|
MIL P 52977 : 0
|
PRIMER COATING, ALKYD, ANTICORROSIVE, LEAD AND CHROMATE FREE |
|
ASTM D 3205 : 1986 : R1991
|
Standard Test Method for Viscosity of Asphalt with Cone and Plate Viscometer (Withdrawn 2000) |
|
API RP 754 : 2016
|
PROCESS SAFETY PERFORMANCE INDICATORS FOR THE REFINING AND PETROCHEMICAL INDUSTRIES |
|
CSA Z752 : 2003 : R2013
|
DEFINITION OF HOUSEHOLD HAZARDOUS WASTE |
|
DOD E 18214 : B
|
ENAMEL, INTERIOR, DECK, DARK GREEN (FORMULA NO. 19) (METRIC) |
|
DIN EN 16900 E : 2017
|
FAST PYROLYSIS BIO-OILS FOR INDUSTRIAL BOILERS - REQUIREMENTS AND TEST METHODS |
|
DEFSTAN 91-86/6(2009) : 2009
|
TURBINE FUEL, AVIATION KEROSINE TYPE: HIGH FLASH TYPE, CONTAINING FUEL SYSTEM ICING INHIBITOR NATO CODE: F-44 JSD: AVCAT/FSII |
|
ASTM D 4865 : 2009 : R2014
|
Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems |
|
DOD E 1265 : D
|
ENAMEL, EXTERIOR, ALKYD, OCEAN GRAY No.17 (FORMULA No 5.0) METRIC |
|
SAE AMS 2644 : 2013
|
INSPECTION MATERIAL, PENETRANT |
|
MIL STD 1548 : H
|
INTO - PLANE SERVICING OF FUELS AT COMMERCIAL AIRPORTS |
|
DOD E 24635 : (1)
|
ENAMEL, GRAY, SILICONE ALKYD COPOLYMER SEMIGLOSS (FOR EXTERIOR USE) (METRIC) |
|
NFPA 32 : 2016
|
DRYCLEANING FACILITIES |
|
MIL DTL 83133 : J
|
TURBINE FUEL, AVIATION, KEROSENE TYPE, JP-8 (NATO F-34), NATO F-35, AND JP-8+100 (NATO F-37) |
|
13/30279896 DC : 0
|
BS ISO 8178-5 - RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - PART 5: TEST FUELS |
|
DOD P 24631 : (1) SUPP 1
|
PAINT, CAMOUFLAGE FOR SUBMARINES, GENERAL SPECIFICATION FOR (METRIC) |
|
MIL F 24951 : B
|
FUEL OIL RECLAIMED |
|
DOD P 15144 : B
|
PAINT, FORMULA NO. 34 (BINDER FOR ANTI SWEAT COATINGS) (METRIC) |
|
MIL T 36385 : C
|
TESTER, FLASH POINT, CLOSED TYPE 115 VOLT, 60 HZ AC |
|
PD CEN/TR 17103:2017
|
PETROLEUM AND RELATED PRODUCTS - FAST PYROLYSIS BIO-OILS FOR STATIONARY INTERNAL COMBUSTION ENGINES - QUALITY DETERMINATION |
|
MIL PRF 81309 : G
|
CORROSION PREVENTIVE COMPOUNDS, WATER DISPLACING, ULTRA-THIN FILM |
|
ASTM F 1201 : 1988 : R2016
|
Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0°F |
|
SAE AMS 1640 : 2011
|
CORROSION REMOVING COMPOUND, FOR AIRCRAFT SURFACES |
|
DOD F 87935 : 0
|
FLUID, MAGNETIC PARTICLE INSPECTION, SUSPENSION MEDIUM (METRIC) |
|
MIL DTL 16884 : P
|
FUEL, NAVAL DISTILLATE |
|
MIL PRF 32177 : A
|
CLEANING COMPOUND, NONSKID |
|
CSA M423 : 1987 : R2011
|
FIRE RESISTANT HYDRAULIC FLUIDS |
|
CSA M423 : 1987 : R2007
|
FIRE RESISTANT HYDRAULIC FLUIDS |
|
IEEE C57.154-2012
|
DESIGN, TESTING, AND APPLICATION OF LIQUID-IMMERSED DISTRIBUTION, POWER, AND REGULATING TRANSFORMERS USING HIGH-TEMPERATURE INSULATION SYSTEMS AND OPERATING AT ELEVATED TEMPERATURES |
|
SAE AMS 1428 : 2017
|
FLUID, AIRCRAFT DEICING/ANTI-ICING, NON-NEWTONIAN, (PSEUDOPLASTIC), SAE TYPES 2, 3 AND 4 |
|
SAE AIR 810 : 2013
|
DEGRADATION LIMITS OF HYDROCARBON-BASED HYDRAULIC FLUIDS, MIL-PRF-5606, MIL-PRF-83282, AND MIL-PRF-87257 USED IN HYDRAULIC TEST STANDS |
|
ASTM D 6361/D6361M : 1998 : R2010 : EDT 1
|
Standard Guide for Selecting Cleaning Agents and Processes |
|
API 1509 : 2002
|
ENGINE OIL LICENSING AND CERTIFICATION SYSTEM |
|
SAE AMS 1551 : 2008
|
CLEANER, TURBINE ENGINE GAS PATH AQUEOUS TYPE |
|
NFPA 497M : 1991
|
CLASSIFICATION OF GASES, VAPORS AND DUSTS FOR ELECTRICAL EQUIPMENT IN HAZARDOUS (CLASSIFIED) LOCATIONS |
|
ASTM D 8085 : 2017
|
Standard Specification for Non-Aqueous Engine Coolant for Automobile and Light-Duty Service |
|
ASTM D 3757 : 2016 : REDLINE
|
Standard Guide for Preparing Specifications for Solvent-based Floor Polishes |
|
ASTM D 6577 : 2015 : REDLINE
|
Standard Guide for Testing Industrial Protective Coatings |
|
ASTM D 6823 : 2008
|
Standard Specification for Commercial Boiler Fuels With Used Lubricating Oils |
|
ASTM D 8046 : 2016
|
Standard Guide for Pumpability of Heat Transfer Fluids |
|
ASTM D 8048 : 2017-05
|
TEST METHOD FOR EVALUATION OF DIESEL ENGINE OILS IN T-13 DIESEL ENGINE |
|
ASTM E 502 : 2007 : R2013
|
Standard Test Method for Selection and Use of ASTM Standards for the Determination of Flash Point of Chemicals by Closed Cup Methods |
