• There are no items in your cart

IEC 60079-10-1:2015

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

12-31-2021

Published date

09-08-2015

FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 General
5 Area classification methodology
6 Release of flammable substance
7 Type of zone
8 Extent of zone
9 Documentation
Annex A (informative) - Suggested presentation of
        hazardous areas
Annex B (informative) - Estimation of sources of
        release
Annex C (informative) - Ventilation guidance
Annex D (informative) - Estimation of hazardous
        zones
Annex E (informative) - Examples of hazardous
        area classification
Annex F (informative) - Schematic approach to
        classification of hazardous areas
Annex G (informative) - Flammable mists
Annex H (informative) - Hydrogen
Annex I (informative) - Hybrid mixtures
Annex J (informative) - Useful equations in
        support to hazardous area classification
Annex K (informative) - Industry codes and
        national standards
Bibliography

IEC 60079-10-1:2015 is concerned with the classification of areas where flammable gas or vapour hazards may arise and may then be used as a basis to support the proper selection and installation of equipment for use in hazardous areas. It is intended to be applied where there may be an ignition hazard due to the presence of flammable gas or vapour, mixed with air, but it does not apply to:
- mines susceptible to firedamp;
- the processing and manufacture of explosives;
- catastrophic failures or rare malfunctions which are beyond the concept of abnormality dealt with in this standard (see 3.7.3 and 3.7.4);
- rooms used for medical purposes;
- commercial and industrial applications where only low pressure fuel gas is used for appliances e.g. for cooking, water heating and similar uses, where the installation is compliant with relevant gas codes;
- domestic premises;
- where a hazard may arise due to the presence of combustible dusts or combustible flyings but the principles may be used in assessment of a hybrid mixture (refer also IEC 60079-10-2). This second edition of IEC 60079-10-1 cancels and replaces the first edition, published in 2008, and constitutes a technical revision. The significant technical changes with respect to the previous edition are identified in the Foreward of the document. Keywords: ignition hazards, flammable gas or vapour, risk of explosions

Committee
TC 31/SC 31J
DevelopmentNote
Supersedes IEC 60079-10. (12/2008) Stability Date: 2020. (09/2015)
DocumentType
Standard
Pages
107
PublisherName
International Electrotechnical Committee
Status
Superseded
SupersededBy
Supersedes

UNE-EN 60079-17:2014 Explosive atmospheres - Part 17: Electrical installations inspection and maintenance
13/30287730 DC : 0 BS EN 62828 ED 1.0 - REFERENCE CONDITIONS AND PROCEDURES FOR INDUSTRIAL MEASUREMENT TRANSMITTERS - PART 1: GENERAL PROCEDURES FOR ALL TYPES OF TRANSMITTERS
10/30197483 DC : 0 BS ISO 15501-1 - ROAD VEHICLES - COMPRESSED NATURAL GAS (CNG) FUEL SYSTEMS - PART 1: SAFETY REQUIREMENTS
BS EN 60079-29-3:2014 Explosive atmospheres Gas detectors. Guidance on functional safety of fixed gas detection systems
14/30316829 DC : DRAFT NOV 2014 BS EN 62952-1 ED. 1.0 - POWER SOURCES FOR A WIRELESS COMMUNICATION DEVICE - PART 1: GENERAL REQUIREMENTS OF POWER SOURCES
NF EN 60079-13 : 2011 EXPLOSIVE ATMOSPHERES - PART 13: EQUIPMENT - PROTECTED BY PRESSURIZED ROOMS "P"
CLC/TS 62603-1:2014 Industrial process control systems - Guideline for evaluating process control systems - Part 1: Specifications
12/30262935 DC : 0 BS EN 15339-4 - THERMAL SPRAYING - SAFETY REQUIREMENTS FOR THERMAL SPRAYING EQUIPMENT - PART 4: GAS AND LIQUID FUEL SUPPLY
13/30271404 DC : DRAFT DEC 2013 BS ISO 16923 - NATURAL GAS FUELLING STATIONS - CNG STATIONS FOR FUELLING VEHICLES
UNI EN 13237 : 2012 POTENTIALLY EXPLOSIVE ATMOSPHERES - TERMS AND DEFINITIONS FOR EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES
13/30267536 DC : 0 BS EN 60079-29-1 ED 2.0 - EXPLOSIVE ATMOSPHERES - PART 29-1: GAS DETECTORS - PERFORMANCE REQUIREMENTS OF DETECTORS FOR FLAMMABLE GASES
I.S. EN 60079-0:2012 EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011 (MOD))
13/30267260 DC : 0 BS EN 62708 ED 1.0 - DOCUMENT KINDS FOR ELECTRICAL AND INSTRUMENTATION PROJECTS IN THE PROCESS INDUSTRY
ISO 16923:2016 Natural gas fuelling stations — CNG stations for fuelling vehicles
BS EN 62708:2015 Document kinds for Electrical and Instrumentation Projects in the Process Industry
BS EN ISO 20519:2017 Ships and marine technology. Specification for bunkering of liquefied natural gas fuelled vessels
11/30239006 DC : 0 BS EN 13237 - POTENTIALLY EXPLOSIVE ATMOSPHERES - TERMS AND DEFINITIONS FOR EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES
12/30260078 DC : 0 BS EN 60092-502 IEC 60092-502 - ELECTRICAL INSTALLATIONS IN SHIPS - PART 502: TANKERS - SPECIAL FEATURES
CEN/TR 15339-4:2014 Thermal spraying - Safety requirements for thermal spraying equipment - Part 4: Gas and liquid fuel supply
BS EN ISO 10439-1:2015 Petroleum, petrochemical and natural gas industries. Axial and centrifugal compressors and expander-compressors General requirements
PD ISO/TS 19883:2017 Safety of pressure swing adsorption systems for hydrogen separation and purification
API 617 : 2014 AXIAL AND CENTRIFUGAL COMPRESSORS AND EXPANDER-COMPRESSORS
14/30312016 DC : 0 BS EN ISO/IEC 60079-13 - EXPLOSIVE ATMOSPHERES - PART 13: EQUIPMENT PROTECTION BY PRESSURIZED ROOM 'P' AND ARTIFICIALLY VENTILATED ROOM 'V'
CSA C22.2 No. 60079.0 : 2015 EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS
BS EN 61285:2015 Industrial-process control. Safety of analyzer houses
