BS 6423:1983
|
Code of practice for maintenance of electrical switchgear and controlgear for voltages up to and including 1 kV
|
BS EN 457:1992
|
Safety of machinery. Auditory danger signals. General requirements, design and testing
|
BS EN 60947-5-3:2013
|
Low-voltage switchgear and controlgear Control circuit devices and switching elements. Requirements for proximity devices with defined behaviour under fault conditions (PDDB)
|
BS EN 60204-32:2008
|
Safety of machinery. Electrical equipment of machines Requirements for hoisting machines
|
BS EN 811:1997
|
Safety of machinery. Safety distances to prevent danger zones being reached by the lower limbs
|
BS EN 294:1992
|
Safety of machinery. Safety distances to prevent danger zones being reached by the upper limbs
|
BS EN ISO 12100-2 : 2003
|
SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
|
BS EN 1299 : 1997
|
MECHANICAL VIBRATION AND SHOCK - VIBRATION ISOLATION OF MACHINES - INFORMATION FOR THE APPLICATION OF SOURCE ISOLATION
|
PD CLC/TR 50404:2003
|
Electrostatics. Code of practice for the avoidance of hazards due to static electricity
|
BS EN 981 : 1997
|
SAFETY OF MACHINERY - SYSTEM OF AUDITORY AND VISUAL DANGER AND INFORMATION SIGNALS
|
BS EN 1837 : 1999
|
SAFETY OF MACHINERY - INTEGRAL LIGHTING OF MACHINES
|
BS EN ISO 10472-5:2008
|
Safety requirements for industrial laundry machinery Flatwork ironers, feeders and folders
|
BS 4211(2005) : 2005
|
SPECIFICATION FOR PERMANENTLY FIXED LADDERS
|
BS EN ISO 10472-4:2008
|
Safety requirements for industrial laundry machinery Air dryers
|
BS EN ISO 12543-2:2011
|
Glass in building. Laminated glass and laminated safety glass Laminated safety glass
|
BS EN 1760-2 : 2001
|
SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE EDGES AND PRESSURE SENSITIVE BARS
|
BS EN 415-4:1998
|
Safety of packaging machines Palletizers and depalletizers
|
BS EN 60947-5-5:1998
|
Low-voltage switchgear and controlgear Control circuit devices and switching elements. Electrical emergency stop devices with mechanical latching function
|
BS EN ISO 12543-3:2011
|
Glass in building. Laminated glass and laminated safety glass Laminated glass
|
BS EN 60204-1 : 2006
|
SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
|
BS EN 418:1992
|
Safety of machinery. Emergency stop equipment, functional aspects. Principles for design
|
BS EN 954-1:1997
|
Safety of machinery. Safety related parts of control systems General principles for design
|
BS EN 62061 : 2005
|
SAFETY OF MACHINERY - FUNCTIONAL SAFETY OF SAFETY-RELATED ELECTRICAL, ELECTRONIC AND PROGRAMMABLE ELECTRONIC CONTROL SYSTEMS
|
BS EN ISO 10472-2:2008
|
Safety requirements for industrial laundry machinery Washing machines and washer-extractors
|
BS EN ISO 12543-4:2011
|
Glass in building. Laminated glass and laminated safety glass Test methods for durability
|
BS EN 983 : 1996
|
SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - PNEUMATICS
|
ISO 14118:2000
|
Safety of machinery Prevention of unexpected start-up
|
ISO 13851:2002
|
Safety of machinery Two-hand control devices Functional aspects and design principles
|
BS EN 574 : 1997
|
SAFETY OF MACHINERY - TWO-HAND CONTROL DEVICES - FUNCTIONAL ASPECTS - PRINCIPLES FOR DESIGN
|
EN 81-1:1998+A3:2009
|
Safety rules for the construction and installation of lifts - Part 1: Electric lifts
|
BS EN 61496-1:2013
|
Safety of machinery. Electro-sensitive protective equipment General requirements and tests
|
BS EN 50205:2002
|
Relays with forcibly guided (mechanically linked) contacts
|
BS EN 61810-1:2015
|
Electromechanical elementary relays General and safety requirements
|
BS EN ISO 14163:1998
|
Acoustics. Guidelines for noise control by silencers
|
BS EN ISO 10472-6:2008
|
Safety requirements for industrial laundry machinery Ironing and fusing presses
|
BS 5395-3:1985
|
Stairs, ladders and walkways Code of practice for the design of industrial type stairs, permanent ladders and walkways
|
BS EN 1760-1 : 1998
|
SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE MATS AND PRESSURE SENSITIVE FLOORS
|
BS EN 349 : 1993
|
SAFETY OF MACHINERY - MINIMUM GAPS TO AVOID CRUSHING OF PARTS OF THE HUMAN BODY
|
BS 5499-5:2002
|
Graphical symbols and signs. Safety signs, including fire safety signs Signs with specific safety meanings
|
BS EN 61310-2:2008
|
Safety of machinery. Indication, marking and actuation Requirements for marking
|
BS EN 61800-5-1:2007
|
Adjustable speed electrical power drive systems Safety requirements. Electrical, thermal and energy
|
BS EN ISO 10472-3:2008
|
Safety requirements for industrial laundry machinery Washing tunnel lines including component machines
|
BS EN ISO 12543-5:2011
|