|
ASTM F 2701 : 2008
|
Standard Test Method for Evaluating Heat Transfer through Materials for Protective Clothing Upon Contact with a Hot Liquid Splash (Withdrawn 2017) |
|
ASTM C 647 : 2008
|
Standard Guide to Properties and Tests of Mastics and Coating Finishes for Thermal Insulation |
|
ASTM D 6985 : 2004
|
Standard Specification for Middle Distillate Fuel Oil-Military Marine Applications |
|
ASTM D 3105 : 2017 : REDLINE
|
Standard Index of Methods for Testing Elastomeric and Plastomeric Roofing and Waterproofing Materials |
|
ASTM D 6114 : 1997 : R2002
|
Standard Specification for Asphalt-Rubber Binder |
|
ASTM D 8175 : 2018
|
Standard Test Method for Finite Flash Point Determination of Liquid Wastes by Pensky-Martens Closed Cup Tester |
|
NFPA 30 HDBK : 2018
|
FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE HANDBOOK |
|
MIL-DTL-83133K:2018
|
TURBINE FUEL, AVIATION, KEROSENE TYPE, JP-8 (NATO F-34), NATO F-35, AND JP-8+100 (NATO F-37) |
|
NFPA 30 : 2018
|
FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE |
|
NFPA 30A : 2018
|
MOTOR FUEL DISPENSING FACILITIES AND REPAIR GARAGES |
|
NFPA 122 : 2015
|
FIRE PREVENTION AND CONTROL IN METAL/NONMETAL MINING AND METAL MINERAL PROCESSING FACILITIES |
|
NFPA 35 : 2016
|
MANUFACTURE OF ORGANIC COATINGS |
|
NFPA 90B : 2018
|
INSTALLATION OF WARM AIR HEATING AND AIR-CONDITIONING SYSTEMS |
|
NFPA 33 : 2018
|
SPRAY APPLICATION USING FLAMMABLE OR COMBUSTIBLE MATERIALS |
|
NFPA 34 : 2018
|
DIPPING, COATING, AND PRINTING PROCESSES USING FLAMMABLE OR COMBUSTIBLE LIQUIDS |
|
CEN/TR 15138:2005
|
Petroleum products and other liquids - Guide to flash point testing |
|
ICC 2015 INT. SOLAR ENERGY PRO. & COMM. : 2015
|
2015 (ISEP[TM]) INTERNATIONAL SOLAR ENERGY PROVISIONS[TM] COMMENTARY |
|
DEFSTAN 91-035/4(2018) : 2018
|
HYDRAULIC FLUID, PETROLEUM: EMULSIFYING, ANTI-WEAR JOINT SERVICE DESIGNATION: OX-30 |
|
DEFSTAN 68-251/3(2007) : 2007
|
FUEL SOLUBLE LUBRICITY IMPROVING ADDITIVES FOR AVIATION TURBINE FUELS, NATO CODE: S-1747 JOINT SERVICE DESIGNATION: AL-61 |
|
DEFSTAN 68-251/2(2001) : 2001
|
FUEL SOLUBLE LUBRICITY IMPROVING ADDITIVES FOR AVIATION TURBINE FUELS NATO CODE: S-1747 JOINT SERVICE DESIGNATION: AL-61 |
|
DEFSTAN 91-039/4(2018) : 2018
|
HYDRAULIC FLUID, PETROLEUM: ANTI-WEAR NATO CODE NO: H-576 JOINT SERVICE DESIGNATION: OM-33 |
|
DEFSTAN 91-70/1(1990) : 1990
|
CUTTING FLUID, SOLUBLE, BIOSTABLE - JOINT SERVICE DESIGNATION ZX-9 |
|
NFPA 704 : 2017
|
STANDARD SYSTEM FOR THE IDENTIFICATION OF THE HAZARDS OF MATERIALS FOR EMERGENCY RESPONSE |
|
ANSI Z400.1/Z129.1 : 2010
|
HAZARDOUS WORKPLACE CHEMICALS - HAZARD EVALUATION AND SAFETY DATA SHEET AND PRECAUTIONARY LABELING PREPARATION |
|
ASTM D 7468 : 2016 : REDLINE
|
TEST METHOD FOR CUMMINS ISM TEST |
|
ASTM D 8125 : 2017
|
Standard Specification for Re-Refined Engine Oil Bottoms (REOB)/Vacuum Tower Asphalt Extender (VTAE) |
|
ASTM D 3941 : 2015-02
|
TEST METHOD FOR FLASH POINT BY THE EQUILIBRIUM METHOD WITH A CLOSED-CUP APPARATUS |
|
ASTM D 6217 : 2011
|
Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration |
|
MIL C 83231 : A
|
COATING, POLYURETHANE, RAIN EROSION RESISTANT FOR EXTERIOR AIRCRAFT AND MISSILE PLASTIC PARTS |
|
MIL C 10382 : D
|
CORROSION PREVENTIVE, PETROLATUM, SPRAYING APPLICATION: FOR FOOD HANDLING MACHINERY AND EQUIPMENT |
|
DEFSTAN 91-4/9(2013) : 2013
|
FUEL, NAVAL, DISTILLATE NATO CODE: F-76 JOINT SERVICE DESIGNATION DIESO F-76 |
|
MIL PRF 32490 : 0
|
ADDITIVE, LUBRICITY IMPROVER, DIESEL |
|
MIL DTL 25524 : F
|
TURBINE FUEL, AVIATION, THERMALLY STABLE (JPTS) |
|
DOD E 700 : A
|
ENAMEL, DECK, INTERIOR, GRAY (FORMULA NO.20L) (METRIC) |
|
MIL P 85658 : 0
|
PAINT, WATER DISPLACING |
|
MIL P 24351 : A
|
PRIMER COATING, ALKYD, BLUE (FORMULA NO. 6N35-2) |
|
SAE AMS 1426 : 2016
|
FLUID, DEICING/ANTI-ICING, RUNWAYS AND TAXIWAYS GLYCOL BASE |
|
MIL I 24718 : 0
|
INSULATING RESINS, SOLVENTLESS, VACUUM-PRESSURE-IMPREGNATING - GENERAL SPECIFICATION FOR |
|
