REQUIREMENTS FOR HEAT EXCHANGERS FOR HM SURFACE SHIPS AND SUBMARINES

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

08-07-2015

Publisher

UK Ministry of Defence Standards

Foreword
1 Scope
2 Warning
3 Normative References
4 Definitions
5 Abbreviations
6 Performance Specification
7 National/International Regulations
8 Requirements
9 Design Requirements/Guidance
10 Corporate Experience & Knowledge

Describes the general requirements for heat exchangers installed in HM Surface Ships and Submarines.

DevelopmentNote	Supersedes DEFSTAN 02-329/3(2010). (09/2015)
DocumentType	Standard
Pages	26
PublisherName	UK Ministry of Defence Standards
Status	Current
Supersedes	DEFSTAN 08-105/1(2000) : 2000 DEFSTAN 02-329/3(2010) : 2010 DEFSTAN 02-329/2(2005) : 2005

DEFSTAN 02-863/2(2010) : 2010	REQUIREMENTS FOR THE CLASSIFICATION, DIMENSIONS, TOLERANCES, WELD REPAIR AND GENERAL STANDARDS OF ACCEPTANCE FOR COPPER AND NICKEL ALLOY CASTINGS
DEFSTAN 02-703/2(2011) : 2011	THERMAL AND ACOUSTIC INSULATION OF HULL AND MACHINERY
BS EN 1653:1998	Copper and copper alloys. Plate, sheet and circles for boilers, pressure vessels and hot water storage units
DEFSTAN 02-374/2(2009) : 2009	RUBBER FLEXIBLE PIPES AND BELLOWS FOR USE IN SUBMARINES
BS EN 10222-4:2017	Steel forgings for pressure purposes Weldable fine grain steels with high proof strength
BS EN 10028-5:2017	Flat products made of steels for pressure purposes Weldable fine grain steels, thermomechanically rolled
BS EN 10217-4:2002	Welded steel tubes for pressure purposes. Technical delivery conditions Electric welded non-alloy steel tubes with specified low temperature properties
BS EN 10028-7:2007	Flat products made of steels for pressure purposes Stainless steels
DEFSTAN 05-10(PT2)/6(2013) : 2013	PRODUCT DEFINITION INFORMATION - PART 2: DIGITAL PRODUCT DEFINITION INFORMATION
BS EN 1676:2010	Aluminium and aluminium alloys. Alloyed ingots for remelting. Specifications
BS EN 10222-1:2017	Steel forgings for pressure purposes General requirements for open die forgings
DEFSTAN 02-833(PT2)/3(2011) : 2011	REQUIREMENTS FOR NICKEL ALUMINIUM BRONZE - PART 2: FORGINGS, FORGING STOCK, RODS AND SECTIONS
ASTM B 338 : 2017 : REDLINE	Standard Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers
BS MA 18:1973	Specification for salt water piping systems in ships
ASTM B 265 : 2015 : REDLINE	Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate
BS EN 10048:1997	Hot rolled narrow steel strip. Tolerances on dimensions and shape
DEFSTAN 02-745/2(2012) : 2012	CLASSIFICATION, INSPECTION REQUIREMENTS AND ACCEPTANCE STANDARDS FOR STEEL CASTINGS
DEFSTAN 02-341(PT1)/1(2000) : 2000	REQUIREMENTS FOR CLEANING OF ITEMS, COMPONENTS AND EQUIPMENT FOR FLUID SYSTEMS - PART 1: CLEANING CATEGORY 2
DEFSTAN 02-879(PT2)/1(2011) : 2011	REQUIREMENTS FOR COPPER ALLOY MATERIALS IN HM SUBMARINES AND SURFACE SHIPS NOT IN CLASS - PART 2: FORGINGS, FORGING STOCK, RODS AND SECTIONS
BS 2871-1:1971	Specification for copper and copper alloys. Tubes Copper tubes for water, gas and sanitation
DEFSTAN 01-5/17(2011) : 2011	FUELS, LUBRICANTS AND ASSOCIATED PRODUCTS
BS EN 10222-5:2017	Steel forgings for pressure purposes Martensitic, austenitic and austenitic-ferritic stainless steels
BS EN 10085:2001	Nitriding steel. Technical delivery conditions
BS EN 10028-6:2017	Flat products made of steels for pressure purposes Weldable fine grain steels, quenched and tempered
BS EN ISO 9445-2:2010	Continuously cold-rolled stainless steel. Tolerances on dimensions and form Wide strip and plate/sheet
BS EN 10217-2 : 2002	WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
DEFSTAN 08-123/2(2012) : 2012	REQUIREMENTS FOR DESIGN AND TESTING OF EQUIPMENTS TO MEET ENVIRONMENTAL CONDITIONS
