• MIL HDBK 454 : B

    Current The latest, up-to-date edition.
    Add to Watchlist
    This Standard has been added successfully to your Watchlist.
    Please visit My Watchlist to see all standards that you are watching.
    Please log in or to add this standard to your Watchlist.
    We could not add this standard to your Watchlist.
    Please retry or contact support for assistance.
    We could not add this standard to your Watchlist.
    Please retry or contact support for assistance.
    You have already added this standard to your Watchlist.
    Visit My Watchlist to view the full list.

    GENERAL GUIDELINES FOR ELECTRONIC EQUIPMENT

    Available format(s):  Hardcopy, PDF

    Language(s): 

    Published date:  11-03-2000

    Publisher:  US Military Specs/Standards/Handbooks

    Add to Watchlist

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    FOREWORD
    1 SCOPE
      1.1 Guidelines applicable to electronic
          equipment
      1.2 Revision of guidelines
          1.2.1 Redating
      1.3 Method of reference
      1.4 Interrelationship of guidelines
    2 APPLICABLE DOCUMENTS
      2.1 Individual guidelines
      2.2 Industry addresses
    3 DEFINITIONS
      3.1 Airborne, space, aerospace
      3.2 Other terms are defined in the individual
          guidelines
    4 GENERAL GUIDELINES
      4.1 Application
      4.2 Use of selection and application standards
    5 DETAIL GUIDELINES
      5.1 Individual guidelines for electronic equipment
    6 NOTES
      6.1 Subject term (key word) listing
      6.2 Changes from previous issue
    INDIVIDUAL GUIDELINES
    Guideline 1 Safety Design Criteria - Personnel
                 Hazards
    Guideline 2 Capacitors
    Guideline 3 Flammability
    Guideline 4 Fungus Inert Materials
    Guideline 5 Soldering
    Guideline 6 Bearings
    Guideline 7 Interchangeability
    Guideline 8 Electrical Overload Protection
    Guideline 9 Workmanship
    Guideline 10 Electrical Connectors
    Guideline 11 Insulating Materials, Electrical
    Guideline 12 Fastener Hardware
    Guideline 13 Structural Welding
    Guideline 14 Transformers, Inductors, and Coils
    Guideline 15 Metals, Corrosion Resistance
    Guideline 16 Dissimilar Metals
    Guideline 17 Printed Wiring
    Guideline 18 Derating of Electronic Parts and
                 Materials
    Guideline 19 Terminations
    Guideline 20 Wire, Hookup, Internal
    Guideline 21 Castings
    Guideline 22 Parts Management
    Guideline 23 Adhesives
    Guideline 24 Welds, Resistance, Electrical
                 Interconnections
    Guideline 25 Electrical Power
    Guideline 26 Arc-Resistant Materials
    Guideline 27 Batteries
    Guideline 28 Controls
    Guideline 29 Electron Tubes
    Guideline 30 Semiconductor Devices
    Guideline 31 Moisture Pockets
    Guideline 32 Test Provisions
    Guideline 33 Resistors
    Guideline 34 Nomenclature
    Guideline 35 Reliability
    Guideline 36 Accessibility
    Guideline 37 Circuit Breakers
    Guideline 38 Quartz Crystals and Oscillator Units
    Guideline 39 Fuses and Fuse Holders
    Guideline 40 Shunts
    Guideline 41 Springs
    Guideline 42 Tuning Dial Mechanisms
    Guideline 43 Lubricants
    Guideline 44 Fibrous Materials, Organic
    Guideline 45 Corona and Electrical Breakdown Prevention
    Guideline 46 Motors and Rotary Power Converters
    Guideline 47 Encapsulation and Embedment (Potting)
    Guideline 48 Gears
    Guideline 49 Hydraulics
    Guideline 50 Indicator Lights
    Guideline 51 Meters, Electrical Indicating
    Guideline 52 Thermal Design
    Guideline 53 Waveguides and Related Devices
    Guideline 54 Maintainability
    Guideline 55 Enclosures
    Guideline 56 Rotary Servo Devices
    Guideline 57 Relays
    Guideline 58 Switches
    Guideline 59 Brazing
    Guideline 60 Sockets and Accessories
    Guideline 61 Electromagnetic Interference Control
    Guideline 62 Human Engineering
    Guideline 63 Special Tools
    Guideline 64 Microelectronic Devices
    Guideline 65 Cable, Coaxial (RF)
    Guideline 66 Cable, Multiconductor
    Guideline 67 Marking
    Guideline 68 Readouts and Displays
    Guideline 69 Internal Wiring Practices
    Guideline 70 Electrical Filters
    Guideline 71 Cable and Wire, Interconnection
    Guideline 72 Substitutability
    Guideline 73 Standard Electronic Modules
    Guideline 74 Grounding, Bonding, and Shielding
    Guideline 75 Electrostatic Discharge Control
    Guideline 76 Fiber Optics
    Guideline 77 Integrated Diagnostics
    Guideline 78 Producibility
    TABLES
    INDEX
    CONCLUDING MATERIAL

    Abstract - (Show below) - (Hide below)

    Describes guidance and lessons learned in the selection of documentation for the design of electronic equipment. This handbook is for guidance only and cannot be cited as a requirement. If it is, the contractor does not have to comply.

    General Product Information - (Show below) - (Hide below)

    Committee AREA SESS
    Development Note Supersedes MIL STD 454 (N). (05/2007) B NOTICE 1 - Notice of Validation. (12/2012) NEW CHILD NOT 2 2020 IS ADDED
    Document Type Standard
    Product Note NEW CHILD NOT 2 2020 IS ADDED
    Publisher US Military Specs/Standards/Handbooks
    Status Current

    Standards Referenced By This Book - (Show below) - (Hide below)

