• There are no items in your cart

API SPEC 17J : 2014

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

SPECIFICATION FOR UNBONDED FLEXIBLE PIPE
Available format(s)

Hardcopy , PDF

Superseded date

05-13-2021

Published date

05-01-2014

1 Scope
2 Normative References
3 Terms, Definitions, Acronyms, Abbreviations,
   and Symbols
4 Functional Requirements
5 Design Requirements
6 Materials
7 Manufacturing Requirements
8 Documentation
9 Factory Acceptance Tests (FATs)
10 Marking and Packaging
Annex A (informative) - API Monogram Program Use of the
        API Monogram by Licensees
Annex B (informative) - Purchasing Guidelines
Annex C (informative) - Flexible Pipe Datasheet
Bibliography

Describes the technical requirements for safe, dimensionally and functionally interchangeable flexible pipes that are designed and manufactured to uniform standards and criteria.

DevelopmentNote
Incorporates ERRATA 1 2016. (05/2017)
DocumentType
Standard
Pages
100
ProductNote
This product is unavailable in Cuba, Iran, North Korea, Syria NEW CHILD ERR 2 IS NOW ADDED NEW CHILD ERR 1 2016 IS NOW ADDED
PublisherName
American Petroleum Institute
Status
Superseded
SupersededBy
Supersedes

