• There are no items in your cart

AS 1444-2007

Current
Current

The latest, up-to-date edition.

Wrought alloy steels - Standard, hardenability (H) series and hardened and tempered to designated mechanical properties (Reconfirmed 2017)
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Published date

10-26-2007

Preview

Specifies requirements for wrought alloy steels intended for general engineering purposes and is applicable to hot-rolled or cold-finished bars for machines, booms, billets and slabs for forgings, and forgings.

This Standard specifies requirements for wrought alloy steels intended for general engineering purposes and is applicable to hot-rolled or cold-finished bars for machining, blooms, billets and slabs for forgings, and forgings, as follows:(a) To specified chemical composition only (standard steel series).(b) To specified chemical composition and end-quench hardenability requirements (H series).(c) To specified chemical composition and mechanical properties achieved by hardening and tempering.This Standard does not apply to stainless steels.NOTES:1 Advice and recommendations on information to be supplied by the purchaser at the time of enquiry or order are contained in Appendix A.2 Alternative means for determining compliance with this Standard are given in Appendix B.

Committee
MT-001
DocumentType
Standard
ISBN
0 7337 8406 2
Pages
58
ProductNote
Reconfirmed 07/07/2017.This standard has been reconfirmed in Australia in 2017 and remains current in New Zealand. Reconfirmation Notice 07/07/2017
PublisherName
Standards Australia
Status
Current
Supersedes

First published as AS G18-1966.AS G19 first published 1966.AS G20 first published 1966.AS G19-1966 and AS G20-1966 revised, amalgmated and redesignated AS 1444-1974.Second edition 1981.AS G18-1966 revised and redesignated AS 2506-1981.Third edition AS 1444-1986.Second edition AS 2506-1990.AS 1444-1986 and AS 2506-1990 revised, amalgamated and designated AS 1444-1996.Fifth edition 2007.Reconfirmed 2017. Originated as part of AS G18-1996, AS G19-1966 and AS G20-1966. Previous edition AS 1444-1996. Fifth edition 2007. Reissued incorporating Amendment No. 1 (February 2008).

AS 1815.1-2007 Metallic materials - Rockwell hardness test Test method (scales A, B, C, D, E, F, G, H, K, N, T) (Reconfirmed 2017)
AS/NZS ISO 9001:2000 Quality management systems - Requirements
AS 1733-1976 Methods for the determination of grain size in metals (Reconfirmed 2018)
AS 1443-2004 Carbon and carbon-manganese steel - Cold finished bars (Reconfirmed 2022)
AS 1817.1-2003 Metallic materials - Vickers hardness test Test method (ISO 6507-1:1997, MOD)
AS 1544.1-2003 Methods for impact tests on metals Izod
HB 18.28-2005 Conformity assessment - Guidance on a third-party certification system for products
AS 1391-2007 Metallic materials - Tensile testing at ambient temperature
AS/RISSB 7515 : 2014 Railway Rolling Stock - Axles
AS 2706-2003 Numerical values - Rounding and interpretation of limiting values (Reconfirmed 2018)
AS/NZS 1050.14:1994 Methods for the analysis of iron and steel Determination of manganese in iron and steel - Titrimetric method
AS 1544.2-2003 Method for impact tests on metals Charpy V-notch (Reconfirmed 2017)
AS 1199.0-2003 Sampling procedures for inspection by attributes Introduction to the ISO 2859 attribute sampling system (Reconfirmed 2016)
AS 1654.2-1995 ISO system of limits and fits - Tables of standard tolerance grades and limit deviations for holes and shafts
AS 1770-2003 Steel - Hardenability test by end quench (Jominy test)
AS/NZS 1050.1:1996 Methods for the analysis of iron and steel Sampling iron and steel for chemical analysis
AS/NZS 1050.16:1994 Methods for the analysis of iron and steel Determination of sulfur content - Infrared absorption method after combustion in an induction furnace (Reconfirmed 2017)
AS 5016-2004 Metallic materials - Conversion of hardness values
AS 1199.1-2003 Sampling procedures for inspection by attributes Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (Reconfirmed 2016)
AS 1816.1-2007 Metallic materials - Brinell hardness test Test method (ISO 6506-1:2005, MOD) (Reconfirmed 2017)
AS/NZS ISO 9004:2000 Quality management systems - Guidelines for performance improvements
AS/NZS 1050.18:1994 Methods for the analysis of iron and steel Determination of phosphorus - Spectrophotometric method (Reconfirmed 2016)
AS 2338-2004 Preferred dimensions of wrought metal products