    MIL DTL 6162 : C GENERATORS AND STARTER-GENERATORS, ELECTRICAL DIRECT CURRENT, NOMINAL 30 VOLTS, AIRCRAFT GENERAL SPECIFICATION FOR
    MIL PRF 49446 : B DETECTOR-DEWAR, DT-591A/UA
    MIL STD 1472 : G HUMAN ENGINEERING
    MIL HDBK 516 : C AIRWORTHINESS CERTIFICATION CRITERIA
    MIL PRF 62368 : C MOTOR, GEARHEAD, 18 - 30 VOLTS, DIRECT CURRENT
    SAE AS 5657 : 2013 TEST PLAN/PROCEDURE FOR AS5643 IEEE-1394B INTERFACE REQUIREMENTS FOR MILITARY AND AEROSPACE VEHICLE APPLICATIONS
    MIL DTL 22442 : G CABLE ASSEMBLIES, AIRCRAFT AUDIO, GENERAL SPECIFICATION FOR
    MIL PRF 49291 : D FIBER, OPTICAL, (METRIC) GENERAL SPECIFICATION FOR
    MIL DTL 2726 : C RECEPTACLE, RECEPTACLE PLUGS, SWITCH AND RECEPTACLES, AND OUTLETS (ELECTRICAL), GENERAL SPECIFICATION FOR
    MIL DTL 83454 : B TERMINALS, STUD, BLIND PLATE, FOR ELECTRICAL BONDING AND GROUNDING (NONINSULATED)
    MIL DTL 9490 : E FLIGHT CONTROL SYSTEMS - DESIGN, INSTALLATION AND TEST OF PILOTED AIRCRAFT, GENERAL SPECIFICATION FOR
    MIL STD 464 : C ELECTROMAGNETIC ENVIRONMENTAL EFFECTS REQUIREMENTS FOR SYSTEMS
    MIL PRF 25620 : D TESTER, OXYGEN MASK, HEADSET AND MICROPHONE, TYPE MQ-1A
    MIL DTL 52876 : D CABINETS, MONITOR, CY-7359/FSS-9(V) CY-7360/FSS-9(V), AND CY-7361/FSS-9(V)
    IEEE DRAFT 1505 : 0 RECEIVER FIXTURE INTERFACE SPONSORED BY THE CONNECTORS TECHNICAL COMMITTEE TC-55 OF THE IEEE INSTRUMENTATION & MEASUREMENT SOCIETY
    MIL PRF 53090 : B BLADE, MINE CLEARING
    SAE ARP 1281 : 2002 ACTUATORS: AIRCRAFT FLIGHT CONTROLS, POWER OPERATED, HYDRAULIC, GENERAL SPECIFICATION FOR
    ASTM F 1166 : 2007 : R2013 Standard Practice for Human Engineering Design for Marine Systems, Equipment, and Facilities
    SAE AIR 5451 : 2017 A GUIDE TO LANDING GEAR SYSTEM INTEGRATION
    MIL PRF 14465 : D LIGHTS, COMPOSITE, VEHICULAR (METRIC)
    MIL DTL 83723 : H CONNECTORS, ELECTRICAL, CIRCULAR, ENVIRONMENT RESISTING AND HERMETICALLY SEALED, RECEPTACLES AND PLUGS, GENERAL SPECIFICATION FOR
    MIL PRF 49163 : B VIDEO PREAMPLIFIER, AM-6923/UA
    MIL DTL 22442/35 : B CABLE ASSEMBLIES, AIRCRAFT AUDIO, CABLE
    BS IEC 63004 : 2015 STANDARD FOR RECEIVER FIXTURE INTERFACE
    BS EN 4165-001 : 2015 AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, MODULAR - OPERATING TEMPERATURE 175 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION
    MIL DTL 24223 : D LOUDSPEAKER, PERMANENT MAGNET, SHIPBOARD ANNOUNCING SYSTEMS
    EIA 933 : 2015 REQUIREMENTS FOR A COTS ASSEMBLY MANAGEMENT PLAN
    EIA STD 4899 : 2017-05 REQUIREMENTS FOR AN ELECTRONIC COMPONENTS MANAGEMENT PLAN
    MIL PRF 83536 : F RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, 25 AMPERES AND BELOW, GENERAL SPECIFICATION FOR
    MIL HDBK 62 : 0 DOCUMENTATION OF DIGITAL ELECTRONIC SYSTEMS WITH VHDL
    MIL PRF 32144 : B CLOCK, AIRCRAFT, ELECTRONIC
    MIL DTL 55661 : C CONNECTOR, PLUG, ELECTRICAL UG-1870( )/U CONNECTOR, RECEPTACLE, ELECTRICAL UG-1837( )/U
    MIL PRF 49167 : B AUXILIARY CONTROL, VIDEO PL-1402/UA
    MIL PRF 49384 : B OPTICAL IMAGER, SU-121/UA
    MIL PRF 55359 : A ANTENNA AS-1304()/ARN-30
    MIL PRF 55371 : B TAPE, RADIO FREQUENCY MEASURING (P/O ANTENNA GROUP, AN/GRA-50())
    DSCC 85122 : G INDICATOR ASSEMBLIES: RED, YELLOW, GREEN; PLAIN AND FILTERED LENSES; PANEL-SEALED, AND PANEL AND REAR SEALED
    DSCC 88013 : G DELAY LINES, PASSIVE, 3-PIN, SIP
    02/706952 DC : DRAFT MAY 2002 PREN 4530-001 - AEROSPACE SERIES - SEALING SLEEVES USED IN ELEMENTS OF CONNECTION - PART 001: TECHNICAL SPECIFICATION
    MIL DTL 55235 : A CONNECTORS, COAXIAL, RADIO FREQUENCY, SERIES TPS, GENERAL SPECIFICATION
    MIL PRF 62478 : A COUPLER, OPTICAL
    JSSG 2009 : A AIR VEHICLE SUBSYSTEMS (JOINT SERVICE SPECIFICATION GUIDE)
    MIL PRF 32222 : A HEATER, VEHICULAR COMPARTMENT MULTIFUEL BURNING 24 VOLT, DC 15,000 - 30,000 BTU/HR
    13/30280018 DC : 0 BS EN 2997-001 - AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, COUPLED BY THREADED RING, FIRE-RESISTANT OR NON FIRE-RESISTANT, OPERATING TEMPERATURES -65 DEGREES C TO 175 DEGREES C CONTINUOUS, 200 DEGREES C CONTINUOUS, 260 DEGREES C PEAK - PART 001: TECHNICAL SPECIFICATION
    SAE ARP 5311 : 2016 AEROSPACE-INTERFACE DEFINITION FOR MECHANICAL ACTUATION SUBSYSTEMS
    MIL DTL 22442/3 : B CABLE ASSEMBLY, AIRCRAFT AUDIO, CABLE (RETRACTILE)
    MIL PRF 49176 : B REGULATOR, BIAS VOLTAGE, CN-1503/UA
    MIL PRF 49404 : A BIAS VOLTAGE REGULATOR, CN-1559/UA
    MIL DTL 24765 : B POWER SUPPLY, UNINTERRUPTIBLE, STATIC (NAVAL SHIPBOARD)
    MIL PRF 49434 : A AIMING LIGHT, INFRARED, AN/PAQ-4C
    MIL DTL 23971 : E POWER DIVIDERS, POWER COMBINERS, AND POWER DIVIDER/COMBINERS, GENERAL SPECIFICATION FOR
    MIL DTL 4510 : F SPOTLIGHTS, INCANDESCENT, ROOF-MOUNTED, AUTOMOTIVE
    MIL DTL 49092 : A HEADSET-MICROPHONE H-325( )/TTC
    MIL DTL 24728/11 : 0 INTERCONNECTING BOX, FIBER OPTIC, SPLICE TRAY HOLDER MODULE, 8 TRAY
    BS EN 16602-70:2016 Space product assurance. Materials, mechanical parts and processes
    MIL DTL 24558 : B TERMINAL BOXES, CONNECTION, FOR ELECTRICAL AND ELECTRONIC SYSTEMS, GENERAL SPECIFICATION FOR
    MIL R 83516 : C RELAYS, REED, DRY, GENERAL SPECIFICATION FOR
    MIL DTL 868 : A VALVES, HYDRAULIC DIRECTIONAL CONTROL, GENERAL SPECIFICATION FOR
    MIL HDBK 1760 : A AIRCRAFT/STORE ELECTRICAL INTERCONNECTION SYSTEM
    MIL STD 1678-3 : C FIBER OPTIC CABLING SYSTEMS REQUIREMENTS AND MEASUREMENTS - PART 3: PHYSICAL, MECHANICAL, ENVIRONMENTAL AND MATERIAL MEASUREMENTS (PART 3 OF 6 PARTS)
    I.S. EN 4165-001:2015 AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, MODULAR - OPERATING TEMPERATURE 175 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION
    MIL DTL 16377 : J FIXTURES, LIGHTING; AND ASSOCIATED PARTS; SHIPBOARD USE, GENERAL SPECIFICATION FOR
    MIL PRF 49319 : A DETECTOR-DEWAR, DT-591B/UA
    MIL PRF 85045/28 : A CABLE, FIBER OPTIC, NINETEEN TUBE, BLOWN OPTICAL FIBER, STANDARD AND ENHANCED PERFORMANCE, CABLE CONFIGURATION TYPE 5 (TUBE), APPLICATION B (SHIPBOARD), CABLE CLASS SM AND MM, (METRIC)
    MIL DTL 85670 : D ANTENNA, BROADBAND AS-3191/A, AS-3792/A, AND AS-3793/A
    13/30283195 DC : 0 BS EN 4652-001 - AEROSPACE SERIES - CONNECTORS, COAXIAL, RADIOFREQUENCY - PART 001: TECHNICAL SPECIFICATION
    MIL PRF 29504 : B TERMINI, FIBER OPTIC CONNECTOR, REMOVABLE, GENERAL SPECIFICATION FOR
