• There are no items in your cart

EN 1652:1997/AC:2003

Current
Current

The latest, up-to-date edition.

COPPER AND COPPER ALLOYS - PLATE, SHEET, STRIP AND CIRCLES FOR GENERAL PURPOSES
Amendment of

EN 1652:1997

Published date

12-17-2003

Foreword
1 Scope
2 Normative references
3 Definitions
   3.1 plate
   3.2 sheet
   3.3 strip
   3.4 circle
4 Designations
   4.1 Material
   4.2 Material condition
   4.3 Product
5 Ordering information
6 Requirements
   6.1 Composition
   6.2 Mechanical properties
   6.3 Grain size
   6.4 Dimensions and tolerances
   6.5 Edgewise curvature c
   6.6 Surface condition
7 Sampling
   7.1 General
   7.2 Analysis
   7.3 Tensile, hardness, grain size and technological
       tests
8 Test methods
   8.1 Analysis
   8.2 Tensile test
   8.3 Hardness test
   8.4 Estimation of average grain size
   8.5 Technological tests
   8.6 Retests
   8.7 Rounding of results
9 Declaration of conformity and inspection of documentation
   9.1 Declaration of conformity
   9.2 Inspection of documentation
10 Marking, packaging, labelling
Table 1 Composition of copper
Table 2 Composition of copper alloys
Table 3 Mechanical properties
Table 4 Tolerances on thickness of hot rolled products
         (plate, sheet, strip and circles)
Table 5 Tolerances on thickness of cold rolled products
         (sheet, strip and circles)
Table 6 Tolerances on width of cold rolled strip
Table 7 Tolerances on width of plate and sheet
Table 8 Tolerances on length of plate, sheet and strip
         cut to length for lengths up to 5000 mm
Table 9 Squareness of cut plate and sheet
Table 10 Tolerances on diameter for circles
Table 11 Edgewise curvature
Annex A (informative) Bibliography

Defines the composition, property requirements and tolerances on dimensions and form for copper and copper alloy plate, sheet, strip and circles for general use.