11/30239977 DC : 0
|
BS EN 16245-2 - FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 2: ADDITIONAL REQUIREMENTS FOR RESINS, CURING SYSTEMS, ADDITIVES AND MODIFIERS |
|
MIL PRF 6083 : G
|
HYDRAULIC FLUID, PETROLEUM BASE, FOR PRESERVATION AND OPERATION |
|
MIL T 83133 : D
|
TURBINE FUELS, AVIATION, KEROSENE TYPES, NATO F-34 (JP-8) AND NATO F-35 |
|
MIL H 6083 : E
|
HYDRAULIC FLUID, PETROLEUM BASE, FOR PRESERVATION AND OPERATION |
|
DEFSTAN 91-21/3(1989) : 1989
|
LUBRICATING OIL, COMPOUNDED NATO CODE: 0-254 JOINT SERVICE DESIGNATION: OC-160 |
|
MIL PRF 38219 : C
|
TURBINE FUEL, LOW VOLATILITY, JP-7 |
|
MIL PRF 85570 : E
|
CLEANING COMPOUNDS, AIRCRAFT, EXTERIOR |
|
I.S. EN 16900:2017
|
FAST PYROLYSIS BIO-OILS FOR INDUSTRIAL BOILERS - REQUIREMENTS AND TEST METHODS |
|
ASTM D 6361 : 1998
|
Standard Guide for Selecting Cleaning Agents and Processes |
|
MIL H 5606 : G
|
HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT; MISSILE AND ORDNANCE |
|
ASTM D 88 : 2007 : R2013
|
Standard Test Method for Saybolt Viscosity |
|
MIL HDBK 510 : A
|
AEROSPACE FUELS CERTIFICATION |
|
MIL T 5624 : R
|
TURBINE FUEL, AVIATION, GRADES JP 4 AND JP 5 |
|
MIL PRF 5624 : S
|
TURBINE FUEL, AVIATION, GRADES JP-4, JP-5 AND JP-5/JP-8 ST |
|
MIL C 87936 : A
|
CLEANING COMPOUNDS, AIRCRAFT EXTERIOR SURFACES, WATER DILUTABLE |
|
MIL-DOD-P-24555:1977
|
PAINT, ALUMINUM, HEAT-RESISTING (650 DEGREE C), LOW-EMISSIVITY (0.40 OR LESS) (METRIC) |
|
BS EN 16900:2017
|
Fast pyrolysis bio-oils for industrial boilers. Requirements and test methods |
|
TT P 1565 : B
|
PAINT, BOOT TOPPING BLACK |
|
MIL S 53018 : 0
|
SEALER, WELD THROUGH FOR OVERLAPPING SURFACES |
|
ASTM D 3730 : 2017 : REDLINE
|
Standard Guide for Testing High-Performance Interior Architectural Wall Coatings |
|
SAE AIR 81 : 2016
|
IMPORTANCE OF PHYSICAL AND CHEMICAL PROPERTIES OF AIRCRAFT HYDRAULIC FLUIDS |
|
TT E 490 : E
|
ENAMEL, SILICONE ALKYD COPOLYMER, SEMIGLOSS (FOR EXTERIOR & INTERIOR NON RESIDENTIAL USE) |
|
MIL F 46162 : D
|
FUEL, DIESEL, REFEREE GRADE |
|
VV P 216 : C
|
PENETRATING OIL (FOR LOOSENING FROZEN METALLIC PARTS) |
|
DOD P 24655 : 0
|
PAINT, UNDERWATER HULL, ANTICORROSION (METRIC) |
|
DOD E 1115 : C
|
ENAMEL, INTERIOR, ALKYD, WHITE [FORMULA NO.30] METRIC |
|
MIL PRF 38299 : E
|
FLUID, PURGING, FOR PRESERVING FUEL TANKS OF JET AIRCRAFT |
|
MIL DTL 32353 : A
|
HYDRAULIC & LUBRICATING OIL, SYNTHETIC HYDROCARBON BASE |
|
O L 172 : A
|
LEATHER DRESSING, VESICANT GAS RESISTANT |
|
ISO/TR 29662:2009
|
Petroleum products and other liquids Guidance for flash point testing |
|
MIL DTL 87107 : E
|
PROPELLANT, HIGH DENSITY SYNTHETIC HYDROCARBON TYPE, GRADE JP-10 |
|
MIL DTL 38219 : D
|
TURBINE FUEL, LOW VOLATILITY, JP-7 |
|
MIL P 22298 : A
|
PAINT, BLACK, POLYISOBUTYLENE (FORMULA NO. 133) |
|
A A 54509 : 0
|
TESTER, FLASH POINT, CLOSED-TYPE (120 VOLT, 50/60 Hz, AC) |
|
AASHTO M 133 : 2012
|
SPECIFICATION FOR PRESERVATIVES AND PRESSURE TREATMENT PROCESSES FOR TIMBER |
|
DEFSTAN 91-99/1(1994) : INTERIM
|
LUBRICATING OIL, AIRCRAFT TURBINE ENGINE, PETROLEUM - NATO CODE: 0-135 JOINT SERVICE DESIGNATION: OM-11 |
|
NFPA FIRE PROT GUIDE ON HAZARDOUS MAT : 2010
|
FIRE PROTECTION GUIDE TO HAZARDOUS MATERIALS |
|
ASTM D 6468 : 2008 : R2013
|
Standard Test Method for High Temperature Stability of Middle Distillate Fuels |
|
NFPA 49 : 1994
|
HAZARDOUS CHEMICALS DATA |
|
SAE AMS 2641 : 2015
|
VEHICLE, MAGNETIC PARTICLE INSPECTION, PETROLEUM BASE |
|
ASTM D 7544 : 2012
|
Standard Specification for Pyrolysis Liquid Biofuel |
|
CGSB 25.1-2 : 1995
|
METHODS OF SAMPLING AND TESTING WAXES AND POLISHES - FLASH POINT |
|
NACE SP 04 87 : 2007
|
CONSIDERATIONS IN THE SELECTION AND EVALUATION OF RUST PREVENTIVES AND VAPOR CORROSION INHIBITORS FOR INTERIM (TEMPORARY) CORROSION PROTECTION |
|
ASTM D 6114 : 1997 : EDT 1
|
Standard Specification for Asphalt-Rubber Binder |
|
ASTM C 647 : 2008 : R2013
|
Standard Guide to Properties and Tests of Mastics and Coating Finishes for Thermal Insulation |
|
ASTM D 5967 : 2017 : REDLINE