    MIL PRF 64266 : B CONNECTORS, FIBER OPTIC, CIRCULAR AND RECTANGULAR, PLUG AND RECEPTACLE STYLE, MULTIPLE REMOVABLE GENDERLESS TERMINI, ENVIRONMENT RESISTING GENERAL SPECIFICATION FOR
    MIL DTL 49198 : B HEADSET-MICROPHONE KIT, MK-1564( )/AIC
    ASTM F 1166 : 2007 Standard Practice for Human Engineering Design for Marine Systems, Equipment, and Facilities
    MIL DTL 52869 : C SENSOR GROUP, PASSIVE ULTRASONIC: RECEIVER R-1860/FSS-9(V) AND PROCESSOR MX-9443/FSS-9(V)
    MIL DTL 25627 : D TRANSMITTER, SYNCHRO, ANGLE OF ATTACK OR SIDESLIP
    MIL PRF 49185 : B RADIO SET AN/GRC-103(V)3
    MIL DTL 15024 : F PLATES AND TAGS FOR IDENTIFICATION OF EQUIPMENT, GENERAL SPECIFICATION FOR
    13/30295341 DC : 0 BS EN 4644-001 - AEROSPACE SERIES - CONNECTOR, ELECTRICAL AND OPTICAL, RECTANGULAR, MODULAR, RECTANGULAR INSERTS, OPERATING TEMPERATURE 175 DEGREES C (OR 125 DEGREES C) CONTINUOUS - PART 001: TECHNICAL SPECIFICATION
    13/30278621 DC : 0 BS EN 4165-001 - AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, MODULAR - OPERATING TEMPERATURE 175 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION
    13/30287034 DC : 0 BS EN 3660-001 - AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 001: TECHNICAL SPECIFICATION
    MIL DTL 83522 : E CONNECTORS, FIBER OPTIC, SINGLE FERRULE, GENERAL SPECIFICATION FOR
    09/30206879 DC : 0 BS EN 2997-001 - AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, COUPLED BY THREADED RING, FIRE-RESISTANT OR NON FIRE-RESISTANT, OPERATING TEMPERATURES -65 DEGREES C TO 175 DEGREES C CONTINUOUS, 200 DEGREES C CONTINUOUS, 260 DEGREES C PEAK - PART 001: TECHNICAL SPECIFICATION
    MIL PRF 49136 : C COUNTERMEASURES TEST SET, AN/ALM-178()
    MIL DTL 15103 : G SALINITY INDICATING EQUIPMENT
    MIL PRF 62186 : A GENERATOR, ALTERNATING CURRENT (650 AMPERE RECTIFIED), 28 VOLTS DIRECT CURRENT (OIL COOLED)
    MIL PRF 49177 : B SCAN-INTERLACE, PL-1408/UA
    MIL DTL 38195 : D GENERATOR SET, GAS TURBINE ENGINE, 60 KW 400 HZ, GENERAL PURPOSE
    MIL DTL 32529 : 0 POWER ELECTRONIC CONVERSION EQUIPMENT, NAVAL SHIPBOARD
    BS EN 2997-001 : 2017 AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, COUPLED BY THREADED RING, FIRE-RESISTANT OR NON FIRE-RESISTANT, OPERATING TEMPERATURES -65 DEGREES C TO 175 DEGREES C CONTINUOUS, 200 DEGREES C CONTINUOUS, 260 DEGREES C PEAK - PART 001: TECHNICAL SPECIFICATION
    MIL DTL 24728/8 : A INTERCONNECTING BOX, FIBER OPTIC, FUSION SPLICE TRAY AND TRAY HOLDER MODULE
    10/30217640 DC : 0 BS EN 4701-001 - AEROSPACE SERIES - CONNECTORS, OPTICAL, RECTANGULAR, MODULAR, OPERATING TEMPERATURE 125 DEGREES C, FOR EN 4531 CONTACTS - PART 001: TECHNICAL SPECIFICATION
    MIL PRF 32272 : A INTEGRATED POWER MANAGEMENT CENTER (IPMC)
    MIL HDBK 470 : A DESIGNING AND DEVELOPING MAINTAINABLE PRODUCTS AND SYSTEMS - VOLUME 1
    MIL PRF 83383 : F CIRCUIT BREAKERS, REMOTE CONTROL, THERMAL, TRIP FREE, GENERAL SPECIFICATION FOR
    BS EN 4652-001 : 2015 AEROSPACE SERIES - CONNECTORS, COAXIAL, RADIO FREQUENCY - PART 001: TECHNICAL SPECIFICATION
    07/30169484 DC : 0 BS EN 4644-001 - AEROSPACE SERIES - CONNECTOR, ELECTRICAL AND OPTICAL, RECTANGULAR, MODULAR, RECTANGULAR INSERTS - OPERATING TEMPERATURE 175 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION
    NASA STD 5005(INT) : 2007 THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT
    MIL PRF 49170 : B OPTICAL IMAGER, SU-97-UA, SU-97A/UA, AND SU-97B/UA
    NF EN 4532 : 2009 AEROSPACE SERIES - CABLES, OPTICAL, SINGLE CORE 200 [MU]M/280 [MU]M FIBRE, 2,5 MM OUTER JACKET - TECHNICAL SPECIFICATION
    ADS-13F-HDBK : 1997 AERONAUTICAL DESIGN STANDARD - HANDBOOK - AIR VEHICLE MATERIALS AND PROCESSES
    MIL HDBK 338 : B ELECTRONIC RELIABILITY DESIGN HANDBOOK
    MIL PRF 49293 : B RADIAC SET, AN/PDR-75
    BS EN 4532:2009 (published 2009-03) Aerospace series. Cables, optical, single core 200 ?m/280 ?m fibre, 2,5 mm outer jacket. Technical specification
    EN 2997-001:2017 AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, COUPLED BY THREADED RING, FIRE-RESISTANT OR NON FIRE-RESISTANT, OPERATING TEMPERATURES -65 DEGREES C TO 175 DEGREES C CONTINUOUS, 200 DEGREES C CONTINUOUS, 260 DEGREES C PEAK - PART 001: TECHNICAL SPECIFICATION
    MIL DTL 24705 : B PENETRATORS, MULTIPLE CABLE, ELECTRIC CABLE, GENERAL SPECIFICATION FOR
    MIL DTL 52872 : D SENSOR GROUP, ULTRASONIC MOTION: TRANSCEIVER RT-1161/FSS-9(V) AND PROCESSOR MX-9444/FSS-9(V)
    ANSI C63.15 : 2010 RECOMMENDED PRACTICE FOR THE IMMUNITY MEASUREMENT OF ELECTRICAL AND ELECTRONIC EQUIPMENT
    MIL DTL 24231 : E CONNECTORS, PLUGS, RECEPTACLES, ADAPTERS, HULL INSERTS, AND HULL INSERT PLUGS, PRESSURE-PROOF, GENERAL SPECIFICATION FOR
    MIL PRF 28876 : E CONNECTORS, FIBER OPTIC, CIRCULAR, PLUG AND RECEPTACLE STYLE, MULTIPLE REMOVABLE TERMINI, GENERAL SPECIFICATION FOR
    MIL DTL 28875 : C AMPLIFIERS, RADIO-FREQUENCY AND MICROWAVE, SOLID-STATE, GENERAL SPECIFICATION FOR
    MIL PRF 85046 : A ACTUATOR, LINEAR, ELECTROMECHANICAL
    MIL DTL 62421 : A CONTROL, UNIT, ELECTRONIC, DIGITAL
    ARINC 404B-2:2015 CONNECTORS, RACK AND PANEL, RECTANGULAR REAR RELEASE CRIMP CONTACTS
    MIL PRF 49166/1 : B MECHANICAL SCANNER, MX-9872(V)1/UA
    MIL DTL 3885 : H CABLE ASSEMBLIES AND CORD ASSEMBLIES, ELECTRICAL
    MIL PRF 62430 : B HARNESS ASSEMBLY, THERMOCOUPLE
    MIL DTL 12883/50 : B SOCKETS AND ACCESSORIES FOR PLUG-IN ELECTRONIC COMPONENTS, BRACKETS AND SOCKET ASSEMBLY FOR RELAYS, 2-POLE, 10 AMPERES (MIL-PRF-6106 AND MIL-PRF-83536)
    MIL PRF 49168 : C SCAN-INTERLACE, PL-1403/UA, PL-1403A/UA
    PREN 3645-001 : 200P2 AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, SCOOP-PROOF, TRIPLE START THREADED COUPLING, OPERATING TEMPERATURE 175 DEGREES C OR 200 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION
    MIL DTL 3976 : F LIGHTS, MARKER, CLEARANCE (SERVICE AND BLACKOUT), GENERAL SPECIFICATION FOR
    MIL DTL 32408 : 0 INTEGRAL MOTOR PUMP (IMP)
    MIL DTL 13484 : G SWITCH, SENSITIVE: 30 VOLTS DIRECT CURRENT MAXIMUM, WATERPROOF
    MIL DTL 5815 : H ANTENNA, AIRBORNE, UHF - BAND, GENERAL SPECIFICATION FOR
    MIL DTL 24705/4 : A PENETRATORS, MULTIPLE CABLE, COMPACT RECTANGULAR METAL FRAME AND BLOCKS, ELECTRICAL AND FIBER OPTIC CABLE
    DSCC 87019 : G INDICATOR ASSEMBLIES, IR SECURE LIGHTING; RED, YELLOW, GREEN; PANEL SEALING
    PREN 4532 : 200P1 AEROSPACE SERIES - CABLES, OPTICAL, SINGLE CORE 200 MICROMETER/280 MICROMETER FIBRE, 2,5 MM OUTER JACKET - TECHNICAL SPECIFICATION
