BS 3763:1976

Superseded

View Superseded by

The International System of units (SI)

Available format(s)

Hardcopy

Superseded date

23-07-2013

Language(s)

English

Published date

30-09-1976

Publisher

British Standards Institution

Basic features of the SI as promulgated by the Bureau International des Poids et Mesures in 1973, and incorporating subsequent decisions of the Conférence Générale des Poids et Mesures up to the end of 1975. Appendices: units outside the SI recognized for use with the system; bibliography; organs of the Metre Convention (BIPM, CIPM, CGPM).

Committee	SS/7
DocumentType	Standard
Pages	0
PublisherName	British Standards Institution
Status	Superseded
SupersededBy	BS 5555:1981
Supersedes	BS 3763:1964 BS 3763:1970

BS S 153:1976	Specification. 2½% nickel-chromium-molybdenum steel billets, bars, forgings and parts (1230-1430 MPa: limiting ruling section 40 mm)
BS 2S 129:1976	Specification for 18/9 chromium-nickel corrosion-resisting steel (titanium stabilized) billets, bars, forgings and parts (540 MPa: limiting ruling section 150 mm)
BS 2TA 12:1974	Specification for forging stock of titanium-aluminium-vanadium alloy (tensile strength 900-1160 MPa) (limiting ruling section 150 mm)
BS 2TA 8:1973	Specification for forging stock of commercially pure titanium (tensile strength 540-740 N/mm<sup>2</sup>)
BS 4856-3:1975	Methods for testing and rating fan coil units, unit heaters and unit coolers Thermal and volumetric performance for heating and cooling duties; with additional ducting
BS 4S 106:1976	Specification. 3% chromium-molybdenum steel billets, bars, forgings and parts (930-1080 MPa: limiting ruling section 150 mm) (suitable for nitriding)
BS 1245:1975	Specification for metal door frames (steel)
BS S155(1976) : 1976	AEROSPACE SERIES - SPECIFICATION FOR NICKEL-SILICON-CHROMIUM-MOLYBDENUM-VANADIUM STEEL (VACUUM ARC REMELTED) BILLETS, BARS, FORGINGS AND PARTS - (1900-2100 MPA: LIMITING RULING SECTION 75 MM)
BS 1206:1974	Specification for fireclay sinks: dimensions and workmanship
BS 4950:1973	Specification for sprayed and fused metal coatings for engineering purposes
BS 2L 505:1973	Specification for bars and extruded sections of magnesium-3% zinc-zirconium alloy (not exceeding 100 mm diameter or minor sectional dimension) (Zn 3.0, Zr 0.6)
BS L 102:1971	Specification for bars and extruded sections of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (not exceeding 200 mm diameter or minor sectional dimension) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
BS 6319-1:1983	Testing of resin and polymer/cement compositions for use in construction Method for preparation of test specimens
BS 5189-3:1975	Dental casting investments Ethyl silicate-bonded investment materials
BS 2T 66:1980	Specification for 18/10 chromium-nickel corrosion-resisting steel tube (niobium stabilized: 550 MPa) (weldable)
BS T 72-T 73:1977	Specifications for 18/10 chromium-nickel corrosion-resisting steel tube for hydraulic purposes (niobium/titanium stabilized: 550 MPa)
BS 9150:1983	Specification for electrical relays of assessed quality: generic data and methods of test
BS 9564:1980	Specification for push-button switches of assessed quality: generic data and methods of test; general rules for the preparation of detail specifications
BS 131-4:1972	Notched bar tests Calibration of pendulum impact testing machines for metals
BS 6047-1:1981	Flame supervision devices for domestic, commercial and catering gas appliances Specification for heat sensitive type
BS 2TA 22:1973	Specification for bar and section for machining of titanium-copper alloy (tensile strength 540-770 N/mm<sup>2</sup>)
BS 3G 100-2.3.5:1972	Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions Explosion-proofness
BS S 154:1976	Specification. 2½% nickel-chromium-molybdenum steel billets, bars, forgings and parts (880-1080 MPa: limiting ruling section 150 mm)
BS L 113:1971	Specification for sheet and strip of aluminium-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (suitable for welding) (Mg 0.8, Si 1, Mn 0.7)
BS 2L 504:1973	Specification for sheet and strip of magnesium-3% zinc-zirconium alloy (Zn 3.0, Zr 0.6)
BS 9521:1983	Specification for removable contacts of assessed quality for electrical connectors as defined by BS 9520: generic data, methods of test and rules for the preparation of detail specifications
BS 2L 509:1973	Specification for tube of magnesium-1¼% zinc-zirconium alloy (suitable for welding by inert-gas shielded arc techniques) (Zn 1.25, Zr 0.6)
