ISO/TR 18196:2016
Current
The latest, up-to-date edition.
Nanotechnologies — Measurement technique matrix for the characterization of nano-objects
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
English, French
08-11-2016
ISO/TR 18196:2016 provides a matrix that guides users to commercially available techniques relevant to the measurements of common physiochemical parameters for nano-objects. Some techniques are also applicable to nanostructured materials.
DocumentType |
Technical Report
|
Pages |
54
|
PublisherName |
International Organization for Standardization
|
Status |
Current
|
Standards | Relationship |
NEN NPR ISO/TR 18196 : 2016 | Identical |
FD ISO/TR 18196 : 2017 FD | Identical |
SIS-ISO/TR 18196 : 2016 | Identical |
PD ISO/TR 18196:2016 | Identical |
ASTM E 3025 : 2016 | Standard Guide for Tiered Approach to Detection and Characterization of Silver Nanomaterials in Textiles |
ISO/TS 10797:2012 | Nanotechnologies Characterization of single-wall carbon nanotubes using transmission electron microscopy |
ISO/TS 13278:2011 | Nanotechnologies Determination of elemental impurities in samples of carbon nanotubes using inductively coupled plasma mass spectrometry |
ISO 16700:2016 | Microbeam analysis — Scanning electron microscopy — Guidelines for calibrating image magnification |
ISO 22412:2017 | Particle size analysis — Dynamic light scattering (DLS) |
ISO 13099-3:2014 | Colloidal systems Methods for zeta potential determination Part 3: Acoustic methods |
ISO 25498:2010 | Microbeam analysis Analytical electron microscopy Selected-area electron diffraction analysis using a transmission electron microscope |
ISO 13320:2009 | Particle size analysis Laser diffraction methods |
ISO 13318-2:2007 | Determination of particle size distribution by centrifugal liquid sedimentation methods Part 2: Photocentrifuge method |
ISO/TS 10868:2017 | Nanotechnologies — Characterization of single-wall carbon nanotubes using ultraviolet-visible-near infrared (UV-Vis-NIR) absorption spectroscopy |
ISO 13318-1:2001 | Determination of particle size distribution by centrifugal liquid sedimentation methods Part 1: General principles and guidelines |
ISO/TS 14101:2012 | Surface characterization of gold nanoparticles for nanomaterial specific toxicity screening: FT-IR method |
ASTM E 2530 : 2006 | Standard Practice for Calibrating the Z-Magnification of an Atomic Force Microscope at Subnanometer Displacement Levels Using Si(111) Monatomic Steps (Withdrawn 2015) |
ISO 18118:2015 | Surface chemical analysis — Auger electron spectroscopy and X-ray photoelectron spectroscopy — Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials |
ISO/TS 80004-6:2013 | Nanotechnologies Vocabulary Part 6: Nano-object characterization |
ISO 13099-1:2012 | Colloidal systems — Methods for zeta-potential determination — Part 1: Electroacoustic and electrokinetic phenomena |
ISO 22493:2014 | Microbeam analysis Scanning electron microscopy Vocabulary |
ISO 15472:2010 | Surface chemical analysis X-ray photoelectron spectrometers Calibration of energy scales |
ISO 29301:2010 | Microbeam analysis Analytical transmission electron microscopy Methods for calibrating image magnification by using reference materials having periodic structures |
ISO 18115-1:2013 | Surface chemical analysis — Vocabulary — Part 1: General terms and terms used in spectroscopy |
ISO 15202-3:2004 | Workplace air Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry Part 3: Analysis |
ISO/TR 13014:2012 | Nanotechnologies Guidance on physico-chemical characterization of engineered nanoscale materials for toxicologic assessment |
ISO 26824:2013 | Particle characterization of particulate systems — Vocabulary |
ISO 11357-5:2013 | Plastics — Differential scanning calorimetry (DSC) — Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion |
ASTM B 922 : 2017 : REDLINE | Standard Test Method for Metal Powder Specific Surface Area by Physical Adsorption |
ISO/TR 13097:2013 | Guidelines for the characterization of dispersion stability |
ISO/TS 17466:2015 | Use of UV-Vis absorption spectroscopy in the characterization of cadmium chalcogenide colloidal quantum dots |
ISO 21270:2004 | Surface chemical analysis X-ray photoelectron and Auger electron spectrometers Linearity of intensity scale |
ISO 11039:2012 | Surface chemical analysis — Scanning-probe microscopy — Measurement of drift rate |
ISO 11357-3:2011 | Plastics Differential scanning calorimetry (DSC) Part 3: Determination of temperature and enthalpy of melting and crystallization |
ISO 11357-2:2013 | Plastics Differential scanning calorimetry (DSC) Part 2: Determination of glass transition temperature and glass transition step height |
ISO 11357-4:2014 | Plastics Differential scanning calorimetry (DSC) Part 4: Determination of specific heat capacity |
ISO 13321:1996 | Particle size analysis Photon correlation spectroscopy |
ISO/IEC Guide 99:2007 | International vocabulary of metrology Basic and general concepts and associated terms (VIM) |
ISO 20998-2:2013 | Measurement and characterization of particles by acoustic methods — Part 2: Guidelines for linear theory |
ISO 3252:1999 | Powder metallurgy Vocabulary |
ISO 13067:2011 | Microbeam analysis Electron backscatter diffraction Measurement of average grain size |