    PREN 3660-001 : 200P3 AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 001: TECHNICAL SPECIFICATION
    MIL DTL 83729 : C CHOPPERS, ELECTROMECHANICAL, GENERAL SPECIFICATION FOR
    PREN 4165-001 : 200P2 AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, MODULAR - OPERATING TEMPERATURE 175 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION
    MIL DTL 21604 : G SWITCHES, ROTARY, MULTIPOLE AND SELECTOR, GENERAL SPECIFICATION FOR
    MIL PRF 83419 : F ALTIMETER, SERVO CONTROLLED, AUTOMATIC PRESSURE STANDBY
    MIL HDBK 1473 : A COLOR AND MARKING OF ARMY MATERIEL
    PREN 3372-001 : 200P1 AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, MEDIUM AND HIGH CONTACT DENSITY, SCOOP-PROOF WITH BAYONET COUPLING, OPERATING TEMPERATURES -65 DEGREES C TO 175 DEGREES C OR 200 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION
    MIL PRF 32236 : 0 GENERATOR, CHLORINE PORTABLE ELECTROLYTIC (PECG)
    MIL DTL 28791 : D ISOLATORS AND CIRCULATORS, RADIO FREQUENCY, GENERAL SPECIFICATION FOR
    MIL DTL 18396 : E SWITCHES, METER AND CONTROL, NAVAL SHIPBOARD
    MIL DTL 81581/8 : A HOSE ASSEMBLIES, CABLE ASSEMBLIES, COMMUNICATION, ASSOCIATED
    MIL DTL 27193 : D INDICATOR, ATTITUDE ARU-2B/A
    MIL DTL 12883/51 : B SOCKETS AND ACCESSORIES FOR PLUG-IN ELECTRONIC COMPONENTS, BRACKET AND SOCKET ASSEMBLY FOR RELAYS, 4-POLE, 10 AMPERES (MIL-PRF-6106, MIL-PRF-83536, AND MIL-PRF-83726)
    MIL PRF 49164 : C VIDEO POSTAMPLIFIER-CONTROL DRIVER, AM-6924/UA
    MIL PRF 49166 : C MECHANICAL SCANNER, MX-9872(V)/UA; GENERAL SPECIFICATION FOR
    SAE ARP 1070E : 2019 DESIGN AND TESTING OF ANTISKID BRAKE CONTROL SYSTEMS FOR TOTAL AIRCRAFT COMPATIBILITY
    PREN 4530-001 : 200P1 AEROSPACE SERIES - SEALING SLEEVES USED IN ELEMENTS OF CONNECTION - PART 001: TECHNICAL SPECIFICATION
    SAE AIR 1277 : 2005 COOLING OF MILITARY AVIONIC EQUIPMENT
    SAE ARP 81490 : 2016 TRANSMISSION LINES, TRANSVERSE ELECTROMAGNETIC MODE
    SAE AS 7928 : 2011 TERMINALS, LUG: SPLICES, CONDUCTOR: CRIMP STYLE, COPPER, GENERAL SPECIFICATION FOR
    SAE AS 5643/1 : 2005 S400 COPPER MEDIA INTERFACE CHARACTERISTICS OVER EXTENDED DISTANCES
    PREN 4644-001 : 200P3 AEROSPACE SERIES - CONNECTOR, ELECTRICAL AND OPTICAL, RECTANGULAR, MODULAR, RECTANGULAR INSERTS, OPERATING TEMPERATURE 175 DEGREES C (OR 125 DEGREES C) CONTINUOUS - PART 001: TECHNICAL SPECIFICATION
    PREN 4652-001 : DRAFT 2014 AEROSPACE SERIES - CONNECTORS, COAXIAL, RADIO FREQUENCY - PART 001: TECHNICAL SPECIFICATION
    SAE AS 83519 : 2015 SHIELD TERMINATION, SOLDER STYLE, INSULATED, HEAT-SHRINKABLE, ENVIRONMENT RESISTANT GENERAL SPECIFICATION FOR
    SAE AS 4941 : 2015 AEROSPACE - GENERAL REQUIREMENTS FOR COMMERCIAL AIRCRAFT HYDRAULIC COMPONENTS
    SAE AS 81703 : 2012 CONNECTORS, ELECTRIC, CIRCULAR, MINIATURE, RACK AND PANEL OR PUSH-PULL COUPLING, ENVIRONMENT RESISTING
    AEDP-6 : 2014 NATO ADVANCED DATA STORAGE INTERFACE REQUIREMENTS AND IMPLEMENTATION GUIDE
    SAE AIR 4004 : 2015 GUIDE FOR INSTALLATION OF ELECTRICAL WIRE AND CABLE ON AIRCRAFT LANDING GEAR
    PREN 2997-001 : 200P4 AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, COUPLED BY THREADED RING, FIRE-RESISTANT OR NON FIRE-RESISTANT, OPERATING TEMPERATURES -65 DEGREES C TO 175 DEGREES C CONTINUOUS, 200 DEGREES C CONTINUOUS, 260 DEGREES C PEAK - PART 001: TECHNICAL SPECIFICATION
    AEP-24 : 2006 AIRCRAFT ELECTRICAL HAZARDS ON THE FLIGHT LINE
    SAE ARP 1070 : 2014 DESIGN AND TESTING OF ANTISKID BRAKE CONTROL SYSTEMS FOR TOTAL AIRCRAFT COMPATIBILITY
    BS EN 3660-001:2016 AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 001: TECHNICAL SPECIFICATION
    SAE AS 4914 : 2016 AIRCRAFT FLUORESCENT LIGHTING BALLAST/FIXTURE SAFETY STANDARD
    SAE ARP 94910 : 2012 AEROSPACE - VEHICLE MANAGEMENT SYSTEMS - FLIGHT CONTROL DESIGN, INSTALLATION AND TEST OF, MILITARY UNMANNED AIRCRAFT, SPECIFICATION GUIDE FOR
    I.S. EN 4652-001:2015 AEROSPACE SERIES - CONNECTORS, COAXIAL, RADIO FREQUENCY - PART 001: TECHNICAL SPECIFICATION
    I.S. EN 16602-70:2016 SPACE PRODUCT ASSURANCE - MATERIALS, MECHANICAL PARTS AND PROCESSES
    BS EN 3660-001:2019 AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 001: TECHNICAL SPECIFICATION
    SAE AS 6019 : 2012 ARC FAULT CIRCUIT BREAKER (AFCB), AIRCRAFT, TRIP-FREE 28 VDC
    I.S. EN 4644-001:2017 AEROSPACE SERIES - CONNECTOR, ELECTRICAL AND OPTICAL, RECTANGULAR, MODULAR, RECTANGULAR INSERTS, OPERATING TEMPERATURE 175 DEGREES C (OR 125 DEGREES C) CONTINUOUS - PART 001: TECHNICAL SPECIFICATION
    BS EN 4644-001:2017 AEROSPACE SERIES - CONNECTOR, ELECTRICAL AND OPTICAL, RECTANGULAR, MODULAR, RECTANGULAR INSERTS, OPERATING TEMPERATURE 175 DEGREES C (OR 125 DEGREES C) CONTINUOUS - PART 001: TECHNICAL SPECIFICATION
    SAE AIR 38 : 2015 GUIDE FOR THE DESIGN OF THREADED SCREW OR STUD TYPE ELECTRICAL EQUIPMENT TERMINATIONS
    SAE AS 12500 : 2018 CORROSION PREVENTION AND DETERIORATION CONTROL IN ELECTRONIC COMPONENTS AND ASSEMBLIES
    SAE AS 94900 : 2007 AEROSPACE - FLIGHT CONTROL SYSTEMS - DESIGN, INSTALLATION AND TEST OF PILOTED MILITARY AIRCRAFT, GENERAL SPECIFICATION FOR
    SAE AS 58091 : 2012 CIRCUIT BREAKERS, TRIP-FREE, AIRCRAFT, GENERAL SPECIFICATION FOR
    IEC 63004:2015 Standard for receiver fixture interface
    SAE AS 81714 : 2014 TERMINAL JUNCTION SYSTEM (TJS), ENVIRONMENT RESISTANT, GENERAL SPECIFICATION FOR
    I.S. EN 3660-001:2016 AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 001: TECHNICAL SPECIFICATION
    I.S. EN 4532:2009 AEROSPACE SERIES - CABLES, OPTICAL, SINGLE CORE 200 [MU]M/280 [MU]M FIBRE, 2,5 MM OUTER JACKET - TECHNICAL SPECIFICATION
    SAE AS 81659 : 2017 CONNECTORS, ELECTRICAL, RECTANGULAR CRIMP CONTACTS, GENERAL SPECIFICATION FOR
    SAE AS 39029 : 2017 CONTACTS, ELECTRICAL CONNECTOR, GENERAL SPECIFICATION FOR
    MIL DTL 15514 : G TELEPHONE EQUIPMENT, SOUND POWERED TELEPHONE HANDSET, HEADSET - CHEST SET, AND HEADSET - CHEST SET, NOISE ATTENUATING
    SAE ARP 731 : 2015 GENERAL REQUIREMENTS FOR APPLICATION OF VAPOR CYCLE REFRIGERATION SYSTEMS FOR AIRCRAFT
    16/30353142 DC : 0 BS EN 3645-001 - AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, SCOOP-PROOF, TRIPLE START THREADED COUPLING, OPERATING TEMPERATURE 175 DEGRES C OR 200 DEGRES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION
    SAE AS 85028 : 2017 CONNECTOR, ELECTRICAL, RECTANGULAR, INDIVIDUAL CONTACT SEALING, POLARIZED CENTER JACKSCREW, GENERAL SPECIFICATION FOR
