curing specimens for test |
| EN 16566:2014 | Paints and varnishes - Fillers for internal and/or external works - Adaptation of fillers to European standards |
| EN 1504-2:2004 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete |
| EN 13892-8:2002 | Methods of test for screed materials - Part 8: Determination of bond strength |
| EN 14016-1:2004 | Binders for magnesite screeds - Caustic magnesia and magnesium chloride - Part 1: Definitions, requirements |
| EN 14879-1:2005 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 1: Terminology, design and preparation of substrate |
| EN 13892-2 : 2002 | METHODS OF TEST FOR SCREED MATERIALS - PART 2: DETERMINATION OF FLEXURAL AND COMPRESSIVE STRENGTH |
| BS EN 13892-8:2002 | Methods of test for screed materials Determination of bond strength |
| UNE-EN 16566:2014 | Paints and varnishes - Fillers for internal and/or external works - Adaptation of fillers to European standards |
| PREN 13892-3 : DRAFT 2014 | METHODS OF TEST FOR SCREED MATERIALS - PART 3: DETERMINATION OF WEAR RESISTANCE - BOHME |
| 04/30123574 DC : DRAFT OCT 2004 | EN 14879-3 - ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 3: COATINGS ON CONCRETE COMPONENTS |
| BS EN 13454-2:2003 | Binders, composite binders and factory made mixtures or floor screeds based on calcium sulfate Test methods |
| EN 16893:2018 | Conservation of Cultural Heritage - Specifications for location, construction and modification of buildings or rooms intended for the storage or use of heritage collections |
| BS EN 14016-2:2004 | Binders for magnesite screeds. Caustic magnesia and magnesium chloride Test methods |
| BS EN 13892-2:2002 | Methods of test for screed materials Determination of flexural and compressive strength |
| BS EN 13892-5:2003 | Methods of test for screed materials Determination of wear resistance to rolling wheel of screed material for wearing layer |
| EN 13454-1:2004 | Binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate - Part 1: Definitions and requirements |
| DIN EN 13892-2:2003-02 | METHODS OF TEST FOR SCREED MATERIALS - PART 2: DETERMINATION OF FLEXURAL AND COMPRESSIVE STRENGTH |
| DIN EN 13892-6:2003-02 | Methods of test for screed materials - Part 6: Determination of surface hardness |
| DIN EN 14879-3:2007-02 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 3: Coatings on concrete components |
| DIN EN 13892-8:2003-02 | METHODS OF TEST FOR SCREED MATERIALS - PART 8: DETERMINATION OF BOND STRENGTH |
| DIN EN 13892-5:2003-09 | METHODS OF TEST FOR SCREED MATERIALS - PART 5: DETERMINATION OF WEAR RESISTANCE TO ROLLING WHEEL OF SCREED MATERIAL FOR WEARING LAYER |
| DIN EN 14879-5:2007-10 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 5: Linings on concrete components |
| DIN EN 13892-1:2003-02 | METHODS OF TEST FOR SCREED MATERIALS - PART 1: SAMPLING - MAKING AND CURING SPECIMENS FOR TESTING |
| DIN EN 13892-4:2003-02 | METHODS OF TEST FOR SCREED MATERIALS - PART 4: DETERMINATION OF WEAR RESISTANCE - BCA |
| 93/68/EEC : 1993 AMD 2 1998 | COUNCIL DIRECTIVE 93/68/EEC OF 22.7.93 AMENDING DIRECTIVES 87/404/EEC, 88/378/EEC, 89/106/EEC, 89/336/EEC, 89/392/EEC, 89/686/EEC, 90/384/EEC, 90/385/EEC, 90/396/EEC, 91/263/EEC, 92/42/EEC AND 73/23/EEC |
| EN ISO 6272 : 1994 | PAINTS AND VARNISHES - FALLING-WEIGHT TEST |
| ISO 354:2003 | Acoustics — Measurement of sound absorption in a reverberation room |
| PREN 1504-2 : DRAFT 2015 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS FOR CONCRETE |
| 89/106/EEC : 1988 | COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS |
| EN ISO 178:2010/A1:2013 | PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010/AMD 1:2013) |
| PREN 13454-2 : DRAFT 2017 | BINDERS AND FACTORY MADE MIXTURES FOR FLOOR SCREEDS BASED ON CALCIUM SULPHATE - PART 2: TEST METHODS |
| EN 12524 : 2000 | BUILDING MATERIALS AND PRODUCTS - HYGROTHERMAL PROPERTIES - TABULATED DESIGN VALUES |
| ISO 6272:1993 | Paints and varnishes — Falling-weight test |
| EN ISO 140-6 : 1998 | ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 6: LABORATORY MEASUREMENTS OF IMPACT SOUND INSULATION OF FLOORS |
| EN 12706:1999 | Adhesives - Test methods for hydraulic setting floor smoothing and/or levelling compounds - Determination of flow characteristics |
| EN ISO 354:2003 | Acoustics - Measurement of sound absorption in a reverberation room (ISO 354:2003) |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN 13318:2000 | Screed material and floor screeds - Definitions |
| EN 12664:2001 | Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Dry and moist products of medium and low thermal resistance |
| ISO 9001:2015 | Quality management systems — Requirements |
| EN 1062-3:2008 | Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 3: Determination of liquid water permeability |
| EN 1081:1998 | Resilient floor coverings - Determination of the electrical resistance |
| EN 12086:2013 | Thermal insulating products for building applications - Determination of water vapour transmission properties |
| PREN 13892-3 : DRAFT 2014 | METHODS OF TEST FOR SCREED MATERIALS - PART 3: DETERMINATION OF WEAR RESISTANCE - BOHME |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.