UL 1993:5ED 2017-01
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Self-Ballasted Lamps and Lamp Adapters
Hardcopy
11-17-2021
01-27-2017
Preface
1 Scope
2 Reference Publications
3 Definitions
4 General Requirements
5 Mechanical Construction
6 Electrical Construction
7 Environmental Locations
8 Tests
9 Test Apparatus
10 Device Markings
SUPPLEMENT SA - SUPPLEMENTAL REQUIREMENTS FOR LIGHT-EMITTING
DIODES (LED)
SUPPLEMENT SB - ADDITIONAL REQUIREMENTS FOR SOLID-STATE LAMPS
CONTAINING SILICONE FLUID
SUPPLEMENT SC - ADDITIONAL REQUIREMENTS FOR LED LAMPS AND
FLUORESCENT LAMP ADAPTERS INTENDED AS DIRECT
REPLACEMENTS FOR FLUORESCENT LAMPS
ANNEX A (normative) - Standards for Components
ANNEX B (CAN) (normative) - Markings - French Translations
ANNEX C (MEX) (normative) - Markings - Spanish Translations
ANNEX D (normative) - Manufacturing and Production Tests
ANNEX E (CAN) (normative) - Printed Circuit Boards
ANNEX F (informative) - Pictograms
ANNEX G (informative) - Metric Conversion Information
Describes both self-ballasted lamps and self-ballasted lamp adapters rated 120 to 347 V AC nominal for connection to screw-base, pin-base, or recessed single contact (RSC or R7) lampholders.
DevelopmentNote |
Also numbered as CSA C22.2.1993. (09/2009) Also numbered as NMX-J-578/1-ANCE. (01/2013) NEW CHILD REV 3 2021 IS NOW ADDED.
|
DocumentType |
Standard
|
Pages |
0
|
ProductNote |
NEW CHILD REV 3 2021 IS NOW ADDED.
|
PublisherName |
Underwriters Laboratories
|
Status |
Superseded
|
NEMA LSD 68-2013 | REMOTE PHOSPHOR DEVICES USED IN LED LAMPS, ENGINES AND LUMINAIRES |
UFC 3-530-01 : Change 3 | UNIFIED FACILITIES CRITERIA - INTERIOR AND EXTERIOR LIGHTING SYSTEMS AND CONTROLS |
NEMA 410 : 2015 | PERFORMANCE TESTING FOR LIGHTING CONTROLS AND SWITCHING DEVICES WITH ELECTRONIC DRIVERS AND DISCHARGE BALLASTS |
ANSI C78.5 : 2003(R2008) | ELECTRIC LAMPS - SPECIFICATIONS FOR PERFORMANCE OF SELF-BALLASTED COMPACT FLUORESCENT LAMPS |
ANSI C82.12-1999 | LAMP BALLASTS - FLUORESCENT ADAPTERS |
NEMA SSL 4:2012 | Retrofit Lamps—Minimum Performance Requirements |
C22.2 NO. 43-17 | Lampholders (Binational standard with UL 496) |
NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
UL 935:10ED 2001-05 | Fluorescent-Lamp Ballasts |
UL 496:14ED 2017-09 | Lampholders |
IEC 61347-2-3:2011+AMD1:2016 CSV | Lamp control gear - Part 2-3: Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent lamps |
ANSI C81.62 : 2017 | ELECTRIC LAMPHOLDERS |
IEC 60238:2016+AMD1:2017 CSV | Edison screw lampholders |
CSA C22.2 No. 223 : 2015 | POWER SUPPLIES WITH EXTRA-LOW-VOLTAGE CLASS 2 OUTPUTS |
UL 5085-3:1ED 2006-04 | Low Voltage Transformers - Part 3: Class 2 and Class 3 Transformers |
IEC 61048:2006+AMD1:2015 CSV | Auxiliaries for lamps - Capacitors for use in tubular fluorescent and other discharge lamp circuits - General and safety requirements |
C22.1-15 | Canadian Electrical Code, Part I (23rd Edition), Safety Standard for Electrical Installations |
CSA C22.2 No. 60065 : 2016 | AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS |
CSA C22.2 No. 49 : 2014 | FLEXIBLE CORDS AND CABLES |
UL 506:14ED 2017-06 | Specialty Transformers |
ANSI C78.81:2016 | American National Standard for Electric Lamps—Double-Capped Fluorescent Lamps—Dimensional and Electrical Characteristics |
