EN 4626-001:2008
Current
The latest, up-to-date edition.
Aerospace series - Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule - Operating temperatures -65 °C to 125 °C (cable dependent) - Flush contacts - Part 001: Technical specification
13-08-2008
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Description
5 Design
6 Drawings
7 Tests
8 Quality assurance
9 Designation and marking
This standard specifies the general characteristics, the conditions for qualification, acceptance and quality assurance, as well as the test programs and groups for fibre sub-assembly contact in rack and panel connectors, intended for use in a temperature range from 65 °C to 125 °C continuous (cable dependent).This standard specifies a pair of adaptors to fit with standard Quadrax cavities and EN 4531-101 optical contact.
Committee |
ASD-STAN
|
DevelopmentNote |
Supersedes PREN 4626-001. (10/2008)
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Current
|
Supersedes |
Standards | Relationship |
UNI EN 4626-001 : 2010 | Identical |
NEN EN 4626-001 : 2008 | Identical |
UNE-EN 4626-001:2008 | Identical |
I.S. EN 4626-001:2008 | Identical |
NF EN 4626-001 : 2008 | Identical |
DIN EN 4626-001:2009-08 | Identical |
SN EN 4626-001 : 2008 | Identical |
PN EN 4626-001 : 2010 | Identical |
BS EN 4626-001:2008 | Identical |
NBN EN 4626-001 : 2008 | Identical |
NS EN 4626-001 : 1ED 2008 | Identical |
BS EN 4626-202:2009 | Aerospace series. Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule. Operating temperatures -65°C to 125°C (cable dependent). Flush contacts Optical contact assembly for 900 μm buffered fibre receptacle. Product standard |
NF EN 4626-202 : 2009 | AEROSPACE SERIES - CONNECTORS, OPTICAL, RECTANGULAR, MULTICONTACT, RACK AND PANEL, QUADRAX CAVITY, 2,5 MM DIAMETER FERRULE - OPERATING TEMPERATURES -65 DEGREES C TO 125 DEGREES C (CABLE DEPENDENT) - FLUSH CONTACTS - PART 202: OPTICAL CONTACT ASSEMBLY FOR 900 [MU]M BUFFERED FIBRE RECEPTACLE - PRODUCT STANDARD |
I.S. EN 4626-202:2009 | AEROSPACE SERIES - CONNECTORS, OPTICAL, RECTANGULAR, MULTICONTACT, RACK AND PANEL, QUADRAX CAVITY, 2,5 MM DIAMETER FERRULE - OPERATING TEMPERATURES -65 DEGREES C TO 125 DEGREES C (CABLE DEPENDENT) - FLUSH CONTACTS - PART 202: OPTICAL CONTACT ASSEMBLY FOR 900 [MU]M BUFFERED FIBRE RECEPTACLE - PRODUCT STANDARD |
EN 4626-202:2009 | Aerospace series - Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule - Operating temperatures - 65 °C to 125 °C (cable dependent) - Flush contacts - Part 202: Optical contact assembly for 900 µm buffered fibre receptacle - Product standard |
EN 2591-311 : 1997 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 311: LOW AIR PRESSURE |
EN 2591-319 : 1997 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 319: GASTIGHTNESS OF SOLDERLESS WRAPPED CONNECTIONS |
EN 2591-6401 : 2001 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 6401: OPTICAL ELEMENTS - ACCELERATION STEADY STATE |
EN 2591-6324 : 2001 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 6324: OPTICAL ELEMENTS - INTERFACIAL SEALING |
EN 2591-6405:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6405: Optical elements - Axial load |
EN 2591-602:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 602: Optical elements - Variation of attenuation and optical discontinuity |
EN 2591-308 : 1998 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 308: SAND AND DUST |
EN 2591-603:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 603: Optical elements - Change of power distribution |
EN 2591-412 : 1999 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 412: CONTACT INSERTION AND EXTRACTION FORCES |
EN 2591-612:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 612: Optical elements - Effectiveness of cable attachment - Cable axial compression |
EN 2591-610:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 610: Optical elements - Effectiveness of cable attachment - Cable pulling |
EN 2591-408 : 1998 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 408: MATING AND UNMATING FORCES |
EN 2591-611:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 611: Optical elements - Effectiveness of cable attachment - Cable torsion |
EN 2591-6317 : 2001 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 6317: OPTICAL ELEMENTS - FLAMMABILITY |
EN 2591-6307 : 2001 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 6307: OPTICAL ELEMENTS - SALT MIST |
EN 2591-101:1994 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 101: Visual examination |
EN 2591-605:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 605: Optical elements - Return loss |
EN 2591-312 : 1997 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 312: AIR LEAKAGE |
EN 2591-102:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part A2: Examination of dimensions and mass |
EN 2591-607:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 607: Optical elements - Immunity to ambient light coupling |