IEC 60079-33:2012 Explosive atmospheres - Part 33: Equipment protection by special protection 's'
SAE J 2578 : 2014 RECOMMENDED PRACTICE FOR GENERAL FUEL CELL VEHICLE SAFETY
CEI EN 50495 : 2011 SAFETY DEVICES REQUIRED FOR THE SAFE FUNCTIONING OF EQUIPMENT WITH RESPECT TO EXPLOSION RISKS
EN ISO 16924:2018 Natural gas fuelling stations - LNG stations for fuelling vehicles (ISO 16924:2016)
DIN EN ISO 20519:2016-05 (Draft) SHIPS AND MARINE TECHNOLOGY - SPECIFICATION FOR BUNKERING OF LIQUEFIED NATURAL GAS FUELLED VESSELS (ISO 20519:2017)
ISO 15501-1:2016 Road vehicles — Compressed natural gas (CNG) fuel systems — Part 1: Safety requirements
I.S. EN 50176:2009 STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE LIQUID COATING MATERIAL - SAFETY REQUIREMENTS
ANSI FC 1 : 2012 STATIONARY FUEL CELL POWER SYSTEMS
CEI EN 61285 : 2016 INDUSTRIAL-PROCESS CONTROL - SAFETY OF ANALYZER HOUSES
CSA HPIT 2-2017 Dispensing systems and components for fueling hydrogen powered industrial trucks
S.R. CEN/TR 15339-4:2014 THERMAL SPRAYING - SAFETY REQUIREMENTS FOR THERMAL SPRAYING EQUIPMENT - PART 4: GAS AND LIQUID FUEL SUPPLY
IEC TR 61340-1:2012 Electrostatics - Part 1: Electrostatic phenomena - Principles and measurements
BS EN 61340-4-4 : 2012 ELECTROSTATICS - PART 4-4: STANDARD TEST METHODS FOR SPECIFIC APPLICATIONS - ELECTROSTATIC CLASSIFICATION OF FLEXIBLE INTERMEDIATE BULK CONTAINERS (FIBC)
I.S. EN 50174-2:2009 INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 2: INSTALLATION PLANNING AND PRACTICES INSIDE BUILDINGS
ISO/TS 19883:2017 Safety of pressure swing adsorption systems for hydrogen separation and purification
S.R. CEN/TR 16787:2014 INDUSTRIAL GAS INSTALLATION - GUIDELINE
PD CLC/TR 60079-32-1:2015 Explosive atmospheres Electrostatic hazards, guidance
EN 13617-1:2012 Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units
EN 378-3:2016 Refrigerating systems and heat pumps - Safety and environmental requirements - Part 3: Installation site and personal protection
EN ISO 80079-36:2016 Explosive atmospheres - Part 36: Non-electrical equipment for explosive atmospheres - Basic method and requirements (ISO 80079-36:2016)
BS EN ISO 80079-36:2016 Explosive atmospheres Non-electrical equipment for explosive atmospheres. Basic method and requirements
DIN EN 1473:2016-10 Installation and equipment for liquefied natural gas - Design of onshore installations
PD IEC/TR 62368-2:2015 Audio/video, information and communication technology equipment Explanatory information related to IEC 62368-1
BS EN 50174-2 : 2009 INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 2: INSTALLATION PLANNING AND PRACTICES INSIDE BUILDINGS
BS EN 60079-18 : 2015 EXPLOSIVE ATMOSPHERES - PART 18: EQUIPMENT PROTECTION BY ENCAPSULATION 'M'
16/30350625 DC : 0 BS EN 62485-5 ED 1.0 - SAFETY REQUIREMENTS FOR SECONDARY BATTERIES AND BATTERY INSTALLATIONS - PART 5: LITHIUM-ION BATTERIES FOR STATIONARY APPLICATIONS
I.S. EN 12583:2014 GAS INFRASTRUCTURE - COMPRESSOR STATIONS - FUNCTIONAL REQUIREMENTS
CLC/TR 60079-33:2015 Explosive atmospheres - Part 33: Equipment protection by special protection 's'
EN 50176:2009 Stationary electrostatic application equipment for ignitable liquid coating material - Safety requirements
EN 1010-1:2004+A1:2010 Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements
EN 13237:2012 Potentially explosive atmospheres - Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres
EN 60079-28:2015 Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation
EN IEC 62485-2:2018 Safety requirements for secondary batteries and battery installations - Part 2: Stationary batteries
EN 62708:2015 Document kinds for Electrical and Instrumentation Projects in the Process Industry
EN 60079-32-2:2015 Explosive atmospheres - Part 32-2: Electrostatics hazards - Tests
EN 50495:2010 Safety devices required for the safe functioning of equipment with respect to explosion risks
EN 62657-1:2017 Industrial communication networks - Wireless communication networks - Part 1: Wireless communication requirements and spectrum considerations
CSA HGV 4.9 : 2016 HYDROGEN FUELING STATIONS
DEFSTAN 02-357(PT4)/1(2010) : 2010 REQUIREMENTS FOR GASEOUS FIREFIGHTING SYSTEMS FOR MAIN AND AUXILIARY MACHINERY SPACES ON SURFACE SHIPS - PART 4: GENERAL REQUIREMENTS FOR INERT GAS SYSTEMS INCLUDING ELECTRIC/ELECTRONIC SPACES
DIN EN 14678-3:2013-03 LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 3: REFUELLING INSTALLATIONS AT COMMERCIAL AND INDUSTRIAL PREMISES
BS EN 16299:2013 Cathodic protection of external surfaces of above ground storage tankbases in contact with soil or foundations
UNE-EN 50495:2010 Safety devices required for the safe functioning of equipment with respect to explosion risks
10/30189547 DC : 0 BS EN 62603 ED 1 - INDUSTRIAL PROCESS CONTROL SYSTEMS - GUIDELINES FOR EVALUATING THE PERFORMANCES OF PROCESS CONTROL SYSTEMS
EN 60079-29-1:2016 Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases
I.S. EN 60079-28:2015 EXPLOSIVE ATMOSPHERES - PART 28: PROTECTION OF EQUIPMENT AND TRANSMISSION SYSTEMS USING OPTICAL RADIATION
BS EN 60079-29-2:2015 Explosive atmospheres Gas detectors. Selection, installation, use and maintenance of detectors for flammable gases and oxygen
CEN/TR 16787:2014 Industrial Gas Installation - Guideline
BS ISO 15589-1 : 2015 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - CATHODIC PROTECTION OF PIPELINE SYSTEMS - PART 1: ON-LAND PIPELINES
12/30259914 DC : 0 BS EN ISO 8311 - REFRIGERATED HYDROCARBON AND NON-PETROLEUM BASED LIQUEFIED GASEOUS FUELS - CALIBRATION OF MEMBRANE TANKS AND INDEPENDENT PRISMATIC TANKS IN SHIPS - MANUAL AND INTERNAL ELECTRO-OPTIC DISTANCE-RANGING METHODS
PD CLC/TS 62603-1:2014 Industrial process control systems. Guideline for evaluating process control systems Specifications
