• There are no items in your cart

ISO/IEC 15018:2004

Withdrawn
Withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

View Superseded by
withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

Information technology Generic cabling for homes
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Withdrawn date

03-20-2019

Published date

07-16-2004

ISO/IEC 15018:2004 specifies a generic cabling for three groups of applications in homes: Information and Communications Technologies (ICT), Broadcast and Communications Technologies (BCT), and Commands, Controls and Communications in Buildings (CCCB). It is intended to guide installations in new buildings or refurbishments, and also applies where cabling is installed to support only one or two of the three application groups listed above. A generic cabling infrastructure is specified based upon balanced cabling and / or coaxial cabling. ICT channels specified in this standard include optical fibre, but the wider use of fibre optical cabling in a home is for further study. The three groups of applications may also be supported by different types of cabling, which may be subject to other International Standards. For example, ISO/IE cabling for ICT applications in general for the office environment. While the cabling structure and reference implementations are matched to the home environment in ISO/IEC 15018:2004, the channel performances specified for ICT are identical to those specified in ISO/IEC 11801.

DocumentType
Standard
Pages
72
PublisherName
International Organization for Standardization
Status
Withdrawn
SupersededBy

ISO/IEC 14762:2009 Information technology Functional safety requirements for Home and Building Electronic Systems (HBES)
CAN/CSA-ISO/IEC 14543-3-1-07 (R2017) Information Technology - Home Electronic System (HES) Architecture - Part 3-1: Communication Layers - Application Layer for Network Based Control of HES Class 1 (Adopted ISO/IEC 14543-3-1:2006, first edition, 2006-09)
CSA ISO/IEC 14543-2-1 : 2007 INFORMATION TECHNOLOGY - HOME ELECTRONIC SYSTEMS (HES) ARCHITECTURE - PART 2-1: INTRODUCTION AND DEVICE MODULARITY
CSA ISO/IEC 14543-3-1 : 2007 INFORMATION TECHNOLOGY - HOME ELECTRONIC SYSTEMS (HES) ARCHITECTURE - PART 3-1: COMMUNICATION LAYERS - APPLICATION LAYER FOR NETWORK BASED CONTROL OF HES CLASS 1
CSA ISO/IEC 14543-3-7 : 2007 : R2012 INFORMATION TECHNOLOGY - HOME ELECTRONIC SYSTEM (HES) ARCHITECTURE - PART 3-7: MEDIA AND MEDIA DEPENDENT LAYERS - RADIO FREQUENCY FOR NETWORK BASED CONTROL OF HES CLASS 1
CSA ISO/IEC 14543-3-5 : 2008 : R2013 INFORMATION TECHNOLOGY - HOME ELECTRONIC SYSTEM (HES) ARCHITECTURE - PART 3-5: MEDIA AND MEDIA DEPENDENT LAYERS - POWERLINE FOR NETWORK BASED CONTROL OF HES CLASS 1
I.S. EN 61280-4-2:2014 FIBRE-OPTIC COMMUNICATION SUBSYSTEM TEST PROCEDURES - PART 4-2: INSTALLED CABLE PLANT - SINGLE-MODE ATTENUATION AND OPTICAL RETURN LOSS MEASUREMENT
ISO/IEC 14763-2:2012 Information technology Implementation and operation of customer premises cabling Part 2: Planning and installation
ISO/IEC 18010:2002 Information technology Pathways and spaces for customer premises cabling
ISO/IEC 14543-3-4:2007 Information technology Home electronic system (HES) architecture Part 3-4: System management Management procedures for network based control of HES Class 1
ISO/IEC 14543-3-6:2007 Information technology Home electronic system (HES) architecture Part 3-6: Media and media dependent layers Network based on HES Class 1, twisted pair
