HB 18.28-1991
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Guidelines for third-party certification and accreditation - Guide 28: General rules for a model third-party certification system for products
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
26-06-2021
English
01-01-1991
Identical to the ISO/IEC guides and provides information on product and third-party certification systems. Guidance is given on the establishment, general requirements for, and operation of calibration and testing laboratory accreditation systems. Identical with SANZ HB18.28-1991 and produced as a Joint Australian/New Zealand Standard.
Committee |
QR-010
|
DocumentType |
Handbook
|
ISBN |
0 7262 6891 7
|
Pages |
16
|
PublisherName |
Standards Australia
|
Status |
Superseded
|
SupersededBy | |
UnderRevision |
Standards | Relationship |
ISO/IEC Guide 28:1982 | Identical |
ISO/IEC Guide 28:2004 | Identical |
In Australia First published as HB18.28-1991. In New Zealand First published as HB18.28-1991. In Australia First published as HB18.27-1991. In New Zealand First published as HB18.27-1991.
AS 1646.3-2000 | Elastomeric seals for waterworks purposes - Material requirements for pipe joints seals used in water and wastewater applications with the exception of natural rubber and polyisoprene compounds |
AS 3750.18-2002 | Paints for steel structures Moisture cure urethane (single-pack) systems |
AS/NZS 4671:2001 | Steel reinforcing materials |
AS 1281-2001 | Cement mortar lining of steel pipes and fittings (Reconfirmed 2018) |
AS 3565.5-2004 | Meters for water supply - Water meters with two integral single check valves |
AS/NZS 2908.1:2000 | Cellulose-cement products Corrugated sheets (Reconfirmed 2020) |
AS 1617.1-2003 | Refractory bricks and shapes Fireclay |
AS 3582.2-2001 | Supplementary cementitious materials for use with portland and blended cement Slag - Ground granulated iron blast-furnace |
AS 4751(INT)-2000 | Electrogalvanized (zinc) coatings on ferrous open sections |
AS 2740-2001 | Wedge-type sockets |
AS 5100.5-2004 | Bridge design - Concrete |
AS/NZS 4766(INT):2002 | Polyethylene storage tanks for water and chemicals |
AS/NZS 3584.1:2005 | Diesel engine systems for underground coal mines Fire protected - Heavy duty |
AS 1357.1-2004 | Valves primarily for use in heated water systems - Protection valves |
AS 1085.10-2002 | Railway track material Rail anchors |
AS/NZS 2009:2002 | Glass beads for pavement-marking materials |
AS 1901-2004 | Electroplated coatings - Gold and gold alloys |
AS 2945(INT)-2002 | Batch-type washer/disinfectors for health care facilities |
AS 1646.4-2005 | Elastomeric seals for waterworks purposes Material requirements for pipe joint seals used in water and wastewater applications - Thermoplastic elastomers and vulcanizates |
AS 2319-2001 | Rigging screws and turnbuckles |
AS 1332-2000 | Conveyor belting - Textile reinforced (Reconfirmed 2016) |
AS 1085.13-2002 | Railway track material Spring fastening spikes for sleeper plates (Reconfirmed 2013) |
AS 3600-2001 | Concrete structures |
AS 1410-2003 | Sterilizers - Steam - Pre-vacuum |
AS 1406-2004 | Electroplated coatings - Nickel and chromium on plastics for decorative applications (Reconfirmed 2017) |
AS 2423-2002 | Coated steel wire fencing products for terrestrial, aquatic and general use (Reconfirmed 2021) |
AS 4139-2003 | Fibre-reinforced concrete pipes and fittings (Reconfirmed 2018) |
AS 1085.18-2003 | Railway track material Screw spikes and threaded inserts |
AS 1731.2-2000 | Refrigerated display cabinets General mechanical and physical requirements |
ATS 5200.104-2005 | Appliances (miscellaneous) |
AS 4032.1-2005 | Water supply - Valves for the control of heated water supply temperatures Thermostatic mixing valves - Materials design and performance requirements |