|
Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine |
|
ASTM D 5290 : 1991
|
Standard Test Method for Measurement of Oil Consumption, Piston Deposits and Wear in a Heavy-Duty High Speed Diesel Engine-NTC-400 Procedure (Withdrawn 1997) |
|
ASTM D 268 : 2001 : R2007
|
Standard Guide for Sampling and Testing Volatile Solvents and Chemical Intermediates for Use in Paint and Related Coatings and Material |
|
ASTM D 4857 : 2012 : REDLINE
|
Standard Test Method for Determination of the Ability of Lubricants to Minimize Ring Sticking and Piston Deposits in Two-Stroke-Cycle Gasoline Engines Other Than Outboards |
|
ASTM D 6361/D6361M : 1998 : R2015
|
Standard Guide for Selecting Cleaning Agents and Processes |
|
ASTM D 6074 : 2015 : REDLINE
|
Standard Guide for Characterizing Hydrocarbon Lubricant Base Oils |
|
ASTM D 88 : 2007
|
Standard Test Method for Saybolt Viscosity |
|
ASTM D 6985 : 2004 : REV A
|
Standard Specification for Middle Distillate Fuel Oil-Military Marine Applications (Withdrawn 2010) |
|
DEFSTAN 68-252/3(2005) : 2005
|
FUEL SYSTEM ICING INHIBITOR NATO CODE: S-1745 JOINT SERVICE DESIGNATION: AL-41 |
|
ASTM F 718 : 2007 : R2011 : EDT 1
|
Standard Specification for Shipbuilders and Marine Paints and Coatings Product/Procedure Data Sheet |
|
ASTM D 3278 : 1996 : R2011
|
Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus (Withdrawn 2020) |
|
ASTM D 268 : 2001 : R2012
|
Standard Guide for Sampling and Testing Volatile Solvents and Chemical Intermediates for Use in Paint and Related Coatings and Material (Withdrawn 2021) |
|
ASTM D 333 : 2001 : R2007
|
Standard Guide for Clear and Pigmented Lacquers |
|
NFPA 90A : 2018
|
INSTALLATION OF AIR-CONDITIONING AND VENTILATING SYSTEMS |
|
NFPA 120 : 2015
|
FIRE PREVENTION AND CONTROL IN COAL MINES |
|
ICC 2012 INTERNATIONAL BUILDING CODE : 2012
|
INTERNATIONAL BUILDING CODE |
|
ASHRAE 26 : 2010
|
MECHANICAL REFRIGERATION AND AIR-CONDITIONING INSTALLATIONS ABOARD SHIP |
|
I.S. EN ISO 8178-5:1998
|
RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - PART 5: TEST FUELS |
|
NFPA 1 : 2021
|
FIRE CODE |
|
NFPA 99C : 2005
|
GAS AND VACUUM SYSTEMS |
|
ASME PV CODE 8 DIV 1 : 2017
|
BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 1 |
|
NEMA RE 2-1999
|
Electrical Insulating Varnish |
|
ASTM D 3955 : 2013 : REDLINE
|
Standard Specification for Electrical Insulating Varnishes |
|
NFPA 321 : 1991
|
BASIC CLASSIFICATION OF FLAMMABLE AND COMBUSTIBLE LIQUIDS |
|
DEFSTAN 91-86/4(2002) : 2002
|
TURBINE FUEL, AVIATION KEROSENE TYPE: HIGH FLASH TYPE, CONTAINING FUEL SYSTEM ICING INHIBITOR NATO CODE: F-44 JOINT SERVICE DESIGNATION: AVCAT/FSII |
|
17/30352715 DC : 0
|
BS IEC 60086-6 ED 1.0 - PRIMARY BATTERIES - PART 6: GUIDANCE ON ENVIRONMENTAL ASPECTS |
|
SAE J 183 : 2017
|
ENGINE OIL PERFORMANCE AND ENGINE SERVICE CLASSIFICATION (OTHER THAN 'ENERGY CONSERVING') |
|
MIL C 83873 : A
|
CLEANING COMPOUND, PRECOATING SURFACE, AIRCRAFT & AEROSPACE GROUND EQUIPMENT (AGE) |
|
MIL HDBK 510-1 : A
|
AEROSPACE FUELS CERTIFICATION |
|
MIL I 85470 : A
|
INHIBITOR, ICING, FUEL SYSTEM, HIGH FLASH |
|
ASTM F 1200 : 1988 : R2004
|
Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150°F) |
|
MIL PRF 23236 : D
|
COATING SYSTEMS FOR SHIP STRUCTURES |
|
VV F 800 : E
|
FUEL OIL, DIESEL |
|
A A 59693 : A
|
DIESEL FUEL, BIODIESEL BLEND (B20) |
|
DOD E 18210 : B
|
ENAMEL, INTERIOR, DECK, RED (FORMULA NO. 23) (METRIC) |
|
ASTM F 1201 : 1988 : R2004
|
Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0°F |
|
ASTM F 1201 : 1988 : R1998
|
Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0°F |
|
ASTM E 502 : 2007
|
Standard Test Method for Selection and Use of ASTM Standards for the Determination of Flash Point of Chemicals by Closed Cup Methods |
|
ASTM D 1859 : 1971 : R2000
|
Standard Specification for Petroleum Used for Blending with Creosote (Withdrawn 2006) |
|
MIL STD 3004 : D
|
QUALITY ASSURANCE/SURVEILLANCE FOR FUELS, LUBRICANTS AND RELATED PRODUCTS |
|
PD ISO/TR 11018:2001
|
