IEC 60028:1925
Current
The latest, up-to-date edition.
International standard of resistance for copper
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English - French
01-01-1925
PREFACE TO FIRST EDITION
PREFACE TO SECOND EDITION
Definitions
1 Standard Annealed Copper
2 Commercial Copper
Specifies values of the physical properties of annealed copper and how the conductivity of commercial annealed copper can be calculated and expressed as a percentage of standard annealed copper.
Committee |
TC 7
|
DevelopmentNote |
Stability date: 2019. (09/2017)
|
DocumentType |
Standard
|
Pages |
9
|
PublisherName |
International Electrotechnical Committee
|
Status |
Current
|
Standards | Relationship |
PN IEC 60028 : 2006 | Identical |
UNE 20003:1954 | Identical |
NEN N 173 : 1925 | Identical |
98/262057 DC : 0 | IEC 60092-374 - ELECTRICAL INSTALLATIONS IN SHIPS - SHIPBOARD TELECOMMUNICATIONS CABLES AND RADIO-FREQUENCY CABLES - PART 374: TELEPHONE CABLES FOR NON-ESSENTIAL COMMUNICATION SERVICES |
BS EN 61869-1:2009 | Instrument transformers General requirements |
BS EN 61196-3:1999 | Radio-frequency cables. Specifications Sectional specification for coaxial cables for local area networks |
XP C93 503 : 2010 XP | MULTI-PAIR CABLES USED IN HIGH BIT RATE COMMUNICATION NETWORKS WITH BANDWIDTH UP TO 30 MHZ - DUCT AND BURIED CABLES |
UTEC 93 529-1 : 2004 | CABLES FOR TELEPHONE NETWORK WITH PVC INSULATION AND PVC SHEATH - SYT SERIES |
BS EN 50406-2:2004 | End user multi-pair cables used in high bit rate telecommunication networks Duct and buried cables |
I.S. EN 62012-1:2002 | MULTICORE AND SYMMETRICAL PAIR/QUAD CABLES FOR DIGITAL COMMUNICATIONS TO BE USED IN HARSH ENVIRONMENTS - PART 1: GENERIC SPECIFICATION |
PREN 50463-2 : DRAFT 2015 | RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 2: ENERGY MEASURING |
04/30112722 DC : DRAFT APR 2004 | IEC 60044-5 ED.1 - INSTRUMENT TRANSFORMERS - PART 5: CAPACITOR VOLTAGE TRANSFORMERS |
00/201245 DC : DRAFT FEB 2000 | IEC 62029-1 - COAXIAL CABLES USED IN CABLED DISTRIBUTION NETWORKS - PART 1: GENERIC SPECIFICATION AND TEST METHODS |
12/30268049 DC : 0 | BS EN 62689-1 - CURRENT AND VOLTAGE SENSORS OR DETECTORS, TO BE USED FOR FAULT PASSAGE INDICATION PURPOSES - PART 1: GENERAL PRINCIPLES AND REQUIREMENTS |
11/30251682 DC : 0 | BS EN 1977 - COPPER AND COPPER ALLOYS - COPPER DRAWING STOCK (WIRE ROD) |
BS EN 50407-3:2014 | Multi-pair cables used in high bit rate digital access telecommunications networks Indoor multi-pair/quad riser cables up to 100 MHz for maximum length of connection 100 m supporting universal services, xDSL and applications up to 100 Mbit/s over IP |
DIN EN 60521 : 1995 | CLASSES 0,5, 1 AND 2 ALTERNATING-CURRENT WATTHOUR METERS |
15/30329546 DC : 0 | BS EN 50463-2 - RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 2: ENERGY MEASURING |
BS EN 50463-2:2017 | Railway applications. Energy measurement on board trains Energy measuring |
15/30335854 DC : 0 | BS EN 2346-005 - AEROSPACE SERIES - CABLE, ELECTRICAL, FIRE RESISTANT - OPERATING TEMPERATURES BETWEEN - 65 DEGREES C AND 260 DEGREES C - PART 005: DW FAMILY, SINGLE UV LASER PRINTABLE AND MULTICORE ASSEMBLY - LIGHT WEIGHT - PRODUCT STANDARD |
I.S. EN 60034-18-34:2012 | ROTATING ELECTRICAL MACHINES - PART 18-34: FUNCTIONAL EVALUATION OF INSULATION SYSTEMS - TEST PROCEDURES FOR FORM-WOUND WINDINGS - EVALUATION OF THERMOMECHANICAL ENDURANCE OF INSULATION SYSTEMS (IEC 60034-18-34:2012 (EQV)) |
UNE-EN 50290-2-1:2010 | Communication cables -- Part 2-1: Common design rules and construction |
98/202856 DC : 0 | PREN 60044-1 - INSTRUMENT TRANSFORMERS - PART 1: CURRENT TRANSFORMERS |
CSA C60044-5:2007 | INSTRUMENT TRANSFORMERS - PART 5: CAPACITOR VOLTAGE TRANSFORMERS |
00/717056 DC : DRAFT NOV 2000 | PREN 4199-006 - AEROSPACE SERIES - BONDING STRAPS FOR AIRCRAFT, ROUND BRAID COPPER CONDUCTORS FOR BONDING STRAPS, TIN PLATED, UP TO +150 DEGREE C, NICKEL PLATED, UP TO +260 DEGREE C - PRODUCT STANDARD |
CEI EN 50288-1 : 2014 | MULTI-ELEMENT METALLIC CABLES USED IN ANALOGUE AND DIGITAL COMMUNICATION AND CONTROL - PART 1: GENERIC SPECIFICATION |