EN 2591-6402:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6402: Optical elements - Shock |
EN 2591-6403:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6403: Optical elements - Vibrations |
EN 2591-614:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 614: Optical elements - Connector radial compression |
EN 2591-6316 : 2001 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 6316: OPTICAL ELEMENTS - OZONE RESISTANCE |
EN 2591-410 : 1998 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 410: INSERT RETENTION IN HOUSING (AXIAL) |
EN 2591-6321:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6321: Optical elements - Damp heat, cyclic test |
EN 2591-320 : 1997 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 320: SIMULATED SOLAR RADIATION AT GROUND LEVEL |
EN 2591-6318 : 2001 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 6318: OPTICAL ELEMENTS - FIRE RESISTANCE |
PREN 4531-101 : 200P3 | AEROSPACE SERIES - CONNECTORS, OPTICAL, CIRCULAR, SINGLE AND MULTIPIN, COUPLED BY TRIPLE START THREADED RING - FLUSH CONTACTS - PART 101: OPTICAL CONTACT FOR EN 4641 MULTIMODE CABLE -55 DEGREES C TO 125 DEGREES C - PRODUCT STANDARD |
EN 2591-6101 : 2001 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 6101: OPTICAL ELEMENTS - VISUAL EXAMINATION |
EN 2591-427 : 2001 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 427: ROBUSTNESS OF PROTECTIVE COVER ATTACHMENT |
PREN 3197 : 200P2 | AEROSPACE SERIES - DESIGN AND INSTALLATION OF AIRCRAFT ELECTRICAL AND OPTICAL INTERCONNECTION SYSTEMS |
EN 2591-6404:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6404: Optical elements - Transverse load |
EN 2591-6314 : 2001 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 6314: OPTICAL ELEMENTS - IMMERSION AT LOW AIR PRESSURE |
EN 2591-409 : 1999 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 409: CONTACT RETENTION IN INSERT |
EN 2591-313 : 1997 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 313: ARTIFICIAL RAIN |
EN 2591-609:2005 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 609: Optical elements - Effectiveness of cable attachment - Cable cyclic flexing |
EN 2591-407 : 1999 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 407: DURABILITY OF CONTACT RETENTION SYSTEM AND SEALS |
EN 2591-6301 : 2001 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 6301: OPTICAL ELEMENTS - ENDURANCE AT TEMPERATURE |
EN 2591-100:2005 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 100: General |
EN 2591-6323:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6323: Optical elements - Thermal shock (Hermetically sealed devices) |
EN 2591-6415:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6415: Optical elements - Test probe damage |
EN 4626-002:2008 | Aerospace series - Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule - Operating temperatures - 65 °C to 125 °C (cable dependent) - Flush contacts - Part 002: Specification of performance and contact arrangements |
EN 2591-604:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 604: Optical elements - Cleaning capability of optical face |
EN 2591-6303 : 2001 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 6303: OPTICAL ELEMENTS - COLD/LOW PRESSURE AND DAMP HEAT |
EN 2591-613:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 613: Optical elements - Impact test |
EN 2591-617:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 617: Optical elements - Temperature cycling |
EN 2591-309 : 1997 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 309: DRY HEAT |
EN 2591-304 : 1997 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 304: DAMP HEAT STEADY STATE |
EN 2591-601:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 601: Optical elements - Insertion loss |
EN 2591-411 : 1998 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 411: INSERT RETENTION IN HOUSING (TORSIONAL) |
EN 2591-615:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 615: Optical elements - Connection integrity at temperature |
EN 2591-302 : 1997 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - CLIMATIC SEQUENCE |
EN 2591-6414:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6414: Optical elements - Unmating of lanyard release optical connection elements |
EN 2591-6306 : 2001 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 6306: OPTICAL ELEMENTS - MOULD GROWTH |
EN 2591-6315 : 2001 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 6315: OPTICAL ELEMENTS - FLUID RESISTANCE |
EN 2591-6406:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6406: Optical elements - Mechanical endurance |
EN 2591-310 : 1998 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 310: COLD |
EN 2591-6305 : 2001 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 6305: OPTICAL ELEMENTS - RAPID CHANGE OF TEMPERATURE |
EN 2591-325:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 325: Ice resistance |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.