AS 2650-2005
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Common specifications for high-voltage switchgear and controlgear standards (IEC 60694 Ed.2.2(2002) MOD)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
06-24-2021
English
05-27-2005
Specifies requirements common to most high-voltage a.c. switchgear and controlgear equipment Standards. It is intended to be used as a base document in conjunction with those equipment Standards that make extensive reference to its clauses. Its requirements become effective as specified in or as modified by those Standards.
Committee |
EL-007
|
DocumentType |
Standard
|
ISBN |
0 7337 6608 0
|
Pages |
103
|
PublisherName |
Standards Australia
|
Status |
Superseded
|
SupersededBy | |
Supersedes | |
UnderRevision |
First published as AS 2650-1983.Second edition 1986.Jointly revised and designated AS/NZS 2650:2000.Dejointed and revised as AS2650-2005. Originated as AS 2650-1983. Previous edition 1986. Jointly revised and designated AS/NZS 2650:2000. Dejointed and revised as AS 2650-2005.
AS 60068.2.61-2003 | Environmental testing Tests - Test Z/ABDM: Climate sequence |
AS 60068.2.69-2004 | Environmental testing Tests - Test Te: Soldering - Solderability testing of electronic components for surface mount technology by the wetting balance method |
AS 60068.2.30-2003 | Environmental testing Tests - Test Db and guidance: Damp heat, cyclic (12 + 12-hour cycle) |
AS/NZS 3947.2:2002 | Low-voltage switchgear and controlgear Circuit-breakers |
AS 1852.826-1983 | International electrotechnical vocabulary - Electrical installations of buildings |
AS 60270-2001 | High-voltage test techniques - Partial discharge measurements |
AS 60068.2.58-2004 | Environmental testing Tests - Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD) |
AS 60947.5.1-2004 | Low-voltage switchgear and controlgear Control circuit devices and switching elements - Electromechanical control circuit devices |
AS 60068.2.78-2003 | Environmental testing Tests - Test Cab: Damp heat, steady state (Reconfirmed 2018) |
AS 60068.2.48-2003 | Environmental testing Tests - Guidance on the application of the tests of AS 60068 to simulate the effects of storage |
AS 1359.101-1997 | Rotating electrical machines - General requirements - Rating and performance |
AS 1852.441-1985 | International electrotechnical vocabulary - Switchgear, controlgear and fuses |
AS 60068.2.41-2003 | Environmental testing Tests - Test Z/BM: Combined dry heat/low air pressure tests |
AS 60269.1-2005 | Low-voltage fuses - General requirements |
AS 60068.2.45-2003 | Environmental testing Tests - Test XA and guidance: Immersion in cleaning solvents |
AS 60068.2.21-2004 | Environmental testing Tests - Test U: Robustness of terminations and integral mounting devices |
AS 60947.7.2-2004 | Low-voltage switchgear and controlgear Ancillary equipment - Protective conductor terminal blocks for copper conductors |
AS 60068.2.27-2003 | Environmental testing Tests - Test Ea and guidance: Shock |
AS 60947.4.1-2004 | Low-voltage switchgear and controlgear Contactors and motor-starters - Electromechanical contactors and motor-starters |
AS 60068.2.33-2003 | Environmental testing Tests - Guidance on change of temperature tests |
AS 60068.2.40-2003 | Environmental testing Tests - Test Z/AM: Combined cold/low air pressure tests |
AS 60068.2.1-2003 | Environmental testing Tests - Test A: Cold (Reconfirmed 2018) |
AS 60068.2.70-2003 | Environmental testing Tests - Test Xb: Abrasion of markings and letterings caused by rubbing of fingers and hands |
AS 1852.301-1988 | International electrotechnical vocabulary General terms on measurements in electricity |
AS 1931.1-1996 | High-voltage test techniques - General definitions and test requirements |
AS 60947.4.2-2004 | Low-voltage switchgear and controlgear Contactors and motor-starters - A.C. semiconductor motor controllers and starters |
AS 60068.2.32-2003 | Environmental testing Tests - Test Ed: Free fall |
AS 60417.2.3-2004 | Graphical symbols for use on equipment Telephone and telecommunications |
AS 60947.7.1-2004 | Low-voltage switchgear and controlgear Ancillary equipment - Terminal blocks for copper conductors |
AS 60068.2.57-2003 | Environmental testing Tests - Test Ff: Vibration - Time-history method |
AS 60068.2.5-2003 | Environmental testing Tests - Test Sa: Simulated solar radiation at ground level |