Glass in building. Laminated glass and laminated safety glass Dimensions and edge finishing
|
ISO 13853:1998
|
Safety of machinery Safety distances to prevent danger zones being reached by the lower limbs
|
BS EN ISO 10472-1:2008
|
Safety requirements for industrial laundry machinery Common requirements
|
BS 7671(2001) : 2001 AMD 14905
|
REQUIREMENTS FOR ELECTRICAL INSTALLATIONS
|
BS EN ISO 11546-2:2009
|
Acoustics. Determination of sound insulation performances of enclosures Measurements in situ (for acceptance and verification purposes)
|
BS 6753:1986
|
Specification for shotbolts (solenoid operated) for guarding machinery
|
BS EN 1417:2014
|
Plastics and rubber machines. Two-roll mills. Safety requirements
|
BS EN ISO 5674:2009
|
Tractors and machinery for agriculture and forestry. Guards for power take-off (PTO) drive-shafts. Strength and wear tests and acceptance criteria
|
BS IEC 61496-2:1997
|
Safety of machinery. Electro-sensitive protective equipment Particular requirements for equipment using active opto-electronic protective devices (AOPDs)
|
BS EN ISO 12100-1 : 2003
|
SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY
|
BS EN ISO 15667:2000
|
Acoustics. Guidelines for noise control by enclosures and cabins
|
BS EN 1037 : 1996
|
SAFETY OF MACHINERY - PREVENTION OF UNEXPECTED START-UP
|
BS EN 1550 : 1997
|
MACHINE-TOOLS SAFETY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF WORK HOLDING CHUCKS
|
ISO 14121:1999
|
Safety of machinery Principles of risk assessment
|
BS EN 60947-5-1 : 2004
|
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-1: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTROMECHANICAL CONTROL CIRCUIT DEVICES
|
BS EN 982 : 1996
|
SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - HYDRAULICS
|
BS 7228-6:1992
|
Industrial robots Recommendations for safety
|
BS EN 61310-1:2008
|
Safety of machinery. Indication, marking and actuation Requirements for visual, acoustic and tactile signals
|
BS EN 60947-4-2:2012
|
Low-voltage switchgear and controlgear Contactors and motor-starters. AC semiconductor motor controllers and starters
|
DD CLC/TS 62046:2008
|
Safety of machinery. Application of protective equipment to detect the presence of persons
|
BS EN 12013 : 2000
|
PLASTICS AND RUBBER MACHINES - INTERNAL MIXERS - SAFETY REQUIREMENTS
|
BS EN ISO 12543-1:2011
|
Glass in building. Laminated glass and laminated safety glass Definitions and description of component parts
|
ISO 13854:2017
|
Safety of machinery — Minimum gaps to avoid crushing of parts of the human body
|
BS EN 1672-2 : 2005
|
FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 2: HYGIENE REQUIREMENTS
|
PD CR 954-100:1999
|
Safety of machinery. Safety-related parts of control systems Guide on the use and application of EN 954-1:1996
|
BS EN 1050:1997
|
Safety of machinery. Principles for risk assessment
|
BS EN 60947-4-1 : 2010
|
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-1: CONTACTORS AND MOTOR-STARTERS - ELECTROMECHANICAL CONTACTORS AND MOTOR-STARTERS
|
ISO 13850:2015
|
Safety of machinery Emergency stop function Principles for design
|
BS EN 61496-3:2001
|
Safety of machinery. Electro-sensitive protective equipment Particular requirements for active opto-electronic protective devices responsive to diffuse reflection (AOPDDR)
|
BS EN 60204-11 : 2001
|
SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 11: REQUIREMENTS FOR HV EQUIPMENT FOR VOLTAGES ABOVE 1000 V A.C. OR 1500 V D.C. AND NOT EXCEEDING 36 KV
|
BS EN ISO 13849-2:2012
|
Safety of machinery. Safety-related parts of control systems Validation
|
1998/37/EC : 1998
|
DIRECTIVE 98/37/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 22 JUNE 1998 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO MACHINERY
|
BS EN 999 : 1999
|
SAFETY OF MACHINERY - THE POSITIONING OF PROTECTIVE EQUIPMENT IN RESPECT OF APPROACH SPEEDS OF PARTS OF THE HUMAN BODY
|
EN 775:1992/AC:1993
|
MANIPULATING INDUSTRIAL ROBOTS - SAFETY
|
BS EN 953 : 1998
|
SAFETY OF MACHINERY - GUARDS - GENERAL REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF FIXED AND MOVABLE GUARDS
|
BS EN 61310-3:2008
|
Safety of machinery. Indication, marking and actuation Requirements for the location and operation of actuators
|
IEC 61800-5-2:2016
|
Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional
|
BS 5760-5:1991
|
Reliability of systems, equipment and components Guide to failure modes, effects and criticality analysis (FMEA and FMECA)
|
BS EN 1088 : 1995
|
SAFETY OF MACHINERY - INTERLOCKING DEVICES ASSOCIATED WITH GUARDS - PRINCIPLES FOR DESIGN AND SELECTION
|
BS EN ISO 12543-6:2011
|
Glass in building. Laminated glass and laminated safety glass Appearance
|