EN 1991-1-2:2002/AC:2013
Current
The latest, up-to-date edition.
EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-2: GENERAL ACTIONS - ACTIONS ON STRUCTURES EXPOSED TO FIRE
06-02-2013
Foreword
Section 1 - General
1.1 Scope
1.2 Normative references
1.3 Assumptions
1.4 Distinction between Principles and Application
Rules
1.5 Terms and definitions
1.5.1 Common terms used in Eurocode Fire parts
1.5.2 Special terms relating to design in general
1.5.3 Terms relating to thermal actions
1.5.4 Terms relating to heat transfer analysis
1.6 symbols
Section 2 - Structural Fire design procedure
2.1 General
2.2 Design fire scenario
2.3 Design fire
2.4 Temperature Analysis
2.5 Mechanical Analysis
Section 3 - Thermal actions for temperature analysis
3.1 General rules
3.2 Nominal temperature-time curves
3.2.1 Standard temperature-time curve
3.2.2 External fire curve
3.2.3 Hydrocarbon curve
3.3 Natural fire models
3.3.1 Simplified fire models
3.3.1.1 General
3.3.1.2 Compartment fires
3.3.1.3 Localised fires
3.3.2 Advanced fire models
Section 4 - Mechanical actions for structural analysis
4.1 General
4.2 Simultaneity of actions
4.2.1 Actions from normal temperature design
4.2.2 Additional actions
4.3 Combination rules for actions
4.3.1 General rule
4.3.2 Simplified rules
4.3.3 Load level
Annex A (informative) Parametric temperature-time curves
Annex B (informative) Thermal actions for external
members - Simplified calculation method
B.1 Scope
B.2 Conditions of use
B.3 Effects of wind
B.3.1 Mode of ventilation
B.3.2 Flame deflection by wind
B.4 Characteristics of fire and flames
B.4.1 No forced draught
B.4.2 Forced draught
B.5 Overall configuration factors
Annex C (informative) Localised fires
Annex D (informative) Advanced fire models
D.1 One-zone models
D.2 Two-zone models
D.3 Computational fluid dynamic models
Annex E (informative) Fire load densities
E.1 General
E.2 Determination of fire load densities
E.2.1 General
E.2.2 Definitions
E.2.3 Protected fire loads
E.2.4 Net calorific values
E.2.5 Fire load classification of occupancies
E.2.6 Individual assessment of fire load
densities
E.3 Combustion behaviour
E.4 Rate of heat release Q
Annex F (informative) Equivalent time of fire exposure
Annex G (informative) Configuration factor
G.1 General
G.2 Shadow effects
G.3 External members
Bibliography
Pertains to buildings, with a fire load related to the building and its occupancy.
Committee |
CEN/TC 250
|
DevelopmentNote |
Supersedes ENV 1991-2-2. (12/2002) Supersedes ENV 1991-1-2. (03/2008) To be read in conjunction with EN 1990, EN 1991-1-1, EN 1991-1-3 and EN 1991-1-4. (05/2009)
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Current
|
Supersedes |
Standards | Relationship |
BS EN 1991-1-2:2002 | Identical |
NS EN 1991-1-2 : 2002 AC 2013 | Identical |
SN EN 1991-1-2-NA : 2016 | Identical |
UNE-EN 1991-1-2:2004/AC:2013 | Identical |
I.S. EN 1991-1-2:2002 | Identical |
UNE-EN 1991-1-2:2004 | Identical |
PN EN 1991-1-2 : 2006 AC 2013 | Identical |
UNI EN 1991-1-2 : 2004 | Identical |
NF EN 1991-1-2 : 2003 | Identical |
SN EN 1991-1-2 : 2002 | Identical |
NEN EN 1991-1-2 : 2011 | Identical |
NBN EN 1991 1-2 : 2003 COR 2013 | Identical |
DIN EN 1991-1-2:2010-12 | Identical |
DS EN 1991-1-2 : 2007 COR 2013 | Identical |
UNE-EN 1991-1-2:2019 | Identical |
DIN EN 15254-5 E : 2010 | EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 5: METAL SANDWICH PANEL CONSTRUCTION |
14/30300270 DC : 0 | BS ISO 16733-1 - FIRE SAFETY ENGINEERING - SELECTION OF DESIGN FIRE SCENARIOS AND DESIGN FIRES - PART 1: SELECTION OF DESIGN FIRE SCENARIOS |
04/30124505 DC : 0 | EN 15080-8 - EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - PART 8: BEAMS |
PD CEN/TR 1317-6:2012 | Road restraint systems Pedestrian restraint system. Pedestrian parapets |