10/30197504 DC : 0 BS ISO 15500-6 - ROAD VEHICLES - COMPRESSED NATURAL GAS (CNG) FUEL SYSTEM COMPONENTS - PART 6: AUTOMATIC VALVE
BS ISO 14839-4:2012 Mechanical vibration. Vibration of rotating machinery equipped with active magnetic bearings Technical guidelines
BS EN 14678-3:2013 LPG equipment and accessories. Construction and performance of LPG equipment for automotive filling stations Refuelling installations at commercial and industrial premises
12/30268608 DC : 0 BS EN 60079-17/ED 5 - EXPLOSIVE ATMOSPHERES - PART 17: ELECTRICAL INSTALLATIONS INSPECTION AND MAINTENANCE
BS ISO 12619-6:2017 Road vehicles. Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blend fuel system components Automatic valve
EN 60079-13:2017 Explosive atmospheres - Part 13: Equipment protection by pressurized room "p" and artificially ventilated room "v"
BS EN 62305-3:2011 Protection against lightning Physical damage to structures and life hazard
CEI EN 50176 : 2010 STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE LIQUID COATING MATERIAL - SAFETY REQUIREMENTS
I.S. EN ISO 80079-36:2016 EXPLOSIVE ATMOSPHERES - PART 36: NON-ELECTRICAL EQUIPMENT FOR EXPLOSIVE ATMOSPHERES - BASIC METHOD AND REQUIREMENTS (ISO/DIS 80079-36:2014)
EN 50174-2 : 2009 AMD 2 2014 INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 2: INSTALLATION PLANNING AND PRACTICES INSIDE BUILDINGS
S.R. CLC/TR 60079-32-1:2015 EXPLOSIVE ATMOSPHERES - PART 32-1: ELECTROSTATIC HAZARDS - GUIDANCE
UNE-EN 60079-29-1:2017 Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases
I.S. EN IEC 61340-4-4:2018 ELECTROSTATICS - PART 4-4: STANDARD TEST METHODS FOR SPECIFIC APPLICATIONS - ELECTROSTATIC CLASSIFICATION OF FLEXIBLE INTERMEDIATE BULK CONTAINERS (FIBC)
BS EN ISO 16923:2018 Natural gas fuelling stations. CNG stations for fuelling vehicles
C22.1-15 PACKAGE Consists of C22.1-15, Canadian electrical code, part I (23rd edition), safety standard for electrical installations; C22.1HB-15, Canadian electrical code handbook - an explanation of rules of the Canadian electrical code, part I and the 2015 Electrical quick reference
I.S. EN IEC 62485-2:2018 SAFETY REQUIREMENTS FOR SECONDARY BATTERIES AND BATTERY INSTALLATIONS - PART 2: STATIONARY BATTERIES
18/30369304 DC : DRAFT APR 2018 BS EN 1473 - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS
BS EN ISO 16924:2018 Natural gas fuelling stations. LNG stations for fuelling vehicles
16/30341165 DC : 0 BS EN 14492-2 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
CEI EN 62305-3 : 2013 PROTECTION AGAINST LIGHTNING - PART 3: PHYSICAL DAMAGE TO STRUCTURES AND LIFE HAZARD
IEC TR 61831:2011 On-line analyser systems - Guide to design and installation
IEC 61936-1:2010+AMD1:2014 CSV Power installations exceeding 1 kV a.c. - Part 1: Common rules
IEC 62485-2:2010 Safety requirements for secondary batteries and battery installations - Part 2: Stationary batteries
IEC 62305-3:2010 Protection against lightning - Part 3: Physical damage to structures and life hazard
DIN EN 1010-1:2011-06 Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements (includes Amendment A1:2010)
DIN EN 13617-1:2012-08 Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units
DIN EN ISO 80079-36 E : 2016 EXPLOSIVE ATMOSPHERES - PART 36: NON-ELECTRICAL EQUIPMENT FOR EXPLOSIVE ATMOSPHERES - BASIC METHOD AND REQUIREMENTS (ISO 80079-36:2016)
ISO 80079-36:2016 Explosive atmospheres Part 36: Non-electrical equipment for explosive atmospheres Basic method and requirements
ISO 19859:2016 Gas turbine applications Requirements for power generation
BIS IS/IEC 60079-0 : 2011 EXPLOSIVE ATMOSPHERES - PART 0: GENERAL REQUIREMENTS
I.S. EN 14678-1:2013 LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS
I.S. EN 13237:2012 POTENTIALLY EXPLOSIVE ATMOSPHERES - TERMS AND DEFINITIONS FOR EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES
DIN EN 1473:1997-11 INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS
DIN EN 1127-1:2011-10 EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
DIN EN 1776:2016-05 GAS INFRASTRUCTURE - GAS MEASURING SYSTEMS - FUNCTIONAL REQUIREMENTS
Z462-18 Workplace electrical safety
DIN EN 12583:2000-11 GAS INFRASTRUCTURE - COMPRESSOR STATIONS - FUNCTIONAL REQUIREMENTS
EN 12115:2011 Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals - Specification
I.S. EN 14161:2011 PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS (ISO 13623:2009 MODIFIED)
I.S. EN 12115:2011 RUBBER AND THERMOPLASTICS HOSES AND HOSE ASSEMBLIES FOR LIQUID OR GASEOUS CHEMICALS - SPECIFICATION
I.S. EN ISO 8311:2013 REFRIGERATED HYDROCARBON AND NON-PETROLEUM BASED LIQUEFIED GASEOUS FUELS - CALIBRATION OF MEMBRANE TANKS AND INDEPENDENT PRISMATIC TANKS IN SHIPS - MANUAL AND INTERNAL ELECTRO-OPTICAL DISTANCE-RANGING METHODS (ISO 8311:2013)
I.S. EN 378-3:2016 REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 3: INSTALLATION SITE AND PERSONAL PROTECTION
I.S. EN 13617-1:2012 PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS
I.S. EN 1473:2016 INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS
EN 60079-14:2014/AC:2016 EXPLOSIVE ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS DESIGN, SELECTION AND ERECTION (IEC 60079-14:2013/COR1:2016)
C22.1HB-18 Canadian Electrical Code Handbook - An Explanation of the Rules of the Canadian Electrical Code, Part I
I.S. EN 1010-1:2005 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS
I.S. EN 1776:2015 GAS INFRASTRUCTURE - GAS MEASURING SYSTEMS - FUNCTIONAL REQUIREMENTS
VDI 4631:2011-02 Quality criteria for biogas plants
VDI 2263 Blatt 7:2010-07 Dust fires and dust explosions - Hazards - assessment - protective measures - Dust fires and explosion protection in spraying and drying integrated equipment