Committee
TC 133
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current

14/30301257 DC : 0 BS EN 13160-3 - LEAK DETECTION SYSTEMS - PART 3: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR LIQUID SYSTEMS FOR TANKS
UNE-EN 50180-2:2015 Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers - Part 2: Requirement for bushing components
02/124462 DC : DRAFT DEC 2002 BS EN 285 - STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS
I.S. EN 1252-1:1998 CRYOGENIC VESSELS - MATERIALS - PART 1: TOUGHNESS REQUIREMENTS FOR TEMPERATURES BELOW -80 DEGREE C
BS EN 12693:2008 Refrigerating systems and heat pumps. Safety and environmental requirements. Positive displacement refrigerant compressors
07/30168082 DC : 0 BS EN 1173 - COPPER AND COPPER ALLOYS - MATERIAL CONDITION DESIGNATION
DD CEN/TS 13388:2008 Copper and copper alloys. Compendium of compositions and products
I.S. CEN ISO TR 20172:2006 WELDING - GROUPING SYSTEMS FOR MATERIALS - EUROPEAN MATERIALS
I.S. EN ISO 9226:2012 CORROSION OF METALS AND ALLOYS - CORROSIVITY OF ATMOSPHERES - DETERMINATION OF CORROSION RATE OF STANDARD SPECIMENS FOR THE EVALUATION OF CORROSIVITY (ISO 9226:2012)
BS EN 13611:2015 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels. General requirements
DIN SPEC 9700 E : 2013 COPPER AND COPPER ALLOYS - COMPENDIUM OF COMPOSITIONS AND PRODUCTS
PD CEN/TS 13388:2015 Copper and copper alloys. Compendium of compositions and products
BS EN 12861:1999 Copper and copper alloys. Scrap
PD CEN/TR 14585-3:2017 Corrugated metal hose assemblies for pressure applications Design method
17/30360051 DC : 0 BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
BS EN ISO 4126-2:2003 Safety devices for protection against excessive pressure Bursting disc safety devices
DIN EN 13599:2014-12 COPPER AND COPPER ALLOYS - COPPER PLATE, SHEET AND STRIP FOR ELECTRICAL PURPOSES
UNE-EN ISO 10380:2013 Pipework - Corrugated metal hoses and hose assemblies (ISO 10380:2012)
BS EN 1252-1:1998 Cryogenic vessels. Materials Toughness requirements for temperatures below -80°C
I.S. EN 13148:2010 COPPER AND COPPER ALLOYS - HOT-DIP TINNED STRIP
EN ISO 21028-1:2016 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 1: Temperatures below -80 °C (ISO 21028-1:2016)
EN 1092-3:2003/AC:2007 FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 3: COPPER ALLOY FLANGES
EN 1173:2008 Copper and copper alloys - Material condition designation
EN 1252-1:1998/AC:1998 CRYOGENIC VESSELS - MATERIALS - PART 1: TOUGHNESS REQUIREMENTS FOR TEMPERATURES BELOW -80 DEGREE C
CEN/TR 17144:2017 Resistance of metallic materials to liquid biogenic and alternative fuels and their blends
EN 13160-3:2016 Leak detection systems - Part 3: Requirements and test/assessment methods for liquid systems for tanks
I.S. EN 12284:2003 REFRIGERATING SYSTEMS AND HEAT PUMPS - VALVES - REQUIREMENTS, TESTING AND MARKING
EN 12693:2008 Refrigerating systems and heat pumps - Safety and environmental requirements - Positive displacement refrigerant compressors
EN 50180-2:2015 Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers - Part 2: Requirement for bushing components
EN ISO 9226:2012 Corrosion of metals and alloys - Corrosivity of atmospheres - Determination of corrosion rate of standard specimens for the evaluation of corrosivity (ISO 9226:2012)
DIN CEN/TS 13388;DIN SPEC 9700:2013-05 COPPER AND COPPER ALLOYS - COMPENDIUM OF COMPOSITIONS AND PRODUCTS
BS EN ISO 9226:2012 Corrosion of metals and alloys. Corrosivity of atmospheres. Determination of corrosion rate of standard specimens for the evaluation of corrosivity
BS EN 50180-2:2015 Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers Requirement for bushing components
I.S. EN 50180-2:2015 BUSHINGS ABOVE 1 KV UP TO 52 KV AND FROM 250 A TO 3,15 KA FOR LIQUID FILLED TRANSFORMERS - PART 2: REQUIREMENT FOR BUSHING COMPONENTS
PREN 14986 : DRAFT 2014 DESIGN OF FANS WORKING IN POTENTIALLY EXPLOSIVE ATMOSPHERES
ONORM EN ISO 4126-2 : 2006 SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 2: BURSTING DISC SAFETY DEVICES
S.R. CEN/TS 13388:2015 COPPER AND COPPER ALLOYS - COMPENDIUM OF COMPOSITIONS AND PRODUCTS
ISO 9940:2015 Aerospace series Fluid, hydraulic, phosphate ester-base, fire resistant Technical specification
EN ISO 4126-2:2003/AC:2006 SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 2: BURSTING DISC SAFETY DEVICES
DIN EN 12284:2004-01 Refrigerating systems and heat pumps - Valves - Requirements, testing and marking
BS EN ISO 10380:2012 Pipework. Corrugated metal hoses and hose assemblies
UNE-EN ISO 4404-1:2012 Petroleum and related products - Determination of the corrosion resistance of fire-resistant hydraulic fluids - Part 1: Water-containing fluids (ISO 4404-1:2012)
ISO 4404-1:2012 Petroleum and related products — Determination of the corrosion resistance of fire-resistant hydraulic fluids — Part 1: Water-containing fluids
BS EN 13148:2010 Copper and copper alloys. Hot-dip tinned strip
BS EN 1462:2004 Brackets for eaves gutters. Requirements and testing
