We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
  • EN 60793-2-10:2017 (edition 6)

    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
    Add to Watchlist
    This Standard has been added successfully to your Watchlist.
    Please visit My Watchlist to see all standards that you are watching.
    Please log in or to add this standard to your Watchlist.
    We could not add this standard to your Watchlist.
    Please retry or contact support for assistance.
    You need to be logged in to add this standard to your Watchlist.
    Please log in now or create an account to add.
    You already added this Product in the Watchlist.

    Optical fibres - Part 2-10: Product specifications - Sectional specification for category A1 multimode fibres

    Available format(s): 

    Superseded date:  01-02-2022

    Language(s): 

    Published date:  10-11-2017

    Publisher:  European Committee for Standards - Electrical

    Add to Watchlist
    Pure ENs are not available for sale, please purchase a suitable national adoption

    Sorry this product is not available in your region.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    FOREWORD
    1 Scope
    2 Normative references
    3 Terms, definitions
    4 Abbreviated terms
    5 Specifications
    Annex A (normative) - Specifications for sub-category
            A1a multimode fibres
    Annex B (normative) - Specifications for sub-category
            A1b multimode fibres
    Annex C (normative) - Specifications for sub-category
            A1d multimode fibres
    Annex D (normative) - Fibre differential mode delay
            (DMD), calculated effective modal bandwidth
            (EMB[c]) and calculated overfilled modal bandwidth
            (OMB[c]) requirements
    Annex E (informative) System, modal bandwidth,
            and transmitter considerations
    Annex F (informative) - Bandwidth nomenclature
            explanation
    Annex G (informative) - Preliminary indications for
            items needing further study
    Annex H (informative) - Applications and cabling
            categories supported by A1 fibres
    Annex I (informative) - 1-Gigabit, 10-Gigabit,
            25-Gigabit, 40-Gigabit and 100-Gigabit Ethernet
            applications
    Bibliography
    Annex ZA (normative) - Normative references to
             international publications with their
             corresponding European publications

    Abstract - (Show below) - (Hide below)

    IEC 60793-2-10:2017 is applicable to optical fibre sub-categories A1a, A1b, and A1d. These fibres are used or can be incorporated in information transmission equipment and optical fibre cables. Sub-category A1a applies to 50/125 mm graded index fibre. Four bandwidth grades are defined as models A1a.1, A1a.2, A1a.3 and A1a.4. Each of these bandwidth grades is defined for two levels of macrobend loss performance that are distinguished by "a" or "b" suffix. Those models with suffix "a" are specified to meet traditional macrobend loss performance levels. Those models with suffix "b" are specified to meet enhanced macrobend loss (i.e. lower loss) performance levels. Model A1a.4 supports single wavelength or multi-wavelength transmission systems in the vicinity of 850 nm to 950 nm. Sub-category A1b applies to 62,5/125 mm graded index fibre and sub-category A1d applies to 100/140 mm graded index fibre. Other applications include, but are not restricted to, the following:- short reach, high bit-rate systems in telephony, distribution and local networks carrying data, voice and/or video services;- on-premises intra-building and inter-building fibre installations including data centres, local area networks (LANs), storage area networks (SANs), private branch exchanges (PBXs), video, various multiplexing uses, outside telephone cable plant use, and miscellaneous related uses. Three types of requirements apply to these fibres:- general requirements, as defined in IEC 60793-2;- specific requirements common to the category A1 multimode fibres covered in this document and which are given in Clause 5;- particular requirements applicable to individual fibre sub-categories and models, or specific applications, which are defined in the normative specification annexes.This sixth edition cancels and replaces the fifth edition published in 2015. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: addition of model A1a.4 fibre which supports single wavelength or multi-wavelength transmission systems in the vicinity of 850 nm to 950 nm.Keywords: optical fibre sub-categories A1a, A1b, and A1d

    General Product Information - (Show below) - (Hide below)

