IEEE DRAFT 1147 : D8 2005
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
GUIDE FOR THE REHABILITATION OF HYDROELECTRIC POWER PLANTS
Withdrawn date
17-10-2023
Published date
12-01-2013
Introduction
1 Overview
1.1 Scope
1.2 Purpose
2 References
3 Definitions
4 General assessment considerations
4.1 General conditions for rehabilitation
4.2 Systems approach to rehabilitation
4.3 Feasibility study
4.4 Plant staffing assessment
5 Rehabilitation of waterways
5.1 General
5.2 Leakage Losses
5.3 Head (Hydraulic) Losses
5.4 Fishery Considerations
5.5 Water Quality
6 Equipment affected by Rehabilitation
6.1 General
6.2 Turbines
6.3 Governors
6.4 Generators
6.5 Excitation Systems
6.6 Generator Main Leads and Switchgear
6.7 Generator Neutral Grounding Equipment
6.8 Main Transformers
6.9 Control and Instrumentation Equipment
6.10 Electrical Equipment Protection
6.11 Auxiliary Power Equipment
6.12 Batteries, Chargers, and DC Distribution Equipment
6.13 Emergency Power Equipment
6.14 Uninterruptible Power Supply (UPS)
6.15 Lighting
6.16 Water Systems
6.17 Station Drainage
6.18 Grounding System
6.19 Cables and Raceways
6.20 Heating, Ventilating and Air Conditioning Systems
6.21 Fire Protection
6.22 Compressed Air System
6.23 Cranes
6.24 Lubrication and Insulating Oil Purification Equipment
6.25 Telephone or other Communication Equipment
6.26 Plant Security
6.27 Machine Shop
Annex A
Specifies alternatives hydroelectric power plant owners should consider when undertaking a rehabilitation of the facilities. It is useful in ensuring that potential improvements are not overlooked in the owner's process.
| DocumentType |
Draft
|
| PublisherName |
Institute of Electrical & Electronics Engineers
|
| Status |
Withdrawn
|
| UL 1236:8ED 2015-04 | Battery Chargers for Charging Engine-Starter Batteries |
| IEEE C37.12-2008 | SPECIFICATION GUIDE FOR AC HIGH-VOLTAGE CIRCUIT BREAKERS BASED ON A SYMMETRICAL CURRENT BASIS |
| IEEE C37.91-2008 REDLINE | IEEE Guide for Protecting Power Transformers |
| NFPA 851 : 2010 | FIRE PROTECTION FOR HYDROELECTRIC GENERATING PLANTS |
| IEEE C62.92.2-1989 | IEEE Guide for the Application of Neutral Grounding in Electrical Utility Systems, Part II - Grounding of Synchronous Generator Systems |
| IEEE C37.14-2015 REDLINE | IEEE Standard for DC (3200 V and below) Power Circuit Breakers Used in Enclosures |
| IEEE C37.20.1-2015 REDLINE | IEEE Standard for Metal-Enclosed Low-Voltage (1000 Vac and below, 3200 Vdc and below) Power Circuit Breaker Switchgear |
| IEC 60545:1976 | Guide for commissioning, operation and maintenance of hydraulic turbines |
| IEEE C37.16-2009 | LOW-VOLTAGE POWER CIRCUIT BREAKERS AND AC POWER CIRCUIT PROTECTORS - PREFERRED RATINGS, RELATED REQUIREMENTS, AND APPLICATION RECOMMENDATIONS |
| IEEE 434-2006 | IEEE Guide for Functional Evaluation of Insulation Systems for AC Electric Machines Rated 2300 V and Above |
| NEMA MG 1 : 2016 | MOTORS AND GENERATORS |
| NEMA MG 2:2014 | Safety Standard for Construction and Guide for Selection, Installation and Use of Electric Motors and Generators |
| IEEE C57.12.01-2015 REDLINE | IEEE Standard for General Requirements for Dry-Type Distribution and Power Transformers |
| IEEE 62-1995 | IEEE Guide for Diagnostic Field Testing of Electric Power Apparatus - Part 1: Oil Filled Power Transformers, Regulators, and Reactors |
| IEEE 762-2006 | IEEE Standard Definitions for Use in Reporting Electric Generating Unit Reliability, Availability, and Productivity |
| UL 1072:4ED 2006-06 | Medium-Voltage Power Cables |
| NEMA MG 10:2017 | Energy Management Guide for Selection and Use of Fixed Frequency Medium AC Squirrel-Cage Polyphase Induction Motors |
| IEEE 1095-2012 REDLINE | IEEE Guide for the Installation of Vertical Generators and Generator/Motors for Hydroelectric Applications |
| ANSI C37.50 : 1989 | SWITCHGEAR - LOW VOLTAGE AC POWER CIRCUIT BREAKERS USED IN ENCLOSURES - TEST PROCEDURES |
