Name: UNI EN 14985 : 2012
Brand: UNI

CRANES - SLEWING JIB CRANES

Published date

15-03-2012

Publisher

Ente Nazionale Italiano di Unificazione (UNI)

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 List of hazards
5 Safety requirements and/or protective measures
6 Verification of the safety requirements and/or
  protective measures
7 Information for use
8 Information to be obtained from the purchaser
Annex A (informative) - Guidance for classification
        according to EN 13001-1
Annex B (normative) - Load combinations
Annex C (informative) - Calculation of stall load
        factor for indirect acting lifting force limiter
Annex D (normative) - Noise test code for slewing jib cranes
Annex ZA (informative) - Relationship between this European
         Standard and the Essential Requirements of
         EU Directive 2006/42/EC
Bibliography

Pertains to electrically or hydraulically powered slewing jib cranes mounted in one position or free to travel on horizontal rails.

DocumentType	Standard
ProductNote	Italian version is available for this standard
PublisherName	Ente Nazionale Italiano di Unificazione (UNI)
Status	Current
Supersedes	UNI EN 14985 : 2007

Standards	Relationship
EN 14985:2012	Identical
NEN EN 14985 : 2012	Identical
I.S. EN 14985:2012	Identical
NBN EN 14985 : 2012	Identical
DIN EN 14985:2012-05	Identical
NF EN 14985 : 2012	Identical
BS EN 14985:2012	Identical
SN EN 14985 : 2012	Identical
NS EN 14985 : 2012	Identical
DIN EN 14985 E : 2012	Identical

ISO 11202:2010	Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections
ISO 10245-4:2004	Cranes — Limiting and indicating devices — Part 4: Jib cranes
EN ISO 11204:2010	Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections (ISO 11204:2010)
CEN/TS 13001-3-1:2004/AC:2006	CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF OF COMPETENCE OF STEEL STRUCTURES
EN 13557:2003+A2:2008	Cranes - Controls and control stations
ISO 4871:1996	Acoustics — Declaration and verification of noise emission values of machinery and equipment
EN 547-2:1996+A1:2008	Safety of machinery - Human body measurements - Part 2: Principles for determining the dimensions required for access openings
EN 13155:2003+A2:2009	Cranes - Safety - Non-fixed load lifting attachments
EN 60825-1:2014/AC:2017-06	SAFETY OF LASER PRODUCTS - PART 1: EQUIPMENT CLASSIFICATION AND REQUIREMENTS (IEC 60825-1:2014)
EN 12644-2:2000+A1:2008	Cranes - Information for use and testing - Part 2: Marking
ISO 7752-4:1989	Cranes Controls Layout and characteristics Part 4: Jib cranes
ISO/TR 11688-1:1995	Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning
EN 894-2:1997+A1:2008	Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 2: Displays
EN ISO 6892-1:2016	Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016)
EN ISO 1680:2013	Acoustics - Test code for the measurement of airborne noise emitted by rotating electrical machines (ISO 1680:2013)
ISO 6336-2:2006	Calculation of load capacity of spur and helical gears Part 2: Calculation of surface durability (pitting)
ISO 9374-4:1989	Cranes Information to be provided Part 4: Jib cranes
ISO 13732-1:2006	Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces
EN 13135-2:2004+A1:2010	Cranes - Equipment - Part 2: Non-electrotechnical equipment
EN 547-1:1996+A1:2008	Safety of machinery - Human body measurements - Part 1: Principles for determining the dimensions required for openings for whole body access into machinery
ISO 6892-1:2016	Metallic materials Tensile testing Part 1: Method of test at room temperature
IEC 60204-11:2000	Safety of machinery - Electrical equipment of machines - Part 11: Requirements for HV equipment for voltages above 1 000 V a.c. or 1 500 V d.c. and not exceeding 36 kV
IEC 60825-1:2014	Safety of laser products - Part 1: Equipment classification and requirements
IEC 60204-32:2008	Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines
EN 13586:2004+A1:2008	Cranes - Access
EN 614-1:2006+A1:2009	Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles
EN ISO 13857:2008	Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008)
EN ISO 11688-2 : 2000	ACOUSTICS - RECOMMENDED PRACTICE FOR THE DESIGN OF LOW-NOISE MACHINERY AND EQUIPMENT - PART 2: INTRODUCTION TO THE PHYSICS OF LOW-NOISE DESIGN
ISO 1680:2013	Acoustics — Test code for the measurement of airborne noise emitted by rotating electrical machines
EN 12644-1:2001+A1:2008	Cranes - Information for use and testing - Part 1: Instructions
ISO 12100:2010	Safety of machinery — General principles for design — Risk assessment and risk reduction
ISO 9374-1:1989	Cranes Information to be provided Part 1: General
EN ISO 13732-1:2008	Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006)
EN 60204-32:2008	Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines
EN ISO 11201:2010	Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010)
EN 13001-2:2014	Crane safety - General design - Part 2: Load actions
ISO 12488-4:2004	Cranes Tolerances for wheels and travel and traversing tracks Part 4: Jib cranes
EN 13135-1:2003+A1:2010	Cranes - Equipment - Part 1: Electrotechnical equipment
ISO 4309:2010	Cranes Wire ropes Care and maintenance, inspection and discard
EN 61000-6-2:2005/corrigendum:2005	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY FOR INDUSTRIAL ENVIRONMENTS (IEC 61000-6-2:2005)
EN 13001-1:2015	Cranes - General design - Part 1: General principles and requirements
EN ISO 3744:2010	Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010)
EN 953:1997+A1:2009	Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards
ISO 13857:2008	Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs
ISO 6336-1:2006	Calculation of load capacity of spur and helical gears Part 1: Basic principles, introduction and general influence factors
ISO 11203:1995	Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level
EN ISO 12100:2010	Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010)
EN 60204-11:2000/corrigendum:2010	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 11: REQUIREMENTS FOR HV EQUIPMENT FOR VOLTAGES ABOVE 1000 V A.C. OR 1500 V D.C. AND NOT EXCEEDING 36 KV
EN ISO 13849-1:2015	Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015)
EN ISO 4871:2009	Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996)
ISO 8566-4:1998	Cranes Cabins Part 4: Jib cranes
EN ISO 11688-1:2009	Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995)
ISO 13849-1:2015	Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design
ISO/TR 11688-2:1998	Acoustics Recommended practice for the design of low-noise machinery and equipment Part 2: Introduction to the physics of low-noise design
IEC 61000-6-2 : 3.0:2016	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY STANDARD FOR INDUSTRIAL ENVIRONMENTS
EN ISO 11202:2010	Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010)
EN ISO 11203:2009	Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995)
ISO 11201:2010	Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections
ISO 11204:2010	Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections
CEN/TS 13001-3-2:2008	Cranes - General design - Part 3-2: Limit states and proof of competence of wire ropes in reeving systems
EN 894-1:1997+A1:2008	Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 1: General principles for human interactions with displays and control actuators