    EN 4644-001:2017 AEROSPACE SERIES - CONNECTOR, ELECTRICAL AND OPTICAL, RECTANGULAR, MODULAR, RECTANGULAR INSERTS, OPERATING TEMPERATURE 175 DEGREES C (OR 125 DEGREES C) CONTINUOUS - PART 001: TECHNICAL SPECIFICATION
    I.S. EN 2997-001:2017 AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, COUPLED BY THREADED RING, FIRE-RESISTANT OR NON FIRE-RESISTANT, OPERATING TEMPERATURES -65 DEGREES C TO 175 DEGREES C CONTINUOUS, 200 DEGREES C CONTINUOUS, 260 DEGREES C PEAK - PART 001: TECHNICAL SPECIFICATION
    I.S. EN 3645-001:2015 AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, SCOOP-PROOF, TRIPLE START THREADED COUPLING, OPERATING TEMPERATURE 175 DEGREES C OR 200 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION
    DIN EN 3660-001:2016-04 AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 001: TECHNICAL SPECIFICATION
    DIN EN 3646-001:2016-03 AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, BAYONET COUPLING, OPERATING TEMPERATURE 175 DEGREES C OR 200 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION
    BS EN 4530-001 : 2006 AEROSPACE SERIES - SEALING SLEEVES USED IN ELEMENTS OF CONNECTION - PART 001: TECHNICAL SPECIFICATION
    BS EN 3372-001 : 2007 AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, MEDIUM AND HIGH CONTACT DENSITY, SCOOP-PROOF WITH BAYONET COUPLING, OPERATING TEMPERATURES -65 DEGREES C TO 175 DEGREES C OR 200 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION
    BS EN 3716-001 : 2006 AEROSPACE SERIES - CONNECTOR, SINGLE-WAY, WITH TRIAXIAL INTERFACE, FOR TRANSMISSION OF DIGITAL DATA - PART 001: TECHNICAL SPECIFICATION
    13/30292601 DC : 0 BS EN 3646-001 - AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, BAYONET COUPLING, OPERATING TEMPERATURE 175 DEGREES C OR 200 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION
    BS EN 3645-001:2015 AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, SCOOP-PROOF, TRIPLE START THREADED COUPLING, OPERATING TEMPERATURE 175 DEGREES C OR 200 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION
    BS EN 4529-001 : 2006 AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - SEALING PLUGS - PART 001: TECHNICAL SPECIFICATION
    BS EN 3708-001 : 2006 AEROSPACE SERIES - MODULAR INTERCONNECTION SYSTEMS - TERMINAL JUNCTION SYSTEMS - PART 001: TECHNICAL SPECIFICATION
    BS EN 3646-001 : 2015 AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, BAYONET COUPLING, OPERATING TEMPERATURE 175 DEGREES C OR 200 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION
    NASA MSFC SPEC 3635 : 2012 PYROTECHNIC SYSTEM SPECIFICATION
    NASA STD 6016(INT) : 2006 STANDARD MATERIALS AND PROCESSES REQUIREMENTS FOR SPACECRAFT
    NASA STD 5005 : 2013 STANDARD FOR THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT
    MIL DTL 53078 : A MOUNTING KIT: M1 TANK CLEARED LANE MARKING SYSTEM (CLAMS)
    NASA KSC STD E 0001 : 2008 DESIGN OF ELECTRICAL CONTROL AND MONITORING SYSTEMS, EQUIPMENT (GSE), AND PANELS, STANDARD FOR
    NASA KSC DE 512-SM : 2012 FACILITY SYSTEMS, GROUND SUPPORT SYSTEMS, AND GROUND SUPPORT EQUIPMENT GENERAL DESIGN REQUIREMENTS
    NASA STD 6016 : 2016 STANDARD MATERIALS AND PROCESSES REQUIREMENTS FOR SPACECRAFT
    NASA STD 8719.24 : 2011 NASA EXPENDABLE LAUNCH VEHICLE PAYLOAD SAFETY REQUIREMENTS
    NASA MSFC STD 3012 : 2012 ELECTRICAL, ELECTRONIC, AND ELECTROMECHANICAL (EEE) PARTS MANAGEMENT AND CONTROL REQUIREMENTS FOR MSFC SPACE FLIGHT HARDWARE
    NASA JSC 27301 : 2009 MATERIALS AND PROCESSES SELECTION, CONTROL, AND IMPLEMENTATION PLAN FOR JSC FLIGHT HARDWARE
    I.S. EN 3646-001:2015 AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, BAYONET COUPLING, OPERATING TEMPERATURE 175 DEGREES C OR 200 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION
    IPC WHMA A 620 DANISH : B REQUIREMENTS AND ACCEPTANCE FOR CABLE AND WIRE HARNESS ASSEMBLIES
    MIL HDBK 115 : C U.S. ARMY REVERSE ENGINEERING HANDBOOK (GUIDELINES AND PROCEDURES)
    EN 16602-70:2016 (edition 2) Space product assurance - Materials, mechanical parts and processes
    DSCC 99002 : A TRANSFORMER, SWITCHING
    EN 3708-001 : 2006 AEROSPACE SERIES - MODULAR INTERCONNECTION SYSTEMS - TERMINAL JUNCTION SYSTEMS - PART 001: TECHNICAL SPECIFICATION
    MIL DTL 83725 : E RELAYS, VACUUM, GENERAL SPECIFICATION FOR
    EN 4165-001:2015/AC:2017 AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, MODULAR - OPERATING TEMPERATURE 175 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION
    EN 3372-001 : 2007 AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, MEDIUM AND HIGH CONTACT DENSITY, SCOOP-PROOF WITH BAYONET COUPLING, OPERATING TEMPERATURES -65 DEGREES C TO 175 DEGREES C OR 200 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION
    EN 4530-001 : 2006 AEROSPACE SERIES - SEALING SLEEVES USED IN ELEMENTS OF CONNECTION - PART 001: TECHNICAL SPECIFICATION
    EN 4532 : 2009 Aerospace series - Cables, optical, single core 200 µm/280 µm fibre, 2,5 mm outer jacket - Technical specification
    EN 3646-001:2015 AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, BAYONET COUPLING, OPERATING TEMPERATURE 175 DEGREES C OR 200 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION
    MIL DTL 9398 : D GENERATOR, TACHOMETER, TWO-POLE, HIGH TEMPERATURE, AIRCRAFT
    EN 3660-001:2016 AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 001: TECHNICAL SPECIFICATION
    EN 3645-001:2015 AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, SCOOP-PROOF, TRIPLE START THREADED COUPLING, OPERATING TEMPERATURE 175 DEGREES C OR 200 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION
    EN 3716-001 : 2006 AEROSPACE SERIES - CONNECTOR, SINGLE-WAY, WITH TRIAXIAL INTERFACE, FOR TRANSMISSION OF DIGITAL DATA - PART 001: TECHNICAL SPECIFICATION
    EN 4652-001 : 2015 AEROSPACE SERIES - CONNECTORS, COAXIAL, RADIO FREQUENCY - PART 001: TECHNICAL SPECIFICATION
    EN 4529-001 : 2006 AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - SEALING PLUGS - PART 001: TECHNICAL SPECIFICATION
    MIL DTL 83361 : B INDICATOR, PRESSURE, OIL, DUAL, 0-100 PSI, EGU-18/A
    IPC HDBK 630 : 0 GUIDELINES FOR DESIGN, MANUFACTURE, INSPECTION AND TESTING OF ELECTRONIC ENCLOSURES ASSEMBLY
    MIL STD 186 : F PROTECTIVE FINISHING SYSTEMS FOR ROCKETS, GUIDED MISSILES, SUPPORT EQUIPMENT AND RELATED MATERIALS