API 92U : 2008 : INC : ADD 1 : 2015 : R201300 UNDERBALANCED DRILLING OPERATIONS
04/19985215 DC : DRAFT DEC 2004 BS ISO 19904-1 - PETROLEUM AND NATURAL GAS INDUSTRIES - FLOATING OFFSHORE STRUCTURES - PART 1: MONOHULLS, SEMI-SUBMERSIBLES AND SPARS
03/312144 DC : DRAFT JULY 2003 ISO 13628-10 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 10 - BONDED FLEXIBLE PIPE
API 17L1 : 2013 SPECIFICATION FOR FLEXIBLE PIPE ANCILLARY EQUIPMENT
API RP 17B : 2014 RECOMMENDED PRACTICE FOR FLEXIBLE PIPE
CSA Z662.1 : 2013 COMMENTARY ON CSA Z662-07, OIL AND GAS PIPELINE SYSTEMS
EEMUA 194 : 2012 GUIDELINES FOR MATERIALS SELECTION AND CORROSION CONTROL FOR SUBSEA OIL AND GAS PRODUCTION EQUIPMENT
API 15S : 2016 SPOOLABLE REINFORCED PLASTIC LINE PIPE
BS EN ISO 13628-2:2006 Petroleum and natural gas industries. Design and operation of subsea production systems Unbonded flexible pipe systems for subsea and marine applications
API 92U : 2008 UNDERBALANCED DRILLING OPERATIONS
API RP 17R : 2015 RECOMMENDED PRACTICE FOR FLOWLINE CONNECTORS AND JUMPERS
API 2FPS : 2011 PLANNING, DESIGNING, AND CONSTRUCTING FLOATING PRODUCTION SYSTEMS
ISO 19904-1:2006 Petroleum and natural gas industries Floating offshore structures Part 1: Monohulls, semi-submersibles and spars
I.S. EN ISO 19904-1:2006 PETROLEUM AND NATURAL GAS INDUSTRIES - FLOATING OFFSHORE STRUCTURES - PART 1: MONOHULLS, SEMI-SUBMERSIBLES AND SPARS
03/314812 DC : DRAFT SEP 2003 ISO 13628-1 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS
CSA ISO 19904-1 : 2007 : R2017 PETROLEUM AND NATURAL GAS INDUSTRIES - FLOATING OFFSHORE STRUCTURES - PART 1: MONOHULLS, SEMI-SUBMERSIBLES AND SPARS
API 2T REDLINE : 2010 PLANNING, DESIGNING, AND CONSTRUCTING TENSION LEG PLATFORMS
CSA Z662 PACKAGE : 2011 CONSISTS OF Z662-11, OIL AND GAS PIPELINE SYSTEMS AND Z662.1-11, COMMENTARY ON CSA Z662-11, OIL AND GAS PIPELINE SYSTEMS
NORSOK Y 002 : REV 1 LIFE EXTENSION FOR TRANSPORTATION SYSTEMS
ASTM F 2896 : 2011 : R2017 Standard Specification for Reinforced Polyethylene Composite Pipe For The Transport Of Oil And Gas And Hazardous Liquids
I.S. EN ISO 13628-2:2006 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS
I.S. EN ISO 14224:2016 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COLLECTION AND EXCHANGE OF RELIABILITY AND MAINTENANCE DATA FOR EQUIPMENT (ISO 14224:2016)
ASME B31.8 : 2016 Gas Transmission and Distribution Piping Systems
BS PD8010-2(2015) : 2015 PIPELINE SYSTEMS - PART 2: SUBSEA PIPELINES - CODE OF PRACTICE
PD 8010-2:2015+A1:2016 Pipeline systems Subsea pipelines. Code of practice
API 92U : 2008 : R2013 UNDERBALANCED DRILLING OPERATIONS
API TR 1PER15K-1 : 2013 PROTOCOL FOR VERIFICATION AND VALIDATION OF HIGH-PRESSURE HIGH-TEMPERATURE EQUIPMENT
14/30286899 DC : 0 PD 8010-2 - PIPELINE SYSTEMS - PART 2: SUBSEA PIPELINES - CODE OF PRACTICE
UNI EN ISO 23936-1 : 2009 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 1: THERMOPLASTICS
API SPEC 17E : 2017 SPECIFICATION FOR SUBSEA UMBILICALS
API TR 17TR1 : 2003 EVALUATION STANDARD FOR INTERNAL PRESSURE SHEATH POLYMERS FOR HIGH TEMPERATURE FLEXIBLE PIPES
API 2T : 2010 : R2015 PLANNING, DESIGNING, AND CONSTRUCTING TENSION LEG PLATFORMS
API 2RD : 2013 DYNAMIC RISERS FOR FLOATING PRODUCTION SYSTEMS
API 17E REDLINE : 2010 SPECIFICATION FOR SUBSEA UMBILICALS
API SPEC 17K : 2017 SPECIFICATION FOR BONDED FLEXIBLE PIPE
CAN/CSA-Z662-15 Oil and gas pipeline systems
ISO 14224:2016 Petroleum, petrochemical and natural gas industries Collection and exchange of reliability and maintenance data for equipment
UNI EN ISO 13628-2 : 2007 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS
EN ISO 13628-10:2006 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 10: Specification for bonded flexible pipe (ISO 13628-10:2006)