AS 60068.2.52-2003 | Environmental testing Tests - Test Kb: Salt mist, cyclic (sodium chloride solution) |
AS 60068.2.29-2003 | Environmental testing Tests - Test Eb and guidance: Bump |
AS 60068.2.67-2003 | Environmental testing Tests - Test Cy: Damp heat, steady state accelerated test primarily intended for components |
AS 4436-1996 | Guide for the selection of insulators in respect of polluted conditions |
AS 60417.2.4-2004 | Graphical symbols for use on equipment Maritime navigation |
AS 60417.2.1-2004 | Graphical symbols for use on equipment General application |
AS 60068.2.50-2003 | Environmental testing Tests - Test Z/Afc: Combined cold/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens |
AS 60068.2.6-2003 | Environmental testing Tests - Test Fc: Vibration (sinusoidal) (Reconfirmed 2018) |
AS 60068.2.11-2003 | Environmental testing Tests - Test Ka: Salt mist |
AS 1852.151-1988 | International electrotechnical vocabulary - Electric and magnetic devices |
AS 60269.2.1-2005 | Low-voltage fuses Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Sections I to VI: Examples of types of standardized fuses |
AS 60068.2.59-2003 | Environmental testing Tests - Test Fe: Vibration - Sine beat method |
AS 60068.2.9-2003 | Environmental testing Tests - Guidance for solar radiation testing |
AS 60068.2.55-2003 | Environmental testing Tests - Test Ee and guidance: Bounce |
AS 60068.2.51-2003 | Environmental testing Tests - Test Z/BFc: Combined dry heat/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens |
AS 60068.2.39-2003 | Environmental testing Tests - Test Z/AMD: Combined sequential cold, low air pressure and damp heat test |
AS 60068.2.53-2003 | Environmental testing Tests - Guidance to tests Z/AFc and Z/BFc: Combined temperature (cold and dry heat) and vibration (sinusoidal) tests |
AS 60068.2.31-2003 | Environmental testing Tests - Test Ec: Drop and topple, primarily for equipment-type specimens |
AS 1824.1-1995 | Insulation co-ordination Definitions, principles and rules |
AS/NZS 60227.5:2003 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V Flexible cables (cords) |
AS 60068.2.68-2003 | Environmental testing Tests - Test L: Dust and sand |
AS 3726.2-1989 | Electromechanical components for electronic equipment - Basic testing procedures and measuring methods General examination, electrical continuity and contact resistance tests, insulation tests and voltage stress tests |
AS 60068.2.66-2003 | Environmental testing Tests - Test Cx: Damp heat, steady state (unsaturated pressurized vapour) |
AS 60068.2.64-2003 | Environmental testing Tests - Test Fh: Vibration, broad-band random (digital control) and guidance |
AS 60068.2.77-2004 | Environmental testing Tests - Test 77: Body strength and impact shock |
AS 60068.2.81-2004 | Environmental testing Tests - Test Ei: Shock - Shock response spectrum synthesis |
AS 60068.2.10-2003 | Environmental testing Tests - Test J and guidance: Mould growth |
AS 1852.581-1979 | International electrotechnical vocabulary - Electromechanical components for electronic equipment |
AS 1852.604-1988 | International electrotechnical vocabulary Generation, transmission and distribution of electricity - Operation |
AS 60068.2.54-2004 | Environmental testing Tests - Test Ta: Soldering - Solderability testing by the wetting balance method |
AS 1852.131-1988 | International electrotechnical vocabulary - Electric and magnetic circuits |
AS/NZS CISPR 11:2004 | Industrial scientific and medical (ISM) radio-frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement |
AS 4362.1-1996 | High-voltage test techniques for low-voltage equipment Definitions, test and procedure requirements |
AS 2791-1996 | High-voltage switchgear and controlgear - Use and handling of sulphur hexafluoride (SF6) in high-voltage switchgear and controlgear |
AS 60269.2.0-2005 | Low-voltage fuses Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Sections I to VI: examples of types of standardized fuses |
AS 60068.2.60-2003 | Environmental testing Tests - Test Ke: Flowing mixed gas corrosion test |
AS 1852.446-1988 | International electrotechnical vocabulary - Electrical relays |
AS 60068.2.46-2004 | Environmental testing Tests - Guidance to test Kd: Hydrogen sulphide test for contacts and connections |
AS 60068.2.49-2004 | Environmental testing Tests - Guidance to Test Kc: Sulphur dioxide test for contacts and connections |