    Standards Referencing This Book - (Show below) - (Hide below)

    MIL PRF 31031 : C CONNECTORS, ELECTRICAL, PLUGS AND RECEPTACLES, COAXIAL, RADIO FREQUENCY, HIGH RELIABILITY, FOR FLEXIBLE AND SEMIRIGID CABLES, GENERAL SPECIFICATION FOR
    MIL I 24092 : D INSULATING VARNISHES AND SOLVENTLESS RESINS FOR APPLICATION BY THE DIP PROCESS
    MIL DTL 5015 : H CONNECTORS, ELECTRICAL, CIRCULAR THREADED, AN TYPE - GENERAL SPECIFICATION FOR
    MIL I 3190 : F INSULATION SLEEVING, ELECTRICAL, FLEXIBLE, COATED, GENERAL SPECIFICATION FOR
    SAE AMS 3638 : 2012 TUBING, IRRADIATED POLYOLEFIN PLASTIC, ELECTRICAL INSULATION PIGMENTED, SEMI-RIGID, HEAT SHRINKABLE, 2 TO 1 SHRINK RATIO
    MMM A 121 : 0 ADHESIVE, BONDING VULCANIZED SYNTHETIC RUBBER TO STEEL
    NASM 5591 : 0 FASTENERS, PANEL, NONSTRUCTURAL
    MIL C 28754 : D CONNECTOR, ELECTRICAL, MODULAR AND COMPONENT PARTS, GENERAL SPECIFICATION FOR
    MIL I 23264 : A INSULATORS, CERAMIC, ELECTRICAL AND ELECTRONIC, GENERAL SPECIFICATION FOR
    MIL HDBK 505 : 0 DEFINITIONS OF ITEM LEVELS, ITEM EXCHANGEABILITY, MODELS, AND RELATED TERMS
    MIL I 17205 : C INSULATION CLOTH AND TAPE, ELECTRICAL, GLASS FIBER, VARNISHED
    MIL PRF 39006/22 : J CAPACITOR, FIXED, ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM (POLARIZED, SINTERED SLUG), +85 DEGREES C (VOLTAGE DERATED TO +125 DEGREES C), ESTABLISHED RELIABILITY, STYLE CLR79
    SD 19 : 0 LIFE CYCLE COST SAVINGS THROUGH PARTS MANAGEMENT
    MIL I 22129 : C INSULATION TUBING, ELECTRICAL, POLYTETRAFLUOROETHYLENE RESIN, NONRIGID (SEE ASTM D 3295)
    MMM A 134 : 0 ADHESIVE EPOXY RESIN, METAL TO METAL STRUCTURAL BONDING
    MIL W 81044 : B WIRE, ELECTRIC, CROSSLINKED POLYALKENE, CROSSLINKED ALKANE-IMIDE POLYMER, OR POLYARYLENE INSULATED, COPPER OR COPPER ALLOY
    FF S 210 : B SETSCREWS, SQUARE HEAD (INCH) AND SLOTTED HEADLESS (INCH AND METRIC)
    MIL A 46146 : B ADHESIVE-SEALANTS, SILICONE, RTV, NONCORROSIVE (FOR USE WITH SENSITIVE METALS AND EQUIPMENT)
    MIL DTL 55302 : G CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES
    MIL DTL 21097 : H CONNECTORS, ELECTRICAL, PRINTED WIRING BOARD, GENERAL PURPOSE GENERAL SPECIFICATION FOR
    NASM 27384 : 0 RIVET, BLIND, DRIVE TYPE
    MIL T 83721 : 0 TRANSFORMER, VARIABLE, POWER GENERAL SPECIFICATION FOR
    MIL PRF 39012 : F CONNECTORS, COAXIAL, RADIO FREQUENCY, GENERAL SPECIFICATION FOR
    A A 52414 : B BEARING, ROLLER, THRUST
    MIL I 24768/2 : 0 INSULATION, PLASTIC, LAMINATED, THERMOSETTING, GLASS-CLOTH, EPOXY-RESIN (GEE)
    ASTM D 4388 : 2013 Standard Specification for Nonmetallic Semi-Conducting and Electrically Insulating Rubber Tapes
    MIL PRF 55339 : C ADAPTERS, CONNECTORS, COAXIAL, RADIO FREQUENCY, (BETWEEN SERIES AND WITHIN SERIES), GENERAL SPECIFICATION FOR
    SAE AMS 3653 : 2016 TUBING, ELECTRICAL INSULATION, STANDARD WALL, EXTRUDED POLYTETRAFLUOROETHYLENE (PTFE)
    UL 94 : 6 TESTS FOR FLAMMABILITY OF PLASTIC MATERIALS FOR PARTS IN DEVICES AND APPLIANCES
    CFR 29(PTS1900-1910) : 0 LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR
    A A 52401 : 0 BEARING, SLEEVE (STEEL-BACKED)
    MIL DTL 24308 : G CONNECTORS, ELECTRIC, RECTANGULAR, NONENVIRONMENTAL, MINIATURE, POLARIZED SHELL, RACK AND PANEL, GENERAL SPECIFICATION FOR
    MIL W 81822 : A WIRE, ELECTRICAL, SOLDERLESS WRAP, INSULATED AND UNINSULATED, GENERAL SPECIFICATION FOR
    SAE AS 81936 : 2006 BEARINGS, PLAIN, SELF-ALIGNING (CU-BE BALL, CRES RACE) GENERAL SPECIFICATION FOR
    J STD 001 : F REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES
    A A 1936 : A ADHESIVES, CONTACT, NEOPRENE RUBBER
    MIL STD 810 : G ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS
    MIL HDBK 1861 : B SELECTION AND USE OF ELECTRICAL AND ELECTRONIC ASSEMBLIES, BOARDS, CARDS AND ASSOCIATED HARDWARE
    NAS 1686 : 0 RIVET, BLIND, ALUMINIUM SLEEVE, MECHANICALLY LOCKED SPINDLE, BULBED
    NASM 33557 : 0 NONSTRUCTURAL RIVETS FOR BLIND ATTACHMENT - LIMITATIONS FOR DESIGN AND USAGE
    IEEE C95.2 : 1999 RADIO-FREQUENCY ENERGY AND CURRENT-FLOW SYMBOLS
    MIL DTL 83513 : G CONNECTORS, ELECTRICAL, RECTANGULAR, MICROMINIATURE, POLARIZED SHELL, GENERAL SPECIFICATION FOR
    MIL B 8942 : A BEARINGS, PLAIN, TFE LINED, SELF-ALIGNING
    SAE AS 81765 : 2017 INSULATING COMPONENTS, MOLDED, ELECTRICAL, HEAT SHRINKABLE, GENERAL SPECIFICATION FOR
    MIL A 24179 : A ADHESIVE, FLEXIBLE UNICELLULAR - PLASTIC THERMAL INSULATION
    CFR 21(PTS800-1299) : 0 FOOD AND DRUGS - FOOD AND DRUG ADMINISTRATION, CHAPTER 1 DEPARTMENT OF HEALTH AND HUMAN SERVICES - PARTS 800-1299
    MIL DTL 81381 : C WIRE, ELECTRIC, POLYIMIDE-INSULATED, COPPER OR COPPER ALLOY
    MIL DTL 22992 : H CONNECTORS, PLUGS AND RECEPTACLES, ELECTRICAL, WATERPROOF, QUICK DISCONNECT, HEAVY DUTY TYPE, GENERAL SPECIFICATION FOR
    MIL DTL 83733 : E CONNECTORS, ELECTRICAL MINIATURE, RECTANGULAR TYPE, RACK TO PANEL, ENVIRONMENT RESISTING, 200 DEGREES C TOTAL CONTINUOUS OPERATING TEMPERATURE, GENERAL SPECIFICATION FOR
    MIL DTL 55116 : D CONNECTORS: MINIATURE AUDIO, FIVE-PIN AND SIX-PIN - GENERAL SPECIFICATION FOR
    ASTM D 3295 : 2015 : REDLINE Standard Specification for PTFE Tubing, Miniature Beading and Spiral Cut Tubing
    MIL DTL 1222 : J STUDS, BOLTS, SCREWS AND NUTS FOR APPLICATIONS WHERE A HIGH DEGREE OF RELIABILITY IS REQUIRED; GENERAL SPECIFICATION FOR