BS 792:1973	Specification for mild steel dustbins
BS 2S 131:1977	Specification for high thermal expansion steel billets, bars, forgings and parts (620 MPa: limiting ruling section 150 mm)
BS 1191-2:1973	Specification for gypsum building plasters Premixed lightweight plasters
BS L 512:1973	Specification for bars and extruded sections of magnesium-6% aluminium-zinc alloy (not exceeding 150 mm diameter or minor sectional dimension) (Al 6.0, Zn 1.0)
BS 2TA 9:1973	Specification for forgings of commercially pure titanium (tensile strength 540-740 N/mm<sup>2</sup>)
BS 2S 146:1976	Specification for 4% nickel-chromium-molybdenum air-hardening steel (vacuum arc remelted) billets, bars, forgings and parts (1760-1960 MPa: limiting ruling section 100 mm)
BS 4856-1:1972	Methods for testing and rating fan coil units, unit heaters and unit coolers Thermal and volumetric performance for heating duties; without additional ducting
BS S 157:1976	Specification. 3% nickel-chromium-molybdenum case-hardening steel billets, bars, forgings and parts (1180-1380 MPa)
BS 3251:1976	Specification. Indicator plates for fire hydrants and emergency water supplies
BS 3G 100-2.3.7:1972	Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions Tropical exposure
BS 3T 53:1980	Specification for chromium-molybdenum steel tube (700 MPa) (outside diameter not less than 12.5 mm) (weldable)
BS F 125:1973	Specification for rubber bonded compressed asbestos fibre jointing
BS 5041-1:1987	Fire hydrant systems equipment Specification for landing valves for wet risers
BS 5041-2:1987	Fire hydrant systems equipment Specification for landing valves for dry risers
BS 5421-2:1978	Methods of test for elastomeric threads Polyurethane thread (elastane yarn)
BS 3T 60:1980	Specification for chromium-molybdenum steel tube (1150 MPa) (maximum thickness 8 mm)
BS 567:1973	Specification for asbestos-cement flue pipes and fittings, light quality
BS 2TA 2:1973	Specification for sheet and strip of commercially pure titanium (tensile strength 390-540 N/mm<sup>2</sup>)
BS 2S 137:1976	Specification for high chromium-nickel corrosion-resisting steel bright bars (free machining) (880-1080 MPa: limiting ruling section 70 mm)
BS 476-4:1970	Fire tests on building materials and structures Non-combustibility test for materials
BS 3507:1976	Specification. Orthodontic wire and tape and dental ligature wire
BS 9074 N007:1978	Detail specification for fixed polystyrene film dielectric extended foil capacitors. Rectangular non-metallic case, unidirectional terminations. Full plus additional assessment level
BS T 77:1980	Specification for chromium-molybdenum steel tube (900 MPa) (weldable)
BS 5141-2:1977	Specification for air heating and cooling coils Method of testing for rating of heating coils
BS 2L 77:1971	Specification for forging stock and forgings of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
BS 3G 100-2.3.9:1972	Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions Ice formation
BS 3G 100-2.3.13:1973	Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions Resistance to fire in designated fire zones
BS L 160:1976	Specification. Bars and extruded sections of aluminium-zinc-magnesium-copper-chromium alloy (solution treated and artificially aged to an overaged condition) (Zn 5.6, Mg 2.5, Cu 1.6, Cr 0.22)
BS 4954-2:1978	Methods for testing and rating induction units for air distribution systems Acoustic testing and rating
BS HC105(1974) : 1974	AEROSPACE SERIES - SPECIFICATION FOR 18% CHROMIUM-11% NICKEL-2.5% MOLYBDENUM NIOBIUM-STABILIZED CORROSION-RESISTING STEEL CASTINGS (500 MPA)
BS 9563:1979	Specification for rotary (manual) switches of assessed quality: generic data and methods of test; general rules for the preparation of detail specifications
BS S 151:1975	Specification for chromium-nickel-molybdenum-vanadium heat-resisting steel billets, bars, forgings and parts (930-1130 MPa: limiting ruling section 150 mm) (Cr 12, Ni 2.5, Mo 1.7, V 0.3)
BS 1191-1:1973	Specification for gypsum building plasters Excluding premixed lightweight plasters
BS 9561:1979	Specification for lever operated switches of assessed quality: generic data and methods of test; general rules for the preparation of detail specifications
BS 9520:1983	Specification for electrical connectors of assessed quality for d.c. and low frequency application: generic data, methods of test and capability approval procedures