I.S. EN 1996-1-2:2005 | EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN (INCLUDING IRISH NATIONAL ANNEX) |
15/30328765 DC : 0 | BS EN 12602 - PREFABRICATED REINFORCED COMPONENTS OF AUTOCLAVED AERATED CONCRETE |
I.S. EN 1993-6:2007 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 6: CRANE SUPPORTING STRUCTURES (INCLUDING IRISH NATIONAL ANNEX) |
BS EN 1090-5:2017 | Execution of steel structures and aluminium structures Technical requirements for cold-formed structural aluminium elements and cold-formed structures for roof, ceiling, floor and wall applications |
S.R. CEN/TR 1317-6:2012 | ROAD RESTRAINT SYSTEMS - PART 6: PEDESTRIAN RESTRAINT SYSTEM - PEDESTRIAN PARAPETS |
BS EN 16869:2017 | Design/construction of Via Ferratas |
16/30330693 DC : 0 | BS EN 15254-5 - EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 5: METAL SANDWICH PANEL CONSTRUCTION |
DIN EN 15254-7:2012-09 | EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING CEILINGS - PART 7: METAL SANDWICH PANEL CONSTRUCTION |
PREN 12871 : DRAFT 2011 | WOOD-BASED PANELS - DETERMINATION OF PERFORMANCE CHARACTERISTICS FOR LOAD BEARING PANELS FOR USE IN FLOORS, ROOFS AND WALLS |
ISO/TS 24679:2011 | Fire safety engineering Performance of structures in fire |
BS EN 1993-4-2 : 2007 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 4-2: TANKS |
DIN EN 15254-5:2010-04 | EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 5: METAL SANDWICH PANEL CONSTRUCTION |
PREN 12602 : DRAFT 2015 | PREFABRICATED REINFORCED COMPONENTS OF AUTOCLAVED AERATED CONCRETE |
UNE-EN 1992-1-2:2011 | Eurocode 2: Design of concrete structures - Part 1-2: General rules - Structural fire design |
UNE-EN 1090-5:2017 | Execution of steel structures and aluminium structures - Part 5: Technical requirements for cold-formed structural aluminium elements and cold-formed structures for roof, ceiling, floor and wall applications |
18/30369304 DC : DRAFT APR 2018 | BS EN 1473 - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS |
14/30297831 DC : 0 | BS EN 1090-4 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 4: TECHNICAL REQUIREMENTS FOR THIN-GAUGE, COLD-FORMED STEEL ELEMENTS AND STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS |
EN 16869:2017/AC:2018 | DESIGN/CONSTRUCTION OF VIA FERRATAS |
ISO/TR 24679-3:2015 | Fire safety engineering Performance of structure in fire Part 3: Example of an open car park |
EN 1993-4-2:2007/A1:2017 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 4-2: TANKS |
EN 15567-1:2015 | Sports and recreational facilities - Ropes courses - Part 1: Construction and safety requirements |
I.S. EN 1991-1-6:2005 | EUROCODE 1 - ACTIONS ON STRUCTURES - PART 1-6: GENERAL ACTIONS - ACTIONS DURING EXECUTION |
DIN EN 1993-1-2:2010-12 | Eurocode 3: Design of steel structures - Part 1-2: General rules - Structural fire design (includes Corrigendum AC:2009) |
DIN EN 14879-1 E : 2005 | ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 1: TERMINOLOGY, DESIGN AND PREPARATION OF SUBSTRATE |
DIN EN 1473:2016-10 | Installation and equipment for liquefied natural gas - Design of onshore installations |
DIN EN 1996-1-2:2011-04 | Eurocode 6: Design of masonry structures - Part 1-2: General rules - Structural fire design (includes Corrigendum AC:2010) |
13/30280057 DC : 0 | BS EN 13782 - TEMPORARY STRUCTURE - TENTS - SAFETY |
BS EN 14620-4:2006 | Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0°C and -165°C Insulation components |
DIN EN 14879-1:2005-12 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 1: Terminology, design and preparation of substrate |
BS EN 13451-1 : 2011 | SWIMMING POOL EQUIPMENT - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS |
DIN EN 1993-6:2010-12 | Eurocode 3: Design of steel structures - Part 6: Crane supporting structures (includes Corrigendum AC:2009) |
DIN EN 15254-2:2009-10 | EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 2: MASONRY AND GYPSUM BLOCKS |
DIN EN 1090-5:2017-07 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR COLD-FORMED STRUCTURAL ALUMINIUM ELEMENTS AND COLD-FORMED STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS |
EN 12602:2016 | Prefabricated reinforced components of autoclaved aerated concrete |
CEN/TR 1317-6 : 2012 | ROAD RESTRAINT SYSTEMS - PART 6: PEDESTRIAN RESTRAINT SYSTEM - PEDESTRIAN PARAPETS |
EN 12871:2013 | Wood-based panels - Determination of performance characteristics for load bearing panels for use in floors, roofs and walls |
I.S. EN 1994-1-2:2005 | EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN |
I.S. EN 16869:2017 | DESIGN/CONSTRUCTION OF VIA FERRATAS |
13/30277104 DC : 0 | BS EN 14389-1 - ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTICAL CHARACTERISTICS |
PREN 16951-2 : DRAFT 2016 | RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTIC CHARACTERISTICS |
I.S. EN 1995-1-2:2005 | EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-2: GENERAL - STRUCTURAL FIRE DESIGN (INCLUDING IRISH NATIONAL ANNEX) |
PREN 1176-1 : DRAFT 2014 | PLAYGROUND EQUIPMENT AND SURFACING - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS |
PD CEN/TR 16949:2016 | Road restraint system. Pedestrian restraint system. Pedestrian parapets |
13/30277107 DC : 0 | BS EN 14389-2 - ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS |
BS ISO 16733-1:2015 | Fire safety engineering. Selection of design fire scenarios and design fires Selection of design fire scenarios |
15/30321787 DC : 0 | BS EN 16869 - DESIGN/CONSTRUCTION OF VIA FERRATA |
DIN EN 12602:2015-12 (Draft) | PREFABRICATED REINFORCED COMPONENTS OF AUTOCLAVED AERATED CONCRETE |
CEN/TR 16949:2016 | Road restraint system - Pedestrian restraint system - Pedestrian parapets |
PREN 14389-2 : DRAFT 2013 | ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS |
UNI EN 15080-12 : 2011 | EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - PART 12: LOADBEARING MASONRY WALLS |
10/30218985 DC : DRAFT JUNE 2010 | BS EN 13369 - COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
BS EN 1999-1-2:2007 | Eurocode 9. Design of aluminium structures Structural fire design |
PREN 13107 : DRAFT 2013 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CIVIL ENGINEERING WORKS |
I.S. EN 15080-12:2011 | EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - PART 12: LOADBEARING MASONRY WALLS |
UNI CEN/TR 1317-6 : 2012 | ROAD RESTRAINT SYSTEMS - PART 6: PEDESTRIAN RESTRAINT SYSTEM - PEDESTRIAN PARAPETS |
I.S. EN 1993-4-2:2007 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 4-2: TANKS |
16/30336501 DC : 0 | BS EN 16951-2 - RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTIC CHARACTERISTICS |
I.S. EN 1176-1:2017 | PLAYGROUND EQUIPMENT AND SURFACING - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS |
ISO 16733-1:2015 | Fire safety engineering — Selection of design fire scenarios and design fires — Part 1: Selection of design fire scenarios |
UNI EN 15254-5 : 2009 | EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 5: METAL SANDWICH PANEL CONSTRUCTION |
PREN 752 : DRAFT 2015 | DRAIN AND SEWER SYSTEMS OUTSIDE BUILDINGS - SEWER SYSTEM MANAGEMENT |
UNE-EN 15080-12:2011 | Extended application of results from fire resistance tests - Part 12: Loadbearing masonry walls |
DIN EN 12871:2013-09 | Wood-based panels - Determination of performance characteristics for load bearing panels for use in floors, roofs and walls |
DIN EN 1995-1-2 E : 2010 | EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-2: GENERAL - STRUCTURAL FIRE DESIGN |