    MIL DTL 83503 : C CONNECTORS, ELECTRICAL, FLAT CABLE, AND/OR PRINTED WIRING BOARD, NONENVIRONMENTAL, GENERAL SPECIFICATION FOR
    MIL DTL 28804 : D CONNECTORS, PLUG AND RECEPTACLE, ELECTRIC, RECTANGULAR, HIGH DENSITY, POLARIZATION CENTER JACKSCREW - GENERAL SPECIFICATION FOR
    NASM 25027 : 0 NUT, SELF-LOCKING, 250 DEGREES F, 450 DEGREES F, AND 800 DEGREES F
    MIL B 81793 : D BEARING, BALL, PRECISION, FOR INSTRUMENTS AND ROTATING COMPONENTS
    MIL A 3920 : C ADHESIVE, OPTICAL, THERMOSETTING
    FF N 836 : E NUT, SQUARE, HEXAGON, CAP, SLOTTED, CASTLE, KNURLED, WELDING AND SINGLE BALL SEAT
    SAE AS 81934 : 2016 BEARINGS, SLEEVE, PLAIN AND FLANGED, SELF-LUBRICATING
    MIL DTL 26518 : C CONNECTORS, ELECTRICAL, MINIATURE, RACK AND PANEL, ENVIRONMENT RESISTANT, 200 DEGREES C AMBIENT TEMPERATURE - GENERAL SPECIFICATION FOR
    MMM A 138 : B ADHESIVE, METAL TO WOOD STRUCTURAL
    NASM 7838 : 2004 BOLT, INTERNAL WRENCHING, 160 KSI FTU
    MIL STD 889 : C DISSIMILAR METALS
    MIL PRF 39006/25 : E CAPACITORS, FIXED, ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM, (POLARIZED, SINTERED SLUG), (EXTENDED RANGE) 85 DEGREES C (VOLTAGE DERATED TO 125 DEGREES C), ESTABLISHED RELIABILITY, STYLE CLR81
    NASM 33522 : 0 RIVETS, BLIND, STRUCTURAL, MECHANICALLY LOCKED AND FRICTION RETAINER SPINDLE, (RELIABILITY AND MAINTAINABILITY) DESIGN AND CONSTRUCTION REQUIREMENT FOR
    AWS D17.2/D17.2M : 2013 SPECIFICATION FOR RESISTANCE WELDING FOR AEROSPACE APPLICATIONS
    NASM 8831 : 2003 FASTENERS, ALLOY STEEL, 450 DEGREES F EXTERNALLY THREADED, 180 KSI FTU, 108 KSI FSU, FATIGUE RATED
    SAE AMS A 25463 : 2013 ADHESIVE, FILM FORM, METALLIC STRUCTURAL SANDWICH CONSTRUCTION
    SAE AS 13341 : 1998 PROCESS FOR BARRIER COATING OF ANTI-FRICTION BEARING
    NASM 33540 : 2003 SAFETY WIRING, SAFETY CABLING, COTTER PINNING, GENERAL PRACTICES FOR
    NASM 8814 : 0 RIVETS, BLIND, NONSTRUCTURAL TYPE
    MIL I 19166 : C INSULATION TAPE, ELECTRICAL, HIGH-TEMPERATURE GLASS FIBER, PRESSURE-SENSITIVE
    IPC D 322 : 0 GUIDELINES FOR SELECTING PRINTED WIRING BOARD SIZES USING STANDARD PANEL SIZES
    MIL STD 464 : C ELECTROMAGNETIC ENVIRONMENTAL EFFECTS REQUIREMENTS FOR SYSTEMS
    MIL I 3158 : D INSULATION TAPE, ELECTRICAL GLASS FIBER [RESIN FILLED] AND CORD, FIBROUS GLASS
    ASTM D 5363 : 2016 : REDLINE Standard Specification for Anaerobic Single-Component Adhesives (AN)
    SAE AS 22759 : 2014 WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, COPPER OR COPPER ALLOY
    MIL I 24768/3 : 0 INSULATION, PLASTIC, LAMINATED, THERMOSETTING, GLASS-CLOTH, EPOXY-RESIN (GEB)
    ANSI Z136.1 : 2014 SAFE USE OF LASERS
    MIL DTL 83723 : H CONNECTORS, ELECTRICAL, CIRCULAR, ENVIRONMENT RESISTING AND HERMETICALLY SEALED, RECEPTACLES AND PLUGS, GENERAL SPECIFICATION FOR
    MIL A 22397 : 0 ADHESIVE, PHENOL AND RESORCINOL RESIN BASE (FOR MARINE SERVICE USE)
    NASM 5674 : 0 RIVETS, STRUCTURAL, ALUMINUM ALLOY, TITANIUM COLUMBIUM ALLOY, GENERAL SPECIFICATION FOR
    SAE AMS STD 2175 : 1998 CASTINGS, CLASSIFICATION AND INSPECTION OF
    MIL STD 1310 : H SHIPBOARD BONDING, GROUNDING, AND OTHER TECHNIQUES FOR ELECTROMAGNETIC COMPATIBILITY, ELECTROMAGNETIC PULSE (EMP) MITIGATION, AND SAFETY
    MIL PRF 27 : G TRANSFORMERS AND INDUCTORS (AUDIO, POWER, AND HIGH-POWER PULSE), GENERAL SPECIFICATION FOR
    MIL DTL 83517 : B CONNECTOR, COAXIAL, RADIO FREQUENCY FOR COAXIAL, STRIP OR MICROSTRIP TRANSMISSION LINE, GENERAL SPECIFICATION FOR
    FED STD H28/2 : B SCREW-THREAD STANDARDS FOR FEDERAL SERVICES SECTION 2 UNIFIED INCH SCREW THREADS- UN AND UNR THREAD FORMS
    MIL STD 276 : A IMPREGNATION OF POROUS METAL CASTINGS AND POWDERED METAL COMPONENTS
    NEMA RE 2 : 1999 ELECTRICAL INSULATING VARNISH
    AWS D17.1 : 2001 SPECIFICATION FOR FUSION WELDING FOR AEROSPACE APPLICATIONS
    MIL DTL 38999 : M CONNECTORS, ELECTRICAL, CIRCULAR, MINIATURE, HIGH DENSITY, QUICK DISCONNECT (BAYONET, THREADED OR BREECH COUPLING), ENVIRONMENT RESISTANT WITH CRIMP REMOVABLE CONTACTS OR HERMETICALLY SEALED WITH FIXED, SOLDERABLE CONTACTS, GENERAL SPECIFICATION FOR
    MIL B 8948 : A BEARINGS, PLAIN, ROD END, TFE LINED, SELF-ALIGNING
    SAE AS 8879 : 2004 SCREW THREADS - UNJ PROFILE, INCH CONTROLLED RADIUS ROOT WITH INCREASED MINOR DIAMETER
    MIL DTL 55181 : F CONNECTORS, PLUG AND RECEPTACLE, INTERMEDIATE POWER (ELECTRICAL, WATERPROOF), TYPE MW, GENERAL SPECIFICATION FOR
    FF W 100 : C WASHER, LOCK, TOOTH
    MIL-I-22076B:1963 INSULATION TUBING, ELECTRICAL, NONRIGID, VINYL, VERY LOW TEMPERATURE GRADE
    MIL DTL 16878 : H WIRE, ELECTRICAL, INSULATED, GENERAL SPECIFICATION FOR
    SAE AS 7928 : 2011 TERMINALS, LUG: SPLICES, CONDUCTOR: CRIMP STYLE, COPPER, GENERAL SPECIFICATION FOR
    SAE AS 50861 : 2011 WIRE, ELECTRIC, POLYVINYL CHLORIDE INSULATED, COPPER OR COPPER ALLOY
    FF S 200 : B SETSCREWS: HEXAGON SOCKET AND SPLINE SOCKET, HEADLESS
    NFPA 70 : 2017 NATIONAL ELECTRICAL CODE
    MIL DTL 28748 : D CONNECTOR, PLUG AND RECEPTACLE, RECTANGULAR, RACK AND PANEL SOLDER TYPE AND CRIMP TYPE CONTACTS - GENERAL SPECIFICATION FOR
    CFR 29(PT1910.1000 TO END) : 0 LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR
    ASME B18.6.3 : 2013 MACHINE SCREWS, TAPPING SCREWS, AND METALLIC DRIVE SCREWS (INCH SERIES)
    FF R 556 : D RIVET, SOLID, SMALL, RIVET, SPLIT, SMALL, RIVET TUBULAR SMALL, FLAT WASHER (BURR) AND CAP RIVET, GENERAL PURPOSE