CSA C60044-5 : 2007 : R2011 | INSTRUMENT TRANSFORMERS - PART 5: CAPACITOR VOLTAGE TRANSFORMERS |
CEI EN 50407-1 : 2006 | MULTI-PAIR CABLES USED IN HIGH BIT RATE DIGITAL ACCESS TELECOMMUNICATION NETWORKS - PART 1: OUTDOOR CABLES |
I.S. EN 60044-8:2002 | INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRANSFORMERS |
BS EN 60044-8:2002 | Instrument transformers Electronic current transformers |
PREN 2346-002 : 200P2 | AEROSPACE SERIES - CABLE, ELECTRICAL, FIRE RESISTANT - OPERATING TEMPERATURES BETWEEN -65 DEGREES C AND 260 DEGREES C - PART 002: GENERAL |
CEI EN 60034-18-34 : 2013 | ROTATING ELECTRICAL MACHINES - PART 18-34: FUNCTIONAL EVALUATION OF INSULATION SYSTEMS - TEST PROCEDURES FOR FORM-WOUND WINDINGS - EVALUATION OF THERMOMECHANICAL ENDURANCE OF INSULATION SYSTEMS |
PREN 2346-004 : 200P1 | AEROSPACE SERIES - CABLE, ELECTRICAL, FIRE RESISTANT - OPERATING TEMPERATURES BETWEEN -65 DEGREES C AND 260 DEGREES C- PART 004: DN FAMILY, SINGLE UV LASER PRINTABLE AND MULTICORE ASSEMBLY - LIGHT WEIGHT - PRODUCT STANDARD |
CSA C60044-8 : 2007 : R2016 | INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRANSFORMERS |
PREN 4434 : 200P2 | AEROSPACE SERIES - COPPER OR COPPER ALLOY LIGHTWEIGHT CONDUCTORS FOR ELECTRICAL CABLES - PRODUCT STANDARD (NORMAL AND TIGHT TOLERANCES) |
PREN 2346-003 : 200P1 | AEROSPACE SERIES - CABLE, ELECTRICAL, FIRE RESISTANT - OPERATING TEMPERATURES BETWEEN -65 DEGREES C AND 260 DEGREES C - PART 003: DL FAMILY, SINGLE CORE - PRODUCT STANDARD |
I.S. EN 60708:2005 | LOW-FREQUENCY CABLES WITH POLYOLEFIN INSULATION AND MOISTURE BARRIER POLYOLEFIN SHEATH |
EN IEC 61869-10:2018 | Instrument transformers - Part 10: Additional requirements for low-power passive current transformers |
IEC 60189-2:2007 | Low-frequency cables and wires with PVC insulation and PVC sheath - Part 2: Cables in pairs, triples, quads and quintuples for inside installations |
CEI EN 61095 : 2010 | ELECTROMECHANICAL CONTACTORS FOR HOUSEHOLD AND SIMILAR PURPOSES |
IEC 61156-1:2007+AMD1:2009 CSV | Multicore and symmetrical pair/quad cables for digital communications - Part 1: Generic specification |
PREN 1977 : DRAFT 2011 | COPPER AND COPPER ALLOYS - COPPER DRAWING STOCK (WIRE ROD) |
I.S. EN 50117-1:2002 | COAXIAL CABLES - PART 1: GENERIC SPECIFICATION |
I.S. EN IEC 61869-10:2018 | INSTRUMENT TRANSFORMERS - PART 10: ADDITIONAL REQUIREMENTS FOR LOW-POWER PASSIVE CURRENT TRANSFORMERS |
BS EN 1976:2012 | Copper and copper alloys. Cast unwrought copper products |
UNE-EN 1976:2013 | Copper and copper alloys - Cast unwrought copper products |
BS 4743:1979 | Specification for safety requirements for electronic measuring apparatus |
EN 61869-4:2014/AC:2014 | INSTRUMENT TRANSFORMERS - PART 4: ADDITIONAL REQUIREMENTS FOR COMBINED TRANSFORMERS (IEC 61869-4:2013) |
EN 50406-1:2004 | End user multi-pair cables used in high bit rate telecommunication networks - Part 1: Aerial cables |
EN 60034-18-34:2012 | Rotating electrical machines - Part 18-34: Functional evaluation of insulation systems - Test procedures for form-wound windings - Evaluation of thermomechanical endurance of insulation systems |
EN 61869-3 : 2011 | INSTRUMENT TRANSFORMERS - PART 3: ADDITIONAL REQUIREMENTS FOR INDUCTIVE VOLTAGE TRANSFORMERS (IEC 61869-3:2011) |
EN 60044-5:2004 | Instrument transformers - Part 5: Capacitor voltage transformers |
EN 50288-1:2013 | Multi-element metallic cables used in analogue and digital communication and control - Part 1: Generic specification |
04/30126721 DC : DRAFT DEC 2004 | IEC 60189-2 ED.4 - LOW-FREQUENCY CABLES AND WIRES WITH PVC INSULATION AND PVC SHEATH - PART 2: CABLES IN PAIRS, TRIPLES, QUADS AND QUINTUPLES FOR INSIDE INSTALLATIONS |
04/30126718 DC : DRAFT DEC 2004 | IEC 60189-1 ED.3 - LOW-FREQUENCY CABLES AND WIRES WITH PVC INSULATION AND PVC SHEATH - PART 1: GENERAL TEST AND MEASURING METHODS |
BS EN 60044-5:2004 | Instrument transformers Capacitor voltage transformers |
11/30247047 DC : 0 | BS EN 4674-004 - AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - SELF-WRAPPING SHIELDING (EMI) PROTECTIVE SLEEVE - PART 004: OPEN SLEEVE - UN-PRESSURIZED AREA - EMI PROTECTION 10 KA - TEMPERATURE RANGE -65 DEGREE C +200 DEGREE C - PRODUCT STANDARD |