EN 61280-4-2:2014 Fibre-optic communication subsystem test procedures - Part 4-2: Installed cable plant - Single-mode attenuation and optical return loss measurement
ISO/IEC 14543-3-2:2006 Information technology Home Electronic Systems (HES) Architecture Part 3-2: Communication layers Transport, network and general parts of data link layer for network based control of HES Class 1
CEI CWA 50487 : 2006 SMARTHOUSE CODE OF PRACTICE
PD ISO/IEC TR 29125:2010 Information technology. Telecommunications cabling requirements for remote powering of terminal equipment
NF EN 50090-9-1 : 2004 HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 9-1: INSTALLATION REQUIREMENTS - GENERIC CABLING FOR HBES CLASS 1 TWISTED PAIR
CSA ISO/IEC 14763-3 : 2015 INFORMATION TECHNOLOGY - IMPLEMENTATION AND OPERATION OF CUSTOMER PREMISES CABLING - PART 3: TESTING OF OPTICAL FIBRE CABLING
CAN/CSA-ISO/IEC 14543-3-3-07 (R2017) Information Technology - Home Electronic System (HES) Architecture - Part 3-3: User Process for Network Based Control of HES Class 1 (Adopted ISO/IEC 14543-3-3:2007, first edition, 2007-01)
CSA ISO/IEC 14543-3-2 : 2007 : R2012 INFORMATION TECHNOLOGY - HOME ELECTRONIC SYSTEMS (HES) ARCHITECTURE - PART 3-2: COMMUNICATION LAYERS - TRANSPORT, NETWORK AND GENERAL PARTS OF DATA LINK LAYER FOR NETWORK BASED CONTROL OF HES CLASS 1
CSA ISO/IEC 14543-3-1 : 2007 : R2012 INFORMATION TECHNOLOGY - HOME ELECTRONIC SYSTEMS (HES) ARCHITECTURE - PART 3-1: COMMUNICATION LAYERS - APPLICATION LAYER FOR NETWORK BASED CONTROL OF HES CLASS 1
CSA ISO /IEC 14543-3-4 : 2007 INFORMATION TECHNOLOGY - HOME ELECTRONIC SYSTEM (HES) ARCHITECTURE - PART 3-4: SYSTEM MANAGEMENT - MANAGEMENT PROCEDURES FOR NETWORK BASED CONTROL OF HES CLASS 1
CAN/CSA-ISO/IEC 14543-2-1-07 (R2017) Information Technology - Home Electronic System (HES) Architecture - Part 2-1: Introduction and Device Modularity (Adopted ISO/IEC 14543-2-1:2006, first edition, 2006-09)
CSA ISO/IEC 14543-3-4 : 2007 : R2012 INFORMATION TECHNOLOGY - HOME ELECTRONIC SYSTEM (HES) ARCHITECTURE - PART 3-4: SYSTEM MANAGEMENT - MANAGEMENT PROCEDURES FOR NETWORK BASED CONTROL OF HES CLASS 1
CSA ISO/IEC 14543-3-3 : 2007 : R2012 INFORMATION TECHNOLOGY - HOME ELECTRONIC SYSTEM (HES) ARCHITECTURE - PART 3-3: USER PROCESS FOR NETWORK BASED CONTROL OF HES CLASS 1
CEI EN 61935-3 : 2011 TESTING OF BALANCED AND COAXIAL INFORMATION TECHNOLOGY CABLING - PART 3: INSTALLED CABLING AS SPECIFIED IN EN 50173-4 AND RELATED STANDARDS
ISO/IEC 14543-2-1:2006 Information technology - Home electronic systems (HES) architecture Part 2-1: Introduction and device modularity
BS PD ISO/IEC TR 29106 : 2007 INFORMATION TECHNOLOGY - GENERIC CABLING - INTRODUCTION TO THE MICE ENVIRONMENTAL CLASSIFICATION
ISO/IEC 14763-3:2014 Information technology Implementation and operation of customer premises cabling Part 3: Testing of optical fibre cabling
ISO/IEC TR 29125:2010 Information technology Telecommunications cabling requirements for remote powering of terminal equipment
IEC 61156-8:2009+AMD1:2013 CSV Multicore and symmetrical pair/quad cables for digital communications - Part 8: Symmetrical pair/quad cables with transmission characteristics up to 1 200 MHz - Work area wiring - Sectional specification
IEC 61196-7:2011 Coaxial communication cables - Part 7: Sectional specification for cables for BCT cabling in accordance with ISO/IEC 15018 - Indoor drop cables for systems operating at 5 MHz - 3 000 MHz