UNI EN ISO 13628-5 : 2010 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 5: SUBSEA UMBILICALS
BS EN ISO 23936-1:2009 Petroleum, petrochemical and natural gas industries — Non-metallic materials in contact with media related to oil and gas production Part 1: Thermoplastics
PD 8010-2:2004 Code of practice for pipelines Subsea pipelines
API 92M : 2017 MANAGED PRESSURE DRILLING OPERATIONS WITH SURFACE BACK-PRESSURE
API TR 17TR2 : 2003 THE AGEING OF PA-11 IN FLEXIBLE PIPES
BS EN ISO 13628-10:2006 Petroleum and natural gas industries. Design and operation of subseaprod uction systems Specification for bonded flexible pipe
ISO 13628-5:2009 Petroleum and natural gas industries Design and operation of subsea production systems Part 5: Subsea umbilicals
BS EN ISO 19904-1:2006 Petroleum and natural gas industries. Floating offshore structures Monohulls, semi-submersibles and spars
ISO 23936-1:2009 Petroleum, petrochemical and natural gas industries — Non-metallic materials in contact with media related to oil and gas production — Part 1: Thermoplastics
ISO 13628-2:2006 Petroleum and natural gas industries Design and operation of subsea production systems Part 2: Unbonded flexible pipe systems for subsea and marine applications
EN ISO 13628-5:2009 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 5: Subsea umbilicals (ISO 13628-5:2009)
EN ISO 23936-1:2009 Petroleum, petrochemical and natural gas industries - Non-metallic materials in contact with media related to oil and gas production - Part 1: Thermoplastics (ISO 23936-1:2009)
EN ISO 19904-1:2006 Petroleum and natural gas industries - Floating offshore structures - Part 1: Monohulls, semi-submersibles and spars (ISO 19904-1:2006)
I.S. EN ISO 13628-5:2009 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 5: SUBSEA UMBILICALS
17/30291980 DC : 0 BS EN ISO 19904-1 - PETROLEUM AND NATURAL GAS INDUSTRIES - FLOATING OFFSHORE STRUCTURES - PART 1: SHIP-SHAPED, SEMI-SUBMERSIBLE, SPAR AND SHALLOW-DRAUGHT CYLINDRICAL STRUCTURES
ASTM F 2805 : 2016 : REDLINE Standard Specification for Multilayer Thermoplastic And Flexible Steel Pipe And Connections
BS ISO 19904-1 : 2006 AMD 16927 PETROLEUM AND NATURAL GAS INDUSTRIES - FLOATING OFFSHORE STRUCTURES - PART 1: MONOHULLS, SEMI-SUBMERSIBLES AND SPARS
07/30150249 DC : 0 BS EN ISO 23936-1 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 1: THERMOPLASTICS
BS EN ISO 13628-5:2009 Petroleum and natural gas industries. Design and operation of subsea production systems Subsea umbilicals
API 17L2 : 2013 RECOMMENDED PRACTICE FOR FLEXIBLE PIPE ANCILLARY EQUIPMENT
CSA ISO 19904-1 : 2007 : R2012 PETROLEUM AND NATURAL GAS INDUSTRIES - FLOATING OFFSHORE STRUCTURES - PART 1: MONOHULLS, SEMI-SUBMERSIBLES AND SPARS
CSA ISO 19904-1 : 2007 PETROLEUM AND NATURAL GAS INDUSTRIES - FLOATING OFFSHORE STRUCTURES - PART 1: MONOHULLS, SEMI-SUBMERSIBLES AND SPARS
API RP 2T : 2010 PLANNING, DESIGNING, AND CONSTRUCTING TENSION LEG PLATFORMS
ISO/TS 18226:2006 Plastics pipes and fittings — Reinforced thermoplastics pipe systems for the supply of gaseous fuels for pressures up to 4 MPa (40 bar)
I.S. EN ISO 23936-1:2009 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 1: THERMOPLASTICS
ASTM F 2896 : 2011 Standard Specification for Reinforced Polyethylene Composite Pipe For The Transport Of Oil And Gas And Hazardous Liquids
EN ISO 13628-2:2006/AC:2009 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS
ISO 13628-10:2005 Petroleum and natural gas industries — Design and operation of subsea production systems — Part 10: Specification for bonded flexible pipe
BS EN ISO 14224:2016 Petroleum, petrochemical and natural gas industries. Collection and exchange of reliability and maintenance data for equipment