    Committee CLC/TC 86A
    Development Note Supersedes EN 188200, EN 188201 and EN 188202. (02/2003) Supersedes UNE EN 188200, UNE EN 188201, UNE EN 188202 & UNE EN 187101. (03/2005)
    Document Type Standard
    Publisher European Committee for Standards - Electrical
    Status Superseded
    Superseded By
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    CEI EN 50411-3-6 : 2014 FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-6: MULTIMODE MECHANICAL FIBRE SPLICE FOR USE IN AN OUTDOOR PROTECTED ENVIRONMENT (CAT U)
    BS EN 50516-2-1 : 2011 INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-1: TYPE ODVA PC INDUSTRIAL TERMINATED ON EN 60793-2-10 CATEGORY A1A AND A1B MULTIMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY 1 (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN EN 50173-1 AND IEC 61753-1-3
    I.S. EN 60794-2-11:2012 OPTICAL FIBRE CABLES - PART 2-11: INDOOR OPTICAL FIBRE CABLES - DETAILED SPECIFICATION FOR SIMPLEX AND DUPLEX CABLES FOR USE IN PREMISES CABLING (IEC 60794-2-11:2012 (EQV))
    BS EN 60793-1-52 : 2014 OPTICAL FIBRES - PART 1-52: MEASUREMENT METHODS AND TEST PROCEDURES - CHANGE OF TEMPERATURE TESTS
    05/30128960 DC : 0 EN 50377-4-1 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 4-1: TYPE SC-PC DUPLEX TERMINATED ON IEC 60793-2 CATEGORY A 1 A AND A L B MULTIMODE FIBRE
    BS EN 60793-1-49:2006 Optical fibres Measurement methods and test procedures - Differential mode delay
    BS EN 50516-1-1 : 2011 INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 1-1: TYPE SC-RJ PC INDUSTRIAL TERMINATED ON EN 60793-2-10 CATEGORY A1A AND A1B MULTIMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY I (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN IEC 61753-1-3
    BS EN 60794-2-50 : 2008 OPTICAL FIBRE CABLES - PART 2-50: INDOOR CABLES - FAMILY SPECIFICATION FOR SIMPLEX AND DUPLEX CABLES FOR USE IN TERMINATED CABLE ASSEMBLIES
    BS EN 60794-5-10 : 2014 OPTICAL FIBRE CABLES - PART 5-10: FAMILY SPECIFICATION - OUTDOOR MICRODUCT OPTICAL FIBRE CABLES, MICRODUCTS AND PROTECTED MICRODUCTS FOR INSTALLATION BY BLOWING
    I.S. EN 60794-3-12:2013 OPTICAL FIBRE CABLES - PART 3-12: OUTDOOR CABLES - DETAILED SPECIFICATION FOR DUCT AND DIRECTLY BURIED OPTICAL TELECOMMUNICATION CABLES FOR USE IN PREMISES CABLING (IEC 60794-3-12:2012 (EQV))
    BS EN 62496-3-1 : 2010 OPTICAL CIRCUIT BOARDS - PERFORMANCE STANDARD - PART 3-1: FLEXIBLE OPTICAL CIRCUIT BOARDS USING UNCONNECTORIZED OPTICAL GLASS FIBRES
    BS EN IEC 60793-1-47:2018 OPTICAL FIBRES - PART 1-47: MEASUREMENT METHODS AND TEST PROCEDURES - MACROBENDING LOSS
    CEI EN 61746-2 : 2012 CALIBRATION OF OPTICAL TIME-DOMAIN REFLECTOMETERS (OTDR) - PART 2: OTDR FOR MULTIMODE FIBRES
    CEI EN 50516-1-1 : 2012 INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 1-1: TYPE SC-RJ PC INDUSTRIAL TERMINATED ON EN 60793-2-10 CATEGORY A1A AND A1B MULTIMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY I (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN IEC 61753-1-3
    BS EN 60793-1-53 : 2014 OPTICAL FIBRES - PART 1-53: MEASUREMENT METHODS AND TEST PROCEDURES - WATER IMMERSION TESTS
    BS EN 60794-3-70:2016 (published 2016-05) Optical fibre cables Outdoor cables. Family specification for outdoor optical fibre cables for rapid/multiple deployment
    CEI EN 61300-1 : 2012 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 1: GENERAL AND GUIDANCE