I.S. EN 61918:2013 INDUSTRIAL COMMUNICATION NETWORKS - INSTALLATION OF COMMUNICATION NETWORKS IN INDUSTRIAL PREMISES
BS EN 61280-4-2:2014 Fibre-optic communication subsystem test procedures Installed cable plant. Single-mode attenuation and optical return loss measurement
07/30144774 DC : 0 BS EN 61935-3 - TESTING OF BALANCED COMMUNICATION CABLING IN ACCORDANCE WITH ISO/IEC 11801 - PART 3: VERIFICATION AND QUALIFICATION TESTING OF COMMUNICATION CABLING IN ACCORDANCE
CEI EN 61280-4-2 : 2015 FIBRE-OPTIC COMMUNICATION SUBSYSTEM TEST PROCEDURES - PART 4-2: INSTALLED CABLE PLANT - SINGLE-MODE ATTENUATION AND OPTICAL RETURN LOSS MEASUREMENT
ISO/IEC TR 29108:2013 Information technology Terminology for intelligent homes
CSA ISO/IEC 14543-3-5 : 2008 INFORMATION TECHNOLOGY - HOME ELECTRONIC SYSTEM (HES) ARCHITECTURE - PART 3-5: MEDIA AND MEDIA DEPENDENT LAYERS - POWERLINE FOR NETWORK BASED CONTROL OF HES CLASS 1
CEI 64-100/2 : 2009 RESIDENTIAL BUILDINGS CRITERIA FOR THE INFRASTRUCTURES FOR ELECTRIC, ELECTRONIC AND COMMUNICATIONS INSTALLATIONS - PART 2: FLATS
ISO/IEC 11801:2002 Information technology Generic cabling for customer premises
I.S. EN 50090-9-1:2004 HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 9-1: INSTALLATION REQUIREMENTS - GENERIC CABLING FOR HBES CLASS 1 TWISTED PAIR
IEC 61935-3:2008 Testing of balanced and coaxial information technology cabling - Part 3: Installed cabling as specified in ISO/IEC 15018 and related standards
ISO/IEC 14543-3-5:2007 Information technology Home electronic system (HES) architecture Part 3-5: Media and media dependent layers Power line for network based control of HES Class 1
IEC 61918:2013 Industrial communication networks - Installation of communication networks in industrial premises
EN 50090-9-1:2004 Home and Building Electronic Systems (HBES) - Part 9-1: Installation requirements - Generic cabling for HBES Class 1 Twisted Pair
PD IEC/TR 62839-1:2014 Environmental declaration Wires, cables and accessory products. Specific rules
BS EN 50090-9-1:2004 Home and building electronic systems (HBES) Installation requirements - Generic cabling for HBES class 1 twisted pair
CAN/CSA-ISO/IEC 14543-3-7-07 (R2017) Information Technology - Home Electronic System (HES) Architecture - Part 3-7: Media and Media Dependent Layers - Radio Frequency for Network Based Control of HES Class 1 (Adopted ISO/IEC 14543-3-7:2007, first edition, 2007-01)
CSA ISO/IEC 24740 : 2008 : R2013 INFORMATION TECHNOLOGY - RESPONSIVE LINK (RL)
CSA ISO/IEC 14543-3-3 : 2007 INFORMATION TECHNOLOGY - HOME ELECTRONIC SYSTEM (HES) ARCHITECTURE - PART 3-3: USER PROCESS FOR NETWORK BASED CONTROL OF HES CLASS 1
CSA ISO/IEC 14543-3-2 : 2007 INFORMATION TECHNOLOGY - HOME ELECTRONIC SYSTEMS (HES) ARCHITECTURE - PART 3-2: COMMUNICATION LAYERS - TRANSPORT, NETWORK AND GENERAL PARTS OF DATA LINK LAYER FOR NETWORK BASED CONTROL OF HES CLASS 1
CSA ISO/IEC 14543-2-1 : 2007 : R2012 INFORMATION TECHNOLOGY - HOME ELECTRONIC SYSTEMS (HES) ARCHITECTURE - PART 2-1: INTRODUCTION AND DEVICE MODULARITY
CSA ISO/IEC 14543-3-6 : 2007 : R2012 INFORMATION TECHNOLOGY - HOME ELECTRONIC SYSTEM (HES) ARCHITECTURE - PART 3-6: MEDIA AND MEDIA DEPENDENT LAYERS - TWISTED PAIR FOR NETWORK BASED CONTROL OF HES CLASS 1
CAN/CSA-ISO/IEC 14543-3-2-07 (R2017) Information Technology - Home Electronic System (HES) Architecture - Part 3-2: Communication Layers - Transport, Network and General Parts of Data Link Layer for Network Based Control of HES Class 1 (Adopted ISO/IEC 14543-3-2:2006, first edition, 2006-09)