ASTM D 2857 : 2016 Standard Practice for Dilute Solution Viscosity of Polymers
ISO 6507-1:2005 Metallic materials Vickers hardness test Part 1: Test method
ISO 75-1:2013 Plastics Determination of temperature of deflection under load Part 1: General test method
ASTM E 328 : 2013 : REDLINE Standard Test Methods for Stress Relaxation Tests for Materials and Structures
API STD 1104:2013 WELDING OF PIPELINES AND RELATED FACILITIES
ISO 6506-1:2014 Metallic materials Brinell hardness test Part 1: Test method
ASTM C 518 : 2017 : REDLINE Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
API 17L2 : 2013 RECOMMENDED PRACTICE FOR FLEXIBLE PIPE ANCILLARY EQUIPMENT
ISO 974:2000 Plastics Determination of the brittleness temperature by impact
ISO 8457-2:1989 Steel wire rod Part 2: Quality requirements for unalloyed steel wire rods for conversion to wire
ISO 2556:1974 Plastics Determination of the gas transmission rate of films and thin sheets under atmospheric pressure Manometric method
ASME PV CODE 9 : 2017 BOILER AND PRESSURE VESSEL CODE - WELDING, BRAZING, AND FUSING QUALIFICATIONS - QUALIFICATION STANDARD FOR WELDING, BRAZING, AND FUSING PROCEDURES; WELDERS; BRAZERS; AND WELDING, BRAZING, AND FUSING OPERATORS
API TR 17TR2 : 2003 THE AGEING OF PA-11 IN FLEXIBLE PIPES
ASTM D 1141 : 1998 : EDT 1 Standard Practice for the Preparation of Substitute Ocean Water
ISO 8692:2012 Water quality — Fresh water algal growth inhibition test with unicellular green algae
ISO 6508-1:2016 Metallic materials — Rockwell hardness test — Part 1: Test method
API 6A : 2010 SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT
API SPEC 17K : 2017 SPECIFICATION FOR BONDED FLEXIBLE PIPE
ASTM E 384 : 2017 : REDLINE Standard Test Method for Microindentation Hardness of Materials
ISO 6892:1998 Metallic materials Tensile testing at ambient temperature
ASTM D 1238 : 2013 : REDLINE Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
NACE TM 01 77 : 2016 LABORATORY TESTING OF METALS FOR RESISTANCE TO SULFIDE STRESS CRACKING AND STRESS CORROSION CRACKING IN H[2]S ENVIRONMENTS
ASTM D 792 : 2013 : REDLINE Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement
ISO 11359-2:1999 Plastics Thermomechanical analysis (TMA) Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature
BS EN ISO 15607:2003 Specification and qualification of welding procedures for metallic materials. General rules
ISO 9352:2012 Plastics — Determination of resistance to wear by abrasive wheels
ISO 75-2:2013 Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite
ISO 527-2:2012 Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics
ISO 148-1:2016 Metallic materials — Charpy pendulum impact test — Part 1: Test method
ASTM D 1525 : 2017 Standard Test Method for Vicat Softening Temperature of Plastics
ISO 13847:2013 Petroleum and natural gas industries Pipeline transportation systems Welding of pipelines
ISO 11357-4:2014 Plastics Differential scanning calorimetry (DSC) Part 4: Determination of specific heat capacity
ISO 8302:1991 Thermal insulation — Determination of steady-state thermal resistance and related properties — Guarded hot plate apparatus
ISO 8301:1991 Thermal insulation Determination of steady-state thermal resistance and related properties Heat flow meter apparatus
API SPEC 16C : 2015 CHOKE AND KILL EQUIPMENT
ASTM D 1044 : 2013 : REDLINE Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion
ISO 180:2000 Plastics Determination of Izod impact strength
API 17L1 : 2013 SPECIFICATION FOR FLEXIBLE PIPE ANCILLARY EQUIPMENT
API Q1 : 2013 SPECIFICATION FOR QUALITY MANAGEMENT SYSTEM REQUIREMENTS FOR MANUFACTURING ORGANIZATIONS FOR THE PETROLEUM AND NATURAL GAS INDUSTRY
ISO 3384:2005 Rubber, vulcanized or thermoplastic Determination of stress relaxation in compression at ambient and at elevated temperatures
ASTM D 790 : 2017 : REDLINE Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
ISO 10474:2013 Steel and steel products — Inspection documents
ISO 307:2007 Plastics Polyamides Determination of viscosity number
ISO 604:2002 Plastics — Determination of compressive properties
EN 10204:2004 Metallic products - Types of inspection documents
API RP 17B : 2014 RECOMMENDED PRACTICE FOR FLEXIBLE PIPE
ISO 15589-2:2012 Petroleum, petrochemical and natural gas industries — Cathodic protection of pipeline transportation systems — Part 2: Offshore pipelines
ISO 62:2008 Plastics Determination of water absorption
API TR 17TR1 : 2003 EVALUATION STANDARD FOR INTERNAL PRESSURE SHEATH POLYMERS FOR HIGH TEMPERATURE FLEXIBLE PIPES
ISO 306:2013 Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST)
API SPEC 17E : 2017 SPECIFICATION FOR SUBSEA UMBILICALS
ASTM E 709 : 2015 : REDLINE Standard Guide for Magnetic Particle Testing
ISO 899-1:2017 Plastics — Determination of creep behaviour — Part 1: Tensile creep
ASTM D 695 : 2015 : REDLINE Standard Test Method for Compressive Properties of Rigid Plastics
ASTM D 5028 : 2017 : REDLINE Standard Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis
ASTM D 570 : 1998 : R2018 Standard Test Method for Water Absorption of Plastics
ISO 11357-1:2016 Plastics — Differential scanning calorimetry (DSC) — Part 1: General principles
ISO 178:2010 Plastics Determination of flexural properties
ASTM D 2990 : 2017 : REDLINE Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics
ISO 1133:2005 Plastics Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
API 17D : 2011 DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - SUBSEA WELLHEAD AND TREE EQUIPMENT
ASTM D 638 : 2014 : REDLINE Standard Test Method for Tensile Properties of Plastics
ASTM D 746 : 2014 : REDLINE Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact
ISO 527-1:2012 Plastics Determination of tensile properties Part 1: General principles
ISO 868:2003 Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness)
ASTM D 1693 : 2015 : REDLINE Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics
ASTM D 1418 : 2017 : REDLINE Standard Practice for Rubber and Rubber Latices—Nomenclature
EN 287-1:2011 Qualification test of welders - Fusion welding - Part 1: Steels

View more information
US$157.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.