BS HC 404:1977
|
Specification for chromium-molybdenum alloy cast iron ring pots (suitable for centrifugally cast and sand cast sealing rings, piston rings and cylinder liners)
|
BS HC9(1974) : 1974
|
AEROSPACE SERIES - SPECIFICATION FOR NICKEL-CHROMIUM-MOLYBDENUM STEEL CASTINGS (880-1080 MPA)
|
BS HR 403:1973
|
Specification for nickel-chromium-titanium heat-resisting alloy cold-worked and softened seamless tubes (nickel base, Cr 19.5, Ti 0.4)
|
BS HR 6:1972
|
Specification for nickel-chromium-iron-molybdenum-cobalt-tungsten heat-resisting alloy billets, bars, forgings and parts (nickel base, Cr 21.7, Fe 18.5, Mo 9, Co 1.5, W 0.6)
|
BS HC 2:1973
|
Specification for carbon-manganese steel castings (550 N/mm<sup>2</sup>)
|
BS HR 650:1972
|
Specification for high expansion heat-resisting steel bar and wire for the manufacture of bolts, studs, set screws and nuts (Ni 25.5, Cr 15, Ti 2, Mn 1.5, Mo 1.25, Si 0.7, V 0.3) (limiting ruling section 20 mm)
|
BS HR 204:1972
|
Specification for nickel-chromium-iron-molybdenum-cobalt-tungsten heat-resisting alloy plate, sheet and strip (nickel base Cr 22, Fe 18.5, Mo 9, Co 1.5, W 0.6)
|
BS HC 7:1974
|
Specification for 3% chromium-molybdenum steel castings (880-1080 MPa)
|
BS HC 106:1974
|
Specification for precipitaton hardening chromium-nickel-copper corrosion-resisting steel castings (1250-1500 MPa) (Cr 16, Ni 4, Cu 3)
|
BS HC 402:1977
|
Specification for cast iron ring pots (centrifugally cast) (suitable for piston rings up to 200 mm in diameter)
|
BS HC 401:1974
|
Specification for 18% nickel maraging steel precision castings (1600-1850 MPa)
|
BS HC 301:1973
|
Specification for cobalt base chromium-nickel-tungsten alloy castings (Cr 25.5, Ni 10.5. W 7.5)
|
BS HC 403:1977
|
Specification for high chromium alloy cast iron ring pots (centrifugally cast) (suitable for piston rings up to 400 mm in diameter)
|
BS 1188:1974
|
Specification for ceramic wash basins and pedestals
|
BS HR 4:1972
|
Specification for nickel-chromium-cobalt-aluminium-molybdenum-titanium heat-resisting alloy billets, bars, forgings and parts (nickel base, Cr 15, Co 14.2, Al 5, Mo 4, Ti 4)
|
BS HC 205:1974
|
Specification for precipitation hardening nickel base chromium-cobalt-molybdenum-titanium alloy castings (Cr 20, Co 20, Mo 6, Ti 2)
|
BS HR 251:1974
|
Specification for heat-resisting alloy plate, sheet and strip (Ni 25.5, Cr 14.7, Ti 1.8, Mn 1.5, Mo 1.2, V 0.3, Fe remainder)
|
BS CP118(1969) : 1969 AMD 1129
|
THE STRUCTURAL USE OF ALUMINIUM
|
BS HC 3:1973
|
Specification for 1% chromium-molybdenum low alloy steel castings (700 N/mm<sup>2</sup>)
|
BS HR 404:1973
|
Specification for nickel-cobalt-chromium-molybdenum-titanium-aluminium heat-resisting alloy cold worked solution treated seamless tubes (nickel base, Co 20, Cr 20, Mo 5.9, Ti 2.1, Al 0.5)
|
BS HC8(1974) : 1974
|
AEROSPACE SERIES - SPECIFICATION FOR 3% CHROMIUM-MOLYBDENUM STEEL CASTINGS (1150-1300 MPA)
|
BS HR 51:1973
|
Specification for heat-resisting alloy billets, bars, forgings and parts (Ni 25.5, Cr 14.7, Ti 2, Mn 1.5, Mo 1.2, Si 0.7, V 0.3, Fe remainder)