DEFSTAN 02-747(PT4)/3(2012) : 2012	REQUIREMENTS FOR NICKEL ALUMINIUM BRONZE CASTINGS AND INGOTS - PART 4: NICKEL ALUMINIUM BRONZE NAVAL ALLOY SAND CASTINGS WITH WELDING PERMITTED TO THE NON-WETTED SURFACE (CLASS 1 AND 2 CASTINGS ONLY)
BS EN 10095:1999	Heat resisting steels and nickel alloys
DEFSTAN 08-118(PT1)/1(2000) : 2000	DESIGN GUIDE ON THE REDUCTION OF ACOUSTIC NOISE IN SURFACE SHIPS - CATEGORY 3 - PART 1: REDUCTION OF NOISE RADIATED UNDERWATER
BS EN 1057 : 2006	COPPER AND COPPER ALLOYS - SEAMLESS, ROUND COPPER TUBES FOR WATER AND GAS IN SANITARY AND HEATING APPLICATIONS
DEFSTAN 02-862(PT2)/3(2011) : 2011	NAVAL FASTENERS - PART 2: PROCUREMENT OF NON-FIRST LEVEL FASTENERS
BS EN 10250-4:2000	Open steel die forgings for general engineering purposes Stainless steels
BS EN 10051:2010	Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels. Tolerances on dimensions and shape
DEFSTAN 07-247(PT1)/3(2009) : 2009	THE SELECTION OF MATERIALS ON THE BASIS OF THEIR FIRE CHARACTERISTICS - PART 1: SELECTION OF MATERIALS ON THE BASIS OF THEIR FIRE CHARACTERISTICS
BS EN 10217-6:2002	Welded steel tubes for pressure purposes. Technical delivery conditions Submerged arc welded non-alloy steel tubes with specified low temperature properties
DEFSTAN 02-747(PT2)/3(2012) : 2012	REQUIREMENTS FOR NICKEL ALUMINIUM BRONZE CASTINGS AND INGOTS - PART 2: NICKEL ALUMINIUM BRONZE NAVAL ALLOY INGOTS AND SAND CASTING WITH WELDING PERMITTED TO THE WETTED SURFACE
DEFSTAN 02-878/1(2011) : 2011	NON-FERROUS TUBES AND PIPES FOR USE IN HM SUBMARINES AND SURFACE SHIPS NOT IN CLASS
BS EN 10028-1:2017	Flat products made of steels for pressure purposes General requirements
DEFSTAN 02-387/2(2001) : 2001	REQUIREMENTS FOR CHEMICAL CLEANING OF CHILLED WATER SYSTEMS FOR HM SURFACE SHIPS, SUBMARINES AND ROYAL FLEET AUXILIARY VESSELS
DEFSTAN 02-345/2(2013) : 2013	REQUIREMENTS FOR FLEXIBLE RUBBER PIPE ASSEMBLIES AND BELLOWS FOR USE IN SYSTEMS FROM VACUUM TO 20 BAR
BS EN 10028-3:2017	Flat products made of steels for pressure purposes Weldable fine grain steels, normalized
BS EN 1654:1998	Copper and copper alloys. Strip for springs and connectors
BS EN 10216-3:2013	Seamless steel tubes for pressure purposes. Technical delivery conditions Alloy fine grain steel tubes
BS EN 1652:1998	Copper and copper alloys. Plate, sheet, strip and circles for general purposes
DEFSTAN 02-862(PT1)/3(2011) : 2011	NAVAL FASTENERS - PART 1: MATERIAL SELECTION AND USE
BS EN 10087:1999	Free cutting steels. Technical delivery conditions for semi-finished products, hot rolled bars and rods
BS EN 1559-4:2015	Founding. Technical conditions of delivery Additional requirements for aluminium alloy castings
BS EN 10084:2008	Case hardening steels. Technical delivery conditions
DEFSTAN 02-879(PT1)/1(2011) : 2011	REQUIREMENTS FOR COPPER ALLOY MATERIALS IN HM SUBMARINES AND SURFACE SHIPS NOT IN CLASS - PART 1: SHEET, STRIP AND PLATE
BS EN 10028-2:2017	Flat products made of steels for pressure purposes Non-alloy and alloy steels with specified elevated temperature properties
DEFSTAN 02-743(PT1)/3(2012) : 2012	PIPE MANIPULATION - PART 1: BENDING OF PIPES
BS EN 10029:2010	Hot-rolled steel plates 3 mm thick or above. Tolerances on dimensions and shape
BS EN 10217-5:2002	Welded steel tubes for pressure purposes. Technical delivery conditions Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties
BS EN 10028-4:2017	Flat products made of steels for pressure purposes Nickel alloy steels with specified low temperature properties
DEFSTAN 02-747(PT3)/2(2011) : 2011	REQUIREMENTS FOR NICKEL ALUMINIUM BRONZE CASTINGS AND INGOTS - PART 3: NICKEL ALUMINIUM BRONZE COMMERCIAL ALLOY INGOTS AND SAND CASTINGS
BS 2871-2:1972	Specification for copper and copper alloys. Tubes Tubes for general purposes
DEFSTAN 02-830/1(2010) : 2010	REQUIREMENTS FOR GUNMETAL INGOTS AND CASTINGS