Essential oils. General guidance on the determination of flashpoint |
|
MIL PRF 24951 : B
|
FUEL OIL RECLAIMED |
|
ASTM D 6894 : 2013 : REDLINE
|
Standard Test Method for Evaluation of Aeration Resistance of Engine Oils in Direct-Injected Turbocharged Automotive Diesel Engine |
|
AASHTO TP 102 : 2012
|
METHOD OF TEST FOR EVALUATION OF ASPHALT RELEASE AGENTS (ARAS) |
|
SAE J 1510 : 2017
|
LUBRICANTS FOR TWO-STROKE-CYCLE GASOLINE ENGINES |
|
MIL PRF 85704 : C
|
CLEANING COMPOUND, TURBINE ENGINE GAS PATH |
|
MIL F 16884 : J
|
FUEL, NAVAL DISTILLATE |
|
API PUBL 1629 : 1993
|
GUIDE FOR ASSESSING AND REMEDIATING PETROLEUM HYDROCARBONS IN SOILS |
|
NFPA 123 : 1999
|
FIRE PREVENTION AND CONTROL IN UNDERGROUND BITUMINOUS COAL MINES |
|
ASTM D 6448 : 2016 : REDLINE
|
Standard Specification for Industrial Burner Fuels from Used Lubricating Oils |
|
SAE AMS 3160 : 2016
|
SOLVENT, PETROLEUM |
|
NFPA 386 : 1990
|
PORTABLE SHIPPING TANKS FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS |
|
DEFSTAN 91-86/2(1997) : 1997
|
TURBINE FUEL, AVIATION: HIGH FLASH TYPE, CONTAINING FUEL SYSTEM ICING INHIBITOR - NATO CODE: F-44 - JOINT SERVICE DESIGNATION: AVCAT/FSII |
|
QPL 68-251 : ISSUE 1
|
QPL OF MATERIALS TO DEFENCE STANDARD 68-251 FUEL SOLUBLE PIPELINE CORROSION INHIBITORS/LUBRICITY IMPROVING ADDITIVES FOR AVIATION TURBINE FUELS |
|
SAE AMS 1548 : 2017
|
CLEANER, TURBINE ENGINE GAS PATH, SOLVENT EMULSION TYPE |
|
ASTM E 709 : 2015 : REDLINE
|
Standard Guide for Magnetic Particle Testing |
|
S.R. CEN/TR 17103:2017
|
FAST PYROLYSIS BIO-OILS FOR STATIONARY INTERNAL COMBUSTION ENGINES - QUALITY DETERMINATION |
|
SAE AMS 1377 : 2012
|
REMOVER, PAINT, EPOXY AND POLYURETHANE PAINT SYSTEM, NON-CHLORINATED SOLVENT |
|
ASTM D 3323 : 1980 : R1988 : EDT 1
|
Guide for Testing Interior Solvent-Thinned Flat Wall Paints (Withdrawn 1993) |
|
NFPA 921 : 2017
|
GUIDE FOR FIRE AND EXPLOSION INVESTIGATIONS |
|
ASTM D 7666 : 2012
|
Standard Specification for Triglyceride Burner Fuel |
|
ASTM D 333 : 2001 : R2013
|
Standard Guide for Clear and Pigmented Lacquers |
|
ASTM F 718 : 2007 : R2017
|
Standard Specification for Shipbuilders and Marine Paints and Coatings Product/Procedure Data Sheet |
|
ASTM D 4712 : 1987 : REV A : R1996
|
Standard Guide for Testing Industrial Water-Reducible Coatings |
|
ASTM D 2939 : 2003
|
Standard Test Methods for Emulsified Bitumens Used as Protective Coatings (Withdrawn 2012) |
|
ASTM D 2604 : 1986 : R2000
|
Standard Specification for High-Boiling Hydrocarbon Solvent for Preparing Oil-Borne Preservative Solutions (Withdrawn 2006) |
|
DIN EN 16900:2015-09 (Draft)
|
FAST PYROLYSIS BIO-OILS FOR INDUSTRIAL BOILERS - REQUIREMENTS AND TEST METHODS |
|
ISO 8178-5:2015
|
Reciprocating internal combustion engines Exhaust emission measurement Part 5: Test fuels |
|
ISO 18436-5:2012
|
Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of personnel — Part 5: Lubricant laboratory technician/analyst |
|
UL 1993 : 5
|
SELF-BALLASTED LAMPS AND LAMP ADAPTERS |
|
ASTM D 6813 : 2002 : REV A : R2007
|
Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps |
|
ICC 2012 INTERNATIONAL FIRE CODE : 2012
|
INTERNATIONAL FIRE CODE |
|
ASTM D 6813 : 2002
|
Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps |
|
ICC IMC Code and Commentary : 2015
|
IMC® Code and Commentary |
|
C22.2 NO. 1993-17
|
Self-ballasted lamps and lamp adapters (Trinational standard with NMX-J-578/1-ANCE and UL 1993) |
|
ICC IFC CODE & COMMENTARY VOLUME 1 & 2 : 2015
|
IFC® Code and Commentary |
|
ASTM D 6813 : 2002 : REV A : R2013
|
Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps (Withdrawn 2015) |
|
CSA B139 : 2015
|
INSTALLATION CODE FOR OIL-BURNING EQUIPMENT |
|
ASTM D 6813 : 2002 : REV A
|
Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps |
|
EN ISO 8178-5 : 1997
|
RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - TEST FUELS |
|
ASTM C 461 : 2017 : REDLINE
|
Standard Test Methods for Mastics and Coatings Used With Thermal Insulation |
|
ASTM D 7665 : 2017 : REDLINE
|
