• There are no items in your cart

ASTM D 1505 : 1998 : EDT 1

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Test Method for Density of Plastics by the Density-Gradient Technique
Available format(s)

Hardcopy , PDF

Superseded date

11-11-2014

Language(s)

English

Published date

03-10-1998

1.1 This test method covers the determination of the density of solid plastics.

1.2 This test method is based on observing the level to which a test specimen sinks in a liquid column exhibiting a density gradient, in comparison with standards of known density.

Note 1—The comparable ISO method is R1183-1987.

1.3 The values stated in SI units are to be regarded as the standard.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Committee
D 20
DocumentType
Test Method
Pages
7
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

ASTM D 3350 : 2014 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
ASTM D 4321 : 2015 Standard Test Method for Package Yield of Plastic Film (Withdrawn 2024)
ASTM D 2839 : 2016 Standard Practice for Use of a Melt Index Strand for Determining Density of Polyethylene
ASTM D 3171 : 2015 Standard Test Methods for Constituent Content of Composite Materials
ASTM D 7791 : 2017 Standard Test Method for Uniaxial Fatigue Properties of Plastics
ASTM F 2848 : 2017 Standard Specification for Medical-Grade Ultra-High Molecular Weight Polyethylene Yarns
ASTM F 2718 : 2009 : R2015 Standard Specification for Polyethylene (PE) and Cement Materials for an Encapsulated Cement Mortar Formed in Place Liner System (FIPLS) for the Rehabilitation of Water Pipelines (Withdrawn 2022)
ASTM D 7774 : 2017 Standard Test Method for Flexural Fatigue Properties of Plastics
ASTM D 2734 : 2016 Standard Test Methods for Void Content of Reinforced Plastics
ASTM D 5747/D5747M : 2008 : R2013 : EDT 1 Standard Practice for Tests to Evaluate the Chemical Resistance of Geomembranes to Liquids
ASTM F 2818 : 2010 : R2014 : EDT 1 Standard Specification for Specification for Crosslinked Polyethylene (PEX) Material Gas Pressure Pipe and Tubing
ASTM D 3124 : 1998 : R2011 Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry
ASTM D 4000 : 2016 Standard Classification System for Specifying Plastic Materials
ASTM D 1593 : 2013 Standard Specification for Nonrigid Vinyl Chloride Plastic Film and Sheeting
ASTM D 7082 : 2015 Standard Specification for Polyethylene Stay In Place Form System for End Walls for Drainage Pipe
ASTM D 7273/D7273M : 2008 : R2013 : EDT 1 Standard Guide for for Acceptance Testing Requirements for Geonets and Geonet Drainage Geocomposites
ASTM F 561 : 2019 Standard Practice for Retrieval and Analysis of Medical Devices, and Associated Tissues and Fluids
ASTM D 5514/D5514M : 2018 Standard Test Method for Large-Scale Hydrostatic Puncture Testing of Geosynthetics
ASTM F 755 : 1999 : R2011 Standard Specification for Selection of Porous Polyethylene for Use in Surgical Implants
ASTM D 4762 : 2018 Standard Guide for Testing Polymer Matrix Composite Materials
ASTM F 3123 : 2018 : REV A Standard Specification for Metric Outside Diameter Polyethylene (PE) Plastic Pipe (DR-PN)
ASTM D 8136 : 2017 Standard Test Method for Determining Plastic Film Thickness and Thickness Variability Using a Non-Contact Capacitance Thickness Gauge
ASTM F 2160 : 2016 Standard Specification for Solid Wall High Density Polyethylene (HDPE) Conduit Based on Controlled Outside Diameter (OD)
ASTM D 4397 : 2016 Standard Specification for Polyethylene Sheeting for Construction, Industrial, and Agricultural Applications
ASTM F 639 : 2009 : R2015 Standard Specification for Polyethylene Plastics for Medical Applications
ASTM D 5576 : 2000 : R2013 Standard Practice for Determination of Structural Features in Polyolefins and Polyolefin Copolymers by Infrared Spectrophotometry (FT-IR)
ASTM D 4649 : 2003 : R2016 Standard Guide for Selection and Use of Stretch Wrap Films
ASTM F 648 : 2014 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Powder and Fabricated Form for Surgical Implants
ASTM D 6248 : 1998 : R2012 : EDT 1 Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry (Withdrawn 2021)
ASTM F 2389 : 2017 : REV A Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems
ASTM F 1960 : 2018 : REV A Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing
ASTM F 2820 : 2012 Standard Specification for Polyetherketoneketone (PEKK) Polymers for Surgical Implant Applications
ASTM D 1185 : 1998 : REV A : R2017 Standard Test Methods for Pallets and Related Structures Employed in Materials Handling and Shipping