VDI 3802 Blatt 1:2014-09 Air conditioning systems for factories
IEC 61340-4-4 REDLINE : 3.0 ELECTROSTATICS - PART 4-4: STANDARD TEST METHODS FOR SPECIFIC APPLICATIONS - ELECTROSTATIC CLASSIFICATION OF FLEXIBLE INTERMEDIATE BULK CONTAINERS (FIBC)
DIN EN ISO 20519 E : 2017 SHIPS AND MARINE TECHNOLOGY - SPECIFICATION FOR BUNKERING OF LIQUEFIED NATURAL GAS FUELLED VESSELS (ISO 20519:2017)
PD CEN/TR 16787:2014 Industrial Gas Installation. Guideline
ISO/TS 19880-1:2016 Gaseous hydrogen Fuelling stations Part 1: General requirements
PD CEN/CLC/TR 16832:2015 Selection, use, care and maintenance of personal protective equipment for preventing electrostatic risks in hazardous areas (explosion risks)
PREN 13617-1 : DRAFT 2010 PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS
PREN 1473 : DRAFT 2018 INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS
PD CEN/TR 15339-4:2014 Thermal spraying. Safety requirements for thermal spraying equipment Gas and liquid fuel supply
NF EN 61285 : 2015 INDUSTRIAL-PROCESS CONTROL - SAFETY OF ANALYZER HOUSES
BS EN ISO 16904:2016 Petroleum and natural gas industries. Design and testing of LNG marine transfer arms for conventional onshore terminals
BS PD CEN/TR 16832 : 2015 SELECTION, USE, CARE AND MAINTENANCE OF PERSONAL PROTECTIVE EQUIPMENT FOR PREVENTING ELECTROSTATIC RISKS IN HAZARDOUS AREAS (EXPLOSION RISKS)
UNE-EN 60079-13:2011 Explosive atmospheres - Part 13: Equipment protection by pressurized room "p"
BS ISO 16924 : 2016 NATURAL GAS FUELLING STATIONS - LNG STATIONS FOR FUELLING VEHICLES
PD IEC/TS 60079-40:2015 Explosive atmospheres Requirements for process sealing between flammable process fluids and electrical systems
BS EN 60079-10-2:2015 Explosive atmospheres Classification of areas. Explosive dust atmospheres
10/30219405 DC : 0 BS EN 13617-1 - PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS
NF EN 62305-3 : 2012 PROTECTION AGAINST LIGHTNING - PART 3: PHYSICAL DAMAGE TO STRUCTURES AND LIFE HAZARD
I.S. EN ISO 15589-1:2017 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - CATHODIC PROTECTION OF PIPELINE SYSTEMS - PART 1: ON-LAND PIPELINES (ISO 15589-1:2015)
BS EN 60079-17:2014 Explosive atmospheres Electrical installations inspection and maintenance
EN 1473:2016 Installation and equipment for liquefied natural gas - Design of onshore installations
NF EN 50495 : 2010 SAFETY DEVICES REQUIRED FOR THE SAFE FUNCTIONING OF EQUIPMENT WITH RESPECT TO EXPLOSION RISKS
CEI EN 60079-17 : 2015 EXPLOSIVE ATMOSPHERES - PART 17: ELECTRICAL INSTALLATIONS INSPECTION AND MAINTENANCE
CEI EN 50050-1 : 2014 ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 1: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE LIQUID COATING MATERIALS
UNE-EN 50176:2010 Stationary electrostatic application equipment for ignitable liquid coating material - Safety requirements
UNE-EN ISO 16904:2016 Petroleum and natural gas industries - Design and testing of LNG marine transfer arms for conventional onshore terminals (ISO 16904:2016)
14/30310243 DC : 0 BS EN 60079-40 - EXPLOSIVE ATMOSPHERES - REQUIREMENTS FOR PROCESS SEALING BETWEEN FLAMMABLE OR COMBUSTIBLE PROCESS FLUIDS AND ELECTRICAL SYSTEMS
UNE-EN 60079-10-2:2016 Explosive atmospheres - Part 10-2: Classification of areas - Explosive dust atmospheres
CSA C22.2 No. 60079-28 : 2016 EXPLOSIVE ATMOSPHERES - PART 28: PROTECTION OF EQUIPMENT AND TRANSMISSION SYSTEMS USING OPTICAL RADIATION
IEC 60079-10-2:2015 RLV Explosive atmospheres - Part 10-2: Classification of areas - Explosive dust atmospheres
I.S. EN 50628:2016 ERECTION OF ELECTRICAL INSTALLATIONS IN UNDERGROUND MINES
CSA B108 : 2014 COMPRESSED NATURAL GAS FUELLING STATIONS INSTALLATION CODE
I.S. EN 50050-1:2013 ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 1: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE LIQUID COATING MATERIALS
I.S. EN 60079-29-2:2015 EXPLOSIVE ATMOSPHERES - PART 29-2: GAS DETECTORS - SELECTION, INSTALLATION, USE AND MAINTENANCE OF DETECTORS FOR FLAMMABLE GASES AND OXYGEN
S.R. CEN/CLC/TR 16832:2015&LC:2015 SELECTION, USE, CARE AND MAINTENANCE OF PERSONAL PROTECTIVE EQUIPMENT FOR PREVENTING ELECTROSTATIC RISKS IN HAZARDOUS AREAS (EXPLOSION RISKS)
I.S. EN 62708:2015 DOCUMENT KINDS FOR ELECTRICAL AND INSTRUMENTATION PROJECTS IN THE PROCESS INDUSTRY
I.S. EN 62305-3:2011 PROTECTION AGAINST LIGHTNING - PART 3: PHYSICAL DAMAGE TO STRUCTURES AND LIFE HAZARD
I.S. EN 60079-17:2014 EXPLOSIVE ATMOSPHERES - PART 17: ELECTRICAL INSTALLATIONS INSPECTION AND MAINTENANCE
BS EN 60079-29-1:2007 Explosive atmospheres Gas detectors. Performance requirements of detectors for flammable gases
I.S. EN 62305-2:2012 PROTECTION AGAINST LIGHTNING - PART 2: RISK MANAGEMENT (IEC 62305-2:2010 (MOD))
UNE-EN 62305-3:2011 Protection against lightning -- Part 3: Physical damages to structures and life hazard
I.S. EN ISO 10439-1:2015 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - AXIAL AND CENTRIFUGAL COMPRESSORS AND EXPANDER-COMPRESSORS - PART 1: GENERAL REQUIREMENTS (ISO 10439-1:2015)
CEN/CLC/TR 16832:2015 Selection, use, care and maintenance of personal protective equipment for preventing electrostatic risks in hazardous areas (explosion risks)
PREN 12954 : DRAFT 2017 GENERAL PRINCIPLES OF CATHODIC PROTECTION OF BURIED OR IMMERSED ONSHORE METALLIC STRUCTURES
I.S. EN 60079-32-2:2015 EXPLOSIVE ATMOSPHERES - PART 32-2: ELECTROSTATICS HAZARDS - TESTS
ISO 12619-6:2017 Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 6: Automatic valve
I.S. EN 60079-14:2014 EXPLOSIVE ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS DESIGN, SELECTION AND ERECTION
UNI EN 14678-3 : 2013 LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 3: REFUELLING INSTALLATIONS AT COMMERCIAL AND INDUSTRIAL PREMISES