ISO 15901-2:2006 | Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption Part 2: Analysis of mesopores and macropores by gas adsorption |
ASTM E 984 : 2012 : REDLINE | Standard Guide for Identifying Chemical Effects and Matrix Effects in Auger Electron Spectroscopy |
ISO/TS 19590:2017 | Nanotechnologies Size distribution and concentration of inorganic nanoparticles in aqueous media via single particle inductively coupled plasma mass spectrometry |
ISO 16531:2013 | Surface chemical analysis Depth profiling Methods for ion beam alignment and the associated measurement of current or current density for depth profiling in AES and XPS |
ISO 472:2013 | Plastics Vocabulary |
ISO 15470:2017 | Surface chemical analysis — X-ray photoelectron spectroscopy — Description of selected instrumental performance parameters |
ISO/TS 11888:2017 | Nanotechnologies — Characterization of multiwall carbon nanotubes — Mesoscopic shape factors |
ISO 18516:2006 | Surface chemical analysis Auger electron spectroscopy and X-ray photoelectron spectroscopy Determination of lateral resolution |
ASTM E 1217 : 2011 : REDLINE | Standard Practice for Determination of the Specimen Area Contributing to the Detected Signal in Auger Electron Spectrometers and Some X-Ray Photoelectron Spectrometers |
ISO/TR 19319:2013 | Surface chemical analysis Fundamental approaches to determination of lateral resolution and sharpness in beam-based methods |
ISO 18757:2003 | Fine ceramics (advanced ceramics, advanced technical ceramics) Determination of specific surface area of ceramic powders by gas adsorption using the BET method |
ISO 14644-1:2015 | Cleanrooms and associated controlled environments Part 1: Classification of air cleanliness by particle concentration |
ISO 19318:2004 | Surface chemical analysis X-ray photoelectron spectroscopy Reporting of methods used for charge control and charge correction |
ISO/TS 80004-1:2015 | Nanotechnologies — Vocabulary — Part 1: Core terms |
ISO 11357-6:2008 | Plastics Differential scanning calorimetry (DSC) Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) |
ISO 20998-1:2006 | Measurement and characterization of particles by acoustic methods Part 1: Concepts and procedures in ultrasonic attenuation spectroscopy |
ISO 17751:2007 | Textiles Quantitative analysis of animal fibres by microscopy Cashmere, wool, speciality fibres and their blends |
ISO 24237:2005 | Surface chemical analysis — X-ray photoelectron spectroscopy — Repeatability and constancy of intensity scale |
ISO/TR 14187:2011 | Surface chemical analysis Characterization of nanostructured materials |
ASTM C 1274 : 2012 : REDLINE | Standard Test Method for Advanced Ceramic Specific Surface Area by Physical Adsorption |
ISO 18115-2:2013 | Surface chemical analysis Vocabulary Part 2: Terms used in scanning-probe microscopy |
ISO/TS 11308:2011 | Nanotechnologies Characterization of single-wall carbon nanotubes using thermogravimetric analysis |
ISO 13318-3:2004 | Determination of particle size distribution by centrifugal liquid sedimentation methods Part 3: Centrifugal X-ray method |
ISO 24173:2009 | Microbeam analysis — Guidelines for orientation measurement using electron backscatter diffraction |
ISO 17867:2015 | Particle size analysis Small-angle X-ray scattering |
ISO/TR 18392:2005 | Surface chemical analysis X-ray photoelectron spectroscopy Procedures for determining backgrounds |
ISO/TS 80004-4:2011 | Nanotechnologies — Vocabulary — Part 4: Nanostructured materials |
ISO 11357-1:2016 | Plastics — Differential scanning calorimetry (DSC) — Part 1: General principles |
ISO/TS 10798:2011 | Nanotechnologies — Charaterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis |
ISO 22309:2011 | Microbeam analysis — Quantitative analysis using energy-dispersive spectrometry (EDS) for elements with an atomic number of 11 (Na) or above |
ISO 9277:2010 | Determination of the specific surface area of solids by gas adsorption — BET method |
ISO 9276-6:2008 | Representation of results of particle size analysis — Part 6: Descriptive and quantitative representation of particle shape and morphology |
ISO 15901-1:2016 | Evaluation of pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption Part 1: Mercury porosimetry |
ISO 27891:2015 | Aerosol particle number concentration — Calibration of condensation particle counters |
ISO 13099-2:2012 | Colloidal systems — Methods for zeta-potential determination — Part 2: Optical methods |
ISO 11357-7:2015 | Plastics Differential scanning calorimetry (DSC) Part 7: Determination of crystallization kinetics |
ISO 15632:2012 | Microbeam analysis Selected instrumental performance parameters for the specification and checking of energy-dispersive X-ray spectrometers for use in electron probe microanalysis |
ISO 9276-2:2014 | Representation of results of particle size analysis Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions |
ISO 15900:2009 | Determination of particle size distribution Differential electrical mobility analysis for aerosol particles |
ISO 20903:2011 | Surface chemical analysis Auger electron spectroscopy and X-ray photoelectron spectroscopy Methods used to determine peak intensities and information required when reporting results |
ISO/TS 80004-2:2015 | Nanotechnologies — Vocabulary — Part 2: Nano-objects |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.