PREN 50288-1 : DRAFT 2011 | MULTI-ELEMENT METALLIC CABLES USE IN ANALOGUE AND DIGITAL COMMUNICATION AND CONTROL - PART 1: GENERIC SPECIFICATION |
BS EN 60044-1:1999 | Instrument transformers Current transformers |
I.S. EN 50463-2:2017 | RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 2: ENERGY MEASURING |
BS 6156:1981 | Specification for low-frequency miniature equipment wires with solid or stranded conductor, fluorinated polyhydrocarbon type insulation, single |
10/30228110 DC : 0 | BS EN 2346-005 - AEROSPACE SERIES - CABLE, ELECTRICAL, FIRE RESISTANT - OPERATING TEMPERATURES BETWEEN - 65 DEGREE C AND 260 DEGREE C - PART 005: DW FAMILY, SINGLE UV LASER PRINTABLE AND MULTICORE ASSEMBLY - LIGHT WEIGHT - PRODUCT STANDARD |
07/30167174 DC : 0 | BS EN 61869-2 - INSTRUMENT TRANSFORMERS - PART 2: SPECIFIC REQUIREMENT FOR CURRENT TRANSFORMERS |
BS EN 60708:2005 | Low-frequency cables with polyolefin insulation and moisture barrier polyolefin sheath |
07/30167396 DC : 0 | BS EN 61869-4 - INSTRUMENT TRANSFORMERS - PART 4 - SPECIFIC REQUIREMENT FOR COMBINED TRANSFORMERS |
BS EN 50406-1:2004 | End user multi-pair cables used in high bit rate telecommunication networks Aerial cables |
11/30247043 DC : 0 | BS EN 4674-001 - AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - SELF-WRAPPING SHIELDING (EMI) PROTECTIVE SLEEVE - PART 001: TECHNICAL SPECIFICATION |
11/30247046 DC : 0 | BS EN 4674-003 - AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - SELF-WRAPPING SHIELDING (EMI) PROTECTIVE SLEEVE - PART 003: OPEN SLEEVE - PRESSURIZED AREA - EMI PROTECTION 5 KA - TEMPERATURE RANGE -65 DEGREE C +200 DEGREE C - PRODUCT STANDARD |
03/304031 DC : DRAFT MAR 2003 | EN 50406-1 - END USER MULTI-PAIR CABLES USED IN HIGH BIT RATE TELECOMMUNICATION NETWORKS - AERIAL CABLES |
99/201485 DC : DRAFT MAR 99 | EN 50288 SERIES - MULIT-ELEMENT METALLIC CABLES USED IN ANALOGUE AND DIGITAL COMMUNICATION AND CONTROL - PART 1: GENERIC SPECIFICATION; PART 2-1: SS FOR SCREENED CABLES CHARACTERISED UP TO 100 MHZ - HORIZONTAL AND BUILDING BACKBONE CABLE: PART 2-2: SS FOR SCREENED CABLES CHARACTERISED UP TO 100 MHZ - WORK AREA & PATCH CORD CABLES; PART 3-1: SS FOR UNSCREENED CABLES CONT: |
BS EN 61869-4:2014 | Instrument transformers Additional requirements for combined transformers |
BS EN 60034-18-34:2012 | Rotating electrical machines Functional evaluation of insulation systems. Test procedures for form-wound windings. Evaluation of thermomechanical endurance of insulation systems |
CEI EN 62689-1 : 1ED 2017 | CURRENT AND VOLTAGE SENSORS OR DETECTORS, TO BE USED FOR FAULT PASSAGE INDICATION PURPOSES - PART 1: GENERAL PRINCIPLES AND REQUIREMENTS |
DD IEC PAS 60044-5 : DRAFT SEP 2002 | INSTRUMENT TRANSFORMERS - PART 5: CAPACITOR VOLTAGE TRANSFORMERS |
BS IEC 60287-1-1 : 2006 | ELECTRIC CABLES - CALCULATION OF THE CURRENT RATING - PART 1-1: CURRENT RATING EQUATIONS (100% LOAD FACTOR) AND CALCULATION OF LOSSES - GENERAL |
PREN 2234 : 200P3 | AEROSPACE SERIES - CABLE, ELECTRICAL, FIRE RESISTANT - TECHNICAL SPECIFICATION |
PREN 50407-2 : DRAFT 2012 | MULTI-PAIR CABLES USED IN HIGH BITE RATE DIGITAL ACCESS TELECOMMUNICATION NETWORKS - PART 2: INDOOR MULTI-PAIR/QUAD CABLES FOR INSTALLATION IN MULTI DWELLING UNITS SHAFT SUPPORTING UNIVERSAL SERVICES, XDSL AND APPLICATIONS UP TO 100 MBITS OVER IP |
CSA C60044-8 : 2007 : R2011 | INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRANSFORMERS |
CEI EN 61869-4 : 2014 | INSTRUMENT TRANSFORMERS - PART 4: ADDITIONAL REQUIREMENTS FOR COMBINED TRANSFORMERS |
CEI EN 60708 : 2006 | LOW-FREQUENCY CABLES WITH POLYOLEFIN INSULATION AND MOISTURE BARRIER POLYOLEFIN SHEATH |
ISO 4738:1982 | Copper drawing stock (wire rod) |
XP PREN 2234 : 1995 XP | AEROSPACE SERIES - FIRE RESISTING ELECTRICAL CABLES - TECHNICAL SPECIFICATION |
I.S. EN 61196-2:2003 | RADIO-FREQUENCY CABLES - PART 2: SECTIONAL SPECIFICATION FOR SEMI-RIGID RADIO-FREQUENCY AND COAXIAL CABLES WITH POLYTETRAFLUOROETHYLENE (PTFE) INSULATION |
IEC 62689-1:2016 | Current and voltage sensors or detectors, to be used for fault passage indication purposes - Part 1: General principles and requirements |
UNE-EN 50288-1:2013 | Multi-element metallic cables used in analogue and digital communication and control - Part 1: Generic specification |
UNE-EN 1977:2013 | Copper and copper alloys - Copper drawing stock (wire rod) |
IEC 60044-1:1996+AMD1:2000+AMD2:2002 CSV | Instrument transformers - Part 1: Current transformers |
I.S. EN 1977:2013 | COPPER AND COPPER ALLOYS - COPPER DRAWING STOCK (WIRE ROD) |
I.S. EN 1976:2012 | COPPER AND COPPER ALLOYS - CAST UNWROUGHT COPPER PRODUCTS |
DIN EN 1977:2013-04 | COPPER AND COPPER ALLOYS - COPPER DRAWING STOCK (WIRE ROD) |
VDE 0418-12 : 1995 | CLASSES 0,5, 1 AND 2 ALTERNATING CURRENT WATT HOUR METERS |
VDE 0414-2 : 99 AMD 1 2001 | INSTRUMENT TRANSFORMERS - PART 1: INDUCTIVE VOLTAGE TRANSFORMERS |
NEMA CC1 : 2009(R2015) | ELECTRIC POWER CONNECTORS FOR SUBSTATIONS |
UTEC 93 533 : 2009 | CABLES WITH POLYVINYL CHLORIDE INSULATION AND POLYVINYL CHLORIDE SHEATH FOR CABLING AND INDOOR INSTALLATION OF TRANSMISSION EQUIPMENTS - GENERIC SPECIFICATION |
I.S. EN 50288-1:2013 | MULTI-ELEMENT METALLIC CABLES USED IN ANALOGUE AND DIGITAL COMMUNICATION AND CONTROL - PART 1: GENERIC SPECIFICATION |
14/30284930 DC : 0 | BS EN 62689-2 ED 1.0 - CURRENT AND VOLTAGE SENSORS OR DETECTORS TO BE USED FOR FAULT PASSAGE INDICATION PURPOSES - PART 2: GENERAL PRINCIPLES AND REQUIREMENTS |
BS 6561:1985 | Specification for zinc alloy sheet and strip for building |
NFC 93 552 : 95 XP | ELECTRONIC COMPONENTS - COAXIAL CABLES FOR INSTALLATION OF TRANSMISSION EQUIPMENTS - GENERIC SPECIFICATION |
UTEC 93 529-2 : 2004 | CABLES FOR DIGITAL TELEPHONE NETWORK AT 2 MHZ - DIGITAL SYT SERIES |
BS 5714:1979 | Method of measurement of resistivity of metallic materials |
BS EN 62012-1:2002 | Multicore and symmetrical pair/quad cables for digital communications to be used in harsh environments Generic specification |
BS EN 50288-1:2013 | Multi-element metallic cables used in analogue and digital communication and control Generic specification |
BS 7626:1993 | Specification for current transformers |
02/209111 DC : DRAFT SEP 2002 | PREN 50288-1 - MULTI-ELEMENT METALLIC CABLES USED IN ANALOGUE AND DIGITAL COMMUNICATION AND CONTROL - PART 1: GENERIC SPECIFICATION |
NF EN 60044-1 : 2000 AMD 2 2003 | INSTRUMENT TRANSFORMERS - PART 1: CURRENT TRANSFORMERS |
11/30213786 DC : 0 | BS EN 50463-2 - RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 2: ENERGY MEASURING |
CEI EN 50406-2 : 2006 | END USER MULTI-PAIR CABLES USED IN HIGH BIT RATE TELECOMMUNICATION NETWORKS - PART 2: DUCT AND BURIED CABLES |
BS EN 61869-3:2011 | Instrument transformers Additional requirements for inductive voltage transformers |
BS 91:1998 | Electric cable soldering sockets. Specification |
NF EN 50117-1 : 2002 AMD 2 2013 | COAXIAL CABLES - PART 1: GENERIC SPECIFICATION |
15/30327763 DC : 0 | BS EN 2234 - AEROSPACE SERIES - CABLE, ELECTRICAL, FIRE RESISTANT - TECHNICAL SPECIFICATION |
05/30131385 DC : DRAFT MAR 2005 | IEC 61156-1 ED 3 - MULTICORE AND SYMMETRICAL PAIR/QUAD CABLES FOR DIGITAL COMMUNICATIONS - PART 1: GENERIC SPECIFICATION |
EN 50463-2:2017 | Railway applications - Energy measurement on board trains - Part 2: Energy measuring |
NF EN 60044-8 : 2006 | INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRANSDUCERS |
IEC 61869-10:2017 | Instrument transformers - Part 10: Additional requirements for low-power passive current transformers |
CSA C60044-2 : 2007 | INSTRUMENT TRANSFORMERS - PART 2: INDUCTIVE VOLTAGE TRANSFORMERS |
CSA C60044-8 :2007 | INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRANSFORMERS |
I.S. EN 2234:2012 | AEROSPACE SERIES - CABLE, ELECTRICAL, FIRE RESISTANT - TECHNICAL SPECIFICATION |
CSA C60044-2 : 2007 : R2011 | INSTRUMENT TRANSFORMERS - PART 2: INDUCTIVE VOLTAGE TRANSFORMERS |
I.S. EN 61869-1:2009 | INSTRUMENT TRANSFORMERS - PART 1: GENERAL REQUIREMENTS |
I.S. EN 50407-1:2004 | MULTI-PAIR CABLES USED IN HIGH BIT RATE DIGITAL ACCESS TELECOMMUNICATION NETWORKS - PART 1: OUTDOOR CABLES |
CEI 20-21/1-1 : 2007 | ELECTRIC CABLES - CALCULATION OF THE CURRENT RATING - PART 1-1: CURRENT RATING EQUATIONS (100% LOAD FACTOR) AND CALCULATION OF LOSSES - GENERAL |
UNI EN 2234 : 2012 | AEROSPACE SERIES - CABLE, ELECTRICAL, FIRE RESISTANT - TECHNICAL SPECIFICATION |
I.S. EN 62689-1:2016 | CURRENT AND VOLTAGE SENSORS OR DETECTORS, TO BE USED FOR FAULT PASSAGE INDICATION PURPOSES - PART 1: GENERAL PRINCIPLES AND REQUIREMENTS |
IEC PAS 62255-1:2001 | Multi-pair cables used in high bit rate digital access telecommunication networks - Part 1: Outdoor cables |
CSA C61869-1 : 2014 | INSTRUMENT TRANSFORMERS - PART 1: GENERAL REQUIREMENTS |
IEC 60189-3:2007 | Low-frequency cables and wires with PVC insulation and PVC sheath - Part 3: Equipment wires with solid or stranded conductor wires, PVC insulated, in singles, pairs and triples |
CSA C61869-4 : 2014 | INSTRUMENT TRANSFORMERS - PART 4: ADDITIONAL REQUIREMENTS FOR COMBINED TRANSFORMERS |
IEC 61196-2:1995 | Radio-frequency cables - Part 2: Sectional specification for semi-rigid radio-frequency and coaxial cables with polytetrafluoroethylene (PTFE) insulation |
IEC 62255-1:2003 | Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 1: Generic specification |
DIN EN 1976:2013-01 | COPPER AND COPPER ALLOYS - CAST UNWROUGHT COPPER PRODUCTS |
IEC 60044-8:2002 | Instrument transformers - Part 8: Electronic current transformers |
BS EN 4434:2005 | Aerospace series. Copper or copper alloy lightweight conductors for electrical cables. Product standard (normal and tight tolerances) |
IEC 60044-5:2004 | Instrument transformers - Part 5: Capacitor voltage transformers |
IEC 61869-3:2011 | Instrument transformers - Part 3: Additional requirements for inductive voltage transformers |
UNE-EN 61869-1:2010 | Instrument transformers -- Part 1: General requirements |
UNI EN 1976 : 2012 | COPPER AND COPPER ALLOYS - CAST UNWROUGHT COPPER PRODUCTS |
UNI EN 1977 : 2013 | COPPER AND COPPER ALLOYS - COPPER DRAWING STOCK (WIRE ROD) |
EN 50117-1 : 2002 AMD 2 2013 | COAXIAL CABLES - PART 1: GENERIC SPECIFICATION |
BS EN 60044-2:1999 | Instrument transformers Inductive voltage transformers |
BS EN 2234:2012 | Aerospace series. Cable, electrical, fire resistant. Technical specification |
CEI EN 60044-8 : 2004 | INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRASFORMERS |
BS 807:1955 | Specification for spot welding electrodes |
11/30255235 DC : 0 | BS EN 50288-1 - MULTI-ELEMENT METALIC CABLES USED IN ANALOUGE AND DIGITAL COMUNICATION AND CONTROL - PART 1: GENEIC SPECIFICATION |
11/30247044 DC : 0 | BS EN 4674-002 - AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - SELF-WRAPPING SHIELDING (EMI) PROTECTIVE SLEEVE - PART 002: GENERAL AND LIST OF PRODUCT STANDARD |
BIS IS/IEC 60044-1 : 2003 | INSTRUMENT TRANSFORMERS - PART 1: CURRENT TRANSFORMERS |
BS EN 61095:1993 | Specification for electromechanical contactors for household and similar purposes |
HD 553 : 200S2 | CURRENT TRANSFORMERS |
BS EN 62689-1:2016 | Current and voltage sensors or detectors, to be used for fault passage indication purposes General principles and requirements |
EN 62689-1:2016 | Current and voltage sensors or detectors, to be used for fault passage indication purposes - Part 1: General principles and requirements |
CEI EN 61869-3 : 2012 | INSTRUMENT TRANSFORMERS - PART 3: ADDITIONAL REQUIREMENTS FOR INDUCTIVE VOLTAGE TRANSFORMERS |
BS 7769-1.1:1997 | Electric cables. Calculation of the current rating. Current rating equations (100% load factor) and calculation of losses General |
04/30126724 DC : DRAFT DEC 2004 | IEC 60189-3 ED.4 - LOW-FREQUENCY CABLES AND WIRES WITH PVC INSULATION AND PVC SHEATH - PART 3: EQUIPMENT WIRES WITH SOLID OR STRANDED CONDUCTOR, PVC INSULATED, IN SINGLES, PAIRS AND TRIPLES |
UNE-EN 61869-4:2017 | Instrument transformers - Part 4: Additional requirements for combined transformers |
03/304032 DC : DRAFT MAR 2003 | EN 50406-2 - END USER MULTI-PAIR CABLES USED IN HIGH BIT RATE TELECOMMUNICATION NETWORKS - DUCT AND BURIED CABLES |
I.S. EN 61869-3:2011 | INSTRUMENT TRANSFORMERS - PART 3: ADDITIONAL REQUIREMENTS FOR INDUCTIVE VOLTAGE TRANSFORMERS (IEC 61869-3:2011) |
CSA C61869-3 : 2014 | INSTRUMENT TRANSFORMERS - PART 3: ADDITIONAL REQUIREMENTS FOR INDUCTIVE VOLTAGE TRANSFORMERS |
13/30281408 DC : 0 | BS EN 61869-10 - INSTRUMENT TRANSFORMERS - PART 10: ADDITIONAL REQUIREMENTS FOR LOW-POWER, STAND-ALONE CURRENT SENSORS |
UNE-EN 61869-3:2012 | Instrument transformers - Part 3: Additional requirements for inductive voltage transformers |
17/30354704 DC : 0 | BS ISO 19642-1 - ROAD VEHICLES - AUTOMOTIVE CABLES - PART 1: TERMINOLOGY AND DESIGN GUIDELINES |
CEI EN 62012-1 : 2003 | MULTICORE AND SYMMETRICAL PAIR/QUAD CABLES FOR DIGITAL COMMUNICATIONS TO BE USED IN HARSH ENVIRONMENT - PART 1: GENERIC SPECIFICATION |
BS EN 50290-2-1:2005 | Communication cables Common design rules and construction |
12/30260599 DC : 0 | BS EN 50407-2 - MULTI-PAIR CABLES USED IN HIGH BITE RATE DIGITAL ACCESS TELECOMMUNICATION NETWORKS - PART 2: INDOOR MULTI-PAIR/QUAD CABLES FOR INSTALLATION IN MULTI DWELLING UNITS SHAFT SUPPORTING UNIVERSAL SERVICES, XDSL AND APPLICATIONS UP TO 100 MBITS OVER IP |
BS EN 61196-2:2003 | Radio-frequency cables. Specifications. Sectional specification for semi-rigid radio-frequency and coaxial cables with polytetrafluoroethylene (PTFE) insulation |
BS 6017:1981 | Specification for copper refinery shapes |
DD ENV 50196:1995 | Live working. Required insulation level and related air distances. Calculation method |
I.S. EN 60044-5:2004 | INSTRUMENT TRANSFORMERS - PART 5: CAPACITOR VOLTAGE TRANSFORMERS |
VDE 0414-1 : 2001 | INSTRUMENT TRANSFORMERS - PART 1: CURRENT TRANSFORMERS |
CSA C60044-1 : 2007 : R2011 | INSTRUMENT TRANSFORMERS - PART 1: CURRENT TRANSFORMERS |
CSA C60044-1 : 2007 | INSTRUMENT TRANSFORMERS - PART 1: CURRENT TRANSFORMERS |
NFC 93 533 : 94 AMD 1 96 XP | ELECTRONIC COMPONENTS - CABLES WITH PVC INSULATION AND PVC SHEATH FOR WIRING AND INDOOR TRANSMISSION EQUIPMENT - GENERIC SPECIFICATION |
NF EN 60034-18-34 : 2013 | ROTATING ELECTRICAL MACHINES - PART 18-34: FUNCTIONAL EVALUATION OF INSULATION SYSTEMS - TEST PROCEDURES FOR FORM-WOUND WINDINGS - EVALUATION OF THERMOMECHANICAL ENDURANCE OF INSULATION SYSTEMS |
I.S. EN 61869-4:2014 | INSTRUMENT TRANSFORMERS - PART 4: ADDITIONAL REQUIREMENTS FOR COMBINED TRANSFORMERS |
UNE 212002-2:2014 | Low-frequency cables and wires with PVC insulation and PVC sheath. Part 2: Cables in pairs, triples, quads and quintuples for inside installations. |
CEI EN 50463-2 : 2013 | RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 2: ENERGY MEASURING |
NF EN 61095 : 2009 | ELECTROMECHANICAL CONTACTORS FOR HOUSEHOLD AND SIMILAR PURPOSES |
IEC 60287-1-1:2006+AMD1:2014 CSV | Electric cables - Calculation of the current rating - Part 1-1:Current rating equations (100 % load factor) and calculation of losses - General |
I.S. EN 50406-2:2004 | END USER MULTI-PAIR CABLES USED IN HIGH BIT RATE TELECOMMUNICATION NETWORKS - PART 2: DUCT AND BURIED CABLES |
I.S. EN 50406-1:2004 | END USER MULTI-PAIR CABLES USED IN HIGH BIT RATE TELECOMMUNICATION NETWORKS - PART 1: AERIAL CABLES |
IEC 62012-1:2002 | Multicore and symmetrical pair/quad cables for digital communications to be used in harsh environments - Part 1: Generic specification |
BS EN 1978:1998 | Copper and copper alloys. Copper cathodes |
97/200935 DC : DRAFT JAN 1997 | IEC 60364 - ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 5: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - REVISION OF CHAPTER 54: EARTHING ARRANGEMENTS AND PROTECTIVE CONDUCTORS |
IEC 60708:2005 | Low-frequency cables with polyolefin insulation and moisture barrier polyolefin sheath |
IEC 60034-18-34:2012 | Rotating electrical machines - Part 18-34: Functional evaluation of insulation systems - Test procedures for form-wound windings - Evaluation of thermomechanical endurance of insulation systems |
BS EN 2346-003:2006 | Aerospace series. Cable, electrical, fire resistant. Operating temperatures between -65°C and 260°C DL family, single core. Product standard |
IEC 61095:2009 | Electromechanical contactors for household and similar purposes |
BS EN 2083:2001 | Aerospace series. Copper and copper alloy conductors for electrical cables. Product standard |
BS EN 2346-004:2006 | Aerospace series. Cable, electrical, fire resistant. Operating temperatures between -65°C and 260°C DN family, single UV laser printable and multicore assembly. Light weight. Product standard |
EN 61196-2:2003 | Radio-frequency cables - Part 2: Sectional specification for semi-rigid radio-frequency and coaxial cables with polytetrafluoroethylene (PTFE) insulation |
EN 2346-004:2006 | Aerospace series - Cable, electrical, fire resistant - Operating temperatures between - 65 C and 260 C - Part 004: DN family, single UV laser printable and multicore assembly - Light weight - Product standard |
EN 4434:2005 | Aerospace series - Copper or copper alloy lightweight conductors for electrical cables - Product standard (Normal and tight tolerances) |
EN 2346-002:2006 | Aerospace series - Cable, electrical, fire resistant - Operating temperatures between - 65 °C and 260 °C - Part 002: General |
EN 2346-003:2006 | Aerospace series - Cable, electrical, fire resistant - Operating temperatures between - 65 °C and 260 °C - Part 003: DL family, single core - Product standard |
EN 2083 : 2001 | AEROSPACE SERIES - COPPER AND COPPER ALLOY CONDUCTORS FOR ELECTRICAL CABLES - PRODUCT STANDARD |
EN 1977:2013 | Copper and copper alloys - Copper drawing stock (wire rod) |
EN 1976:2012 | Copper and copper alloys - Cast unwrought copper products |
EN 2234:2018 | Aerospace series - Cable, electrical, fire resistant - Technical specification |
01/710719 DC : DRAFT JUL 2001 | PREN 4608-001 - AEROSPACE SERIES - CABLE, ELECTRICAL, FIRE RESISTANT - SINGLE AND MULTICORE ASSEMBLY, SCREENED AND JACKETED - PART 001: TECHNICAL SPECIFICATION |
IEC 60092-375:1977 | Electrical installations in ships. Shipboard telecommunication cables and radio-frequency cables. General instrumentation, control and communication cables |
03/316192 DC : DRAFT SEP 2003 | IEC 60708-1 ED 2 - LOW-FREQUENCY CABLES WITH POLYOLEFIN INSULATION AND MOISTURE BARRIER POLYOLEFIN SHEATH - PART 1: GENERAL DESIGN DETAILS AND REQUIREMENTS |
BS EN 62004:2009 | Thermal-resistant aluminium alloy wire for overhead line conductor |
CEI EN 62004 : 2010 | THERMAL-RESISTANT ALUMINIUM ALLOY WIRE FOR OVERHEAD LINE CONDUCTOR |
03/308375 DC : DRAFT JUNE 2003 | IEC 61196-1 - COAXIAL COMMUNICATION CABLES - PART 1: GENERIC SPECIFICATION - GENERAL, DEFINITIONS AND REQUIREMENTS |
06/30155398 DC : 0 | EN 2234 - CABLES, ELECTRICAL, FIRE RESISTANT - TECHNICAL SPECIFICATION |
BS 5685-1:1979 | Electricity meters Specification for Class 0.5, 1 and 2 single-phase and polyphase, single rate and multi-rate watt-hour meters |
I.S. EN 62004:2009 | THERMAL RESISTANT ALUMINIUM ALLOY WIRE FOR OVERHEAD LINE CONDUCTOR |
BS DD IEC PAS 62255-1 : 2001 | MULTI-PAIR CABLES USED IN HIGH BIT RATE DIGITAL ACCESS TELECOMMUNICATION NETWORKS - PART 1: OUTDOOR CABLES |
RC.AERO 54305 : A1962 | |
I.S. EN 50407-3:2014 | MULTI-PAIR CABLES USED IN HIGH BIT RATE DIGITAL ACCESS TELECOMMUNICATIONS NETWORKS - PART 3: INDOOR MULTI-PAIR/QUAD RISER CABLES UP TO 100 MHZ FOR MAXIMUM LENGTH OF CONNECTION 100 M SUPPORTING UNIVERSAL SERVICES, XDSL AND APPLICATIONS UP TO 100 MBIT/S OVER IP |
BS EN 50407-1:2004 | Multi-pair cables used in high bit rate digital access telecommunication networks Outdoor cables |
98/203654 DC : DRAFT JULY 1998 | |
02/207659 DC : DRAFT JULY 2002 | PREN 50290-2-1 - COMMUNICATION CABLES - PART 2-1: COMMON DESIGN RULES AND CONSTRUCTION |
09/30194359 DC : 0 | BS EN 60034-18-34 - ROTATING ELECTRICAL MACHINES - PART 18-34: FUNCTIONAL EVALUATION OF INSULATION SYSTEMS - TEST PROCEDURES FOR FORM-WOUND WINDINGS - EVALUATION OF THERMOMECHANICAL ENDURANCE OF INSULATION SYSTEMS |
PREN 2346-005 : 200P3 | AEROSPACE SERIES - CABLE, ELECTRICAL, FIRE RESISTANT - OPERATING TEMPERATURES BETWEEN -65 DEGREES C AND 260 DEGREES C - PART 005: DW FAMILY, SINGLE UV LASER PRINTABLE AND MULTICORE ASSEMBLY - LIGHT WEIGHT - PRODUCT STANDARD |
BS EN 50117-1 : 2002 | COAXIAL CABLES - PART 1: GENERIC SPECIFICATION |
PREN 2083 : 2 | AEROSPACE SERIES - COPPER OR COPPER ALLOY CONDUCTORS FOR ELECTRICAL CABLES - PRODUCT STANDARD |
CEI EN 61869-1 : 2010 | INSTRUMENT TRANSFORMERS - PART 1: GENERAL REQUIREMENTS |