    IEEE C95.1 : 2005 SAFETY LEVELS WITH RESPECT TO HUMAN EXPOSURE TO RADIO FREQUENCY ELECTROMAGNETIC FIELDS, 3 KHZ TO 300 GHZ
    MIL DTL 32139 : B CONNECTORS, ELECTRICAL, RECTANGULAR, NANOMINIATURE, POLARIZED SHELL, GENERAL SPECIFICATION FOR
    NAS 498 : 0 FASTENERS, ALLOY STEEL EXTERNALLY THREADED, 95 KSI FSU, 450 DEGREES F
    MIL HDBK 1547 : A ELECTRONIC PARTS, MATERIALS, AND PROCESSES FOR SPACE AND LAUNCH VEHICLES
    MMPDS 02 : 2005 METALLIC MATERIALS PROPERTIES DEVELOPMENT AND STANDARDIZATION (MMPDS)
    MIL PRF 15305 : F COILS, ELECTRICAL, FIXED AND VARIABLE, RADIO FREQUENCY, GENERAL SPECIFICATION FOR
    ANSI N2.1 : 1989 RADIATION SYMBOL
    ASME B18.6.7M : 1999R2010 METRIC MACHINE SCREWS
    SAE AS 27212 : 2011 TERMINAL BOARD ASSEMBLY, MOLDED-IN-STUD, ELECTRIC
    A A 59125 : B TERMINAL BOARDS, MOLDED, BARRIER SCREW AND STUD TYPES AND ASSOCIATED ACCESSORIES
    FF W 84 : A WASHER, LOCK (SPRING)
    MIL STD 1472 : G HUMAN ENGINEERING
    MIL PRF 83446 : D COILS, RADIO-FREQUENCY, CHIP, FIXED OR VARIABLE, GENERAL SPECIFICATION FOR
    ASTM A 449 : 2014 : REDLINE Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use
    ASME B18.3 : 2012 SOCKET CAP, SHOULDER, SET SCREWS, AND HEX KEYS (INCH SERIES)
    SAE AMS A 8576 : 2016 ADHESIVE, ACRYLIC BASE, FOR ACRYLIC PLASTIC
    A A 59770 : A INSULATION TAPE, ELECTRICAL, PRESSURE SENSITIVE ADHESIVE AND PRESSURE SENSITIVE THERMOSETTING ADHESIVE
    MIL HDBK 198 : B CAPACITORS, SELECTION AND USE OF
    MIL P 642 : D PLUG, TELEPHONE AND ACCESSORY SCREWS, GENERAL SPECIFICATION FOR
    FF S 92 : C SCREW, MACHINE, SLOTTED, CROSS-RECESSED OR HEXAGON HEAD
    ASME B18.2.1 : 2012 SQUARE, HEX, HEAVY HEX, AND ASKEW HEAD BOLTS AND HEX, HEAVY HEX, HEX FLANGE, LOBED HEAD, AND LAG SCREWS (INCH SERIES)
    MIL HDBK 512 : A PARTS MANAGEMENT
    MMM A 132 : B ADHESIVES, HEAT RESISTANT, AIRFRAME STRUCTURAL, METAL TO METAL
    MMM A 181 : D ADHESIVE PHENOL RESORCINOL OR MELAMINE BASE
    AIAA R 100 : A 2001 RECOMMENDED PRACTICE FOR PARTS MANAGEMENT
    MIL STD 202 : H ELECTRONIC AND ELECTRICAL COMPONENT PARTS
    MIL C 29600 : 0 CONNECTORS, ELECTRICAL, CIRCULAR, MINIATURE, COMPOSITE, HIGH DENSITY, QUICK COUPLING, ENVIRONMENT RESISTANT, REMOVABLE, CRIMP CONTACTS, ASSOCIATED HARDWARE GENERAL SPECIFICATION FOR
    MIL DTL 21617 : B CONNECTORS, PLUG AND RECEPTACLE, ELECTRICAL, RECTANGULAR, POLARIZED SHELL, MINIATURE TYPE, GENERAL SPECIFICATION FOR
    SAE AMS 3654E : 2016(S2018) TUBING, ELECTRICAL INSULATION, LIGHT WALL, EXTRUDED POLYTETRAFLUOROETHYLENE (PTFE)
    MIL PRF 39010 : E COIL, RADIO FREQUENCY, FIXED, MOLDED, ESTABLISHED RELIABILITY AND NONESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR
    MIL PRF 49142 : B CONNECTOR, TRIAXIAL, RADIO FREQUENCY, GENERAL SPECIFICATION FOR
    MIL HDBK 691 : B ADHESIVE BONDING
    MIL PRF 21038 : F TRANSFORMERS, PULSE, LOW POWER GENERAL SPECIFICATION FOR
    MIL DTL 18240 : F FASTENER ELEMENT, SELF-LOCKING, THREADED FASTENER, 250 DEGREES F MAXIMUM
    MIL J 641 : E JACK, TELEPHONE, GENERAL SPECIFICATION FOR
    MIL STD 981 : C DESIGN, MANUFACTURING AND QUALITY STANDARDS FOR CUSTOM ELECTROMAGNETIC DEVICES FOR SPACE APPLICATIONS
    MIL STD 22 : D WELDED JOINT DESIGN
    L P 516 : A PLASTIC SHEET AND PLASTIC ROD, THERMOSETTING, CAST
    EIA 297 : A1970 CABLE CONNECTORS FOR AUDIO FACILITIES FOR RADIO BROADCASTING
    MIL I 24391 : C INSULATION TAPE, ELECTRICAL, PLASTIC, PRESSURE SENSITIVE
    MIL HDBK 1277 : 0 SPLICES, CHIPS, TERMINALS, TERMINAL BOARDS, BINDING POSTS, ELECTRICAL
    ASTM D 1000 : 2017 : REDLINE Standard Test Methods for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications
    MIL I 631 : D INSULATION, ELECTRICAL, SYNTHETIC - RESIN COMPOSITION, NONRIGID
    NAS 1687 : 0 RIVET, BLIND, NICKEL-COPPER AND NICKEL ALLOY, MECHANICALLY LOCKED SPINDLE, BULBED
    MIL R 7885 : D RIVET, BLIND, STRUCTURAL, MECHANICALLY LOCKED SPINDLE AND FRICTION LOCKED SPINDLE, GENERAL SPECIFICATION FOR
    SAE AMS 3655D :2016 TUBING, ELECTRICAL INSULATION, THIN WALL, EXTRUDED POLYTETRAFLUOROETHYLENE (PTFE)
    MIL STD 681 : F IDENTIFICATION CODING AND APPLICATION OF HOOKUP AND LEAD WIRE
    NEMA FI 3 : 2004 CALENDERED ARAMID PAPERS USED FOR ELECTRICAL INSULATION
    NASM 22978 : 0 FASTENER, ROTARY, QUICK-OPERATING, HIGH-STRENGTH
    MIL B 8943 : A BEARINGS, JOURNAL - PLAIN AND FLANGED, TFE-LINED
    MIL DTL 39024 : C JACK, TIP (TEST POINT, PANEL OR PRINTED WIRING TYPE), GENERAL SPECIFICATION FOR
    MIL T 55631 : 0 TRANSFORMER, INTERMEDIATE FREQUENCY, RADIO FREQUENCY, AND DISCRIMINATOR, GENERAL SPECIFICATION FOR
    MMM A 189 : C ADHESIVE SYNTHETIC RUBBER THERMOPLASTIC GENERAL PURPOSE
    A A 59551 : A WIRE, ELECTRICAL, COPPER (UNINSULATED)
    A A 3097 : 0 ADHESIVES, CYANOACRYLATE, RAPID ROOM TEMPERATURE-CURING, SOLVENTLESS
    FF S 85 : D SCREW, CAP, SLOTTED AND HEXAGON HEAD
    MIL R 24243 C : 1994 RIVET, BLIND, NON-STRUCTURAL, RETAINED MANDREL, GENERAL SPECIFICATION FOR
    ASME B18.24 : 2015 PART IDENTIFYING NUMBER (PIN) CODE SYSTEM STANDARD FOR B18 FASTENER PRODUCTS
    NAS 547 : 0 FASTENER, ROTARY, QUICK-OPERATING, HIGH STRENGTH
    MIL STD 1425 : A SAFETY DESIGN REQUIREMENTS FOR MILITARY LASERS AND ASSOCIATED SUPPORT EQUIPMENT
    NASM 6812 : 0 FASTENERS, EXTERNALLY THREADED, ALLOY STEEL, CORROSION RESISTANT STEEL, ALUMINUM, 60,000 PSI TO 125,000 PSI
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective