I.S. EN 10217-7:2014
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEEL TUBES
Hardcopy , PDF
31-05-2021
English
01-01-2014
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols
5 Classification and designation
6 Information to be supplied by the purchaser
7 Manufacturing process
8 Requirements
9 Inspection
10 Sampling
11 Verification test methods
12 Marking
13 Handling and packaging
Annex A (informative) - Technical changes from the previous
edition
Annex ZA (informative) - Relationship between this European
Standard and the Essential Requirements of
EU Directive 97/23/EC
Defines the technical delivery conditions in two test categories for welded tubes of circular cross-section made of austenitic and austenitic-ferritic stainless steel which are intended for pressure and corrosion resisting purposes at room temperature, at low temperatures or at elevated temperatures.
DocumentType |
Standard
|
Pages |
40
|
PublisherName |
National Standards Authority of Ireland
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
BS EN 10217-7:2014 | Identical |
EN 10217-7:2014 | Identical |
NBN EN 10217-7 : 2014 | Identical |
NEN EN 10217-7 : 2014 | Identical |
NF EN 10217-7 : 2015 | Identical |
UNE-EN 10217-7:2006 | Identical |
UNI EN 10217-7 : 2014 | Identical |
DIN EN 10217-7:2015-01 | Identical |
NS EN 10217-7 : 2014 | Identical |
ONORM EN 10217-7 : 2014 | Identical |
EN ISO 14284:2002 | Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996) |
EN 10052:1993 | Vocabulary of heat treatment terms for ferrous products |
ISO 8496:2013 | Metallic materials Tube Ring tensile test |
EN ISO 8493 : 2004 | Metallic materials - Tube - Drift-expanding test (ISO 8493:1998) |
EN 10027-2:2015 | DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM |
EN ISO 10893-11:2011 | Non-destructive testing of steel tubes - Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-11:2011) |
CEN/TR 10261:2013 | Iron and steel - European standards for the determination of chemical composition |
ISO 10893-9:2011 | Non-destructive testing of steel tubes Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes |
EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
ISO 9712:2012 | Non-destructive testing Qualification and certification of NDT personnel |
EN ISO 10893-10:2011 | Non-destructive testing of steel tubes - Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-10:2011) |
EN ISO 5173:2010/A1:2011 | DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - BEND TESTS (ISO 5173:2009) |
EN ISO 8495:2013 | Metallic materials - Tube - Ring-expanding test (ISO 8495:2013) |
ISO 10893-1:2011 | Non-destructive testing of steel tubes Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness |
EN ISO 377:2017 | Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017) |
ISO 2566-2:1984 | Steel Conversion of elongation values Part 2: Austenitic steels |
ISO 10893-8:2011 | Non-destructive testing of steel tubes Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections |
EN ISO 8496:2013 | Metallic materials - Tube - Ring tensile test (ISO 8496:2013) |
ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
EN ISO 10893-1:2011 | Non-destructive testing of steel tubes - Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness (ISO 10893-1:2011) |
ISO 10893-11:2011 | Non-destructive testing of steel tubes Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections |
EN 10168:2004 | Steel products - Inspection documents - List of information and description |
ISO 8493:1998 | Metallic materials Tube Drift-expanding test |
EN ISO 10893-8:2011 | Non-destructive testing of steel tubes - Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections (ISO 10893-8:2011) |
ISO 5173:2009 | Destructive tests on welds in metallic materials — Bend tests |
EN ISO 9712:2012 | Non-destructive testing - Qualification and certification of NDT personnel (ISO 9712:2012) |
EN 10028-7:2016 | Flat products made of steels for pressure purposes - Part 7: Stainless steels |
EN ISO 1127:1996 | Stainless steel tubes - Dimensions, tolerances and conventional masses per unit length (ISO 1127:1992) |
ISO 148-1:2016 | Metallic materials — Charpy pendulum impact test — Part 1: Test method |
EN ISO 10893-7:2011 | Non-destructive testing of steel tubes - Part 7: Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections (ISO 10893-7:2011) |
EN ISO 10893-6:2011 | Non-destructive testing of steel tubes - Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections (ISO 10893-6:2011) |
EN 10021:2006 | General technical delivery conditions for steel products |
EN ISO 10893-2:2011 | Non-destructive testing of steel tubes - Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections (ISO 10893-2:2011) |
ISO 3651-2:1998 | Determination of resistance to intergranular corrosion of stainless steels — Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in media containing sulfuric acid |
EN ISO 10893-9:2011 | Non-destructive testing of steel tubes - Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes (ISO 10893-9:2011) |
ISO 857-1:1998 | Welding and allied processes Vocabulary Part 1: Metal welding processes |
EN ISO 2566-2:1999 | Steel - Conversion of elongation values - Part 2: Austenitic steels (ISO 2566-2:1984) |
ISO 8495:2013 | Metallic materials Tube Ring-expanding test |
EN 10204:2004 | Metallic products - Types of inspection documents |
EN ISO 6892-2:2011 | Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature (ISO 6892-2:2011) |
EN ISO 3651-2 : 1998 | DETERMINATION OF RESISTANCE TO INTERGRANULAR CORROSION OF STAINLESS STEELS - FERRITIC, AUSTENITIC AND FERRITIC-AUSTENITIC (DUPLEX) STAINLESS STEELS - CORROSION TEST IN MEDIA CONTAINING SULFURIC ACID |
ISO 11484:2009 | Steel products — Employer's qualification system for non-destructive testing (NDT) personnel |
EN 10027-1:2016 | Designation systems for steels - Part 1: Steel names |
ISO 8492:2013 | Metallic materials Tube Flattening test |
ISO 6892-2:2011 | Metallic materials Tensile testing Part 2: Method of test at elevated temperature |
EN 10020:2000 | Definition and classification of grades of steel |
ISO 10893-6:2011 | Non-destructive testing of steel tubes Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections |
EN ISO 8492:2013 | Metallic materials - Tube - Flattening test (ISO 8492:2013) |
ISO 10893-2:2011 | Non-destructive testing of steel tubes Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections |
EN ISO 148-1:2016 | Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016) |
EN 10266:2003 | Steel tubes, fittings and structural hollow sections - Symbols and definitions of terms for use in product standards |
ISO 10893-7:2011 | Non-destructive testing of steel tubes Part 7: Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections |
ISO 10893-10:2011 | Non-destructive testing of steel tubes Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections |
ISO 377:2017 | Steel and steel products — Location and preparation of samples and test pieces for mechanical testing |
ISO 14284:1996 | Steel and iron — Sampling and preparation of samples for the determination of chemical composition |
EN 10088-1:2014 | Stainless steels - Part 1: List of stainless steels |
ISO 1127:1992 | Stainless steel tubes Dimensions, tolerances and conventional masses per unit length |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.