AS/NZS 4692.1:2005 | Electric water heaters Energy consumption, performance and general requirements (Reconfirmed 2016) |
AS/NZS 1546.3:2001 | On-site domestic wastewater treatment units Aerated wastewater treatment systems |
AS/NZS 3582.3:2002 | Supplementary cementitious materials for use with portland and blended cement Amorphous silica |
AS/NZS 4798(INT):2005 | Polyethylene maintenance shafts |
AS 4750(INT)-2000 | Electrogalvanized (zinc) coatings on ferrous hollow sections |
AS/NZS 1518:2002 | External extruded high-density polyethylene coating system for pipes (Reconfirmed 2016) |
AS 4728-2005 | Electric resistance welded steel pipe for pressure purposes (Reconfirmed 2016) |
AS/NZS 1314:2003 | Prestressing anchorages (Reconfirmed 2016) |
AS 1085.17-2003 | Railway Track Material Steel Sleepers (Reconfirmed 2013) |
AS/NZS 4999(INT):2003 | PVC-U maintenance shafts |
AS/NZS 1594:2002 | Hot-rolled steel flat products (Reconfirmed 2016) |
AS 3775.1-2004 | Chain slings - Grade T Product specification |
AS/NZS 4130:2003 | Polyethylene (PE) pipes for pressure applications |
AS/NZS 4765(INT):2000 | Modified PVC (PVC-M) pipes for pressure applications |
AS 1085.2-2002 | Railway track material Fishplates |
AS 3565.2-2004 | Meters for water supply - Combination meters |
AS 1418.10(INT)-2004 | Cranes, hoists and winches Elevating work platforms |
AS 4506-2005 | Metal finishing - Thermoset powder coatings |
AS 1085.3-2002 | Railway track material Sleeper plates (Reconfirmed 2013) |
AS 1646.1-2000 | Elastomeric seals for waterworks purposes - General requirements |
AS/NZS 3584.3:2005 | Diesel engine systems for underground coal mines - Maintenance |
AS 1472-2003 | Carbon steel spring wire for mechanical springs |
AS 4321-2001 | Fusion-bonded medium-density polyethylene coating and lining for pipes and fittings (Reconfirmed 2019) |
AS 3743-2003 | Potting mixes |
AS 1085.14-2003 | Railway track material Prestressed concrete sleepers |
AS/NZS 4130:2001 | Polyethylene (PE) pipes for pressure applications |
AS 1085.1-2002 | Railway track material Steel rails (Reconfirmed 2013) |
AS/NZS 3518:2004 | Acrylonitrile butadiene styrene (ABS) compounds, pipes and fittings for pressure applications |
AS/NZS 4131:2003 | Polyethylene (PE) compounds for pressure pipes and fittings |
AS/NZS 4067:2004 | Firefighters' helmets |
AS 1443-2004 | Carbon and carbon-manganese steel - Cold finished bars (Reconfirmed 2022) |
AS 1085.4-2002 | Railway track material Fishbolts and nuts (Reconfirmed 2013) |
AS/NZS 1221:1997 | Fire hose reels (Reconfirmed 2020) |
AS/NZS 1605:2000 | Methods for sampling and analysing timber preservatives and preservative-treated timber |
AS 4795-2002 | Double-flanged butterfly valves for waterworks purposes |
AS/NZS 4065:2000 | Concrete utility services poles |
AS/NZS 2699.3:2000 | Built-in components for masonry construction Lintels and shelf angles (durability requirements) |
AS 2913-2000 | Evaporative airconditioning equipment (Reconfirmed 2016) |
AS 5039-2003 | Security screen doors and security window grilles |
AS 2266-2002 | Carbon steel spring wire for bedding and seating |
ATS 5200.101-2005 | Appliances (low hazard rating) |
AS/NZS 4677:2000 | Steel utility services poles |
AS 2192-2002 | Sterilizers - Steam - Downward-displacement |
AS/NZS 4129:2000 | Fittings for polyethylene (PE) pipes for pressure applications |
AS 1856-2004 | Electroplated coatings - Silver |
AS/NZS 3718:2005 | Water supply - Tap ware (Reconfirmed 2016) |
AS/NZS 4158:2003 | Thermal-bonded polymeric coatings on valves and fittings for water industry purposes |
AS 4049.3-2005 | Paints and related materials - Pavement marking materials Waterborne paint - For use with surface applied glass beads (Reconfirmed 2016) |