|
BS 4462:1969
|
Guide for the preparation of technical sales literature for measuring instruments and process control equipment
|
BS HR 53:1973
|
Specification for nickel-iron-chromium-molybdenum-titanium heat-resisting alloy billets, bars, forgings and parts (Ni/Co 42.5, Cr 12.5, Mo 5.8, Ti 3.0, Fe remainder)
|
BS HR 240:1972
|
Specification for cobalt-chromium-tungsten-nickel-manganese heat-resisting alloy plate, sheet and strip (cobalt base Cr 20, W 15, Ni 10, Mn 1.5)
|
BS HC 1:1973
|
Specification for carbon steel castings (500 N/mm<sup>2</sup>)
|
BS HC 5:1973
|
Specification for 3% nickel case hardening steel castings (700 N/mm<sup>2</sup>)
|
BS HC 202:1973
|
Specification for precipitation hardening nickel base chromium-niobium-molybdenum-iron-tungsten alloy castings (Cr 20.0, Nb 6.6, Mo 6.0, Fe 3.0, W 2.5)
|
BS HC 206:1975
|
Specification for precipitation hardening nickel base chromium-cobalt-molybdenum-titanium alloy precision castings (Cr 20, Co 20, Mo 6, Ti 2)
|
BS HR 10:1972
|
Specification for nickel-cobalt-chromium-molybdenum-titanium-aluminium heat-resisting alloy billets, bars, forgings and parts (nickel base, Co 20, Cr 20, Mo 5.9, Ti 2.1, Al 0.5)
|
BS HR 5:1972
|
Specification for nickel-chromium-titanium heat-resisting alloy billets, bars, forgings and parts (nickel base, Cr 19.5, Ti 0.4)
|
BS HR 52:1973
|
Specification for heat-resisting alloy billets, bars, forgings and parts (Ni 25.5, Cr 14.7, Ti 1.8, Mn 1.5, Mo 1.2, V 0.3, Fe remainder)
|
BS HR 40:1972
|
Specification for cobalt-chromium-tungsten-nickel-manganese heat-resisting alloy billets, bars and forgings (cobalt base, Cr 20, W 15, Ni 10, Mn 1.5)
|
BS HR 207:1973
|
Specification for nickel-iron-chromium-molybdenum-aluminium-titanium heat-resisting alloy plate, sheet and strip (Ni/Co 43.5, Cr 16.5, Mo 3.3, Al 1.2, Ti 1.2, Fe remainder)
|
BS HR 3:1972
|
Specification for nickel-cobalt-chromium-molybdenum-aluminium-titanium heat-resisting alloy billets, bars, forgings and parts (nickel base, Co 20, Cr 14.8, Mo 5, Al 4.7, Ti 1.2)
|
BS HC 4:1973
|
Specification for 3% chromium-molybdenum steel castings (620-770 N/mm<sup>2</sup>)
|
BS G 217:1975
|
Specification for general requirements for cockpit lighting controllers
|
BS HC 10:1974
|
Specification for nickel-chromium-molybdenum steel castings (1150-1300 MPa)
|
BS HC 6:1973
|
Specification for 3% chromium-molybdenum nitriding steel castings (850-1000 N/mm<sup>2</sup>)
|
BS HR 206:1973
|
Specification for nickel-cobalt-chromium-molybdenum-titanium-aluminium heat-resisting alloy plate, sheet and strip (nickel base, Co 20, Cr 20, Mo 5.9, Ti 2.1, Al 0.5)
|
BS HR 402:1973
|
Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy cold worked and softened seamless tubes (nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)
|
BS L 105:1971
|
Specification for tube of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (not exceeding 10 mm wall thickness) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
|