W-F-1814 Revision D:2013
|
FUSES, CARTRIDGE, HIGH-INTERRUPTING CAPACITY |
UL 507:10ED 2017-11
|
Electric Fans |
CSA C22.2 No. 60335-1:2011
|
SAFETY OF HOUSEHOLD AND SIMILAR APPLIANCES - PART 1: GENERAL REQUIREMENTS |
IEC 61241-18:2004
|
Electrical apparatus for use in the presence of combustible dust - Part 18: Protection by encapsulation 'mD' |
UL 60079-5:4ED 2016-04
|
Explosive Atmospheres - Part 5: Equipment protection by powder filling |
UL 2388:2ED 2017-05
|
Flexible Lighting Products |
UL 1815:5ED 2012-02
|
Nonducted Heat Recovery Ventilators |
UL 1640:4ED 2016-11
|
Portable Power-Distribution Equipment |
I.S. EN 60079-11:2012
|
EXPLOSIVE ATMOSPHERES - PART 11: EQUIPMENT PROTECTION BY INTRINSIC SAFETY 'I' |
CSA C22.2 No. 27 :2009
|
BUSWAYS |
CSA C22.2 No. 254 : 2005(R2015)
|
MOTOR CONTROL CENTRES |
CAN/CSA-C22.2 NO. 60947-1-13 (R2018)
|
Low-voltage switchgear and controlgear - Part 1: General rules (Tri-national standard, with UL 60947-1 and NMX-J-515-ANCE) |
ISA 12.02.01 : 2002
|
ELECTRICAL APPARATUS FOR USE IN CLASS 1, ZONES 0, 1 & 2 HAZARDOUS (CLASSIFIED) LOCATIONS - INTRINSIC SAFETY |
ISA 61241-18 : 2006
|
ELECTRICAL APPARATUS FOR USE IN ZONE 20, ZONE 21 AND ZONE 22 HAZARDOUS (CLASSIFIED) LOCATIONS - PROTECTION BY ENCAPSULATION "MD" |
NEMA PB 1:2011
|
Panelboards |
BIS IS/IEC 60079-11 : 2006
|
EXPLOSIVE ATMOSPHERES - PART 11: EQUIPMENT PROTECTION BY INTRINSIC SAFETY 'I' |
BIS IS/IEC 60079-18 : 2009
|
EXPLOSIVE ATMOSPHERES - PART 18: EQUIPMENT PROTECTION BY ENCAPSULATION 'M' |
NEMA PB 2:2011
|
Deadfront Distribution Switchboards |
IEC 60079-11:2011 RLV
|
Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" |
CSA C22.2 No. 199 : 2007 : R2011
|
AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2: PARTICULAR REQUIREMENTS FOR AUTOMATIC BURNER IGNITION SYSTEMS AND COMPONENTS |
UL 1740:4ED 2018-01
|
Robots and Robotic Equipment |
C22.2 NO. 182.1-17
|
Plugs, receptacles, and cable connectors of the pin and sleeve type (Trinational standard with NMX-J-719-ANCE and UL 1682) |
C22.2 NO. 4248.1-17
|
Fuseholders Part 1: General requirements (Trinational standard with UL 4248-1 and NMX-J-009/4248/1-ANCE) |
UL 863:8ED 2007-11
|
Standard for Time-Indicating and -Recording Appliances |
UL 82:9ED 2017-08
|
Electric Gardening Appliances |
UL 778:6ED 2016-07
|
Motor-Operated Water Pumps |
UL 150:4ED 2004-11
|
Antenna Rotators |
C22.2 NO. 236-15
|
Heating and cooling equipment (Bi-national standard with UL 1995) |
UL 73:10ED 2011-03
|
Motor-Operated Appliances |
UL 1682:5ED 2017-02
|
Plugs, Receptacles, and Cable Connectors of the Pin and Sleeve Type |
UL 1559:5ED 2011-03
|
Insect-Control Equipment - Electrocution Type |
UL 508A:3ED 2018-04
|
Industrial Control Panels |
UL 458:6ED 2015-09
|
Power Converters/Inverters and Power Converter/Inverter Systems for Land Vehicles and Marine Crafts |
UL 921 : 7
|
COMMERCIAL DISHWASHERS |
NFPA 70 : 2017
|
NATIONAL ELECTRICAL CODE |
UL 771:9ED 2006-10
|
Night Depositories |
IEC 60079-11:2011
|
Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" |
UL 1778:5ED 2014-06
|
Uninterruptible Power Systems |
UL 506:14ED 2017-06
|
Specialty Transformers |
UL 1447:6ED 2017-10
|
Standard for Electric Lawn Mowers |
CSA C22.2 No. 27 : 2009 : R2013
|
BUSWAYS |
UL 963:4ED 2016-02
|
Standard for Sealing, Wrapping, and Marking Equipment |
UL 795:8ED 2016-12
|
Commercial-Industrial Gas Heating Equipment |
CAN/CSA-C22.2 NO. 60335-1:11 (R2016)
|
Safety of household and similar appliances - Part 1: General requirements (Tri-national standard, with NMX-J-521/1-ANCE and UL 60335-1) |
UL 508:18ED 2018-03
|
Industrial Control Equipment |
CSA C22.2 NO. 178.3:17
|
Transfer switch equipment, over 1000 volts (Binational standard with UL 1008A) |
CSA C22.2 No. 60079-11 : 2014
|
EXPLOSIVE ATMOSPHERES - PART 11: EQUIPMENT PROTECTION BY INTRINSIC SAFETY 'I' |
C22.2 NO. 27-09 (R2017)
|
Busways (Tri-national standard, with UL 857 and NMX-J-148-ANCE) |
UL 1018:6ED 2011-04
|
Electric Aquarium Equipment |
UL 588:19ED 2015-10
|
Seasonal and Holiday Decorative Products |
IEC 60079-11 REDLINE : 6.0
|
EXPLOSIVE ATMOSPHERES - PART 11: EQUIPMENT PROTECTION BY INTRINSIC SAFETY 'I' |
UL 586:9ED 2009-08
|
High-Efficiency, Particulate, Air Filter Units |
CSA C22.2 No. 168 : 2016
|
COMMERCIAL DISHWASHERS |
C22.2 NO. 280-16
|
Electric vehicle supply equipment (Tri-national standard, with UL 2594 and NMX-J-677-ANCE-2016) |
UL 499:14ED 2014-11
|
Electric Heating Appliances |
CSA C22.2 NO. 60947-4-1:14 (R2019)
|
Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters ( Bi-national standard, with UL 60947-4-1) |
UL 60947-7-3:3ED 2017-01
|
Low-Voltage Switchgear and Controlgear - Part 7-3: Ancillary Equipment - Safety Requirements for Fuse Terminal Blocks |
UL 283:3ED 2015-06
|
Air Fresheners and Deodorizers |
IEEE C37.26 : 2014
|
GUIDE FOR METHODS OF POWER-FACTOR MEASUREMENT FOR LOW-VOLTAGE (1000 V AC OR LOWER) INDUCTIVE TEST CIRCUITS |
I.S. EN 61241-18:2004
|
ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 18: PROTECTION BY ENCAPSULATION "MD" |
BS EN 61241-18:2004
|
ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 18: PROTECTION BY ENCAPSULATION "MD" |
CSA C22.2 No. 169 : 2015
|
ELECTRIC CLOTHES WASHING MACHINES AND EXTRACTORS |
CSA C22.2 NO. 60947-4-2:14 (R2019)
|
Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters ( Bi-national standard, with UL 60947-4-2) |
UL 857:13ED 2009-03
|
Busways |
BS EN 60079-11:2012
|
Explosive atmospheres Equipment protection by intrinsic safety \'i\' |
CSA C22.2 No. 112 : 2015
|
ELECTRIC CLOTHES DRYERS |
CSA C22.2 No. 199 :2007
|
AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2: PARTICULAR REQUIREMENTS FOR AUTOMATIC BURNER IGNITION SYSTEMS AND COMPONENTS |
UL 1090:7ED 2016-10
|
Electric Snow Movers |
UL 1647:6ED 2015-08
|
Motor-Operated Massage and Exercise Machines |
08/30175787 DC : DRAFT JAN 2008
|
BS EN 60079-11 - EXPLOSIVE ATMOSPHERES - PART 11: EQUIPMENT PROTECTION BY INTRINSIC SAFETY "I" |
CSA C22.2 No. 167 : 2017
|
HOUSEHOLD DISHWASHERS |
UL 296:11ED 2017-02
|
Oil Burners |
CSA C22.2 No. 107.3 : 2014
|
UNINTERRUPTIBLE POWER SYSTEMS |
UL 541:9ED 2016-04
|
Refrigerated Vending Machines |
13/30271432 DC : 0
|
BS EN 60079-18 ED 4.0 - EXPLOSIVE ATMOSPHERES - PART 18: EQUIPMENT PROTECTION BY ENCAPSULATION 'M' |
UL 916:5ED 2015-10
|
Energy Management Equipment |
IEEE 242 : 2001
|
PROTECTION AND COORDINATION OF INDUSTRIAL AND COMMERCIAL POWER SYSTEMS |
NFPA 70 HDBK : 2017
|
NATIONAL ELECTRICAL CODE HANDBOOK |
CAN/CSA-C22.2 NO. 60947-7-3:17
|
Low-voltage switchgear and controlgear ? Part 7-3: Ancillary equipment ? Safety requirements for fuse terminal blocks (Trinational standard NMX-J-538/7-3-ANCE with UL 60947-7-3) |
IEEE C37.13-2015
|
LOW-VOLTAGE AC POWER CIRCUIT BREAKERS USED IN ENCLOSURES |
CSA C22.2 No. 199 : 2007 : INC : ADD A : 2010 : R2012
|
AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2: PARTICULAR REQUIREMENTS FOR AUTOMATIC BURNER IGNITION SYSTEMS AND COMPONENTS |
UL 1795:5ED 2016-09
|
Standard for Hydromassage Bathtubs |
UL 1008A:2ED 2017-09
|
Transfer Switch Equipment, Over 1000 Volts |
UL 60335-1:6ED 2016-10
|
Safety of Household and Similar Appliances, Part 1: General Requirements |
CSA C22.2 No. 199 : 2007 : INC : ADD A : 2010
|
AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2: PARTICULAR REQUIREMENTS FOR AUTOMATIC BURNER IGNITION SYSTEMS AND COMPONENTS |
CSA C22.2 No. 27 : 2009 : INC : UPD 1 : 2011
|
BUSWAYS |
UL 2044 : 3
|
COMMERCIAL CLOSED-CIRCUIT TELEVISION EQUIPMENT |
CAN/CSA-C22.2 No. 62841-1 : 2015
|
ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
UL 858:16ED 2014-11
|
Household Electric Ranges |
UL 1484:5ED 2016-04
|
Residential Gas Detectors |
ANSI Z83.21 : 2016
|
COMMERCIAL DISHWASHERS |
IEEE C37.13.1-2006
|
IEEE Standard for Definite Purpose Switching Devices for Use in Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear |
UNE-EN 60079-11:2013
|
Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" |
EN 61241-18:2004
|
Electrical apparatus for use in the presence of combustible dust - Part 18: Protection by encapsulation "mD" |
MIL-PRF-23419 Revision H:2013
|
FUSE, CARTRIDGE, INSTRUMENT TYPE, GENERAL SPECIFICATION FOR |
EN 60079-11:2012
|
Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" |