ASTM F 3346 : 2019
|
Standard Specification for Polyethylene of Raised Temperature/Aluminum/Polyethylene of Raised Temperature (PERT/AL/PE-RT) Composite Pressure Pipe
|
ASTM F 2619/F2619M : 2013
|
Standard Specification for High-Density Polyethylene (PE) Line Pipe
|
ASTM F 2763 : 2016
|
Standard Specification for 12 to 60 in. [300 to 1500 mm] Dual and Triple Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications
|
ASTM F 810 : 2012 : R2018
|
Standard Specification for Smoothwall Polyethylene (PE) Pipe for Use in Drainage and Waste Disposal Absorption Fields
|
ASTM F 412 : 2019
|
Standard Terminology Relating to Plastic Piping Systems
|
ASTM D 4883 : 2018
|
Standard Test Method for Density of Polyethylene by the Ultrasound Technique
|
ASTM F 2306/F2306M : 2019
|
Standard Specification for 12 to 60 in. [300 to 1500 mm] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Gravity-Flow Storm Sewer and Subsurface Drainage Applications
|
ASTM F 2807 : 2013 : R2018
|
Standard Specification for Multilayer Polyethylene-Polyamide (PE-PA) Pipe for Pressure Piping Applications
|
ASTM D 2239 : 2012 : REV A
|
Standard Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter
|
ASTM F 1281 : 2017
|
Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe
|
ASTM F 714 : 2013
|
Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter
|
ASTM E 3101 : 2018
|
Standard Practice for Microwave Examination of Polyethylene Butt Fusion Joints
|
ASTM F 2435 : 2015
|
Standard Specification for Steel Reinforced Polyethylene (PE) Corrugated Pipe
|
ASTM F 1055 : 2016 : REV A
|
Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene and Crosslinked Polyethylene (PEX) Pipe and Tubing
|
ASTM F 2737 : 2011 : R2017
|
Standard Specification for Corrugated High Density Polyethylene (HDPE) Water Quality Units
|
ASTM F 1412 : 2016
|
Standard Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems
|
ASTM F 1987 : 2001 : R2011
|
Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hydronic Heating Systems (Withdrawn 2020)
|
ASTM F 2986 : 2012 : R2017
|
Standard Specification for Corrugated Polyethylene Pipe and Fittings for Mine Leachate Applications
|
ASTM F 2686 : 2014
|
Standard Specification for Glass Fiber Reinforced Thermoplastic Pipe (Withdrawn 2023)
|
ASTM D 2683 : 2014
|
Standard Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing
|
ASTM D 1693 : 2015
|
Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics
|
ASTM F 1901 : 2016
|
Standard Specification for Polyethylene (PE) Pipe and Fittings for Roof Drain Systems
|
ASTM E 1858 : 2008 : R2015 : EDT 1
|
Standard Test Methods for Determining Oxidation Induction Time of Hydrocarbons by Differential Scanning Calorimetry
|
ASTM F 3371 : 2019
|
Standard Specification for Polyolefin Pipe and Fittings for Drainage, Waste, and Vent Applications
|
ASTM F 2947/F2947M : 2019
|
Standard Specification for 150 to 1500 mm [6 to 60 in.] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications
|
ASTM E 3102 : 2018
|
Standard Practice for Microwave Examination of Polyethylene Electrofusion Joints Used in Piping Application
|
ASTM F 2648/F2648M : 2017
|
Standard Specification for 2 to 60 inch [50 to 1500 mm] Annular Corrugated Profile Wall Polyethylene (PE) Pipe and Fittings for Land Drainage Applications
|
ASTM F 1986 : 2001 : R2011
|
Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-Water Systems (Withdrawn 2020)
|
ASTM F 2922 : 2013 : R2018
|
Standard Specification for Polyethylene (PE) Corrugated Wall Stormwater Collection Chambers
|
ASTM D 3035 : 2015
|
Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter
|
ASTM D 7001 : 2006 : R2011
|
Standard Specification for Geocomposites for Pavement Edge Drains and Other High-Flow Applications