| IEEE 421.2-2014 | IEEE Guide for Identification, Testing, and Evaluation of the Dynamic Performance of Excitation Control Systems |
| ANSI C50.12 : 2005 | SYNCHRONOUS GENERATORS AND GENERATOR/MOTORS FOR HYDRAULIC TURBINE APPLICATIONS, REQUIREMENTS FOR SALIENT POLE SYNCHRONOUS |
| IEEE C37.20.2-2015 | IEEE Standard for Metal-Clad Switchgear |
| ASME B30.2 : 2016 | OVERHEAD AND GANTRY CRANES (TOP RUNNING BRIDGE, SINGLE OR MULTIPLE GIRDER, TOP RUNNING TROLLEY HOIST) - SAFETY STANDARD FOR CABLEWAYS, CRANES, DERRICKS, HOISTS, HOOKS, JACKS, AND SLINGS |
| NEMA IB 8 : 1981 | LEAD-ACID INDUSTRIAL STORAGE BATTERIES FOR STATIONARY SERVICE |
| IEEE 1248-1998 | IEEE Guide for the Commissioning of Electrical Systems in Hydroelectric Power Plants |
| NFPA 70B : 2016 | RECOMMENDED PRACTICE FOR ELECTRICAL EQUIPMENT MAINTENANCE |
| IEC TR 61364:1999 | Nomenclature for hydroelectric powerplant machinery |
| ANSI/NEMA WC 51/ICEA P-54-440:2009(R2014) | Ampacities of Cables Installed in Cable Trays |
| ANSI C29.1 : 1988 | TEST METHODS FOR ELECTRICAL POWER INSULATORS |
| ANSI C50.10 : 1990 | ROTATING ELECTRICAL MACHINERY - SYNCHRONOUS MACHINES |
| IEC 61116:1992 | Electromechanical equipment guide for small hydroelectric installations |
| IEC 60308:2005 | Hydraulic turbines - Testing of control systems |
| IEEE C57.12.00-2015 | IEEE Standard for General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers |
| IEEE C57.91-2011 REDLINE | IEEE Guide for Loading Mineral-Oil-Immersed Transformers and Step-Voltage Regulators |
| IEEE 421.3-1997 | IEEE Standard for High-Potential Test Requirements for Excitation Systems for Synchronous Machines |
| IEEE 82 : 2002 | TEST PROCEDURE FOR IMPULSE VOLTAGE TESTS ON INSULATED CONDUCTORS |
| IEC 60193:1999 | Hydraulic turbines, storage pumps and pump-turbines - Model acceptance tests |
| IEEE 810-2015 | IEEE Standard for Hydraulic Turbine and Generator Shaft Couplings and Shaft Runout Tolerances |
| ANSI/NEMA PB 2.1:2013 | General Instructions for Proper Handling, Installation, Operation and Maintenance of Deadfront Distribution Switchboards Rated 600 Volts or Less |
| NFPA 907M : 1988 | MANUAL FOR THE DETERMINATION OF ELECTRICAL FIRE CAUSES |
| IEC 60041:1991 | Field acceptance tests to determine the hydraulic performance of hydraulic turbines, storage pumps and pump-turbines |
| NEMA RP 1 : 81(R1987) | RENEWAL PARTS FOR MOTORS AND GENERATORS (PERFORMANCE, SELECTION, AND MAINTENANCE) |
| IEEE C57.12.90-2010 | IEEE Standard Test Code for Liquid-Immersed Distribution, Power, and Regulating Transformers |
| IEEE 4-2013 | IEEE Standard for High-Voltage Testing Techniques |
| IEEE C37.20.3-2013 REDLINE | IEEE Standard for Metal-Enclosed Interrupter Switchgear (1 kV-38 kV) |
| IEEE 242-2001 | IEEE Recommended Practice for Protection and Coordination of Industrial and Commercial Power Systems (IEEE Buff Book) |
| IEEE C37.010-1999 | IEEE Application Guide for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis |
| NEMA VE 1:2017 | Metal Cable Tray Systems |
| IEEE C57.98-2011 | IEEE Guide for Transformer Impulse Tests |
| IEEE C37.13-2015 REDLINE | IEEE Standard for Low-Voltage AC Power Circuit Breakers Used in Enclosures |
| IEEE 80-2013 REDLINE | IEEE Guide for Safety in AC Substation Grounding |
| ANSI C84.1 : 2016 | ELECTRIC POWER SYSTEMS AND EQUIPMENT - VOLTAGE RATINGS (60 HERTZ) |
| ANSI C37.52:1974 | TEST PROCEDURES FOR LOW VOLTAGE AC POWER CIRCUIT PROTECTORS USED IN ENCLOSURES |
| IEEE C2-2017 | NATIONAL ELECTRICAL SAFETY CODE (NESC)(R) |
| IEEE 95-2002 | IEEE Recommended Practice for Insulation Testing of AC Electric Machinery (2300 V and Above) With High Direct Voltage |
| IEEE 1207-2011 | IEEE Guide for the Application of Turbine Governing Systems for Hydroelectric Generating Units |
| IEEE 484-2002 | IEEE Recommended Practice for Installation Design and Installation of Vented Lead-Acid Batteries for Stationary Applications |
| IEEE 142 : 2007 | GROUNDING OF INDUSTRIAL AND COMMERCIAL POWER SYSTEMS |
| NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
| IEEE C37.011-2011 REDLINE | IEEE Guide for the Application of Transient Recovery Voltage for AC High-Voltage Circuit Breakers |
| IEEE 115-2009 REDLINE | IEEE Guide for Test Procedures for Synchronous Machines Part I—Acceptance and Performance Testing Part II—Test Procedures and Parameter Determination for Dynamic Analysis |
| IEEE C37.06-2009 | AC HIGH-VOLTAGE CIRCUIT BREAKERS RATED ON A SYMMETRICAL CURRENT BASIS - PREFERRED RATINGS AND RELATED REQUIRED CAPABILITIES |
| IEEE C37.09-1999 | IEEE Standard Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis |
| IEC 60609:1978 | Cavitation pitting evaluation in hydraulic turbines, storage pumps and pump-turbines |
| ANSI/NEMA PB 1.1:2013 | General Instructions for Proper Installation, Operation and Maintenance of Panelboards Rated 600 V or Less |
| IEEE/IEC 1249-2013 | IEC/IEEE Guide for Computer-based Control for Hydroelectric Power Plant Automation |
| NEMA ICS 2.2 : 83(R1988) | MAINTENANCE OF MOTOR CONTROLLERS AFTER A FAULT CONDITION |
| IEEE 450-2010 REDLINE | IEEE Recommended Practice for Maintenance, Testing, and Replacement of Vented Lead-Acid Batteries for Stationary Applications |
| IEEE 43-2013 REDLINE | IEEE Recommended Practice for Testing Insulation Resistance of Electric Machinery |
| IEC 60805:1985 | Guide for commissioning, operation and maintenance of storage pumps and of pump-turbines operating as pumps |
| IEEE 422-2012 | IEEE Guide for the Design of Cable Raceway Systems for Electric Generating Facilities |
| IEEE 112-2004 | IEEE Standard Test Procedure for Polyphase Induction Motors and Generators |
| ANSI C92.1 : 1982 | POWER SYSTEMS - INSULATION COORDINATION |
| IEC 61362:2012 | Guide to specification of hydraulic turbine governing systems |
| IEEE C57.12.91-2011 | IEEE Standard Test Code for Dry-Type Distribution and Power Transformers |
| NEMA ICS 2.3 : 1995(R2008) | INDUSTRIAL CONTROL AND SYSTEMS: INSTRUCTIONS FOR THE HANDLING, INSTALLATION, OPERATION AND MAINTENANCE OF MOTOR CONTROL CENTERS |
| IEEE C57.94-1982 | IEEE Recommended Practice for Installation, Application, Operation, and Maintenance of Dry-Type General Purpose Distribution and Power Transformers |
| IEEE 286-2000 | IEEE Recommended Practice for Measurement of Power Factor Tip-Up of Electric Machinery Stator Coil Insulation |
| ANSI C37.9 : A70 | TEST CD/AC HI-VOLTAGE CB RATED TOTAL CURRENT BASIS |
| IEEE C57.116-2014 | IEEE Guide for Transformers Directly Connected to Generators |
| IEEE 400-2012 REDLINE | IEEE Guide for Field Testing and Evaluation of the Insulation of Shielded Power Cable Systems Rated 5 kV and Above |
| IEEE C57.12.56-1986 | IEEE Standard Test Procedure for Thermal Evaluation of Insulation Systems for Ventilated Dry-Type Power and Distribution Transformers |
| IEEE C37.04-1999 | IEEE Standard Rating Structure for AC High-Voltage Circuit Breakers |
| IEEE 485-2010 | IEEE Recommended Practice for Sizing Lead-Acid Batteries for Stationary Applications |
| NEMA PE 5:1997(R2003) | Utility-Type Battery Chargers |
| IEEE 141 : 1993 | IEEE Recommended Practice for Electric Power Distribution for Industrial Plants |
| IEEE C37.96-2012 | IEEE Guide for AC Motor Protection |
| IEEE C57.106-2006 | IEEE Guide for Acceptance and Maintenance of Insulating Oil in Equipment |
| IEEE C37.101-2006 REDLINE | IEEE Guide for Generator Ground Protection |
| NEMA WC 50-1976/ICEA P-53-426 Second Edition (R1993, R1999) | AMPACITIES INCLUDING EFFECT OF SHIELD LOSSES FOR SINGLE-CONDUCTOR SOLID-DIELECTRIC POWER CABLE, 15 KV THROUGH 69 KV (COPPER AND ALUMINUM CONDUCTORS) |
| IEEE C57.131-2012 | IEEE Standard Requirements for Tap Changers |
| IEEE 367-2012 | IEEE Recommended Practice for Determining the Electric Power Station Ground Potential Rise and Induced Voltage from a Power Fault |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.