AS/NZS 61000.4.1:1999 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Overview of immunity tests |
AS 60068.2.20-2004 | Environmental testing Tests - Test T: Soldering |
AS 60068.2.74-2003 | Environmental testing Tests - Test Xc: Fluid contamination |
AS 60068.2.75-2003 | Environmental testing Tests - Test Eh: Hammer tests |
AS 60529-2004 | Degrees of protection provided by enclosures (IP Code) (Reconfirmed 2018) |
AS 60068.2.43-2004 | Environmental testing Tests - Test Kd: Hydrogen sulphide test for contacts and connections |
AS/NZS 60245.4:2003 | Rubber insulated cables - Rated voltage up to and including 450/750 V Cords and flexible cables |
AS 60068.2.2-2003 | Environmental testing Tests - Test B: Dry heat (Reconfirmed 2018) |
AS 60068.2.38-2003 | Environmental testing Tests - Test Z/AD: Composite temperature/humidity cyclic test |
AS/NZS 3947.3:2001 | Low-voltage switchgear and controlgear Switches, disconnectors, switch-disconnectors and fuse-combination units |
AS 60068.2.65-2003 | Environmental testing Tests - Test Fg: Vibration, acoustically induced |
AS 60417.1-2004 | Graphical symbols for use on equipment - Overview and application |
AS 60068.2.18-2003 | Environmental testing Tests - Test R and guidance: Water |
AS 2325-1993 | Tungsten filament lamps for general service - Performance requirements |
AS 60068.2.47-2003 | Environmental testing Tests - Mounting of compounds, equipment and other articles for vibration, impact and similar dynamic tests |
AS 60417.2.2-2004 | Graphical symbols for use on equipment Audiovisual equipment |
AS/NZS 61000.4.1:2006 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Overview of IEC 61000-4 series |
AS 60417.2.7-2004 | Graphical symbols for use on equipment Safety aspects |
AS 60417.2.6-2004 | Graphical symbols for use on equipment Medical equipment |
AS 60068.2.7-2003 | Environmental testing Tests - Test Ga and guidance: Acceleration, steady state |
AS 60417.2.5-2004 | Graphical symbols for use on equipment Home electric appliances |
AS 60068.2.17-2003 | Environmental testing Tests - Test Q: Sealing |
AS 60068.2.14-2003 | Environmental testing Tests - Test N: Change of temperature |
AS 60068.2.13-2003 | Environmental testing Tests - Test M: Low air pressure |
AS 60068.2.44-2004 | Environmental testing Tests - Guidance on test T: Soldering |
AS 60068.2.42-2004 | Environmental testing Tests - Test Kc: Sulphur dioxide test for contacts and connections (Reconfirmed 2018) |
AS 61850.3-2005 | Communication networks and systems in substations - General requirements |
AS 62271.100-2005 | High-voltage switchgear and controlgear High-voltage alternating current circuit-breakers (IEC 62271-100, Ed. 1.1 (2003) MOD) |
AS 2264-1995 | A.C. insulation-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 38 kV |
AS/NZS 7000:2016 | Overhead line design |
AS 1307.2-1996 | Surge arresters Metal-oxide surge arresters without gaps for a.c. systems (Reconfirmed 2015) |
AS/NZS 60137:2008 | Insulated bushings for alternating voltages above 1000 V (IEC 60137, Ed. 5.0 (2003) MOD) |
AS 4243-1994 | Additional requirements for enclosed switchgear and controlgear from 1 kV to 72.5 kV to be use in severe climatic conditions |
AS 62271.200-2005 | High-voltage switchgear and controlgear A.C. metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV (IEC 62271-200, Ed. 1 (2003) MOD) |
AS 2067-1984 | Switchgear assemblies and ancillary equipment for alternating voltages above 1 kV |
AS 62271.100-2008 | High-voltage switchgear and controlgear High-voltage alternating-current circuit-breakers (IEC 62271-100, Ed. 1.2 (2006) MOD) |
AS 62271.201-2008 | High-voltage switchgear and controlgear AC insulation-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV |
AS 2067-2008 | Substations and high voltage installations exceeding 1 kV a.c. |
AS 1033.2-1988 | High voltage fuses (For rated voltages exceeding 1000 V) Current-limiting (Powder-filled) type (Reconfirmed 2018) |
AS 2024-1991 | High voltage a.c. switchgear and controlgear - Switch-fuse combinations |
AS 1033.1-1990 | High voltage fuses (for rated voltages exceeding 1000 V) Expulsion type (Reconfirmed 2018) |
AS 62271.202-2008 | High-voltage switchgear and controlgear High-voltage/low-voltage prefabricated substation |
AS/NZS 7000:2010 | Overhead line design - Detailed procedures |
AS 61330-2005 | High-voltage/low-voltage prefabricated substations |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.