    BS EN 60793-2:2012 (published 2012-04) Optical fibres Product specifications. General
    BS EN 61280-1-4:2010 (published 2010-03) Fibre optic communication subsystem test procedures General communication subsystems. Light source encircled flux measurement method
    CEI EN 60793-1-53 : 2014 OPTICAL FIBRES - PART 1-53: MEASUREMENT METHODS AND TEST PROCEDURES - WATER IMMERSION TESTS
    17/30347868 DC : 0 BS EN 50411-4-1 - FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 4-1: PASSIVE OPTICAL STREET CABINET FOR CATEGORY A
    BS EN 60794-3-21:2016 (published 2016-02) Optical fibre cables Outdoor cables. Product specification for optical self-supporting aerial telecommunication cables for use in premises cabling
    BS EN 60794-2:2017 OPTICAL FIBRE CABLES - PART 2: INDOOR CABLES - SECTIONAL SPECIFICATION (IEC 60794-2:2017)
    UNE-EN 60794-1-20:2014 Optical fibre cables - Part 1-20: Generic specification - Basic optical cable test procedures - General and definitions
    I.S. EN 50173-1:2011 INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 1: GENERAL REQUIREMENTS
    EN 60794-2:2017 OPTICAL FIBRE CABLES - PART 2: INDOOR CABLES - SECTIONAL SPECIFICATION (IEC 60794-2:2017)
    CEI EN 60794-2-31 : 2013 OPTICAL FIBRE CABLES - PART 2-31: INDOOR CABLES - DETAILED SPECIFICATION FOR OPTICAL FIBRE RIBBON CABLES FOR USE IN PREMISES CABLING
    I.S. EN 50411-3-6:2013 FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-6: MULTIMODE MECHANICAL FIBRE SPLICE FOR USE IN AN OUTDOOR PROTECTED ENVIRONMENT (CAT U)
    BS EN 60794-2-51 : 2014 OPTICAL FIBRE CABLES - PART 2-51: INDOOR CABLES - DETAIL SPECIFICATION FOR SIMPLEX AND DUPLEX CABLES FOR USE IN CORDS FOR CONTROLLED ENVIRONMENT
    09/30215019 DC : 0 BS EN 50551-1 - SIMPLEX AND DUPLEX CABLES TO BE USED FOR CORDS - PART 1: BLANK DETAIL SPECIFICATION AND MINIMUM REQUIREMENTS
    UNE-EN 60794-5:2012 Optical fibre cables - Part 5: Sectional specification - Microduct cabling for installation by blowing
    CEI EN 60794-2-50 : 2010 OPTICAL FIBRE CABLES - PART 2-50: INDOOR CABLES - FAMILY SPECIFICATION FOR SIMPLEX AND DUPLEX CABLES FOR USE IN TERMINATED CABLE ASSEMBLIES
    CEI EN 60793-1-51 : 2014 OPTICAL FIBRES - PART 1-51: MEASUREMENT METHODS AND TEST PROCEDURES - DRY HEAT (STEADY STATE) TESTS
    BS EN 62496-2-1 : 2011 OPTICAL CIRCUIT BOARDS - PART 2-1: MEASUREMENTS - OPTICAL ATTENUATION AND ISOLATION
    BS EN 50411-3-1 : 2012 FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-1: FIBRE MANAGEMENT SYSTEM, SPLICE WALL BOX, FOR CATEGORY C & G
    I.S. EN 62614:2010 FIBRE OPTICS - LAUNCH CONDITION REQUIREMENTS FOR MEASURING MULTIMODE ATTENUATION
    15/30272336 DC : 0 BS EN 50411-3-4 - FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-4: FIBRE MANAGEMENT SYSTEM, MODULAR SPLICE AND CONNECTOR WALL BOX, FOR CATEGORY C & A
    BS EN 50411-3-6:2013 Fibre organisers and closures to be used in optical fibre communication systems. Product specifications Multimode mechanical fibre splice for use in an outdoor protected environment (Cat U)
    BS EN 61746-2 : 2011 CALIBRATION OF OPTICAL TIME-DOMAIN REFLECTOMETERS (OTDR) - PART 2: OTDR FOR MULTIMODE FIBRES
    CEI EN 60794-5-20 : 2014 OPTICAL FIBRE CABLES - PART 5-20: FAMILY SPECIFICATION - OUTDOOR MICRODUCT FIBRE UNITS, MICRODUCTS AND PROTECTED MICRODUCTS FOR INSTALLATION BY BLOWING