DEFSTAN 05-10(PT1)/6(2013) : 2013	PRODUCT DEFINITION INFORMATION - PART 1: HARDCOPY/MICROFORM PRODUCT DEFINITION INFORMATION
BS EN 12449:2016	Copper and copper alloys. Seamless, round tubes for general purposes
BS EN 10217-3:2002	Welded steel tubes for pressure purposes. Technical delivery conditions Alloy fine grain steel tubes
DEFSTAN 05-10(PT0)/6(2013) : 2013	PRODUCT DEFINITION INFORMATION - PART 0: GENERAL INTRODUCTION TO PRODUCT DEFINITION INFORMATION
BS EN 1706:2010	Aluminium and aluminium alloys. Castings. Chemical composition and mechanical properties
DEFSTAN 02-824(PT1)/3(2013) : 2013	COPPER NICKEL CHROMIUM SAND CASTINGS AND INGOTS - PART 1: PRODUCTION REQUIREMENTS AND WELDING
DEFSTAN 02-303/3(2015) : 2015	LUBRICATING OIL SYSTEMS FOR PROPULSION AND GENERATION IN HM SURFACE SHIPS & SUBMARINES
BS EN 12451:2012	Copper and copper alloys. Seamless, round tubes for heat exchangers
BS EN 10216-1:2013	Seamless steel tubes for pressure purposes. Technical delivery conditions Non-alloy steel tubes with specified room temperature properties
BS EN 10269:2013	Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
DEFSTAN 02-862(PT3)/3(2011) : 2011	NAVAL FASTENERS - PART 3: PROCUREMENT OF FIRST LEVEL FASTENERS
BS EN 10222-2:2017	Steel forgings for pressure purposes Ferritic and martensitic steels with specified elevated temperatures properties
BS EN 10217-1:2002	Welded steel tubes for pressure purposes. Technical delivery conditions Non-alloy steel tubes with specified room temperature properties
DEFSTAN 02-330/3(2013) : 2013	REQUIREMENTS FOR MAIN PROPULSION PLANT CONDENSERS IN NUCLEAR POWERED SUBMARINES
BS EN 10216-4:2013	Seamless steel tubes for pressure purposes. Technical delivery conditions Non-alloy and alloy steel tubes with specified low temperature properties
DEFSTAN 02-747(PT1)/3(2012) : 2012	REQUIREMENTS FOR NICKEL ALUMINIUM BRONZE CASTINGS AND INGOTS - PART 1: NICKEL ALUMINIUM BRONZE NAVAL ALLOY CENTRIFUGALLY CAST
DEFSTAN 02-824(PT3)/1(2005) : 2005	COPPER NICKEL CHROMIUM SAND CASTINGS AND INGOTS - PART 3: PROCEDURES FOR REQUALIFICATION OF COPPER NICKEL CHROMIUM CASTINGS (CAT 1)
BS EN ISO 9445-1:2010	Continuously cold-rolled stainless steel. Tolerances on dimensions and form Narrow strip and cut lengths
BS 2871-3:1972	Specification for copper and copper alloys. Tubes Tubes for heat exchangers
DEFSTAN 08-120/2(2014) : 2014	REQUIREMENTS FOR DETERMINING THE SHOCK STRENGTH OF EQUIPMENT
DEFSTAN 02-900(PT3)/3(2014) : 2014	GENERAL NAVAL STANDARD - PART 3: SYSTEMS, GENERIC
DEFSTAN 02-824(PT2)/2(2005) : 2005	COPPER NICKEL CHROMIUM SAND CASTINGS - PART 2: GUIDE TO PRODUCTION METHODS
BS EN 10216-2:2013	Seamless steel tubes for pressure purposes. Technical delivery conditions Non-alloy and alloy steel tubes with specified elevated temperature properties
BS EN 10083-1:2006	Steels for quenching and tempering General technical delivery conditions
DEFSTAN 02-772/1(2007) : 2007	WELDING AND FABRICATION OF PIPEWORK, MACHINERY AND ENGINEERING COMPONENTS FOR HM SUBMARINES AND SURFACE SHIPS NOT IN CLASS
DEFSTAN 02-207/1(2012) : 2012	QUALITY MANAGEMENT FRAMEWORK AND REQUIREMENTS FOR MATERIEL SAFETY IN SUBMARINES
DEFSTAN 02-360/2(2001) : 2001	GUIDANCE TO THE SELECTION OF LOW PRESSURE METRIC STANDARD VALVES
DEFSTAN 02-102(PT1)/3(2005) : 2005	REQUIREMENTS FOR AIR-CONDITIONING AND VENTILATION - PART 1: HM SURFACE SHIPS AND ROYAL FLEET AUXILIARIES
BS EN 1559-1:2011	Founding. Technical conditions of delivery General
DEFSTAN 02-375/1(2000) : 2000	VALVE DESIGN AND MANUFACTURE CATEGORY 2
BS EN 10222-3:2017	Steel forgings for pressure purposes Nickel steels with specified low temperature properties
DEFSTAN 66-2/4(2003) : 2003	GAUGES, PRESSURE, DIAL INDICATING (BOURDON TUBE TYPE)
DEFSTAN 05-10(PT3)/6(2013) : 2013	PRODUCT DEFINITION INFORMATION - PART 3: PRODUCT DEFINITION INFORMATION GUIDANCE