CSA ISO/IEC 18010 :2004 INFORMATION TECHNOLOGY - PATHWAYS AND SPACES FOR CUSTOMER PREMISES CABLING
ISO/IEC 14908-2:2012 Information technology — Control network protocol — Part 2: Twisted pair communication
CEI EN 50090-9-1 : 2005 HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 9-1: INSTALLATION REQUIREMENTS - GENERIC CABLING FOR HBES CLASS 1 TWISTED PAIR
ISO/IEC 14543-3-3:2007 Information technology Home electronic system (HES) architecture Part 3-3: User process for network based control of HES Class 1
ISO/IEC 14543-3-1:2006 Information technology Home electronic systems (HES) architecture Part 3-1: Communication layers Application layer for network based control of HES Class 1
ISO/IEC 24740:2008 Information technology Responsive Link (RL)
ISO/IEC 15067-3:2012 Information technology Home Electronic System (HES) application model Part 3: Model of a demand-response energy management system for HES
IEC TR 62839-1:2014 Environmental declaration - Part 1: Wires, cables and accessory products - Specific rules
ISO/IEC TR 29106:2007 Information technology Generic cabling Introduction to the MICE environmental classification
BS EN 61918:2013 Industrial communication networks. Installation of communication networks in industrial premises
IEC 61280-4-2:2014 Fibre-optic communication subsystem test procedures - Part 4-2: Installed cable plant - Single-mode attenuation and optical return loss measurement
BS ISO/IEC 30129 : 2015 INFORMATION TECHNOLOGY - TELECOMMUNICATIONS BONDING NETWORKS FOR BUILDINGS AND OTHER STRUCTURES
ISO/IEC 30129:2015 Information technology Telecommunications bonding networks for buildings and other structures
CSA ISO/IEC 14762 : 2010 INFORMATION TECHNOLOGY - FUNCTIONAL SAFETY REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES)
09/30211785 DC : 0 BS ISO/IEC 14763-2 - INFORMATION TECHNOLOGY - IMPLEMENTATION AND OPERATION OF CUSTOMER PREMISES CABLING - PART 2: PLANNING AND INSTALLATION
CAN/CSA-ISO/IEC 14543-3-4-07 (R2017) Information Technology - Home Electronic System (HES) Architecture - Part 3-4: System Management - Management Procedures for Network Based Control of HES Class 1 (Adopted ISO/IEC 14543-3-4:2007, first edition, 2007-01)
CSA ISO/IEC 14543-3-6 : 2007 INFORMATION TECHNOLOGY - HOME ELECTRONIC SYSTEM (HES) ARCHITECTURE - PART 3-6: MEDIA AND MEDIA DEPENDENT LAYERS - TWISTED PAIR FOR NETWORK BASED CONTROL OF HES CLASS 1
CAN/CSA-ISO/IEC 14543-3-6-07 (R2017) Information Technology - Home Electronic System (HES) Architecture - Part 3-6: Media and Media Dependent Layers - Twisted Pair for Network Based Control of HES Class 1 (Adopted ISO/IEC 14543-3-6:2007, first edition, 2007-01)
CSA ISO/IEC 18010 : 2004 : INC : AMD 1 : 2006 : R2012 INFORMATION TECHNOLOGY - PATHWAYS AND SPACES FOR CUSTOMER PREMISES CABLING
CSA ISO/IEC 24740 : 2008 INFORMATION TECHNOLOGY - RESPONSIVE LINK (RL)
TR 105 174-5-1 : 1.1.1 ACCESS, TERMINALS, TRANSMISSION AND MULTIPLEXING (ATTM); BROADBAND DEPLOYMENT - ENERGY EFFICIENCY AND KEY PERFORMANCE INDICATORS; PART 5: CUSTOMER NETWORK INFRASTRUCTURES; SUB-PART 1: HOMES (SINGLE-TENANT)
ISO/IEC 14543-3-7:2007 Information technology Home electronic system (HES) architecture Part 3-7: Media and media dependent layers Radio frequency for network based control of HES Class 1
EN 61918:2013/AC:2014 INDUSTRIAL COMMUNICATION NETWORKS - INSTALLATION OF COMMUNICATION NETWORKS IN INDUSTRIAL PREMISES (IEC 61918:2013, MODIFIED)

IEC 61537:2006 Cable management - Cable tray systems and cable ladder systems
IEC 60603-7-1:2011 Connectors for electronic equipment - Part 7-1: Detail specification for 8-way, shielded, free and fixed connectors
IEC 60512-25-4:2001 Connectors for electronic equipment - Tests and measurements - Part 25-4: Test 25d - Propagation delay
IEC 60512-23-7:2005 Connectors for electronic equipment - Tests and measurements - Part 23-7: Screening and filtering tests - Test 23g: Effective transfer impedance of connectors
IEC 60364-5-54:2011 Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors
IEC 60352-3:1993 Solderless connections - Part 3: Solderless accessible insulation displacement connections - General requirements, test methods and practical guidance
IEC 60874-19-2:1999 Connectors for optical fibres and cables - Part 19-2: Fibre optic adaptor (duplex) type SC for single-mode fibre connectors - Detail specification
IEC 60352-6:1997 Solderless connections - Part 6: Insulation piercing connections - General requirements, test methods and practical guidance
IEC 60189-1:2007 Low-frequency cables and wires with PVC insulation and PVC sheath - Part 1: General test and measuring methods
IEC 60364-4-41:2005+AMD1:2017 CSV Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock
IEC 60603-7-2:2010 Connectors for electronic equipment - Part 7-2: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 100 MHz
IEC 60966-2-6:2016 Radio frequency and coaxial cable assemblies - Part 2-6: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 3 000 MHz, IEC 61169-24 connectors
IEC 60050-151:2001 International Electrotechnical Vocabulary (IEV) - Part 151: Electrical and magnetic devices
IEC 60332-1:1993 Tests on electric cables under fire conditions - Part 1: Test on a single vertical insulated wire or cable
ISO/IEC 11801:2002 Information technology Generic cabling for customer premises
IEC 60966-1:1999 Radio frequency and coaxial cable assemblies - Part 1: Generic specification - General requirements and test methods
IEC TR 61000-5-2:1997 Electromagnetic compatibility (EMC) - Part 5: Installation and mitigation guidelines - Section 2: Earthing and cabling
IEC 61169-24:2009 Radio-frequency connectors - Part 24: Sectional specification - Radio frequency coaxial connectors with screw coupling, typically for use in 75 Ω cable networks (type F)
IEC 60364-1:2005 Low-voltage electrical installations - Part 1: Fundamental principles, assessment of general characteristics, definitions
IEC 60227-1:2007 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 1: General requirements
IEC 61169-1:2013 Radio frequency connectors - Part 1: Generic specification - General requirements and measuring methods
IEC 60874-19-1:2007 Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables - Part 19-1: Fibre optic patch cord connector type SC-PC (floating duplex) standard terminated on multimode fibre type A1a, A1b - Detail specification
CISPR 22:2008 Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement
IEC 62255-1:2003 Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 1: Generic specification
IEC 60512-25-1:2001 Connectors for electronic equipment - Tests and measurements - Part 25-1: Test 25a - Crosstalk ratio
ISO/IEC 18010:2002 Information technology Pathways and spaces for customer premises cabling
ISO/IEC 14763-1:1999 Information technology Implementation and operation of customer premises cabling Part 1: Administration
IEC 61156-2:2010 Multicore and symmetrical pair/quad cables for digital communications - Part 2: Symmetrical pair/quad cables with transmission characteristics up to 100 MHz - Horizontal floor wiring - Sectional specification
IEC 60603-7-3:2010 Connectors for electronic equipment - Part 7-3: Detail specification for 8-way, shielded, free and fixed connectors, for data transmission with frequencies up to 100 MHz
IEC 61084-1:2017 Cable trunking systems and cable ducting systems for electrical installations - Part 1: General requirements
IEC 60603-7:2008+AMD1:2011 CSV Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors
IEC 60364-4-44:2007+AMD1:2015 CSV Low-voltage electrical installations - Part 4-44: Protection for safety - Protection against voltage disturbances and electromagnetic disturbances
IEC 60512-25-2:2002 Connectors for electronic equipment - Tests and measurements - Part 25-2: Test 25b - Attenuation (insertion loss)