IEC 61347-2-9:2012 | Lamp controlgear - Part 2-9: Particular requirements for electromagnetic controlgear for discharge lamps (excluding fluorescent lamps) |
UL 935:10ED 2001-05 | Fluorescent-Lamp Ballasts |
UL 83:16ED 2017-07 | Standard for Thermoplastic-Insulated Wires and Cables |
ANSI C81.61 : 2017 | ELECTRIC LAMP BASES - SPECIFICATIONS FOR BASES (CAPS) FOR ELECTRIC LAMPS |
NFPA 704 : 2017 | STANDARD SYSTEM FOR THE IDENTIFICATION OF THE HAZARDS OF MATERIALS FOR EMERGENCY RESPONSE |
IEC 60400:2017 | Lampholders for tubular fluorescent lamps and starterholders |
C22.2 NO. 43-17 | Lampholders (Binational standard with UL 496) |
CSA C22.2 No. 250.13 : 2017 | LIGHT EMITTING DIODE (LED) EQUIPMENT FOR LIGHTING APPLICATIONS |
IEC 60227-1:2007 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 1: General requirements |
IEC 61347-2-4:2000 | Lamp controlgear - Part 2-4: Particular requirements for d.c. supplied electronic ballasts for general lighting |
ASTM D 1525 : 2017 | Standard Test Method for Vicat Softening Temperature of Plastics |
IEC 60085:2007 | Electrical insulation - Thermal evaluation and designation |
IEC 61558-1:2017 | Safety of transformers, reactors, power supply units and combinations thereof - Part 1: General requirements and tests |
ISA MC96.1 : 1982 | TEMPERATURE MEASUREMENT THERMOCOUPLES |
UL 101:6ED 2017-07 | Leakage Current for Utilization Equipment |
IEC 62035:2014+AMD1:2016 CSV | Discharge lamps (excluding fluorescent lamps) - Safety specifications |
ANSI C82.3-2016 | American National Standard for Reference Ballasts for Fluorescent Lamps |
CSA C22.2 No. 0.15 : 2015 | ADHESIVE LABELS |
NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
ASTM D 93 : 2016-07 | TEST METHODS FOR FLASH POINT BY PENSKY-MARTENS CLOSED CUP TESTER |
ANSI C78.375 : A2014 | ELECTRIC LAMPS - FLUORESCENT LAMPS - GUIDE FOR ELECTRICAL MEASURES |
CSA C22.2 No. 210 : 2015 | APPLIANCE WIRING MATERIAL PRODUCTS |
CSA C22.2 No. 127 : 2015 | EQUIPMENT AND LEAD WIRES |
UL 746A:6ED 2012-09 | Polymeric Materials - Short Term Property Evaluations |
UL 60730-1:5ED 2016-08 | Automatic Electrical Controls - Part 1: General Requirements |
CSA C22.2 No. 74 : 2016 | EQUIPMENT FOR USE WITH ELECTRIC DISCHARGE LAMPS |
ANSI C78.24:2001 | American National Standard for Electric Lamps—Two-inch (51 mm) Integral-Reflector Lamps with Front Covers and GU5.3 or GX5.3 Bases |
UL 1577:5ED 2014-04 | Optical Isolators |
CSA C22.2 No. 256 : 2014 | DIRECT PLUG-IN NIGHTLIGHTS |
ASTM D 1000 : 2017 : REDLINE | Standard Test Methods for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications |
UL 496:14ED 2017-09 | Lampholders |
CSA E60384.14 : 2014 | FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 14: SECTIONAL SPECIFICATION - FIXED CAPACITORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION AND CONNECTION TO THE SUPPLY MAINS |
IEC 61347-2-8:2000+AMD1:2006 CSV | Lamp controlgear - Part 2-8: Particular requirements for ballasts for fluorescent lamps |
IEC 61184:2017 | Bayonet lampholders |
ANSI C78.901:2016 | American National Standard for Electric Lamps—Single-Based Fluorescent Lamps—Dimensional and Electrical Characteristics |
ANSI C81.63 : 2007(R2014) | GAUGES FOR ELECTRIC LAMP BASES AND LAMPHOLDERS |
UL 2097:4ED 2006-12 | Reference Standard for Double Insulation Systems for Use in Electronic Equipment |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.