    CEI EN 60793-1-52 : 2014 OPTICAL FIBRES - PART 1-52: MEASUREMENT METHODS AND TEST PROCEDURES - CHANGE OF TEMPERATURE TESTS
    BS EN 62664-1-1 : 2013 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR PRODUCT SPECIFICATIONS - PART 1-1: LC-PC DUPLEX MULTIMODE CONNECTORS TERMINATED ON IEC 60793-2-10 CATEGORY A1A FIBRE
    BS EN 62614 : 2010 FIBRE OPTICS - LAUNCH CONDITION REQUIREMENTS FOR MEASURING MULTIMODE ATTENUATION
    EN 60794-3-70 : 2016 OPTICAL FIBRE CABLES - PART 3-70: OUTDOOR CABLES - FAMILY SPECIFICATION FOR OUTDOOR OPTICAL FIBRE CABLES FOR RAPID/MULTIPLE DEPLOYMENT (IEC 60794-3-70:2016)
    BS EN 60794-3-12:2013 (published 2013-07) Optical fibre cables Outdoor cables. Detailed specification for duct and directly buried optical telecommunication cables for use in premises cabling
    I.S. EN 60794-2-31:2013 OPTICAL FIBRE CABLES - PART 2-31: INDOOR CABLES - DETAILED SPECIFICATION FOR OPTICAL FIBRE RIBBON CABLES FOR USE IN PREMISES CABLING (IEC 60794-2-31:2012 (EQV))
    I.S. EN 60794-5-10:2014 OPTICAL FIBRE CABLES - PART 5-10: FAMILY SPECIFICATION - OUTDOOR MICRODUCT OPTICAL FIBRE CABLES, MICRODUCTS AND PROTECTED MICRODUCTS FOR INSTALLATION BY BLOWING
    CEI EN 60794-2-22 : 1ED 2017 OPTICAL FIBRE CABLES - PART 2-22: INDOOR CABLES - DETAIL SPECIFICATION FOR MULTI-SIMPLEX BREAKOUT OPTICAL CABLES TO BE TERMINATED WITH CONNECTORS
    CEI EN 50551-1 : 2012 SIMPLEX AND DUPLEX CABLES TO BE USED FOR CORDS - PART 1: BLANK DETAIL SPECIFICATION AND MINIMUM REQUIREMENTS
    BS EN 60794-2-20:2014 (published 2014-06) Optical fibre cables Indoor cables. Family specification for multi-fibre optical cables
    BS EN 60794-1-20:2014 (published 2014-05) Optical fibre cables Generic specification. Basic optical cable test procedures. General and definitions
    UNE-EN 60793-1-43:2015 Optical fibres - Part 1-43: Measurement methods and test procedures - Numerical aperture measurement
    UNE-EN 60793-1-53:2014 Optical fibres - Part 1-53: Measurement methods and test procedures - Water immersion tests
    CEI EN 50083-9 : 2003 CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 9: INTERFACES FOR CATV/SMATV HEADENDS AND SIMILAR PROFESSIONAL EQUIPMENT FOR DVB/MPEG-2 TRANSPORT STREAMS
    CEI EN 62664-1-1 : 2014 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR PRODUCT SPECIFICATIONS - PART 1-1: LC-PC DUPLEX MULTI MODE CONNECTORS TERMINATED ON IEC 60793-2 CATEGORY A1A FIBRE
    I.S. EN 61280-1-4:2010 FIBRE OPTIC COMMUNICATION SUBSYSTEM TEST PROCEDURES - PART 1-4: GENERAL COMMUNICATION SUBSYSTEMS - LIGHT SOURCE ENCIRCLED FLUX MEASUREMENT METHOD
    EN IEC 60793-1-47 : 2018 OPTICAL FIBRES - PART 1-47: MEASUREMENT METHODS AND TEST PROCEDURES - MACROBENDING LOSS (IEC 60793-1-47:2017)
    BS EN 61300-1:2016 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures General and guidance
    BS EN 60793-1-44:2011 Optical fibres Measurement methods and test procedures. Cut-off wavelength
    BS EN 60794-5-20:2014 (published 2014-06) Optical fibre cables Family specification. Outdoor microduct fibre units, microducts and protected microducts for installation by blowing
    CEI EN 60794-2-20 : 2014 OPTICAL FIBRE CABLES - PART 2-20: INDOOR CABLES - FAMILY SPECIFICATION FOR MULTI-FIBRE OPTICAL CABLES
    BS EN 60794-2-30:2008 (published 2009-03) Optical fibre cables Indoor cables. Family specification for ribbon cables