IEC 60966-2-5:2016 Radio frequency and coaxial cable assemblies - Part 2-5: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 1 000 MHz, IEC 61169-2 connectors
IEC 61935-1:2015 Specification for the testing of balanced and coaxial information technology cabling - Part 1: Installed balanced cabling as specified in ISO/IEC 11801 and related standards
IEC 60874-19-3:2007 Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables - Part 19-3: Fibre optic adaptor (duplex) type SC for multimode fibre connectors - Detail specification
IEC 61156-1:2007+AMD1:2009 CSV Multicore and symmetrical pair/quad cables for digital communications - Part 1: Generic specification
IEC 60512-25-5:2004 Connectors for electronic equipment - Tests and measurements - Part 25-5: Test 25e - Return loss
IEC 60966-2-4:2016 Radio frequency and coaxial cable assemblies - Part 2-4: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 3 000 MHz, IEC 61169-2 connectors
IEC 60603-8:1990 Connectors for frequencies below 3 MHz for use with printed boards. Part 8: Two-part connectors for printed boards, for basic grid of 2.54 mm (0.1 in), with square male contacts of 0.63 mm x 0.63 mm
IEC 60189-2:2007 Low-frequency cables and wires with PVC insulation and PVC sheath - Part 2: Cables in pairs, triples, quads and quintuples for inside installations
IEC 61156-7:2003+AMD1:2012 CSV Multicore and symmetrical pair/quad cables for digital communications - Part 7: Symmetrical pair cables with transmissioncharacteristics up to 1 200 MHz - Sectional specification fordigital and analog communication cables
IEC 61156-6:2010+AMD1:2012 CSV Multicore and symmetrical pair/quad cables for digital communications - Part 6: Symmetrical pair/quad cables withtransmission characteristics up to 1 000 MHz - Work area wiring -Sectional specification
IEC 61156-5:2009+AMD1:2012 CSV Multicore and symmetrical pair/quad cables for digital communications - Part 5: Symmetrical pair/quad cables withtransmission characteristics up to 1 000 MHz - Horizontal floorwiring - Sectional specification
IEC 61196-1:2005 Coaxial communication cables - Part 1: Generic specification - General, definitions and requirements
IEC 61935-2:2010 Specification for the testing of balanced and coaxial information technology cabling - Part 2: Cords as specified in ISO/IEC 11801 and related standards
IEC 61156-4:2009 Multicore and symmetrical pair/quad cables for digital communications - Part 4: Riser cables - Sectional specification
IEC 60603-7-5:2010 Connectors for electronic equipment - Part 7-5: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz
ISO/IEC TR 15044:2000 Information technology Terminology for the Home Electronic System (HES)
IEC 61156-3:2008 Multicore and symmetrical pair/quad cables for digital communications - Part 3: Work area cable - Sectional specification
IEC 61140:2016 Protection against electric shock - Common aspects for installation and equipment
IEC 60603-7-7:2010 Connectors for electronic equipment - Part 7-7: Detail specification for 8-way, shielded, free and fixed connectors for data transmission with frequencies up to 600 MHz
IEC 61076-3-104:2017 Connectors for electrical and electronic equipment - Product requirements - Part 3-104: Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 2 000 MHz
EN 50289-1-14:2004 Communication cables - Specifications for test methods - Part 1-14: Electrical test methods - Coupling attenuation or screening attenuation of connecting hardware
IEC 60728-1:2014 Cable networks for television signals, sound signals and interactive services - Part 1: System performance of forward paths
IEC 60512-3:1976 Electromechanical components for electronic equipment; basic testing procedures and measuring methods. Part 3: Current-carrying capacity tests
CISPR 24:2010+AMD1:2015 CSV Information technology equipment - Immunity characteristics - Limitsand methods of measurement
IEC 61169-2:2007 Radio-frenquency connectors - Part 2: Sectional specification - Radio frequency coaxial connectors of type 9,52
IEC TR 61000-5-1:1996 Electromagnetic compatibility (EMC) - Part 5: Installation and mitigation guidelines - Section 1: General considerations - Basic EMC publication
IEC 60364-5-52:2009 Low-voltage electrical installations - Part 5-52: Selection and erection of electrical equipment - Wiring systems
IEC 60603-7-4:2010 Connectors for electronic equipment - Part 7-4: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz

View more information
US$73.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.