EN IEC 61340-4-4:2018 Electrostatics - Part 4-4: Standard test methods for specific applications - Electrostatic classification of flexible intermediate bulk containers (FIBC)
IEC 60079-0:2017 Explosive atmospheres - Part 0: Equipment - General requirements
BS EN 1127-1:2019 Explosive atmospheres. Explosion prevention and protection Basic concepts and methodology
UNI EN 16299 : 2013 CATHODIC PROTECTION OF EXTERNAL SURFACES OF ABOVE GROUND STORAGE TANK BASES IN CONTACT WITH SOIL OR FOUNDATIONS
EN 61936-1 : 2010 AMD 1 2014 POWER INSTALLATIONS EXCEEDING 1 KV A.C. - PART 1: COMMON RULES (IEC 61936-1:2010/A1:2014)
IEC 62305-2:2010 Protection against lightning - Part 2: Risk management
ISO 12643-1:2009 Graphic technology — Safety requirements for graphic technology equipment and systems — Part 1: General requirements
I.S. EN 61340-4-4:2012 ELECTROSTATICS - PART 4-4: STANDARD TEST METHODS FOR SPECIFIC APPLICATIONS - ELECTROSTATIC CLASSIFICATION OF FLEXIBLE INTERMEDIATE BULK CONTAINERS (FIBC) (IEC 61340-4-4:2012 (EQV))
IEC 60079-29-2 REDLINE : 2ED 2015 EXPLOSIVE ATMOSPHERES - PART 29-2: GAS DETECTORS - SELECTION, INSTALLATION, USE AND MAINTENANCE OF DETECTORS FOR FLAMMABLE GASES AND OXYGEN
I.S. EN 1127-1:2011 EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
IEC 60079-18:2014 RLV Explosive atmospheres - Part 18: Equipment protection by encapsulation “m”
EEMUA 186 : 2016 A PRACTITIONER'S HANDBOOK FOR POTENTIALLY EXPLOSIVE ATMOSPHERES
DIN EN 12583:2014-07 GAS INFRASTRUCTURE - COMPRESSOR STATIONS - FUNCTIONAL REQUIREMENTS
DIN EN 12115:2011-04 Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals - Specification; German version EN 12115:2011
UNE-EN 60079-14:2016 Explosive atmospheres - Part 14: Electrical installations design, selection and erection
BS EN 1010-1 : 2004 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS
BS EN 1473:2016 Installation and equipment for liquefied natural gas. Design of onshore installations
UNE-EN 14678-1:2013 LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers
ISO 16904:2016 Petroleum and natural gas industries Design and testing of LNG marine transfer arms for conventional onshore terminals
UNE-EN 378-3:2017 Refrigerating systems and heat pumps - Safety and environmental requirements - Part 3: Installation site and personal protection
BS EN 60079-14:2014 Explosive atmospheres Electrical installations design, selection and erection
UNI EN 13617-1 : 2012 PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS
EN ISO 15589-1:2017 Petroleum, petrochemical and natural gas industries - Cathodic protection of pipeline systems - Part 1: On-land pipelines (ISO 15589-1:2015, Corrected version 2020-11)
EN 16299:2013 Cathodic protection of external surfaces of above ground storage tank bases in contact with soil or foundations
EN 14678-1:2013 LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers
UNI EN 1010-1 : 2011 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS
UNI EN ISO 8311 : 2014 REFRIGERATED HYDROCARBON AND NON-PETROLEUM BASED LIQUEFIED GASEOUS FUELS - CALIBRATION OF MEMBRANE TANKS AND INDEPENDENT PRISMATIC TANKS IN SHIPS - MANUAL AND INTERNAL ELECTRO-OPTICAL DISTANCE-RANGING METHODS
UNI EN 14678-1 : 2013 LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS
CSA CE CODE SAFETY PACKAGE : 2012 CE CODE SAFETY PACKAGE
UNI EN 12583 : 2014 GAS INFRASTRUCTURE - COMPRESSOR STATIONS - FUNCTIONAL REQUIREMENTS
BS EN 50176:2009 Stationary electrostatic application equipment for ignitable liquid coating material. Safety requirements
13/30271477 DC : 0 BS EN 61285 ED 3.0 - INDUSTRIAL-PROCESS CONTROL - SAFETY OF ANALYSER HOUSES
12/30258747 DC : DRAFT MAR 2012 BS EN 12583 - GAS INFRASTRUCTURE - COMPRESSOR STATIONS - FUNCTIONAL REQUIREMENTS
10/30231432 DC : 0 BS EN ISO 10439-1 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - AXIAL AND CENTRIFUGAL COMPRESSORS AND EXPANDER-COMPRESSORS - PART 1: GENERAL REQUIREMENTS
BS EN 60079-32-2:2015 Explosive atmospheres Electrostatics hazards. Tests
I.S. EN 16299:2013 CATHODIC PROTECTION OF EXTERNAL SURFACES OF ABOVE GROUND STORAGE TANK BASES IN CONTACT WITH SOIL OR FOUNDATIONS
ISO 15500-6:2012 Road vehicles Compressed natural gas (CNG) fuel system components Part 6: Automatic valve
CEN/TR 15339-3:2014 Thermal spraying - Safety requirements for thermal spraying equipment - Part 3: Torches for thermal spraying and their connection and supply units
PREN 15001-2 : DRAFT 2017 GAS SUPPLY SYSTEMS - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 2: DETAILED FUNCTIONAL REQUIREMENTS FOR COMMISSIONING, OPERATION AND MAINTENANCE
PD CEN/TR 15339-3:2014 Thermal spraying. Safety requirements for thermal spraying equipment Torches for thermal spraying and their connection and supply units
PD ISO/TS 18683:2015 Guidelines for systems and installations for supply of LNG as fuel to ships
BS EN 60079-13:2017 Explosive atmospheres Equipment protection by pressurized room \'p\' and artificially ventilated room \'v\'
12/30239867 DC : 0 BS EN 62368-1 - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS
PD IEC/TR 61831:2011 On-line analyser systems. Guide to design and installation
14/30267384 DC : 0 BS EN 60079-30-1 ED 1.0 - EXPLOSIVE ATMOSPHERES - PART 30-1: ELECTRICAL RESISTANCE TRACE HEATING - GENERAL; TYPE TESTING AND DESIGN REQUIREMENTS
15/30323973 DC : 0 BS ISO 15501-1 - ROAD VEHICLES - COMPRESSED NATURAL GAS (CNG) FUEL SYSTEMS - PART 1: SAFETY REQUIREMENTS
12/30247700 DC : 0 BS EN 60079-29-3 IEC 60079-29-3 ED. 1.0 - EXPLOSIVE ATMOSPHERES - PART 29-3: GAS DETECTORS GUIDANCE ON FUNCTIONAL SAFETY OF FIXED GAS DETECTION SYSTEMS