    CEI EN 60794-3-12 : 2014 OPTICAL FIBRE CABLES - PART 3-12: OUTDOOR CABLES - DETAILED SPECIFICATION FOR DUCT AND DIRECTLY BURIED OPTICAL TELECOMMUNICATION CABLES FOR USE IN PREMISES CABLING
    BS EN 61753-022-2 : 2013 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 022-2: FIBRE OPTIC CONNECTORS TERMINATED ON MULTIMODE FIBRE FOR CATEGORY C - CONTROLLED ENVIRONMENT (IEC 61753-022-2:2012)
    BS EN 60793-1-50:2015 OPTICAL FIBRES - PART 1-50: MEASUREMENT METHODS - DAMP HEAT (STEADY STATE) TESTS
    12/30262212 DC : 0 BS EN 50516-3-1 - INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-1: TYPE ODVA APC TERMINATED ON EN 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY 1 (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN EN 50173-1 AND IEC 61753-1-3
    UNE-EN 60793-1-51:2014 Optical fibres - Part 1-51: Measurement methods and test procedures - Dry heat (steady state) tests
    17/30347865 DC : 0 BS EN 50411-3-4 - FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-4: FIBRE MANAGEMENT SYSTEMS, WALL BOX FOR SPLICE TO PATCHCORD CONNECTIONS, FOR CATEGORY C AND A
    07/30163785 DC : 0 BS EN 50377-3-1 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-1: TYPE SG TERMINATED ON IEC 60793-2-10 CATEGORY A1A, A1B OR EQUIVALENT MULTIMODE FIBRE FOR CATEGORY C
    UNE-EN 60794-1-1:2016 Optical fibre cables - Part 1-1: Generic specification - General
    BS EN 60793-1-43:2015 (published 2015-05) Optical fibres Measurement methods and test procedures. Numerical aperture measurement
    BS EN 50582 : 2016 PROCEDURE TO ASSESS THE CIRCUIT INTEGRITY OF OPTICAL FIBRES IN A CABLE UNDER RESISTANCE TO FIRE TESTING
    BS EN 60794-2-10:2011 (published 2011-11) Optical fibre cables Indoor optical fibre cables. Family specification for simplex and duplex cables
    UNE-EN 50582:2016 Procedure to assess the circuit integrity of optical fibres in a cable under resistance to fire testing
    I.S. EN 60793-1-43:2015 OPTICAL FIBRES - PART 1-43: MEASUREMENT METHODS AND TEST PROCEDURES - NUMERICAL APERTURE MEASUREMENT
    BS EN 60793-1-51 : 2014 OPTICAL FIBRES - PART 1-51: MEASUREMENT METHODS AND TEST PROCEDURES - DRY HEAT (STEADY STATE) TESTS
    BS EN 50516-3-1 : 2014 INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-1: TYPE ODVA APC TERMINATED ON EN 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY 1 (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN EN 50173-1 AND IEC 61753-1-3
    UNE-EN 60793-1-52:2014 Optical fibres - Part 1-52: Measurement methods and test procedures - Change of temperature tests
    UNE-EN 60793-1-50:2015 Optical fibres - Part 1-50: Measurement methods - Damp heat (steady state) tests
    BS EN 60793-1-20 : 2014 OPTICAL FIBRES - PART 1-20: MEASUREMENT METHODS AND TEST PROCEDURES - FIBRE GEOMETRY
    BS EN 50083-9:2002 (published 2003-02) Cabled distribution systems for television and sound signals Interfaces for CATV/SMATV headends and similar professional equipment for DVB/MPEG-2 transport streams
    BS EN 60794-2-31:2013 (published 2013-02) Optical fibre cables Indoor cables. Detailed specification for optical fibre ribbon cables for use in premises cabling
    CEI EN 50173-1 : 2011 INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 1: GENERAL REQUIREMENTS
    CEI EN 60794-2-30 : 2010 OPTICAL FIBRE CABLES - PART 2-30: INDOOR CABLES - FAMILY SPECIFICATION FOR RIBBON CABLES