I.S. EN ISO 10380:2012 PIPEWORK - CORRUGATED METAL HOSES AND HOSE ASSEMBLIES (ISO 10380:2012)
I.S. EN 1462:2004 BRACKETS FOR EAVES GUTTERS - REQUIREMENTS AND TESTING
I.S. EN 1092-3:2003 FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 3: COPPER ALLOY FLANGES
DIN EN 13148:2010-12 Copper and copper alloys - Hot-dip tinned strip
I.S. EN ISO 4404-1:2012 PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE CORROSION RESISTANCE OF FIRE-RESISTANT HYDRAULIC FLUIDS - PART 1: WATER-CONTAINING FLUIDS (ISO 4404-1:2012)
DIN EN 1173:2008-08 Copper and copper alloys - Material condition designation
DIN EN 13611:2019-06 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements
I.S. EN 13160-3:2016 LEAK DETECTION SYSTEMS - PART 3: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR LIQUID SYSTEMS FOR TANKS
I.S. EN 13599:2014 COPPER AND COPPER ALLOYS - COPPER PLATE, SHEET AND STRIP FOR ELECTRICAL PURPOSES
S.R. CEN/TR 17144:2017 RESISTANCE OF METALLIC MATERIALS TO LIQUID BIOGENIC AND ALTERNATIVE FUELS AND THEIR BLENDS
I.S. EN 1173:2008 COPPER AND COPPER ALLOYS - MATERIAL CONDITION DESIGNATION
I.S. EN 14986:2017 DESIGN OF FANS WORKING IN POTENTIALLY EXPLOSIVE ATMOSPHERES
12/30234431 DC : 0 BS ISO 9940 - AEROSPACE - FIRE RESISTANT HYDRAULIC FLUIDS
BS ISO 9940:2015 Aerospace series. Fluid, hydraulic, phosphate ester-base, fire resistant. Technical specification
UNI EN 12693 : 2008 REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS
14/30302298 DC : 0 BS ISO 9940 - AEROSPACE SERIES - FLUID, HYDRAULIC, PHOSPHATE ESTER-BASE, FIRE RESISTANT - TECHNICAL SPECIFICATION
02/710460 DC : DRAFT AUG 2002 ISO/DIS 21028-1 - CRYOGENIC VESSELS - TOUGHNESS REQUIREMENTS FOR MATERIALS AT CRYOGENIC TEMPERATURE - PART 1: TEMPERATURES BELOW -80 DEGREES C
12/30257022 DC : 0 BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - GENERAL REQUIREMENTS
CEN ISO/TR 20172:2009 Welding - Grouping systems for materials - European materials (ISO/TR 20172:2009)
17/30347443 DC : DRAFT JUN 2017 BS EN 12480 - GAS METERS - ROTARY DISPLACEMENT GAS METERS
14/30294092 DC : 0 BS EN 14986 - DESIGN OF FANS WORKING IN POTENTIALLY EXPLOSIVE ATMOSPHERES
PD CEN ISO/TR 20172:2009 Welding. Grouping systems for materials. European materials
UNI EN ISO 9226 : 2012 CORROSION OF METALS AND ALLOYS - CORROSIVITY OF ATMOSPHERES - DETERMINATION OF CORROSION RATE OF STANDARD SPECIMENS FOR THE EVALUATION OF CORROSIVITY
PD 6641:1999 Copper and copper alloys. Compendium of compositions and products
I.S. EN ISO 4126-2:2003 SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 2: BURSTING DISC SAFETY DEVICES
DIN EN 1462:2004-12 Brackets for eaves gutters - Requirements and testing
DIN EN 14436 E : 2004 COPPER AND COPPER ALLOYS - ELECTROLYTICALLY TINNED STRIP
BS EN 14436:2004 Copper and copper alloys. Electrolytically tinned strip
DIN EN ISO 4404-1:2012-10 PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE CORROSION RESISTANCE OF FIRE-RESISTANT HYDRAULIC FLUIDS - PART 1: WATER-CONTAINING FLUIDS (ISO 4404-1:2012)
DIN EN ISO 4404-1 E : 2012 PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE CORROSION RESISTANCE OF FIRE-RESISTANT HYDRAULIC FLUIDS - PART 1: WATER-CONTAINING FLUIDS (ISO 4404-1:2012)
UNI EN 13599 : 2014 COPPER AND COPPER ALLOYS - COPPER PLATE, SHEET AND STRIP FOR ELECTRICAL PURPOSES
UNI EN 1106 : 2010 MANUALLY OPERATED TAPS FOR GAS BURNING APPLIANCES
UNI EN ISO 10380 : 2012 PIPEWORK - CORRUGATED METAL HOSES AND HOSE ASSEMBLIES
UNI EN 1173 : 2008 COPPER AND COPPER ALLOYS - MATERIAL CONDITION DESIGNATION
UNI EN 1854 : 2010 PRESSURE SENSING DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES
UNI EN ISO 4404-1 : 2013 PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE CORROSION RESISTANCE OF FIRE-RESISTANT HYDRAULIC FLUIDS - PART 1: WATER-CONTAINING FLUIDS
UNI EN 13148 : 2010 COPPER AND COPPER ALLOYS - HOT-DIP TINNED STRIP
04/30076756 DC : DRAFT MAY 2004 ISO 6505 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF TENDENCY TO ADHERE TO AND CORRODE METALS
13/30290460 DC : 0 BS ISO 9940 - AEROSPACE SERIES - FLUID, HYDRAULIC, PHOSPHATE ESTER-BASE, FIRE RESISTANT - TECHNICAL SPECIFICATION
ISO 4126-2:2003 Safety devices for protection against excessive pressure Part 2: Bursting disc safety devices
15/30286859 DC : DRAFT JAN 2015 BS EN ISO 21028-1 - CRYOGENIC VESSELS - TOUGHNESS REQUIREMENTS FOR MATERIALS AT CRYOGENIC TEMPERATURE - PART 1: TEMPERATURES BELOW -80 DEGREES C
I.S. EN 12693:2008 REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS
S.R. CEN/TR 14585-3:2017 CORRUGATED METAL HOSE ASSEMBLIES FOR PRESSURE APPLICATIONS - PART 3: DESIGN METHOD
DIN EN 13611:2016-09 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
PREN 13611 : DRAFT 2017 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
DIN EN 12693:2016-10 (Draft) REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS
I.S. EN 13611:2015 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
EN 12861:2018 Copper and copper alloys - Scrap
EN 12480:2018 Gas meters - Rotary displacement gas meters