BS ISO 12643-1:2009 Graphic technology. Safety requirements for graphic technology equipment and systems General requirements
S.R. CLC/TS 62603-1:2014 INDUSTRIAL PROCESS CONTROL SYSTEMS - GUIDELINE FOR EVALUATING PROCESS CONTROL SYSTEMS - PART 1: SPECIFICATIONS
15/30324828 DC BS EN 62305-3. Protection against lightning. Part 3. Physical damage to structures and life hazard
CEN/TR 16832 : 2015 COR 2015 SELECTION, USE, CARE AND MAINTENANCE OF PERSONAL PROTECTIVE EQUIPMENT FOR PREVENTING ELECTROSTATIC RISKS IN HAZARDOUS AREAS (EXPLOSION RISKS)
CEI EN 62305-2 : 2013 PROTECTION AGAINST LIGHTNING - PART 2: RISK MANAGEMENT
PD IEC/TS 60079-46:2017 Explosive atmospheres Equipment assemblies
BS EN 50495:2010 Safety devices required for the safe functioning of equipment with respect to explosion risks
13/30278077 DC : 0 BS EN ISO 16904 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND TESTING OF LNG MARINE TRANSFER ARMS FOR CONVENTIONAL ONSHORE TERMINALS
BS PD IEC/TS 62603-1 : 2014 INDUSTRIAL PROCESS CONTROL SYSTEMS - GUIDELINES FOR PROCESS CONTROL SYSTEMS - PART 1: SPECIFICATIONS
12/30258453 DC : 0 BS EN 62368-1 AMD - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS
ISO 14839-4:2012 Mechanical vibration — Vibration of rotating machinery equipped with active magnetic bearings — Part 4: Technical guidelines
UNE-EN ISO 20519:2017 Ships and marine technology - Specification for bunkering of liquefied natural gas fuelled vessels (ISO 20519:2017)
UNI EN 1127-1 : 2011 EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
UNE-EN 16299:2013 Cathodic protection of external surfaces of above ground storage tank bases in contact with soil or foundations
I.S. EN 61285:2015 INDUSTRIAL-PROCESS CONTROL - SAFETY OF ANALYZER HOUSES
CSA C22.2 NO. 60079-29-1:17 EXPLOSIVE ATMOSPHERES - PART 29-1: GAS DETECTORS - PERFORMANCE REQUIREMENTS OF DETECTORS FOR FLAMMABLE GASES
I.S. EN ISO 16924:2018 NATURAL GAS FUELLING STATIONS - LNG STATIONS FOR FUELLING VEHICLES (ISO 16924:2016)
CSA C22.2 No. 60079-18 : 2016 EXPLOSIVE ATMOSPHERES - PART 18: EQUIPMENT PROTECTION BY ENCAPSULATION 'M'
BS PD IEC TS 60079-32-1 : 2013 EXPLOSIVE ATMOSPHERES - PART 32-1: ELECTROSTATIC HAZARDS, GUIDANCE
ISO 15589-1:2015 Petroleum, petrochemical and natural gas industries — Cathodic protection of pipeline systems — Part 1: On-land pipelines
17/30346281 DC : 0 BS EN 12954 - GENERAL PRINCIPLES OF CATHODIC PROTECTION OF BURIED OR IMMERSED ONSHORE METALLIC STRUCTURES
CEI EN 60079-29-2 : 2016 EXPLOSIVE ATMOSPHERES - PART 29-2: GAS DETECTORS - SELECTION, INSTALLATION, USE AND MAINTENANCE OF DETECTORS FOR FLAMMABLE GASES AND OXYGEN
I.S. EN ISO 20519:2017 SHIPS AND MARINE TECHNOLOGY - SPECIFICATION FOR BUNKERING OF LIQUEFIED NATURAL GAS FUELLED VESSELS (ISO 20519:2017)
UNE-EN 50050-1:2014 Electrostatic hand-held spraying equipment - Safety requirements - Part 1: Hand-held spraying equipment for ignitable liquid coating materials
I.S. EN 61936-1:2010 POWER INSTALLATIONS EXCEEDING 1 KV A.C. - PART 1: COMMON RULES
IEC TS 61936-2:2015 Power installations exceeding 1 kV a.c. and 1,5 kV d.c. - Part 2: d.c.
IEC TS 60079-40:2015 Explosive atmospheres - Part 40: Requirements for process sealing between flammable process fluids and electrical systems
IEC 60079-13:2017 Explosive atmospheres - Part 13: Equipment protection by pressurized room "p" and artificially ventilated room "v"
IEC 62657-1:2017 Industrial communication networks - Wireless communication networks - Part 1: Wireless communication requirements and spectrum considerations
IEC 61892-7:2014 Mobile and fixed offshore units - Electrical installations - Part 7: Hazardous areas
BS EN 50628:2016 Erection of electrical installations in underground mines
BS EN ISO 8311:2013 Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels. Calibration of membrane tanks and independent prismatic tanks in ships. Manual and internal electro-optical distance-ranging methods
13/30276640 DC : 0 BS EN 62282-4-101 ED 1.0 - FUEL CELL TECHNOLOGIES - PART 4-101: FUEL CELL POWER SYSTEMS FOR PROPULSION FOR OTHER THAN ROAD VEHICLES AND AUXILIARY POWER UNITS - FUEL CELL POWER SYSTEMS FOR ELECTRICALLY POWERED INDUSTRIAL TRUCKS - SAFETY
BS EN 12583:2014 Gas Infrastructure. Compressor stations. Functional requirements
ISO 8311:2013 Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels — Calibration of membrane tanks and independent prismatic tanks in ships — Manual and internal electro-optical distance-ranging methods
IEC 60079-0:2017 RLV Explosive atmospheres - Part 0: Equipment - General requirements
UNE-EN 1776:2017 Gas infrastructure - Gas measuring systems - Functional requirements
BS EN 62282-4-101:2014 Fuel cell technologies Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU). Safety of electrically powered industrial trucks
BS EN 13617-1:2012 Petrol filling stations Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units
BS EN 12115:2011 Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals. Specification
UNE-EN 60079-0:2013 Explosive atmospheres - Part 0: Equipment - General requirements
12/30276304 DC : 0 BS EN 61892-7 ED 3.0 - MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 7: HAZARDOUS AREAS
BS EN 1776:2015 Gas infrastructure. Gas measuring systems. Functional requirements
IEC 60079-29-3:2014 Explosive atmospheres - Part 29-3: Gas detectors - Guidance on functional safety of fixed gas detection systems
IEC 62282-4-101:2014 Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industrial trucks
11/30211394 DC : DRAFT MAR 2011 BS ISO 20100 - GASEOUS HYDROGEN - FUELLING STATIONS
BS EN 13237:2012 Potentially explosive atmospheres. Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres
PD IEC/TS 61936-2:2015 Power installations exceeding 1 kV a.c. and 1,5 kV d.c. d.c.