BS EN 12871:2013 | Wood-based panels. Determination of performance characteristics for load bearing panels for use in floors, roofs and walls |
BS EN 15567-1:2015 | Sports and recreational facilities. Ropes courses Construction and safety requirements |
BS EN 14389-1:2015 | Road traffic noise reducing devices. Procedures for assessing long term performance Acoustical characteristics |
BS EN 1473:2016 | Installation and equipment for liquefied natural gas. Design of onshore installations |
I.S. EN 14389-2:2015 | ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS |
DIN EN 1473:1997-11 | INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS |
I.S. EN 13451-1:2011 | SWIMMING POOL EQUIPMENT - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS |
DIN EN 12602:2016-12 | Prefabricated reinforced components of autoclaved aerated concrete |
I.S. EN 12871:2013 | WOOD-BASED PANELS - DETERMINATION OF PERFORMANCE CHARACTERISTICS FOR LOAD BEARING PANELS FOR USE IN FLOORS, ROOFS AND WALLS |
I.S. EN 1473:2016 | INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS |
I.S. EN 14389-1:2015 | ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTICAL CHARACTERISTICS |
09/30194124 DC : DRAFT MAY 2009 | BS EN 15254-7 - EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 7: NON-LOAD BEARING SANDWICH PANELS - CEILINGS |
11/30253904 DC : 0 | BS EN 12871 - WOOD-BASED PANELS - DETERMINATION OF PERFORMANCE CHARACTERISTICS FOR LOAD BEARING PANELS FOR USE IN FLOORS, ROOFS AND WALLS |
PREN 14389-1 : DRAFT 2013 | ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTICAL CHARACTERISTICS |
PREN 1473 : DRAFT 2018 | INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS |
BS EN 15254-2:2009 | Extended application of results from fire resistance tests. Nonloadbearing walls Masonry and gypsum blocks |
14/30299480 DC : 0 | BS EN 1176-1 - PLAYGROUND EQUIPMENT AND SURFACING - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS |
UNE-EN 1996-1-2:2011 | Eurocode 6 - Design of masonry structures - Part 1-2: General rules - Structural fire design |
BS EN 15254-5:2009 | Extended application of results from fire resistance tests. Non-loadbearing walls Metal sandwich panel construction |
DIN EN 1090-5 E : 2017 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR COLD-FORMED STRUCTURAL ALUMINIUM ELEMENTS AND COLD-FORMED STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS |
ISO/TS 16733:2006 | Fire safety engineering Selection of design fire scenarios and design fires |
17/30359807 DC : DRAFT SEP 2017 | BS ISO 24679-1 - FIRE SAFETY ENGINEERING - PERFORMANCE OF STRUCTURES IN FIRE - PART 1: GENERAL |
EN 1473:2016 | Installation and equipment for liquefied natural gas - Design of onshore installations |
13/30275585 DC : 0 | BS EN 13107 - SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CIVIL ENGINEERING WORKS |
PD ISO/TR 24679-3:2015 | Fire safety engineering. Performance of structure in fire Example of an open car park |
DIN EN 15080-12:2011-04 | Extended application of results from fire resistance tests - Part 12: Loadbearing masonry walls |
I.S. EN 15254-7:2012 | EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING CEILINGS - PART 7: METAL SANDWICH PANEL CONSTRUCTION |
PREN 15254-7 : DRAFT 2016 | EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING CEILINGS - PART 7: METAL SANDWICH PANEL CONSTRUCTION |
BS EN 12602:2016 | Prefabricated reinforced components of autoclaved aerated concrete |
UNI EN 15254-2 : 2009 | EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 2: MASONRY AND GYPSUM BLOCKS |
PREN 1090-4 : DRAFT 2014 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 4: TECHNICAL REQUIREMENTS FOR THIN-GAUGE, COLD-FORMED STEEL ELEMENTS AND STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS |
EN 1993-4-1:2007/A1:2017 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 4-1: SILOS |
I.S. EN 1993-4-1:2007 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 4-1: SILOS |
UNE-EN 12602:2011 | Prefabricated reinforced components of autoclaved aerated concrete |
EN 1176-1:2017 | Playground equipment and surfacing - Part 1: General safety requirements and test methods |
DIN EN 1991-1-6:2010-12 | EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-6: GENERAL ACTIONS, ACTIONS DURING EXECUTION |
EN 13451-1:2011+A1:2016 | Swimming pool equipment - Part 1: General safety requirements and test methods |
EEMUA 207 : 2009 | DOUBLE CONCRETE TANKS FOR LIQUEFIED GAS - GUIDE TO DESIGN, CONSTRUCTION AND OPERATION |
EN 1993-1-2:2005/AC:2009 | EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN |
UNI EN 1991-4 : 2006 | EUROCODE 1 - ACTIONS ON STRUCTURES - PART 4: SILOS AND TANKS |
UNI EN 1991-1-6 : 2005 | EUROCODE 1 - ACTIONS ON STRUCTURES - PART 1-6: GENERAL ACTIONS - ACTIONS DURING EXECUTION |
UNI EN 1995-1-2 : 2005 | EUROCODE 5 - DESIGN OF TIMBER STRUCTURES - PART 1-2: GENERAL - STRUCTURAL FIRE DESIGN |
UNI EN 1994-1-2 : 2014 | EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN |
UNI EN 1993-1-2 : 2005 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN |
UNI EN 1992-1-2 : 2005 | EUROCODE 2 - DESIGN OF CONCRETE STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN |
UNI EN 12871 : 2013 | WOOD-BASED PANELS - DETERMINATION OF PERFORMANCE CHARACTERISTICS FOR LOAD BEARING PANELS FOR USE IN FLOORS, ROOFS AND WALLS |
UNI EN 1996-1-2 : 2005 | EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN |
UNI EN 1993-6 : 2007 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 6: CRANE SUPPORTING STRUCTURES |
UNI EN 1999-1-2 : 2007 | EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-2: STRUCTURAL FIRE DESIGN |
16/30330690 DC : 0 | BS EN 15254-7 - EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING CEILINGS - PART 7: METAL SANDWICH PANEL CONSTRUCTION |
07/30172842 DC : 0 | BS EN 15080-12 - EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - PART 12: LOADBEARING MASONRY WALLS |
DIN EN 1993-4-2:2017-09 | EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 4-2: TANKS |
05/30134891 DC : 0 | EN 15254-2 - EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 2: MASONRY AND GYPSUM BLOCKS |
15/30325882 DC : 0 | BS EN 16932-1 - DRAIN AND SEWER SYSTEMS OUTSIDE BUILDINGS - PUMPING SYSTEMS - PART 1: GENERAL REQUIREMENTS |
UNE-EN 14389-1:2015 | Road traffic noise reducing devices - Procedures for assessing long term performance - Part 1: Acoustical characteristics |
I.S. EN 1999-1-2:2007 | EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-2: STRUCTURAL FIRE DESIGN (INCLUDING IRISH NATIONAL ANNEX) |
DIN EN 1992-1-2:2010-12 | Eurocode 2: Design of concrete structures - Part 1-2: General rules - Structural fire design (includes Corrigendum AC:2008) |
UNE-EN 1995-1-2:2016 | Eurocode 5: Design of timber structures - Part 1-2: General - Structural fire design. |
15/30326160 DC : 0 | BS EN 16951-1 - RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTIC CHARACTERISTICS |
ISO/TR 13571-2:2016 | Life-threatening components of fire Part 2: Methodology and examples of tenability assessment |
UNI EN 15254-7 : 2012 | EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING CEILINGS - PART 7: METAL SANDWICH PANEL CONSTRUCTION |
PREN 15254-5 : DRAFT 2016 | EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 5: METAL SANDWICH PANEL CONSTRUCTION |
EN 15254-7:2018 | Extended application of results from fire resistance tests - Non-loadbearing ceilings - Part 7: Metal sandwich panel construction |
I.S. EN 1992-1-2:2005 | EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN (INCLUDING IRISH NATIONAL ANNEX) |