Standard Guide for Evaluation of Biodegradable Heat Transfer Fluids |
|
MIL PRF 62218 : B
|
CORROSION PREVENTIVE COMPOUNDS, COLD APPLICATION (FOR NEW AND FIELD MOTOR VEHICLES AND TRAILERS) |
|
MIL PRF 24596 : B
|
COATING COMPOUNDS, NONFLAMING, FIRE-RESISTANT |
|
DOD P 24648 : 0
|
PRIMER COATING, ZINC DUST PIGMENTED FOR EXTERIOR STEEL SURFACES (METRIC) |
|
MIL PRF 16884 : K
|
FUEL, NAVAL DISTILLATE |
|
CSA Z201 : 0
|
QUALIFICATION CODE FOR ONTARIO FOR LABORATORIES ANALYZING INDUSTRIAL WASTE |
|
ASTM D 6217 : 2011 : R2016
|
Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration |
|
ASTM D 803 : 2015 : REDLINE
|
Standard Test Methods for Testing Tall Oil |
|
MIL PRF 12048 : E
|
PETROLEUM TESTING KIT, GROUND FUELS |
|
MIL DTL 5624 : W
|
TURBINE FUEL, AVIATION, GRADES JP-4 AND JP-5 |
|
TT S 711 : C
|
STAIN, OIL TYPE, WOOD, INTERIOR |
|
MIL C 52947 : B
|
COAGULANT, WATER TREATMENT: POLYELECTROLYTE, CATIONIC, LIQUID |
|
API 3000 : 2014
|
CLASSIFYING AND LOADING OF CRUDE OIL INTO RAIL TANK CARS |
|
ASTM D 7215 : 2016 : REDLINE
|
Standard Test Method for Calculated Flash Point from Simulated Distillation Analysis of Distillate Fuels |
|
MMM A 002048 : 0
|
ADHESIVE FIRE RESISTANT THERMAL INSULATION |
|
DEFSTAN 91-17/2(1990) : 1990
|
GREASE, CALCIUM BASE JOINT SERVICE DESIGNATION LG-280 |
|
BS ISO 18436-5:2012
|
Condition monitoring and diagnostics of machines. Requirements for qualification and assessment of personnel Lubricant laboratory technician/analyst |
|
MIL PRF 11090 : K
|
CLEANING COMPOUND, DEGREASING AND DEPRESERVING SOLVENT |
|
SAE J 671 : 2014
|
VIBRATION DAMPING MATERIALS AND UNDERBODY COATINGS |
|
NFPA 497 : 2017
|
CLASSIFICATION OF FLAMMABLE LIQUIDS, GASES, OR VAPORS AND OF HAZARDOUS (CLASSIFIED) LOCATIONS FOR ELECTRICAL INSTALLATIONS IN CHEMICAL PROCESS AREAS |
|
MIL PRF 29602 : A
|
CLEANING COMPOUNDS, PARTS WASHER AND SPRAY CABINET |
|
MIL PRF 25017 : H
|
INHIBITOR, CORROSION/LUBRICITY IMPROVER, FUEL SOLUBLE (NATO S-1747) |
|
ASTM D 2069 : 1991 : R1998
|
Standard Specification for Marine Fuels (Withdrawn 2003) |
|
MIL P 82522 : C
|
PROPELLANT, JET ENGINE, T-H DIMER, GRADE RJ-4 |
|
DOD P 24647 : A (2)
|
PAINT, ANTIFOULING, SHIP HULL (METRIC) |
|
MIL P 15183 : B NOTICE 1
|
PAINT, EXTERIOR, ALKYD, GRAY, NO. 11 (FORMULA NO 109) (METRIC) |
|
TT W 568 : E
|
WOOD PRESERVATIVE - CREOSOTE-PETROLEUM SOLUTION |
|
ASTM F 718 : 2007
|
Standard for Shipbuilders and Marine Paints and Coatings Product/Procedure Data Sheet |
|
MIL P 87107 : C
|
PROPELLANT, HIGH DENSITY SYNTHETIC HYDROCARBON TYPE, GRADE JP-9 AND JP-10 |
|
MIL T 25524 : D
|
TURBINE FUEL, AVIATION, THERMALLY STABLE |
|
MIL D 50030 : H
|
DECONTAMINATING AGENT, DS2 |
|
ASTM F 1200 : 1988 : R2010
|
Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150°F) |
|
ASTM D 115 : 2017 : REDLINE
|
Standard Test Methods for Testing Solvent Containing Varnishes Used for Electrical Insulation |
|
MIL DTL 25576 : E
|
PROPELLANT, ROCKET GRADE KEROSENE |
|
MIL PRF 5606 : H
|
HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT, MISSILE, AND ORDNANCE |
|
MIL C 16173 : E
|
CORROSION PREVENTIVE COMPOUND, SOLVENT CUTBACK, COLD APPLICATION |
|
MIL C 29602 : 0
|
CLEANING COMPOUNDS, FOR PARTS WASHERS AND SPRAY CABINETS |
|
SAE AMS 1374 : 2004
|
REMOVER, POLYURETHANE/EPOXY PAINT, ALKALINE, HOT-TANK TYPE |
|
SAE AMS 1536 : 2008
|
CLEANER FOR AIRCRAFT COMPONENTS COLD TANK TYPE, SOLVENT-BASE |
|
ASTM D 4712 : 1987 : REV A : R2001
|
Standard Guide for Testing Industrial Water-Reducible Coatings |
|
UNI/TS 11446 : 2012
|
PYROLYTIC BIOLIQUIDS - CLASSIFICATION AND SPECIFICATIONS FOR ENERGY USE |
|
NFPA 81 : 1986
|
FUR STORAGE, FUMIGATION AND CLEANING |
|
ASTM D 3278 : 1996 : R2004 : EDT 1
|
Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus |
|
SAE AMS 1539 : 1996 (S2018)
|
CLEANING COMPOUND, TERPENE, CIRCUIT BOARD CLEANER |
|
DEFSTAN 91-43/2(1993) : 1993
|
LUBRICATING OIL, ENGINE: GRADE 50 NATO CODE NO. 0-182 JOINT SERVICE DESIGNATION: OMD-330 |
|
I.S. CEN/TR 15138:2005
|
PETROLEUM PRODUCTS AND OTHER LIQUIDS - GUIDE TO FLASH POINT TESTING |
