|
EN 13282-1:2013
|
Hydraulic road binders - Part 1: Rapid hardening hydraulic road binders - Composition, specifications and conformity criteria |
|
ISO/IEC 17025:2005
|
General requirements for the competence of testing and calibration laboratories |
|
CEN/TR 15177 : 2006
|
TESTING THE FREEZE-THAW RESISTANCE OF CONCRETE - INTERNAL STRUCTURAL DAMAGE |
|
EN 196-7 : 2007
|
METHODS OF TESTING CEMENT - PART 7: METHODS OF TAKING AND PREPARING SAMPLES OF CEMENT |
|
CEN/TS 16516 : 2013
|
CONSTRUCTION PRODUCTS - ASSESSMENT OF RELEASE OF DANGEROUS SUBSTANCES - DETERMINATION OF EMISSIONS INTO INDOOR AIR |
|
EN 196-2:2013
|
METHOD OF TESTING CEMENT - PART 2: CHEMICAL ANALYSIS OF CEMENT |
|
EN 197-1:2011
|
Cement - Part 1: Composition, specifications and conformity criteria for common cements |
|
CEN/TS 16637-2 : 2014
|
CONSTRUCTION PRODUCTS - ASSESSMENT OF RELEASE OF DANGEROUS SUBSTANCES - PART 2: HORIZONTAL DYNAMIC SURFACE LEACHING TEST |
|
EN 459-2:2010
|
BUILDING LIME - PART 2: TEST METHODS |
|
EN 12350-2 : 2009
|
TESTING FRESH CONCRETE - PART 2: SLUMP-TEST |
|
EN 196-5:2011 (edition 2)
|
Methods of testing cement - Part 5: Pozzolanicity test for pozzolanic cement |
|
EN 197-2:2014
|
Cement - Part 2: Conformity evaluation |
|
CEN/TR 196-4 : 2007
|
METHODS OF TESTING CEMENT - PART 4: QUANTITATIVE DETERMINATION OF CONSTITUENTS |
|
EN 459-1:2015
|
BUILDING LIME - PART 1: DEFINITIONS, SPECIFICATIONS AND CONFORMITY CRITERIA |
|
EN 15743:2010+A1:2015
|
SUPERSULFATED CEMENT - COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA |
|
ISO 9286:1997
|
Abrasive grains and crude Chemical analysis of silicon carbide |
|
EN 12390-11 : 2015
|
TESTING HARDENED CONCRETE - PART 11: DETERMINATION OF THE CHLORIDE RESISTANCE OF CONCRETE, UNIDIRECTIONAL DIFFUSION |
|
EN 933-9:2009+A1:2013
|
TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 9: ASSESSMENT OF FINES - METHYLENE BLUE TEST |
|
EN 14647:2005/AC:2006
|
CALCIUM ALUMINATE CEMENT - COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA |
|
EN 196-1:2016 (edition 2)
|
Methods of testing cement - Part 1: Determination of strength |
|
CEN/TR 15678 : 2008
|
CONCRETE - RELEASE OF REGULATED DANGEROUS SUBSTANCES INTO SOIL, GROUNDWATER AND SURFACE WATER - TEST METHOD FOR NEW OR UNAPPROVED CONSTITUENTS OF CONCRETE AND FOR PRODUCTION CONCRETES |
|
EN 196-10:2016
|
METHODS OF TESTING CEMENT - PART 10: DETERMINATION OF THE WATER-SOLUBLE CHROMIUM (6) CONTENT OF CEMENT |
|
EN 14216:2015
|
CEMENT - COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA FOR VERY LOW HEAT SPECIAL CEMENTS |
|
EN 13639:2017 (edition 2)
|
Determination of total organic carbon in limestone |
|
EN 413-1:2011
|
MASONRY CEMENT - PART 1: COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA |
|
EN 13282-2 : 2015
|
HYDRAULIC ROAD BINDERS - PART 2: NORMAL HARDENING HYDRAULIC ROAD BINDERS - COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA |
|
CEN/TS 12390-9:2016
|
TESTING HARDENED CONCRETE - PART 9: FREEZE-THAW RESISTANCE WITH DE-ICING SALTS - SCALING |
|
EN 451-1:2017
|
Method of testing fly ash - Part 1: Determination of free calcium oxide content |
|
EN 450-1:2012
|
FLY ASH FOR CONCRETE - PART 1: DEFINITION, SPECIFICATIONS AND CONFORMITY CRITERIA |
|
EN 413-2:2016 (edition 2)
|
Masonry cement - Part 2: Test methods |
|
ISO/IEC Guide 2:2004
|
Standardization and related activities General vocabulary |
|
EN 12878:2014
|
Pigments for the colouring of building materials based on cement and/or lime - Specifications and methods of test |
|
EN 45020 : 2006
|
STANDARDIZATION AND RELATED ACTIVITIES - GENERAL VOCABULARY |
|
EN 196-8:2010 (edition 2)
|
Methods of testing cement - Part 8: Heat of hydration - Solution method |
|
EN 196-3:2016 (edition 2)
|
Methods of testing cement - Part 3: Determination of setting times and soundness |
|
EN 196-9:2010 (edition 2)
|
Methods of testing cement - Part 9: Heat of hydration - Semi-adiabatic method |
|
ISO 9277:2010
|
Determination of the specific surface area of solids by gas adsorption — BET method |
|
EN 480-11:2005
|
Admixtures for concrete, mortar and grout - Test methods - Part 11: Determination of air void characteristics in hardened concrete |
|
CEN/TR 16045 : 2010
|
CONSTRUCTION PRODUCTS - ASSESSMENT OF RELEASE OF DANGEROUS SUBSTANCES - CONTENT OF REGULATED DANGEROUS SUBSTANCES - SELECTION OF ANALYTICAL METHODS |
|
EN 206:2013+A1:2016
|
CONCRETE - SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY |
|
CEN/TS 12390-10 : 2007
|
TESTING HARDENED CONCRETE - PART 10: DETERMINATION OF THE RELATIVE CARBONATION RESISTANCE OF CONCRETE |
|
CEN/TR 16563 : 2013
|
PRINCIPLES OF THE EQUIVALENT DURABILITY PROCEDURE |
|
EN 15368:2008+A1:2010
|
Hydraulic binder for non-structural applications - Definition, specifications and conformity criteria |