UNE 21144-1-1:2012 | Electric cables - Calculation of the current rating - Part 1-1: Current rating equations (100 % load factor) and calculation of losses - General |
I.S. EN 61095:2009 | ELECTROMECHANICAL CONTACTORS FOR HOUSEHOLD AND SIMILAR PURPOSES |
IEC 60189-1:2007 | Low-frequency cables and wires with PVC insulation and PVC sheath - Part 1: General test and measuring methods |
IEC 62004:2007 | Thermal-resistant aluminium alloy wire for overhead line conductor |
IEC 61196-1:2005 | Coaxial communication cables - Part 1: Generic specification - General, definitions and requirements |
I.S. EN 2346-005:2017 | AEROSPACE SERIES - CABLE, ELECTRICAL, FIRE RESISTANT - OPERATING TEMPERATURES BETWEEN -65 DEGREES C AND 260 DEGREES C - PART 005: DW FAMILY, SINGLE UV LASER PRINTABLE AND MULTICORE ASSEMBLY - LIGHT WEIGHT - PRODUCT STANDARD |
UNE 212002-1:2014 | Low-frequency cables and wires with PVC insulation and PVC sheath. Part 1: General test and measuring methods. |
EN 2346-005:2017 | Aerospace series - Cable, electrical, fire resistant - Operating temperatures between -65 °C and 260 °C - Part 005: DW family, single UV laser printable and multicore assembly - Light weight - Product standard |
IEC PAS 60044-5:2002 | Instrument transformers - Part 5: Capacitor voltage transformers |
I.S. EN 50290-2-1:2005 | COMMUNICATION CABLES - PART 2-1: COMMON DESIGN RULES AND CONSTRUCTION |
IEC 61869-1:2007 | Instrument transformers - Part 1: General requirements |
IEC 62888-2:2018 | Railway applications - Energy measurement on board trains - Part 2: Energy measurement |
I.S. EN 61196-3:1999 | RADIO FREQUENCY CABLES - PART 3: SECTIONAL SPECIFICATION FOR COAXIAL CABLES FOR LOCAL AREA NETWORKS |
BS EN 2346-002:2006 | Aerospace series. Cable, electrical, fire resistant. Operating temperatures between -65°C and 260°C General |
IEC 61196-3:1998 | Radio frequency cables - Part 3: Sectional specification for coaxial cables for use in local area networks |
BS EN 1977:2013 | Copper and copper alloys. Copper drawing stock (wire rod) |
IEC 60044-2:1997+AMD1:2000+AMD2:2002 CSV | Instrument transformers - Part 2 : Inductive voltage transformers |
EN 50407-1:2004 | Multi-pair cables used in high bit rate digital access telecommunication networks - Part 1: Outdoor cables |
EN 62004:2009 | Thermal-resistant aluminium alloy wire for overhead line conductor |
EN 61869-1:2009 | Instrument transformers - Part 1: General requirements |
EN 60044-1:1999/A2:2003 | INSTRUMENT TRANSFORMERS - PART 1: CURRENT TRANSFORMERS |
EN 62012-1:2002 | Multicore and symmetrical pair/quad cables for digital communications to be used in harsh environments - Part 1: Generic specification |
EN 60708:2005/AC:2016-08 | LOW-FREQUENCY CABLES WITH POLYOLEFIN INSULATION AND MOISTURE BARRIER POLYOLEFIN SHEATH |
EN 60044-8:2002 | Instrument transformers - Part 8: Electronic current transformers |
EN 61196-3:1998 | Radio frequency cables - Part 3: Sectional specification for coaxial cables for local area networks |
EN 60044-2:1999/A2:2003 | INSTRUMENT TRANSFORMERS - PART 2: INDUCTIVE VOLTAGE TRANSFORMERS |
EN 50406-2:2004 | End user multi-pair cables used in high bit rate telecommunication networks - Part 2: Duct and buried cables |
EN 50407-3:2014 | Multi-pair cables used in high bit rate digital access telecommunications networks - Part 3: Indoor multi-pair/quad riser cables up to 100 MHz for maximum length of connection 100 m supporting universal services, xDSL and applications up to 100 Mbit/s over IP |
EN 50290-2-1:2005 | Communication cables - Part 2-1: Common design rules and construction |
EN 61095:2009 | Electromechanical contactors for household and similar purposes |
AS 61869.4:2021 | Instrument transformers Additional requirements for combined transformers (IEC 61869-4:2013 (ED.1.0) MOD) |
AS 61869.10:2021 | Instrument transformers Additional requirements for low-power passive current transformers (IEC 61869-10:2017 (ED 1.0) MOD) |
AS 61869.3:2021 | Instrument transformers Additional requirements for inductive voltage transformers (IEC 61869-3:2011 (ED.1.0) MOD) |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.