UNE-EN 12583:2014 Gas Infrastructure - Compressor stations - Functional requirements
BS ISO 19859:2016 Gas turbine applications. Requirements for power generation
ISO 20519:2017 Ships and marine technology Specification for bunkering of liquefied natural gas fuelled vessels
UNE-EN 13617-1:2012 Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units
IEC 60079-29-2:2015 RLV Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen
ISO 22734-2:2011 Hydrogen generators using water electrolysis process Part 2: Residential applications
ISO 10439-1:2015 Petroleum, petrochemical and natural gas industries Axial and centrifugal compressors and expander-compressors Part 1: General requirements
PD CLC/TR 60079-33:2015 Explosive atmospheres Equipment protection by special protection \'s\'
IEC TR 62368-2:2015 Audio/video, information and communication technology equipment - Part 2: Explanatory information related to IEC 62368-1
BS EN 61936-1 : 2010 POWER INSTALLATIONS EXCEEDING 1 KV A.C - PART 1: COMMON RULES
BS EN 378-3:2016 Refrigerating systems and heat pumps. Safety and environmental requirements Installation site and personal protection
16/30332627 DC : 0 BS EN 62932-2-2 ED 1.0 - FLOW BATTERY SYSTEMS FOR STATIONARY APPLICATIONS - PART 2-2: SAFETY REQUIREMENTS
BS IEC 60079-33 : 2012 EXPLOSIVE ATMOSPHERES - PART 33: EQUIPMENT PROTECTION BY SPECIAL PROTECTION 'S'
UNE-EN 61936-1:2012 Power installations exceeding 1 kV a.c. -- Part 1: Common rules
13/30271432 DC : 0 BS EN 60079-18 ED 4.0 - EXPLOSIVE ATMOSPHERES - PART 18: EQUIPMENT PROTECTION BY ENCAPSULATION 'M'
09/30150663 DC : 0 BS ISO 22734-2 - HYDROGEN GENERATORS USING WATER ELECTROLYSIS PROCESS - PART 2: RESIDENTIAL APPLICATIONS
BS EN 14161 : 2011 PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS (ISO 13623:2009 MODIFIED)
BS ISO 22734-2:2011 Hydrogen generators using water electrolysis process Residential applications
IEC 61285:2015 Industrial-process control - Safety of analyser houses
DIN EN ISO 80079-36:2016-12 Explosive atmospheres - Part 36: Non-electrical equipment for explosive atmospheres - Basic method and requirements (ISO 80079-36:2016)
EI RR. AVIATION FUEL. HAZA. AREA CLASS. : 2017 EI RESEARCH REPORT - AVIATION FUELLING HAZARDOUS AREA CLASSIFICATION
EN ISO 8311:2013 Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels - Calibration of membrane tanks and independent prismatic tanks in ships - Manual and internal electro-optical distance-ranging methods (ISO 8311:2013)
EN ISO 20519:2017 Ships and marine technology - Specification for bunkering of liquefied natural gas fuelled vessels (ISO 20519:2017)
EN ISO 16923:2018 Natural gas fuelling stations - CNG stations for fuelling vehicles (ISO 16923:2016)
EN 1776:2015 Gas infrastructure - Gas measuring systems - Functional requirements
EN ISO 16904:2016 Petroleum and natural gas industries - Design and testing of LNG marine transfer arms for conventional onshore terminals (ISO 16904:2016)
EN ISO 10439-1:2015 Petroleum, petrochemical and natural gas industries - Axial and centrifugal compressors and expander-compressors - Part 1: General requirements (ISO 10439-1:2015)
EN 14161:2011+A1:2015 Petroleum and natural gas industries - Pipeline transportation systems (ISO 13623:2009 modified)
EN 14678-3:2013 LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 3: Refuelling installations at commercial and industrial premises
10/30216936 DC : 0 BS EN 61340-4-4 - ELECTROSTATICS - PART 4-4: STANDARD TEST METHODS FOR SPECIFIC APPLICATIONS - ELECTROSTATIC CLASSIFICATION OF FLEXIBLE INTERMEDIATE BULK CONTAINERS (FIBC)
UNE-EN 60079-28:2016 Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation
BS ISO 15500-6 : 2012 ROAD VEHICLES - COMPRESSED NATURAL GAS (CNG) FUEL SYSTEM COMPONENTS - PART 6: AUTOMATIC VALVE
BS EN 50050-1:2013 Electrostatic hand-held spraying equipment. Safety requirements Hand-held spraying equipment for ignitable liquid coating materials
ISO 16924:2016 Natural gas fuelling stations — LNG stations for fuelling vehicles
10/30227442 DC : 0 BS EN ISO 13710 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - RECIPROCATING POSITIVE DISPLACEMENT PUMPS
10/30187796 DC : DRAFT DEC 2010 BS EN 14161 - PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS
DIN EN 14161:2015-07 ABSCHLUESSE AUSSEN UND AUSSENJALOUSIEN - LEISTUNGS- UND SICHERHEITSANFORDERUNGEN
BS ISO 16923 : 2016 NATURAL GAS FUELLING STATIONS - CNG STATIONS FOR FUELLING VEHICLES
BS EN 62305-2:2012 Protection against lightning Risk management
S.R. CLC/TR 60079-33:2015 EXPLOSIVE ATMOSPHERES - PART 33: EQUIPMENT PROTECTION BY SPECIAL PROTECTION 'S'
UNE-EN 14678-3:2013 LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 3: Refuelling installations at commercial and industrial premises
I.S. EN 60079-29-3:2014 EXPLOSIVE ATMOSPHERES - PART 29-3: GAS DETECTORS - GUIDANCE ON FUNCTIONAL SAFETY OF FIXED GAS DETECTION SYSTEMS
BS ISO 15501-1:2016 Road vehicles. Compressed natural gas (CNG) fuel systems Safety requirements
BS EN 60079-28:2015 Explosive atmospheres Protection of equipment and transmission systems using optical radiation
I.S. EN 14678-3:2013 LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 3: REFUELLING INSTALLATIONS AT COMMERCIAL AND INDUSTRIAL PREMISES
CEI EN 60079-13 : 2011 EXPLOSIVE ATMOSPHERES - PART 13: EQUIPMENT PROTECTION BY PRESSURIZED ROOMS 'P'
I.S. EN 60079-10-2:2015 EXPLOSIVE ATMOSPHERES - PART 10-2: CLASSIFICATION OF AREAS - EXPLOSIVE DUST ATMOSPHERES
I.S. EN 60079-29-1:2016 EXPLOSIVE ATMOSPHERES - PART 29-1: GAS DETECTORS - PERFORMANCE REQUIREMENTS OF DETECTORS FOR FLAMMABLE GASES
I.S. EN ISO 16904:2016 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND TESTING OF LNG MARINE TRANSFER ARMS FOR CONVENTIONAL ONSHORE TERMINALS (ISO 16904:2016)
UNE-EN 60079-29-2:2016 Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen
BS EN 62657-1:2017 Industrial communication networks. Wireless communication networks Wireless communication requirements and spectrum considerations