DIN EN 1991-4:2010-12 | EUROCODE 1: ACTIONS ON STRUCTURES - PART 4: SILOS AND TANKS |
BS EN 1993-6:2007 | Eurocode 3. Design of steel structures Crane supporting structures |
BS EN 1992-1-2:2004 | Eurocode 2. Design of concrete structures General rules - Structural fire design |
UNE-EN 12871:2013 | Wood-based panels - Determination of performance characteristics for load bearing panels for use in floors, roofs and walls |
BS EN 14879-1:2005 | 0rganic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Terminology, design and preparation of substrate |
BS EN 14389-2:2015 | Road traffic noise reducing devices. Procedures for assessing long term performance Non-acoustical characteristics |
UNE-EN 14389-2:2015 | Road traffic noise reducing devices - Procedures for assessing long term performance - Part 2: Non-acoustical characteristics |
UNE-EN 1991-4:2011 | Eurocode 1 - Actions on structures - Part 4: Silos and tanks |
BS EN 1995-1-2:2004 | Eurocode 5. Design of timber structures General - Structural fire design |
BS EN 1991-4:2006 | Eurocode 1. Actions on structures Silos and tanks |
BS EN 14620-1:2006 | Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0°C and -165°C General |
BS EN 1994-1-2 : 2005 | EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN |
I.S. EN 15567-1:2015 | SPORTS AND RECREATIONAL FACILITIES - ROPES COURSES - PART 1: CONSTRUCTION AND SAFETY REQUIREMENTS |
BS EN 1991-1-6:2005 | Eurocode 1. Actions on structures General actions. Actions during execution |
EN 1992-1-2:2004/AC:2008 | EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN |
EN 14389-2:2015 | Road traffic noise reducing devices - Procedures for assessing long term performance - Part 2: Non-acoustical characteristics |
EN 15254-2:2009 | Extended application of results from fire resistance tests - Non-loadbearing walls - Part 2: Masonry and Gypsum Blocks |
EN 14620-1:2006 | Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 °C and -165 °C - Part 1: General |
EN 14389-1:2015 | Road traffic noise reducing devices - Procedures for assessing long term performance - Part 1: Acoustical characteristics |
EN 1991-1-6:2005/AC:2013 | Eurocode 1 - Actions on structures Part 1-6: General actions - Actions during execution |
EN 1995-1-2:2004/AC:2009 | EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-2: GENERAL - STRUCTURAL FIRE DESIGN |
EN 1999-1-2:2007/AC:2009 | EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-2: STRUCTURAL FIRE DESIGN |
EN 1993-6:2007/AC:2009 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 6: CRANE SUPPORTING STRUCTURES |
EN 1991-4:2006/AC:2012 | EUROCODE 1 - ACTIONS ON STRUCTURES - PART 4: SILOS AND TANKS |
EN 15080-12:2011 | Extended application of results from fire resistance tests - Part 12: Loadbearing masonry walls |
EN 14620-4:2006 | Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 °C and -165 °C - Part 4: Insulation components |
EN 1994-1-2:2005/A1:2014 | EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN |
EN 1996-1-2:2005/AC:2010 | EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN |
EN 14879-1:2005 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 1: Terminology, design and preparation of substrate |
DD ISO/TS 24679:2011 | Fire safety engineering. Performance of structures in fire |
BS EN 1993-4-1 : 2007 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 4-1: SILOS |
UNE-EN 1993-1-2:2016 | Eurocode 3: Design of steel structures - Part 1-2: General rules - Structural fire design |
DIN EN 15254-2 E : 2009 | EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 2: MASONRY AND GYPSUM BLOCKS |
BS EN 15080-12:2011 | Extended application of results from fire resistance tests Loadbearing masonry walls |