    CEI EN 60793-1-49 : 2007 OPTICAL FIBRES - PART 1-49: MEASUREMENT METHODS AND TEST PROCEDURES - DIFFERENTIAL MODE DELAY
    I.S. EN IEC 60793-1-47:2018 OPTICAL FIBRES - PART 1-47: MEASUREMENT METHODS AND TEST PROCEDURES - MACROBENDING LOSS
    CEI EN 50516-3-1 : 2014 INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-1: TYPE ODVA APC TERMINATED ON EN 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY 1 (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN EN 50173-1 AND IEC 61753-1-3
    CEI EN 60794-2-11 : 2013 OPTICAL FIBRE CABLES - PART 2-11: INDOOR OPTICAL FIBRE CABLES - DETAILED SPECIFICATION FOR SIMPLEX AND DUPLEX CABLES FOR USE IN PREMISES CABLING
    CEI EN 60794-2-21 : 2013 OPTICAL FIBRE CABLES - PART 2-21: INDOOR OPTICAL FIBRE CABLES - DETAILED SPECIFICATION FOR MULTI-FIBRE OPTICAL DISTRIBUTION CABLES FOR USE IN PREMISES CABLING
    I.S. EN 50083-9:2003 CABLES NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 9: INTERFACES FOR CATV/SMATV HEADENDS AND SIMILAR PROFESSIONAL EQUIPMENT FOR DVB/MPEG-2 TRANSPORT STREAMS
    I.S. EN 60793-2:2016 OPTICAL FIBRES - PART 2: PRODUCT SPECIFICATIONS - GENERAL
    I.S. EN 60793-1-50:2015 OPTICAL FIBRES - PART 1-50: MEASUREMENT METHODS - DAMP HEAT (STEADY STATE) TESTS
    I.S. EN 50411-3-1:2012 FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-1: FIBRE MANAGEMENT SYSTEM, SPLICE WALL BOX, FOR CATEGORY C & G
    I.S. EN 50516-2-1:2011 INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-1: TYPE ODVA PC INDUSTRIAL TERMINATED ON EN 60793-2-10 CATEGORY A1A AND A1B MULTIMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY I (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN EN 50173-1 AND IEC 61753-1-3
    I.S. EN 50516-3-1:2014 INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-1: TYPE ODVA APC TERMINATED ON EN 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY 1 (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN EN 50173-1 AND IEC 61753-1-3
    CEI EN 61753-022-2 : 2013 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 022-2: FIBRE OPTIC CONNECTORS TERMINATED ON MULTIMODE FIBRE FOR CATEGORY C - CONTROLLED ENVIRONMENT
    I.S. EN 60793-1-51:2014 OPTICAL FIBRES - PART 1-51: MEASUREMENT METHODS AND TEST PROCEDURES - DRY HEAT (STEADY STATE) TESTS
    CEI EN 50516-2-1 : 2012 INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-1: TYPE ODVA PC INDUSTRIAL TERMINATED ON EN 60793-2-10 CATEGORY A1A AND A1B MULTIMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY 1 (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN EN 50173-1 AND IEC 61753-1-3
    PREN 50411-4-1 : DRAFT 2017 FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 4-1: PASSIVE OPTICAL STREET CABINET FOR CATEGORY A
    I.S. EN 62496-2-1:2011 OPTICAL CIRCUIT BOARDS - PART 2-1: MEASUREMENTS - OPTICAL ATTENUATION AND ISOLATION (IEC 62496-2-1:2011 (EQV))
    BS EN 50173-1:2011 INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 1: GENERAL REQUIREMENTS
    I.S. EN 60794-3-21:2016 OPTICAL FIBRE CABLES - PART 3-21: OUTDOOR CABLES PRODUCT SPECIFICATION FOR OPTICAL SELF-SUPPORTING AERIAL TELECOMMUNICATION CABLES FOR USE IN PREMISES CABLING
    I.S. EN 61753-022-2:2013 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 022-2: FIBRE OPTIC CONNECTORS TERMINATED ON MULTIMODE FIBRE FOR CATEGORY C - CONTROLLED ENVIRONMENT (IEC 61753-022-2:2012 (EQV))