|
ASTM C 916 : 2014 : REDLINE
|
Standard Specification for Adhesives for Duct Thermal Insulation |
|
ASTM D 6618 : 2016 : REDLINE
|
Standard Test Method for Evaluation of Engine Oils in Diesel Four-Stroke Cycle Supercharged 1M-PC Single Cylinder Oil Test Engine |
|
BS ISO 8178-5:2008
|
RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - PART 5: TEST FUELS |
|
ASTM D 910 : 2017-05
|
SPECIFICATION FOR LEADED AVIATION GASOLINES |
|
BS 2000-35(1993) : 1993
|
METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - DETERMINATION OF OPEN FLASH AND FIRE POINT - PENSKY-MARTENS METHOD |
|
ASTM D 7156 : 2017 : REDLINE
|
Standard Test Method for Evaluation of Diesel Engine Oils in the T-11 Exhaust Gas Recirculation Diesel Engine |
|
ASTM D 8147 : 2017
|
Standard Specification for Special-Purpose Test Fuels for Aviation Compression-Ignition Engines |
|
ASTM E 502 : 2007 : EDT 1
|
Standard Test Method for Selection and Use of ASTM Standards for the Determination of Flash Point of Chemicals by Closed Cup Methods |
|
ASTM D 333 : 2001
|
Standard Guide for Clear and Pigmented Lacquers |
|
ASTM D 1655 : 2018-01
|
SPECIFICATION FOR AVIATION TURBINE FUELS |
|
ASTM F 1201 : 1988 : R2010
|
Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0°F |
|
ISO/TR 11018:1997
|
Essential oils General guidance on the determination of flashpoint |
|
ASTM D 6468 : 2008
|
Standard Test Method for High Temperature Stability of Middle Distillate Fuels |
|
GOST 849:2018
|
Primary nickel. SpecificationsE |
|
BS EN ISO 8178-5:1997
|
RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - TEST FUELS |
|
EN 16900:2017
|
Fast pyrolysis bio-oils for industrial boilers - Requirements and test methods |
|
DEFSTAN 91-38/1(1978) : 1978
|
PETROLATUM, TECHNICAL JOINT SERVICE DESIGNATION: PX-6 PETROLATUM, TECHNICAL NATO CODE NO: S-743 JOINT SERVICE DESIGNATION: PX-7 |
|
AASHTO TP 102 : 2012 : R2015
|
METHOD OF TEST FOR EVALUATION OF ASPHALT RELEASE AGENTS (ARAS) |
|
PD CEN/TR 15138:2005
|
PETROLEUM PRODUCTS AND OTHER LIQUIDS - GUIDE TO FLASH POINT TESTING |
|
TT C 001951 : 0
|
COATING, CLEAR (SATIN FINISH), POLYURETHANE, LATEX, FOR INTERIOR USE |
|
API 555 : 2013
|
PROCESS ANALYZERS |
|
08/30190684 DC : DRAFT OCT 2008
|
BS ISO 18436-5 - CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - REQUIREMENTS FOR QUALIFICATION AND ASSESSMENT OF PERSONNEL - PART 5: LUBRICANT LABORATORY TECHNICIAN/ANALYST |
|
DOD E 699 : D
|
ENAMEL, EXTERIOR, DECK, GRAY (FORMULA NO.20) (METRIC) |
|
ASTM F 1200 : 1988 : R1998
|
Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150°F) |
|
DOD E 698 : C
|
ENAMEL, ALKYD, DECK, BLACK (FORMULA NO. 24) |
|
MIL PRF 16173 : E
|
CORROSION PREVENTATIVE COMPOUND, SOLVENT CUTBACK, COLD-APPLICATION |
|
CSA Z752 : 2003
|
DEFINITION OF HOUSEHOLD HAZARDOUS WASTE |
|
NFPA 115 : 2016
|
LASER FIRE PROTECTION |
|
MIL D 16791 : G
|
DETERGENT, GENERAL PURPOSE (LIQUID, NONIONIC) |
|
MIL C 85704 : B
|
CLEANING COMPOUND, TURBINE ENGINE GAS PATH |
|
ASTM F 2417 : 2017 : REDLINE
|
Standard Specification for Fire Safety for Candles |
|
DOD P 15146 : B
|
PAINT, EXTERIOR, DULL BLACK (FORMULA NO. 104) (METRIC) |
|
ASTM D 5372 : 2017 : REDLINE
|
Standard Guide for Evaluation of Hydrocarbon Heat Transfer Fluids |
|
ASTM D 4865 : 2009
|
Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems |
|
15/30325842 DC : 0
|
BS EN 16900 - FAST PYROLYSIS BIO-OILS FOR INDUSTRIAL BOILERS - REQUIREMENTS AND TEST METHODS |
|
MIL I 24092 : D
|
INSULATING VARNISHES AND SOLVENTLESS RESINS FOR APPLICATION BY THE DIP PROCESS |
|
SAE AMS 1424 : 2017
|
FLUID, AIRCRAFT DEICING/ANTI-ICING, SAE TYPE 1 |
|
MIL E 15145 : C
|
ENAMEL, ZINC DUST PIGMENTED, FRESH WATER TANK PROTECTIVE, FORMULA NO. 102 |
|
MIL C 11090 : F (1)
|
CLEANING COMPOUND, DEGREASING AND DEPRESERVING SOLVENT, SELF-EMULSIFYING |
|
PPP P 1892 : 0
|
PAINT, VARNISH, LACQUER AND RELATED MATERIALS, PACKAGING, PACKING, AND MARKING OF |
|
CGSB 2.16 : 1994
|
WATERLESS HAND CLEANER |
|
DEFSTAN 91-86/3(2002) : 2002