UNE-ISO 16733-1:2017 | Fire safety engineering.Selection of design fire scenarios and design fires.Part 1: Selection of design fire scenarios |
DIN EN 1993-4-1:2017-09 | EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 4-1: SILOS |
DIN EN 1999-1-2:2010-12 | Eurocode 9: Design of aluminium structures - Part 1-2: Structural fire design (includes Corrigendum AC:2009) |
14/30297213 DC : 0 | BS EN 1473 - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS |
KTA 3205.2 : 2015 COR 2016 | COMPONENT SUPPORT STRUCTURES WITH NON-INTEGRAL CONNECTIONS - PART 2: COMPONENT SUPPORT STRUCTURES WITH NON-INTEGRAL CONNECTIONS FOR PRESSURE AND ACTIVITY-RETAINING COMPONENTS IN SYSTEMS OUTSIDE THE PRIMARY CIRCUIT |
UNE-EN 1994-1-2:2016 | Eurocode 4 - Design of composite steel and concrete structures - Part 1-2: General rules - Structural fire design. |
BS EN 15254-7:2012 | Extended application of results from fire resistance tests. Non-loadbearing ceilings Metal sandwich panel construction |
UNE-EN 15254-2:2010 | Extended application of results from fire resistance tests - Non-loadbearing walls - Part 2: Masonry and Gypsum Blocks |
S.R. CEN/TR 16949:2016 | ROAD RESTRAINT SYSTEM - PEDESTRIAN RESTRAINT SYSTEM - PEDESTRIAN PARAPETS |
I.S. EN 15254-2:2009 | EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NONLOADBEARING WALLS - PART 2: MASONRY AND GYPSUM BLOCKS |
UNE-EN 1991-1-6:2018 | Eurocode 1 - Actions on structures Part 1-6: General actions - Actions during execution. |
I.S. EN 1090-5:2017 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR COLD-FORMED STRUCTURAL ALUMINIUM ELEMENTS AND COLD-FORMED STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS |
EN 15254-5:2018 | Extended application of results from fire resistance tests - Non-loadbearing walls - Part 5: Metal sandwich panel construction |
I.S. EN 15254-5:2009 | EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 5: METAL SANDWICH PANEL CONSTRUCTION |
I.S. EN 12602:2016 | PREFABRICATED REINFORCED COMPONENTS OF AUTOCLAVED AERATED CONCRETE |
DIN EN 1994-1-2:2010-12 | Eurocode 4: Design of composite steel and concrete structures - Part 1-2: General rules - Structural fire design (includes Corrigendum AC:2008) |
BS EN 1993-1-2:2005 | Eurocode 3. Design of steel structures General rules - Structural fire design |
BS EN 1996-1-2:2005 | Eurocode 6. Design of masonry structures General rules. Structural fire design |
EN 1090-5:2017 | Execution of steel structures and aluminium structures - Part 5: Technical requirements for cold-formed structural aluminium elements and cold-formed structures for roof, ceiling, floor and wall applications |
DIN EN 15567-1:2015-08 | SPORTS AND RECREATIONAL FACILITIES - ROPES COURSES - PART 1: CONSTRUCTION AND SAFETY REQUIREMENTS |
DIN EN 1995-1-2:2010-12 | Eurocode 5: Design of timber structures - Part 1-2: General - Structural fire design (includes Corrigendum AC:2009) |
UNE-EN 13451-1:2012 | Swimming pool equipment - Part 1: General safety requirements and test methods |
PREN 13501-2 : DRAFT 2015 | FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 2: CLASSIFICATION USING DATA FROM FIRE RESISTANCE TESTS, EXCLUDING VENTILATION SERVICES |
ISO 1716:2010 | Reaction to fire tests for products Determination of the gross heat of combustion (calorific value) |
EN 1991-1-1:2002/AC:2009 | EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-1: GENERAL ACTIONS - DENSITIES, SELF-WEIGHT, IMPOSED LOADS FOR BUILDINGS |
EN 1363-2:1999 | Fire resistance tests - Part 2: Alternative and additional procedures |
EN 1990:2002/A1:2005/AC:2010 | EUROCODE - BASIS OF STRUCTURAL DESIGN |
EN ISO 1716:2010 | Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO 1716:2010) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.