S.R. CEN ISO TR 20172:2009 WELDING - GROUPING SYSTEMS FOR MATERIALS - EUROPEAN MATERIALS
I.S. EN 12480:2018 GAS METERS - ROTARY DISPLACEMENT GAS METERS
I.S. EN 12861:1999 COPPER AND COPPER ALLOYS - SCRAP
I.S. CEN TS 13388:2004 COPPER AND COPPER ALLOYS - COMPENDIUM OF COMPOSITIONS AND PRODUCTS
DIN EN 1092-3:2004-10 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 3: Copper alloy flanges; German version EN 1092-3:2003 + AC:2004
UNE-CEN/TS 13388:2010 EX Copper and copper alloys - Compendium of compositions and products
BS EN 12284:2003 Refrigerating systems and heat pumps. Valves. Requirements, testing and marking
BS EN 1759-3:2003 Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, class designated Copper alloy flanges
BS EN 14986:2007 Design of fans working in potentially explosive atmospheres
ISO 21028-1:2016 Cryogenic vessels Toughness requirements for materials at cryogenic temperature Part 1: Temperatures below -80 degrees C
UNE-EN 13148:2012 Copper and copper alloys - Hot-dip tinned strip
ISO 10380:2012 Pipework — Corrugated metal hoses and hose assemblies
UNE-EN 13160-3:2017 Leak detection systems - Part 3: Requirements and test/assessment methods for liquid systems for tanks
UNE-EN 14986:2017 Design of fans working in potentially explosive atmospheres
BS EN 13599:2014 Copper and copper alloys. Copper plate, sheet and strip for electrical purposes
CEN/TS 13388:2015 Copper and copper alloys - Compendium of compositions and products
ISO 9226:2012 Corrosion of metals and alloys — Corrosivity of atmospheres — Determination of corrosion rate of standard specimens for the evaluation of corrosivity
BS EN 1092-3:2003 Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, PN designated Copper alloy flanges
EN ISO 10380:2012 Pipework - Corrugated metal hoses and hose assemblies (ISO 10380:2012)
EN 14986:2017 Design of fans working in potentially explosive atmospheres
EN 13599:2014 Copper and copper alloys - Copper plate, sheet and strip for electrical purposes
EN 1462:2004 Brackets for eaves gutters - Requirements and testing
EN 14436:2004 Copper and copper alloys - Electrolytically tinned strip
EN 1759-3:2003/AC:2004 FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, CLASS DESIGNATED - PART 3: COPPER ALLOY FLANGES
EN ISO 4404-1:2012 Petroleum and related products - Determination of the corrosion resistance of fire-resistant hydraulic fluids - Part 1: Water-containing fluids (ISO 4404-1:2012)
DIN EN ISO 9226:2012-05 Corrosion of metals and alloys - Corrosivity of atmospheres - Determination of corrosion rate of standard specimens for the evaluation of corrosivity (ISO 9226:2012)
PREN 13160-3 : DRAFT 2014 LEAK DETECTION SYSTEMS - PART 3: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR LIQUID SYSTEMS FOR TANKS
CEN/TR 14585-3:2017 Corrugated metal hose assemblies for pressure applications - Part 3: Design method
UNE-EN ISO 21028-1:2017 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 1: Temperatures below -80 °C (ISO 21028-1:2016)
PD CEN/TR 17144:2017 Resistance of metallic materials to liquid biogenic and alternative fuels and their blends
S.R. CEN ISO/TR 20172:2021 Welding - Grouping systems for materials - European materials (ISO/TR 20172:2021)
14/30301109 DC : 0 BS EN 50180-2 - BUSHINGS ABOVE 1 KV UP TO 52 KV AND FROM 250 A TO 3,15 KA FOR LIQUID FILLED TRANSFORMERS - PART 2: REQUIREMENT FOR BUSHING COMPONENTS
BS EN ISO 21028-1:2016 Cryogenic vessels. Toughness requirements for materials at cryogenic temperature Temperatures below -80 °C
I.S. EN ISO 21028-1:2016 CRYOGENIC VESSELS - TOUGHNESS REQUIREMENTS FOR MATERIALS AT CRYOGENIC TEMPERATURE - PART 1: TEMPERATURES BELOW -80 DEGREES C (ISO 21028-1:2016)
DIN CEN/TS 13388 E : 2013 COPPER AND COPPER ALLOYS - COMPENDIUM OF COMPOSITIONS AND PRODUCTS
UNI EN ISO 4126-2 : 2003 SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - BURSTING DISC SAFETY DEVICES
UNE-EN 13611:2016 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements
EN 13611:2015/AC:2016 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
DIN EN 1759-3:2004-10 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 3: Copper alloy flanges; German version EN 1759-3:2003 + AC:2004
DIN EN ISO 10380:2013-02 Pipework - Corrugated metal hoses and hose assemblies (ISO 10380:2012)
BS EN ISO 4404-1:2012 Petroleum and related products. Determination of the corrosion resistance of fire-resistant hydraulic fluids Water-containing fluids
BS EN 13160-3:2003 Leak detection systems Liquid systems for tanks
BS EN 1173:2008 Copper and copper alloys. Material condition designation
ISO/TR 20172:2009 Welding Grouping systems for materials European materials
DIN EN 12693:2008-09 REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS
EN 13148 : 2010 COPPER AND COPPER ALLOYS - HOT-DIP TINNED STRIP
EN 12284 : 2003 REFRIGERATING SYSTEMS AND HEAT PUMPS - VALVES - REQUIREMENTS, TESTING AND MARKING
I.S. EN 13611:2015/AC:2016 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
DIN EN 14436:2004-11 Copper and copper alloys - Electrolytically tinned strip