AS/NZS 2280:2004 | Ductile iron pipes and fittings |
AS/NZS 1254:2002 | PVC pipes and fittings for storm and surface water applications |
AS 1192-2004 | Electroplated coatings - Nickel and chromium (Reconfirmed 2017) |
AS 6401-2003 | Knife-gate valves for waterworks purposes (Reconfirmed 2015) |
AS 2429-2004 | Electroplated coatings of rhodium for general engineering applications |
AS 2638.1-2002 | Gate valves for waterworks purposes Metal seated |
AS 4441(INT)-2003 | Oriented PVC (PVC-O) pipes for pressure applications |
AS 4454-2003 | Composts, soil conditioners and mulches |
AS/NZS 2699.3:2002 | Built-in components for masonry construction Lintels and shelf angles (durability requirements) |
AS/NZS 2699.2:2000 | Built-in components for masonry construction Connectors and accessories |
AS/NZS 3718:2003 | Water supply - Tap ware |
AS/NZS 5065:2005 | Polyethylene and polypropylene pipes and fittings for drainage and sewerage applications (Reconfirmed 2017) |
AS 1085.7-2003 | Railway track material Spring washers |
AS 1085.1-2000 | Railway permanent way material Steel rails |
ATS 5200.105-2005 | |
AS 1394-2001 | Round steel wire for ropes |
AS 1646.2-2000 | Elastomeric seals for waterworks purposes Material requirements for pipe joint seals used in water and wastewater applications - Specifies by prescription formulation |
AS 1085.19-2003 | Railway track material Resilient fastening assemblies (Reconfirmed 2013) |
AS/NZS 4131:2001 | Polyethylene (PE) compounds for pressure pipes and fittings |
AS 2321-2001 | Short-link chain for lifting purposes |
AS 1324.1-2001 | Air filters for use in general ventilation and airconditioning Application, performance and construction |
AS 4750-2003 | Electrogalvanized (zinc) coatings on ferrous hollow and open sections (Reconfirmed 2017) |
AS 2638.2-2002 | Gate valves for waterworks purposes - Resilient seated |
AS 3952-2002 | Water supply - Spring hydrant valve for waterworks purposes (Reconfirmed 2015) |
AS 4738.1-2004 | Metal castings - Ferrous sand moulded |
AS 4796-2001 | Water supply - Metal bodied and plastic bodied ball valves for property service connection |
AS/NZS 3584.2:2003 | Diesel engine systems for underground coal mines - Explosion protected |
AS 1085.8-2002 | Railway track material Dogspikes |
AS 4310-2004 | DN 80 piston type vacuum interface valves for municipal sewer systems |
AS 3565.3-2004 | Meters for water supply - Water meters with integral dual check valves |
AS/NZS 2699.1:2000 | Built-in components for masonry construction Wall ties |
AS/NZS 4859.1:2002 | Materials for the thermal insulation of buildings General criteria and technical provisions |
AS 4381-2002 | Single-use face masks for use in health care |
AS 4314-2005 | Founding - Patterns, pattern equipment and coreboxes for the production of sand moulds and sand cores |
AS 1085.12-2002 | Railway track material Insulated joint assemblies (Reconfirmed 2013) |
AS 1085.3-2000 | Railway permanent way material - Part 3: Sleeper plates |
AS 1397-2001 | Steel sheet and strip - Hot-dipped zinc-coated or aluminium/zinc-coated |
AS 2453-2004 | Electroplated coatings - Chromium for engineering applications (Reconfirmed 2017) |
AS 4794-2001 | Non-return valves for waterworks purposes - Swing check and tilting disc (Reconfirmed 2015) |
AS 3705-2003 | Geotextiles - Identification, marking, and general data |
AS 2741-2002 | Shackles |
AS 1579-2001 | Arc-welded steel pipes and fittings for water and wastewater (Reconfirmed 2018) |
AS 3850-2003 | Tilt-up concrete construction |
AS/NZS 1260:2002 | PVC-U pipes and fittings for drain, waste and vent application |
AS 3818.1-2003 | Timber - Heavy structural products - Visually graded General requirements |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.