|
TURBINE FUEL, AVIATION KEROSENE TYPE: HIGH FLASH TYPE, CONTAINING FUEL SYSTEM ICING INHIBITOR NATO CODE: F-44 JOINT SERVICE DESIGNATION: AVCAT/FSII |
|
MIL PRF 87937 : D
|
CLEANING COMPOUND, AEROSPACE EQUIPMENT |
|
DOD PRF 24648 : 0
|
PRIMER COATING, ZINC DUST PIGMENTED FOR EXTERIOR STEEL SURFACES (METRIC) |
|
MIL DTL 46162 : E
|
FUEL, DIESEL, REFEREE GRADE |
|
ASTM D 6763 : 2016 : REDLINE
|
Standard Guide for Testing Exterior Wood Stains and Clear Water Repellents |
|
DEFSTAN 91-86/5(2005) : 2005
|
TURBINE FUEL, AVIATION KEROSINE TYPE: HIGH FLASH TYPE, CONTAINING FUEL SYSTEM ICING INHIBITOR NATO CODE: F-44 JOINT SERVICE DESIGNATION: AVCAT/FSII |
|
MIL P 24380 : B
|
PAINT, ANCHOR, CHAIN, SOLVENT TYPE, GLOSS BLACK |
|
CSA M423 : 1987 : R2016
|
FIRE RESISTANT HYDRAULIC FLUIDS |
|
MIL I 25135 : E
|
INSPECTION MATERIALS, PENETRANTS |
|
MIL DTL 87173 : C
|
PROPELLANT, PRIMING FLUID ALCM, GRADE PF-1 |
|
ASTM ES 19 : 1991
|
Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration (Withdrawn 1994) |
|
DEFSTAN 91-44/1(1978) : 1978
|
LUBRICATING OIL, GENERAL PURPOSE: PETROLEUM, LIGHT NATO CODE NO. 0-134 JOINT SERVICE DESIGNATION: OM-13 |
|
SAE AMS 1435 : 2012
|
FLUID, GENERIC, DEICING/ANTI-ICING, RUNWAYS AND TAXIWAYS |
|
API 13I SPANISH : 1995
|
PRACTICA RECOMENDADA PROCEDIMIENTO ESTANDAR PARA LAS PRUEBAS DE LABORATORIO CON FLUIDOS DE PEFORACION |
|
DEFSTAN 91-86/1(1994) : INTERIM
|
TURBINE FUEL, AVIATION, HIGH FLASH TYPE CONTAINING FUEL SYSTEM ICING INHIBITOR NATO CODE: F-44 JOINT SERVICE DESIGNATION: AVCAT/FSII |
|
UNI ISO 18436-5 : 2013
|
CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - REQUIREMENTS FOR QUALIFICATION AND ASSESSMENT OF PERSONNEL - PART 5: LUBRICANT LABORATORY TECHNICIAN/ANALYST |
|
NFPA 30 FRENCH : 1996
|
FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE |
|
ASTM D 6823 : 2008 : R2013
|
Standard Specification for Commercial Boiler Fuels With Used Lubricating Oils |
|
SAE J 357 : 2016
|
PHYSICAL AND CHEMICAL PROPERTIES OF ENGINE OILS |
|
SAE J 313 : 2017
|
DIESEL FUELS |
|
ASTM D 2932 : 1980 : R1988 : EDT 1
|
Guide for Testing Exterior Solvent-Based House and Trim Coatings (Withdrawn 1993) |
|
DEFSTAN 68-131/2(2006) : 2006
|
MINERAL JELLY |
|
ASTM D 268 : 2001
|
Standard Guide for Sampling and Testing Volatile Solvents and Chemical Intermediates for Use in Paint and Related Coatings and Material |
|
ASTM F 1200 : 1988 : R2016
|
Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150°F) |
|
ASTM D 7467 : 2017-03
|
SPECIFICATION FOR DIESEL FUEL OIL, BIODIESEL BLEND (B6 TO B20) |
|
ASTM D 7583 : 2016 : REDLINE
|
Standard Test Method for John Deere Coolant Cavitation Test |
|
ASTM D 6483 : 2004
|
Standard Test Method for Evaluation of Diesel Engine Oils in T-9 Diesel Engine (Withdrawn 2009) |
|
ASTM D 8074 : 2016
|
Standard Test Method for Evaluation of Diesel Engine Oils in DD13 Diesel Engine |
|
ASTM D 7544 : 2012 : R2017
|
Standard Specification for Pyrolysis Liquid Biofuel |
|
ASTM D 5177 : 1991 : R1996
|
Standard Guide for Waste Acceptance at Hazardous Waste Incinerators (Withdrawn 2005) |
|
ASTM D 5452 : 2012 : REDLINE
|
Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration |
|
ASTM D 4712 : 1987 : REV A : R2005
|
Standard Guide for Testing Industrial Water-Reducible Coatings (Withdrawn 2014) |
|
ASTM D 6681 : 2017 : REDLINE
|
Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1P Test Procedure |
|
ASTM D 3278 : 1996 : EDT 1
|
Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus |
|
ASTM D 7960 : 2018 : REDLINE
|
Standard Specification for Unleaded Aviation Gasoline Test Fuel Containing Non-hydrocarbon Components |
|
ASTM D 1131 : 1997
|
Standard Test Methods of Testing Rosin Oils (Withdrawn 2003) |
|
NFPA 1 HDBK : 2015
|
FIRE CODE HANDBOOK |
|
NFPA 1 : 2018
|
FIRE CODE |
|
CEN/TR 17103:2017
|
Petroleum and related products - Fast pyrolysis bio-oils for stationary internal combustion engines - Quality determination |
|
ICC 2012 INTERNATIONAL MECH. CODE : 2012
|
INTERNATIONAL MECHANICAL CODE |