Standard Guide for Testing Coil Coatings

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

07-07-2022

Publisher

American Society for Testing and Materials

1.1This guide covers procedures for testing coil coatings. The test methods included are listed in Table 1. Where more than one test method is listed for the same characteristic, no attempt is made to indicate superiority of one method over another. Selection of test methods to be followed must be governed by the requirements in each individual case, together with agreement between the producer and user.

1.2The values stated in SI units are to be regarded as standard. The values given in parentheses are for information only.

1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee	D 01
DocumentType	Guide
Pages	11
PublisherName	American Society for Testing and Materials
Status	Current
Supersedes	ASTM D 3794 : 2018

ASTM G 195 : 2022	Standard Guide for Conducting Wear Tests Using a Rotary Platform Abraser
ASTM D 5796 : 2020	Standard Test Method for Measurement of Dry Film Thickness of Thin-Film Coil-Coated Systems by Destructive Means Using a Boring Device

ASTM D 1824 : 2024	Standard Test Method for Apparent Viscosity of Plastisols and Organosols at Low Shear Rates
ASTM D 3363 : 2022	Standard Test Method for Film Hardness by Pencil Test
ASTM G 90 : 2017	Standard Practice for Performing Accelerated Outdoor Weathering of Materials Using Concentrated Natural Sunlight
ASTM E 1918 : 2021	Standard Test Method for Measuring Solar Reflectance of Horizontal and Low-Sloped Surfaces in the Field
ASTM E 84 : 2023 : REV D	Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM D 2697 : 2022	Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings
ASTM D 4147 : 2018 : R2023	Standard Practice for Applying Coil Coatings Using Wire-Wound Drawdown Bars
ASTM D 2244 : 2021	Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM G 87 : 2002 : R2023	Standard Practice for Conducting Moist SO<inf>2</inf> Tests
ASTM D 6093 : 1997 : R2022	Standard Test Method for Percent Volume Nonvolatile Matter in Clear or Pigmented Coatings Using a Helium Gas Pycnometer
ASTM E 1356 : 2023	Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry
ASTM D 4146 : 2010 : R2022	Standard Test Method for Formability of Zinc-Rich Primer/Chromate Complex Coatings on Steel
ASTM D 2454 : 2023	Standard Practice for Determining the Effect of Overbaking on Organic Coatings
ASTM C 1549 : 2016	Standard Test Method for Determination of Solar Reflectance Near Ambient Temperature Using a Portable Solar Reflectometer
ASTM E 84 : 2023 : REV C	Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM D 3003 : 2001 : R2016	Standard Test Method for Pressure Mottling and Blocking Resistance of Organic Coatings on Metal Substrates
ASTM G 90 : 2023	Standard Practice for Performing Accelerated Outdoor Weathering of Materials Using Concentrated Natural Sunlight
ASTM D 2244 : 2023	Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D 6093 : 1997 : R2016	Standard Test Method for Percent Volume Nonvolatile Matter in Clear or Pigmented Coatings Using a Helium Gas Pycnometer
ASTM G 154 : 2016	Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials
ASTM G 85 : 2019	Standard Practice for Modified Salt Spray (Fog) Testing
ASTM D 2794 : 1993 : R2024	Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact)
ASTM D 1200 : 2023	Standard Test Method for Viscosity by Ford Viscosity Cup
ASTM D 1200 : 2010 : R2018	Standard Test Method for Viscosity by Ford Viscosity Cup
ASTM D 5531 : 2017	Standard Guide for Preparation, Maintenance, and Distribution of Physical Product Standards for Color and Geometric Appearance of Coatings
ASTM D 1824 : 2016	Standard Test Method for Apparent Viscosity of Plastisols and Organosols at Low Shear Rates
ASTM D 6491 : 2009 : R2023	Standard Practice for Evaluation of Aging Resistance of Prestressed Prepainted Metal In a Dry Heat Test
ASTM D 2454 : 2018	Standard Practice for Determining the Effect of Overbaking on Organic Coatings
ASTM E 284 : 2022	Standard Terminology of Appearance
ASTM E 84 : 2023	Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM D 5531 : 2017 : R2023	Standard Guide for Preparation, Maintenance, and Distribution of Physical Product Standards for Color and Geometric Appearance of Coatings
ASTM E 70 : 2019	Standard Test Method for pH of Aqueous Solutions With the Glass Electrode
ASTM D 7639 : 2010 : R2018	Standard Test Method for Determination of Zirconium Treatment Weight or Thickness on Metal Substrates by X-Ray Fluorescence
ASTM D 4147 : 2018	Standard Practice for Applying Coil Coatings Using Wire-Wound Drawdown Bars
ASTM D 6491 : 2009 : R2016	Standard Practice for Evaluation of Aging Resistance of Prestressed Prepainted Metal In a Dry Heat Test
ASTM G 154 : 2023	Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Materials
ASTM E 84 : 2022	Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM D 968 : 2022	Standard Test Methods for Abrasion Resistance of Organic Coatings by Falling Abrasive
ASTM D 2697 : 2003 : R2021	Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings
ASTM D 1210 : 2005 : R2022	Standard Test Method for Fineness of Dispersion of Pigment-Vehicle Systems by Hegman-Type Gage
ASTM D 7639 : 2022	Standard Test Method for Determination of Zirconium Treatment Weight or Thickness on Metal Substrates by X-Ray Fluorescence
ASTM G 152 : 2013 : R2021	Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
ASTM D 2369 : 2020	Standard Test Method for Volatile Content of Coatings
ASTM D 6665 : 2009 : R2019	Standard Practice for Evaluation of Aging Resistance of Pre-stressed Prepainted Metal in a Boiling Water Test
ASTM D 3359 : 2022	Standard Test Methods for Rating Adhesion by Tape Test
ASTM D 4214 : 2023	Standard Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films
ASTM D 1210 : 2005 : R2014	Standard Test Method for Fineness of Dispersion of Pigment-Vehicle Systems by Hegman-Type Gage
ASTM G 155 : 2021	Standard Practice for Operating Xenon Arc Lamp Apparatus for Exposure of Materials
ASTM D 822 : 2023	Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings
ASTM D 4287 : 2000 : R2019	Standard Test Method for High-Shear Viscosity Using a Cone/Plate Viscometer
ASTM D 6665 : 2024	Standard Practice for Evaluation of Aging Resistance of Pre-stressed Prepainted Metal in a Boiling Water Test
ASTM D 4212 : 2016 : R2023	Standard Test Method for Viscosity by Dip-Type Viscosity Cups
ASTM E 1164 : 2012 : R2023 : EDT 1	Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation
ASTM D 4214 : 2007 : R2015	Standard Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films
ASTM B 117 : 2019	Standard Practice for Operating Salt Spray (Fog) Apparatus
ASTM D 5031 : 2023	Standard Practice for Enclosed Carbon-Arc Exposure Tests of Paint and Related Coatings
ASTM G 153 : 2013 : R2021	Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
ASTM D 2369 : 2024	Standard Test Method for Volatile Content of Coatings
ASTM E 1980 : 2011 : R2019	Standard Practice for Calculating Solar Reflectance Index of Horizontal and Low-Sloped Opaque Surfaces
ASTM D 3003 : 2001 : R2022	Standard Test Method for Pressure Mottling and Blocking Resistance of Organic Coatings on Metal Substrates
ASTM E 1356 : 2008 : R2014	Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry (Withdrawn 2023)
ASTM E 308 : 2018	Standard Practice for Computing the Colors of Objects by Using the CIE System
ASTM D 2244 : 2022	Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D 7897 : 2018	Standard Practice for Laboratory Soiling and Weathering of Roofing Materials to Simulate Effects of Natural Exposure on Solar Reflectance and Thermal Emittance
ASTM E 1164 : 2023	Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation
ASTM E 84 : 2023 : REV B	Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM D 4587 : 2023	Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings
ASTM D 1823 : 2024	Standard Test Method for Apparent Viscosity of Plastisols and Organosols at High Shear Rates by Extrusion Viscometer
ASTM C 1549 : 2016 : R2022	Standard Test Method for Determination of Solar Reflectance Near Ambient Temperature Using a Portable Solar Reflectometer
ASTM D 4146 : 2010 : R2018	Standard Test Method for Formability of Zinc-Rich Primer/Chromate Complex Coatings on Steel
ASTM G 87 : 2002 : R2018	Standard Practice for Conducting Moist SO<inf>2</inf> Tests
ASTM D 4287 : 2000 : R2023	Standard Test Method for High-Shear Viscosity Using a Cone/Plate Viscometer
ASTM D 2197 : 2016	Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion
ASTM D 3359 : 2023	Standard Test Methods for Rating Adhesion by Tape Test
ASTM D 2794 : 1993 : R2019	Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact)
ASTM D 4587 : 2011 : R2019 : EDT 1	Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings
ASTM E 84 : 2023 : REV A	Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM E 308 : 2022	Standard Practice for Computing the Colors of Objects by Using the CIE System
ASTM D 4145 : 2010 : R2022	Standard Test Method for Coating Flexibility of Prepainted Sheet
ASTM D 1823 : 2016	Standard Test Method for Apparent Viscosity of Plastisols and Organosols at High Shear Rates by Extrusion Viscometer
ASTM D 3359 : 2017	Standard Test Methods for Rating Adhesion by Tape Test
ASTM E 1164 : 2012 : R2017 : EDT 1	Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation
ASTM E 284 : 2017	Standard Terminology of Appearance
ASTM E 1640 : 2023	Standard Test Method for Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysis
ASTM E 1640 : 2018	Standard Test Method for Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysis
ASTM D 4145 : 2010 : R2018	Standard Test Method for Coating Flexibility of Prepainted Sheet
ASTM D 7897 : 2018 : R2023	Standard Practice for Laboratory Soiling and Weathering of Roofing Materials to Simulate Effects of Natural Exposure on Solar Reflectance and Thermal Emittance
ASTM E 70 : 2024	Standard Test Method for pH of Aqueous Solutions With the Glass Electrode
ASTM D 2197 : 2016 : R2022	Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion
ASTM D 4212 : 2016	Standard Test Method for Viscosity by Dip-Type Viscosity Cups