IEC 61340-4-4:2018 Electrostatics - Part 4-4: Standard test methods for specific applications - Electrostatic classification of flexible intermediate bulk containers (FIBC)
I.S. EN 62657-1:2017 INDUSTRIAL COMMUNICATION NETWORKS - WIRELESS COMMUNICATION NETWORKS - PART 1: WIRELESS COMMUNICATION REQUIREMENTS AND SPECTRUM CONSIDERATIONS
I.S. EN ISO 16923:2018 NATURAL GAS FUELLING STATIONS - CNG STATIONS FOR FUELLING VEHICLES (ISO 16923:2016)
I.S. EN 50495:2010 SAFETY DEVICES REQUIRED FOR THE SAFE FUNCTIONING OF EQUIPMENT WITH RESPECT TO EXPLOSION RISKS
EN 60079-18:2015/A1:2017 EXPLOSIVE ATMOSPHERES - PART 18: EQUIPMENT PROTECTION BY ENCAPSULATION 'M' (IEC 60079-18:2014/A1:2017)
BS EN 60079-0 : 2012 EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS
IEC TS 60079-46:2017 Explosive atmospheres - Part 46: Equipment assemblies
I.S. EN 60079-18:2015 EXPLOSIVE ATMOSPHERES - PART 18: EQUIPMENT PROTECTION BY ENCAPSULATION 'M'
BS EN ISO 15589-1:2017 Petroleum, petrochemical and natural gas industries. Cathodic protection of pipeline systems On-land pipelines
S.R. CEN/TR 15339-3:2014 THERMAL SPRAYING - SAFETY REQUIREMENTS FOR THERMAL SPRAYING EQUIPMENT - PART 3: TORCHES FOR THERMAL SPRAYING AND THEIR CONNECTION AND SUPPLY UNITS
BS EN 1127-1:2011 Explosive atmospheres. Explosion prevention and protection Basic concepts and methodology
CLC/TR 60079-32-1:2015 Explosive atmospheres - Part 32-1: Electrostatic Hazards - Guidance
ISO/TS 18683:2015 Guidelines for systems and installations for supply of LNG as fuel to ships
IEC 60079-18 : 2014 REDLINE EXPLOSIVE ATMOSPHERES - PART 18: EQUIPMENT PROTECTION BY ENCAPSULATION 'M'
IEC 60079-0 REDLINE : 7.0 EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS
IEC 60079-10-2 REDLINE : 2ED 2015 EXPLOSIVE ATMOSPHERES - PART 10-2: CLASSIFICATION OF AREAS - EXPLOSIVE DUST ATMOSPHERES
I.S. EN 60079-13:2017 EXPLOSIVE ATMOSPHERES - PART 13: EQUIPMENT PROTECTION BY PRESSURIZED ROOM 'P' AND ARTIFICIALLY VENTILATED ROOM 'V'
IEC TS 62603-1:2014 Industrial process control systems - Guideline for evaluating process control systems - Part 1: Specifications
EN 61340-4-4:2012/A1:2015 ELECTROSTATICS - PART 4-4: STANDARD TEST METHODS FOR SPECIFIC APPLICATIONS - ELECTROSTATIC CLASSIFICATION OF FLEXIBLE INTERMEDIATE BULK CONTAINERS (FIBC) (IEC 61340-4-4:2012)
DIN EN 14678-1:2013-06 LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers
DIN EN 13237:2013-01 POTENTIALLY EXPLOSIVE ATMOSPHERES - TERMS AND DEFINITIONS FOR EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES
C22.1-18 Canadian Electrical Code, Part I (24th Edition), Safety Standard for Electrical Installations
UNE-EN 60079-32-2:2016 Explosive atmospheres - Part 32-2: Electrostatics hazards - Tests
IEC 60079-17:2013 Explosive atmospheres - Part 17: Electrical installations inspection and maintenance
12/30269297 DC : 0 BS EN 60079-14/ED 5 - EXPLOSIVE ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS DESIGN, SELECTION AND ERECTION
BS EN 14678-1:2013 LPG equipment and accessories. Construction and performance of LPG equipment for automotive filling stations Dispensers
14/30244780 DC : 0 BS ISO 19859 - GAS TURBINE APPLICATIONS - REQUIREMENTS FOR POWER GENERATION
BS IEC 61892-7:2014 Mobile and fixed offshore units. Electrical installations Hazardous areas
IEC 62708:2015 Documents kinds for electrical and instrumentation projects in the process industry
EN 60079-0:2012/A11:2013 EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED)
EN 60079-29-3:2014 Explosive atmospheres - Part 29-3: Gas detectors - Guidance on functional safety of fixed gas detection systems
EN 12583:2014 Gas Infrastructure - Compressor stations - Functional requirements
UNI EN 12115 : 2011 RUBBER AND THERMOPLASTICS HOSES AND HOSE ASSEMBLIES FOR LIQUID OR GASEOUS CHEMICALS - SPECIFICATION
EN 62305-2:2012 Protection against lightning - Part 2: Risk management
EN 60079-17:2014 Explosive atmospheres - Part 17: Electrical installations inspection and maintenance
DIN EN ISO 20519:2017-06 Ships and marine technology - Specification for bunkering of liquefied natural gas fuelled vessels (ISO 20519:2017)
EN 1127-1:2011 Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology
DIN EN ISO 8311:2014-03 REFRIGERATED HYDROCARBON AND NON-PETROLEUM BASED LIQUEFIED GASEOUS FUELS - CALIBRATION OF MEMBRANE TANKS AND INDEPENDENT PRISMATIC TANKS IN SHIPS - MANUAL AND INTERNAL ELECTRO-OPTICAL DISTANCE-RANGING METHODS (ISO 8311:2013)
EN 50628:2016 Erection of electrical installations in underground mines
DIN EN 16299:2013-06 CATHODIC PROTECTION OF EXTERNAL SURFACES OF ABOVE GROUND STORAGE TANK BASES IN CONTACT WITH SOIL OR FOUNDATIONS
EN 60079-29-2:2015 Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen
IEC 61340-4-4:2018 RLV Electrostatics - Part 4-4: Standard test methods for specific applications - Electrostatic classification of flexible intermediate bulk containers (FIBC)
EN 62282-4-101:2014 Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industrial trucks
EN 61285:2015 Industrial-process control - Safety of analyzer houses
EN 62305-3:2011 Protection against lightning - Part 3: Physical damage to structures and life hazard
EN 60079-10-2:2015 Explosive atmospheres - Part 10-2: Classification of areas - Explosive dust atmospheres
EN 50050-1:2013 Electrostatic hand-held spraying equipment - Safety requirements - Part 1: Hand-held spraying equipment for ignitable liquid coating materials

IEC 60079-20-1:2010 Explosive atmospheres - Part 20-1: Material characteristics for gas and vapour classification - Test methods and data
AS 62282.3.300:2021 Fuel cell technologies Stationary fuel cell power systems - Installation (IEC 62282-3-300:2012 (ED.1.0), MOD)
IEC 60079-0:2011 Explosive atmospheres - Part 0: Equipment - General requirements
IEC 61285:2015 Industrial-process control - Safety of analyser houses

View more information
US$435.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.