EN ISO 4628-2:2016
|
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering (ISO 4628-2:2016)
|
ISO 6272-2:2011
|
Paints and varnishes — Rapid-deformation (impact resistance) tests — Part 2: Falling-weight test, small-area indenter
|
ISO/IEC 17050-1:2004
|
Conformity assessment Supplier's declaration of conformity Part 1: General requirements
|
ISO 5168:2005
|
Measurement of fluid flow — Procedures for the evaluation of uncertainties
|
EN ISO 11664-4:2011
|
Colorimetry - Part 4: CIE 1976 L*a*b* Colour space (ISO 11664-4:2008)
|
ISO 6270-1:1998
|
Paints and varnishes Determination of resistance to humidity Part 1: Continuous condensation
|
ISO 11664-4:2008
|
Colorimetry Part 4: CIE 1976 L*a*b* Colour space
|
EN ISO 2409:2013
|
Paints and varnishes - Cross-cut test (ISO 2409:2013)
|
EN ISO 9227:2017
|
Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2017)
|
EN ISO 228-1:2003
|
Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000)
|
ISO 4628-3:2016
|
Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 3: Assessment of degree of rusting
|
EN ISO 4628-3:2016
|
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting (ISO 4628-3:2016)
|
EN 437:2003+A1:2009
|
Test gases - Test pressures - Appliance categories
|
EN ISO 1518-1:2011
|
Paints and varnishes - Determination of scratch resistance - Part 1: Constant-loading method (ISO 1518-1:2011)
|
ASTM D 1003 : 2013 : REDLINE
|
Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics
|
ISO 2812-1:2017
|
Paints and varnishes — Determination of resistance to liquids — Part 1: Immersion in liquids other than water
|
ISO 1518-1:2011
|
Paints and varnishes Determination of scratch resistance Part 1: Constant-loading method
|
ISO 9227:2017
|
Corrosion tests in artificial atmospheres — Salt spray tests
|
ISO 4892-2:2013
|
Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps
|
EN ISO 6272-2:2011
|
Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter (ISO 6272-2:2011)
|
ISO 7005-1:2011
|
Pipe flanges — Part 1: Steel flanges for industrial and general service piping systems
|
EN ISO/IEC 17050-1:2010
|
Conformity assessment - Supplier's declaration of conformity - Part 1: General requirements (ISO/IEC 17050-1:2004, corrected version 2007-06-15)
|
ISO 834-1:1999
|
Fire-resistance tests Elements of building construction Part 1: General requirements
|
EN 549:1994
|
Rubber materials for seals and diaphragms for gas appliances and gas equipment
|
ISO 2409:2013
|
Paints and varnishes Cross-cut test
|
EN ISO 4892-2:2013
|
Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2013)
|
ISO 228-1:2000
|
Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation
|
ISO 4628-2:2016
|
Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 2: Assessment of degree of blistering
|
EN 16314:2013
|
Gas meters - Additional functionalities
|
EN 60730-1:2016
|
Automatic electrical controls - Part 1: General requirements
|
IEC 60730-1:2013+AMD1:2015 CSV
|
Automatic electrical controls - Part 1: General requirements
|