|
ASTM E 2009 : 2008 : R2014 : EDT 1
|
Standard Test Methods for Oxidation Onset Temperature of Hydrocarbons by Differential Scanning Calorimetry
|
ASTM D 4976 : 2012 : REV A
|
Standard Specification for Polyethylene Plastics Molding and Extrusion Materials
|
ASTM F 667/F667M : 2016
|
Standard Specification for 3 through 24 in. Corrugated Polyethylene Pipe and Fittings
|
ASTM D 3485 : 2015
|
Standard Specification for Coilable High Density Polyethylene (HDPE) Cable in Conduit (CIC)
|
ASTM F 1759 : 1997 : R2018
|
Standard Practice for Design of High-Density Polyethylene (HDPE) Manholes for Subsurface Applications
|
ASTM F 2562/F2562M : 2015
|
Specification for Steel Reinforced Thermoplastic Ribbed Pipe and Fittings for Non-Pressure Drainage and Sewerage
|
ASTM F 2805 : 2016
|
Standard Specification for Multilayer Thermoplastic And Flexible Steel Pipe And Connections
|
ASTM E 3167/E3167M : 2018
|
Standard Practice for Conventional Pulse-Echo Ultrasonic Testing of Polyethylene Electrofusion Joints
|
ASTM D 4703 : 2016
|
Standard Practice for Compression Molding Thermoplastic Materials into Test Specimens, Plaques, or Sheets
|
ASTM F 2818 : 2010 : R2014 : EDT 1
|
Standard Specification for Specification for Crosslinked Polyethylene (PEX) Material Gas Pressure Pipe and Tubing
|
ASTM F 1545 : 2015 : REV A
|
Standard Specification for Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges
|
ASTM F 2880 : 2014
|
Standard Specification for Lap-Joint Type Flange Adapters for Polyethylene Pressure Pipe in Nominal Pipe Sizes <fraction><num>3/4</den></fraction > in. to 65 in.
|
ASTM F 1606 : 2005 : R2014
|
Standard Practice for Rehabilitation of Existing Sewers and Conduits with Deformed Polyethylene (PE) Liner
|
ASTM D 4000 : 2016
|
Standard Classification System for Specifying Plastic Materials
|
ASTM F 3034 : 2015
|
Standard Specification for Billets made by Winding Molten Extruded Stress-Rated High Density Polyethylene (HDPE)
|
ASTM D 3261 : 2016
|
Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing
|
ASTM F 2623 : 2019
|
Standard Specification for Polyethylene of Raised Temperature (PE-RT) Systems for Non-Potable Water Applications
|
ASTM E 2046 : 2014
|
Standard Test Method for Reaction Induction Time by Thermal Analysis
|
ASTM F 1282 : 2017
|
Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe
|
ASTM D 7436 : 2017
|
Standard Classification System for Unfilled Polyethylene Plastics Molding and Extrusion Materials with a Fractional Melt Index Using ISO Protocol and Methodology
|
ASTM F 3123 : 2018 : REV A
|
Standard Specification for Metric Outside Diameter Polyethylene (PE) Plastic Pipe (DR-PN)
|
ASTM F 2160 : 2016
|
Standard Specification for Solid Wall High Density Polyethylene (HDPE) Conduit Based on Controlled Outside Diameter (OD)
|
ASTM E 3170/E3170M : 2018
|
Standard Practice for Phased Array Ultrasonic Testing of Polyethylene Electrofusion Joints
|
ASTM F 1734 : 2019
|
Standard Practice for Qualification of a Combination of Squeeze Tool, Pipe, and Squeeze-Off Procedures to Avoid Long-Term Damage in Polyethylene (PE) Gas Pipe
|
ASTM F 2021 : 2017
|
Standard Guide for Design and Installation of Plastic Siphonic Roof Drainage Systems
|
ASTM D 2737 : 2012 : REV A
|
Standard Specification for Polyethylene (PE) Plastic Tubing
|
ASTM D 1248 : 2016
|
Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable
|
ASTM F 2769 : 2018
|
Standard Specification for Polyethylene of Raised Temperature (PE-RT) Plastic Hot and Cold-Water Tubing and Distribution Systems
|
ASTM F 894 : 2019
|
Standard Specification for Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe
|