BS 5247-14:1975	Code of practice for sheet roof and wall coverings Corrugated asbestos-cement
BS 3G 100-2.3.10:1974	Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions Impact icing
BS 3G 100-2.3.11:1973	Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions Water-proofness
BS 2TA 13:1974	Specification for forgings of titanium-aluminium-vanadium alloy (tensile strength 900-1160 MPa) (limiting ruling section 150 mm)
BS 2TA 11:1974	Specification for bar and section for machining of titanium-aluminium-vanadium alloy (tensile strength 900-1160 MPa) (limiting ruling section 150 mm)
BS 1184:1976	Specification. Copper and copper alloy traps
BS 2TA 7:1973	Specification for bar and section for machining of commercially pure titanium (tensile strength 540-740 N/mm<sup>2</sup>)
BS 9210:1984	Specification for radio frequency connectors of assessed quality: generic data and methods of test
BS 2S 149:1976	Specification for 1.75% nickel-chromium-molybdenum steel bars for the manufacture of forged bolts and forged nuts
BS 2TA 6:1973	Specification for sheet and strip of commercially pure titanium (tensile strength 570-730 N/mm<sup>2</sup>)
BS 4856-2:1975	Methods for testing and rating fan coil units, unit heaters and unit coolers Thermal and volumetric performance for cooling duties: without additional ducting
BS L 114:1971	Specification for tube of aluminium-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (not exceeding 10 mm wall thickness) (suitable for welding) (Mg 0.8, Si 1, Mn 0.7)
BS S 156:1976	Specification for 4% nickel-chromium-molybdenum case-hardening steel (vacuum arc remelted) billets, bars, forgings and parts (1320-1520 MPa)
BS 2L 503:1973	Specification for tube of magnesium-6% aluminium-zinc alloy (Al 6.0, Zn 1.0)
BS 2TA 24:1973	Specification for forgings of titanium-copper alloy (tensile strength 540-770 N/mm<sup>2</sup>)
BS 3G 100-2.3.14:1973	Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions Acoustic vibration
BS L 110:1971	Specification for aluminium-coated sheet and strip of aluminium-copper-magnesium-manganese alloy (supplied for solution treatment by the user) (Cu 4.4, Mg 1.5, Mn 0.6)
BS 2TA 23:1973	Specification for forging stock of titanium-copper alloy (tensile strength 540-770 N/mm<sup>2</sup>)
BS L 103:1971	Specification for forging stock and forgings of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
BS 3G 100-2.3.4:1972	Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions Differential pressure requirements
BS 2T 68:1980	Specification for cold drawn 18/10 chromium-nickel corrosion-resisting steel tube (niobium stabilized: 800 MPa) (weldable)
BS 4761:1971	Specification for sprayed unfused metal coatings for engineering purposes
BS TA 49:1973	Specification for bar and section for machining of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1000-1200 N/mm<sup>2</sup>) (limiting ruling section over 100 mm up to and including 150 mm)
BS 2L 508:1973	Specification for bars and extruded sections of magnesium-1¼% zinc-zirconium alloy (suitable for welding by inert-gas shielded arc techniques) (not exceeding 50 mm diameter or minor sectional dimension) (Zn 1.25, Zr 0.6)
BS 2TA 1:1974	Specification for sheet and strip of commercially pure titanium (tensile strength 290-420 MPa)
BS 2S 130:1976	Specification for 18/9 chromium-nickel corrosion-resisting steel (niobium stabilized) billets, bars, forgings and parts (540 MPa: limiting ruling section 150 mm)
BS 5306-1:1976	Fire extinguishing installations and equipment on premises Hydrant systems, hose reels and foam inlets
BS T 76:1978	Specification for chromium-molybdenum steel tube (770 MPa) (weldable)
BS 2S 142:1977	Specification for 1% chromium-molybdenum steel billets, bars, forgings and parts (900-1100 MPa: limiting ruling section 40 mm)
BS S 158:1977	Specification for 1% chromium-molybdenum steel bars for the manufacture of forged bolts and forged nuts
BS 5041-5:1974	Fire hydrant systems equipment Specification for boxes for foam inlets and dry riser inlets
BS 9074 N007:1981	Detail specification for polystyrene film dielectric capacitors, extended foil. Rectangular non-metallic case, unidirectional terminations. Full plus additional assessment level
BS 2S 147:1976	Specification for 0.5% nickel-chromium-molybdenum steel bars for the manufacture of forged bolts and forged nuts

BS 350-2:SUPP1(1967) : 1967	CONVERSION FACTORS AND TABLES - DETAILED CONVERSION TABLES - ADDITIONAL TABLES FOR SI CONVERSIONS
PD 5686:1978	The use of SI units