AS 3797.1-1991 Hand hammers - General requirements
AS 2427-2004 Smoke/heat release vents
AS/NZS 1576.1:2010 Scaffolding General requirements
AS 3585-2008 End fittings for synthetic flat-webbing and round slings (Reconfirmed 2019)
AS/NZS 1576.2:2016 Scaffolding Couplers and accessories
AS 3777-1990 Shank hooks and large-eye hooks - Maximum 25 t
AS 2336-1992 Meat industry - Hand-held knives
AS/NZS 1577:2013 Scaffold decking components
AS 2938-1993 Gears - Spur and helical - Guide to specification and rating
AS 2319-2001 Rigging screws and turnbuckles
AS 2321-2006 Short-link chain for lifting purposes
AS 3527.3-1990 Hand-operated screwdrivers and screwdriver bits - Bits for manually driven and power-driven screwdrivers
AS 2947.3-1995 Insulators - Porcelain and glass for overhead power lines - Voltages greater than 1000 V a.c. Couplings
AS 1138-1992 Thimbles for wire rope
AS/NZS 2243.8:2014 Safety in laboratories Fume cupboards
AS 2089-1993 Sheave blocks for lifting purposes
AS 1682.1-1990 Fire dampers Specification
AS/NZS 4287:1995 Child carrier seats for pedal bicycles - Safety requirements
AS/NZS 2243.8:2006 Safety in laboratories - Fume cupboards
AS/NZS 1576.2:2009 Scaffolding Couplers and accessories
AS 1154.1-2009 Insulator and conductor fittings for overhead power lines Performance, material, general requirements and dimensions (Reconfirmed 2019)
AS 3751-2005 Underground mining - Slope haulage - Couplings, drawbars, and safety chains
AS 3776-2006 Lifting components for Grade T chain slings
AS 2887-1993 Plastic waste fittings
AS 1577-1993 Scaffold planks
AS 4115-1993 Hand torque tools
AS 4285:2019 Rooflights
AS 2385-1990 Single-use (sterile) infusion sets for general medical use
AS 3527.1-1988 Hand-operated screwdrivers and screwdriver bits - Screwdrivers for slotted and cross-recessed fasteners
AS/NZS 1576.3:1995 Scaffolding Prefabricated and tube-and-coupler scaffolding
AS 2528-1982 Bolts, studbolts and nuts for flanges and other high and low temperature applications
AS 1154.1-2004 Insulator and conductor fittings for overhead power lines - Performance, material, general requirements and dimensions
AS 2317-1998 Collared eyebolts
AS 1576.4-1991 Scaffolding - Suspended scaffolding
AS 1576.4-1991 Scaffolding - Suspended scaffolding
AS 3777-2008 Shank hooks and large eye hooks - Maximum 60 t (Reconfirmed 2019)
AS/NZS 1577:2018 Scaffold decking components
AS 2318-2006 Swivels for lifting applications (Reconfirmed 2022)
AS/NZS 1576.5:1995 Scaffolding Prefabricated splitheads and trestles
AS 2145-2002 Stainless steel needle tubing for manufacture of medical devices
AS 1138-2008 Thimbles for wire rope (Reconfirmed 2019)
AS 3526-1988 Hexagon wrench keys and wrench bits for high-strength fasteners
AS/NZS 1576.4:2013 Scaffolding Suspended scaffolding
AS 1753-1990 Webbing for restraining devices for occupants of motor vehicles
AS 3585-1990 End fittings for flat-webbing slings
AS 2321:2014 Short-link chain for lifting purposes
AS/NZS 2785:2000 Suspended ceilings - Design and installation
AS 4285-2007 Skylights
AS 1576.2-1991 Scaffolding Couplers and accessories
AS 2741-2002 Shackles

View more information
US$118.31
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.