ASTM D 1248 : 2016 Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable
ASTM D 4801 : 2008 : R2016 Standard Specification for Polyethylene Sheeting in Thickness of 0.25 mm (0.010 in.) and Greater
ASTM D 3800 : 2016 Standard Test Method for Density of High-Modulus Fibers
ASTM F 2881/F2881M : 2019 Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications
ASTM F 2025 : 2006 : R2018 Standard Practice for Gravimetric Measurement of Polymeric Components for Wear Assessment
ASTM F 2788/F2788M : 2019 Standard Specification for Metric and Inch-sized Crosslinked Polyethylene (PEX) Pipe
ASTM F 2313 : 2018 Standard Specification for Poly(glycolide) and Poly(glycolide-co-lactide) Resins for Surgical Implants with Mole Fractions Greater Than or Equal to 70 % Glycolide
ASTM F 2854 : 2010 : R2016 Standard Specification for Push-Fit Crosslinked Polyethylene (PEX) Mechanical Fittings for Crosslinked Polyethylene (PEX) Tubing
ASTM D 6495/D6495M : 2018 Standard Guide for Acceptance Testing Requirements for Geosynthetic Clay Liners
ASTM D 3981 : 2009 : REV A : R2016 Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications
ASTM F 2579 : 2018 Standard Specification for Amorphous Poly(lactide) and Poly(lactide-co-glycolide) Resins for Surgical Implants
ASTM F 2968/F2968M : 2014 : REV A Standard Specification for Black Crosslinked Polyethylene (PEX) Pipe, Fittings and Joints For Gas Distribution Applications
ASTM D 5889/D5889M : 2018 Standard Practice for Quality Control of Geosynthetic Clay Liners
ASTM D 3664 : 2016 Standard Specification for Biaxially Oriented Polymeric Resin Film for Capacitors in Electrical Equipment (Withdrawn 2022)
ASTM F 2026 : 2017 Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications
ASTM E 252 : 2006 : R2013 Standard Test Method for Thickness of Foil, Thin Sheet, and Film by Mass Measurement
ASTM D 4635 : 2016 Standard Specification for Plastic Films Made from Low-Density Polyethylene and Linear Low-Density Polyethylene for General Use and Packaging Applications
ASTM F 1545 : 2015 : REV A Standard Specification for Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges
ASTM D 2103 : 2015 Standard Specification for Polyethylene Film and Sheeting
ASTM F 1986 : 2001 : R2011 Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-Water Systems (Withdrawn 2020)
ASTM D 4976 : 2012 : REV A Standard Specification for Polyethylene Plastics Molding and Extrusion Materials
ASTM D 5047 : 2017 Standard Specification for Polyethylene Terephthalate Film and Sheeting
ASTM F 2929 : 2017 Standard Specification for Crosslinked Polyethylene (PEX) Tubing of 0.070 in. Wall and Fittings for Radiant Heating Systems up to 75 psig
ASTM D 2238 : 1992 : R2012 : EDT 1 Standard Test Methods for Absorbance of Polyethylene Due to Methyl Groups at 1378 cm<sup>−1</sup> (Withdrawn 2021)
ASTM F 1987 : 2001 : R2011 Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hydronic Heating Systems (Withdrawn 2020)
ASTM F 2905/F2905M : 2013 Standard Specification for Black Crosslinked Polyethylene (PEX) Line Pipe, Fittings and Joints For Oil and Gas Producing Applications
ASTM F 1925 : 2017 Standard Specification for Semi-Crystalline Poly(lactide) Polymer and Copolymer Resins for Surgical Implants
ASTM F 3219 : 2019 Standard Specification for 3 to 30 in. (75 To 750 mm) Polypropylene (PP) Corrugated Single Wall Pipe and Fittings
ASTM D 2684/D2684M : 2015 Standard Test Method for Permeability of Thermoplastic Containers to Packaged Reagents or Proprietary Products (Withdrawn 2024)
ASTM F 412 : 2019 Standard Terminology Relating to Plastic Piping Systems
ASTM D 6645 : 2018 Standard Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry
ASTM D 5577 : 2019 Standard Guide for Techniques to Separate and Identify Contaminants in Recycled Plastics
ASTM F 2805 : 2016 Standard Specification for Multilayer Thermoplastic And Flexible Steel Pipe And Connections
ASTM D 4883 : 2018 Standard Test Method for Density of Polyethylene by the Ultrasound Technique
ASTM D 1895 : 2017 Standard Test Methods for Apparent Density, Bulk Factor, and Pourability of Plastic Materials
ASTM F 2764/F2764M : 2019 Standard Specification for 6 to 60 in. [150 to 1500 mm] Polypropylene (PP) Corrugated Double and Triple Wall Pipe and Fittings for Non-Pressure Sanitary Sewer Applications
ASTM D 3485 : 2015 Standard Specification for Coilable High Density Polyethylene (HDPE) Cable in Conduit (CIC)

View more information
US$75.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.