ISO 6507-1:2005 Metallic materials Vickers hardness test Part 1: Test method
EN 1655:1997 Copper and copper alloys - Declarations of conformity
EN 10002-1 : 2001 METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE
EN 1412:2016 Copper and copper alloys - European numbering system
ISO 1190-1:1982 Copper and copper alloys Code of designation Part 1: Designation of materials
ISO 2624:1990 Copper and copper alloys Estimation of average grain size
ISO 8490:1986 Metallic materials Sheet and strip Modified Erichsen cupping test
ISO 6507-2:2005 Metallic materials Vickers hardness test Part 2: Verification and calibration of testing machines
ISO 1811-2:1988 Copper and copper alloys Selection and preparation of samples for chemical analysis Part 2: Sampling of wrought products and castings
ISO 7799:1985 Metallic materials — Sheet and strip 3 mm thick or less — Reverse bend test
EN ISO 9002:1994/AC:1997 QUALITY SYSTEMS - SPECIFICATION FOR PRODUCTION AND INSTALLATION
ISO 197-3:1983 Copper and copper alloys Terms and definitions Part 3: Wrought products
EN 1653:1997/A1:2000 COPPER AND COPPER ALLOYS - PLATE, SHEET AND CIRCLES FOR BOILERS, PRESSURE VESSELS AND HOT WATER STORAGE UNITS
ISO 9002:1994 Quality systems — Model for quality assurance in production, installation and servicing
EN 1173:2008 Copper and copper alloys - Material condition designation
ISO 31-0:1992 Quantities and units Part 0: General principles
ISO 7438:2016 Metallic materials Bend test
EN ISO 9001:2015 Quality management systems - Requirements (ISO 9001:2015)
EN ISO 2624:1995 Copper and copper alloys - Estimation of average grain size (ISO 2624:1990)
EN 10204:2004 Metallic products - Types of inspection documents
ISO 9001:2015 Quality management systems — Requirements

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.