    I.S. EN 60793-1-49:2006 OPTICAL FIBRES - PART 1-49: MEASUREMENT METHODS AND TEST PROCEDURES - DIFFERENTIAL MODE DELAY
    I.S. EN 60794-3-70:2016 OPTICAL FIBRE CABLES - PART 3-70: OUTDOOR CABLES - FAMILY SPECIFICATION FOR OUTDOOR OPTICAL FIBRE CABLES FOR RAPID/MULTIPLE DEPLOYMENT
    I.S. EN 62664-1-1:2013 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR PRODUCT SPECIFICATIONS - PART 1-1: LC-PC DUPLEX MULTIMODE CONNECTORS TERMINATED ON IEC 60793-2-10 CATEGORY A1A FIBRE (IEC 62664-1-1:2013 (EQV))
    CEI EN 50377-3-1 : 2009 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-1: TYPE SG TERMINATED ON IEC 60793-2-10 CATEGORY A1A, A1B OR EQUIVALENT MULTIMODE FIBRE FOR CATEGORY C
    BS EN 60794-2-21:2012 (published 2012-08) Optical fibre cables Indoor optical fibre cables. Detailed specification for multi-fibre optical distribution cables for use in premises cabling
    I.S. EN 60794-2-30:2008 OPTICAL FIBRE CABLES - PART 2-30: INDOOR CABLES - FAMILY SPECIFICATION FOR RIBBON CABLES
    BS EN 60794-1-1:2016 (published 2016-03) Optical fibre cables Generic specification. General
    I.S. EN 60794-2-22:2017 OPTICAL FIBRE CABLES - PART 2-22: INDOOR CABLES - DETAIL SPECIFICATION FOR MULTI-SIMPLEX BREAKOUT OPTICAL CABLES TO BE TERMINATED WITH CONNECTORS
    I.S. EN 60794-2-50:2008 OPTICAL FIBRE CABLES - PART 2-50: INDOOR CABLES - FAMILY SPECIFICATION FOR SIMPLEX AND DUPLEX CABLES FOR USE IN TERMINATED CABLE ASSEMBLIES
    I.S. EN 60794-2-10:2011 OPTICAL FIBRE CABLES - PART 2-10: INDOOR OPTICAL FIBRE CABLES - FAMILY SPECIFICATION FOR SIMPLEX AND DUPLEX CABLES (IEC 60794-2-10:2011 (EQV))
    I.S. EN 60794-5-20:2014 OPTICAL FIBRE CABLES - PART 5-20: FAMILY SPECIFICATION - OUTDOOR MICRODUCT FIBRE UNITS, MICRODUCTS AND PROTECTED MICRODUCTS FOR INSTALLATION BY BLOWING
    I.S. EN 60794-2:2017 OPTICAL FIBRE CABLES - PART 2: INDOOR CABLES - SECTIONAL SPECIFICATION
    BS EN 50377-3-1:2008 Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type SG terminated on IEC 60793-2-10 category A1a, A1b or equivalent multimode fibre for category C
    BS EN 50551-1:2011 (published 2011-07) Simplex and duplex cables to be used for cords Blank detail specification and minimum requirements
    CEI EN 62496-2-1 : 2012 OPTICAL CIRCUIT BOARDS - PART 2-1: MEASUREMENTS - OPTICAL ATTENUATION AND ISOLATION
    CEI EN 60794-5-10 : 2014 OPTICAL FIBRE CABLES - PART 5-10: FAMILY SPECIFICATION - OUTDOOR MICRODUCT OPTICAL FIBRE CABLES, MICRODUCTS AND PROTECTED MICRODUCTS FOR INSTALLATION BY BLOWING
    CEI EN 50411-3-1 : 2013 FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-1: FIBRE MANAGEMENT SYSTEM, SPLICE WALL BOX, FOR CATEGORY C & G
    CEI EN 61280-1-4 : 2011 FIBRE OPTIC COMMUNICATION SUBSYSTEM TEST PROCEDURES - PART 1-4: GENERAL COMMUNICATION SUBSYSTEMS - LIGHT SOURCE ENCIRCLED FLUX MEASUREMENT METHOD
    CEI EN 60794-2-10 : 2012 OPTICAL FIBRE CABLES - PART 2-10: INDOOR OPTICAL FIBRE CABLES - FAMILY SPECIFICATION FOR SIMPLEX AND DUPLEX CABLES
    BS EN 60794-2-11:2012 (published 2012-09) Optical fibre cables Indoor optical fibre cables. Detailed specification for simplex and duplex cables for use in premises cabling
    I.S. EN 60794-1-20:2014 OPTICAL FIBRE CABLES - PART 1-20: GENERIC SPECIFICATION - BASIC OPTICAL CABLE TEST PROCEDURES - GENERAL AND DEFINITIONS
    I.S. EN 60793-1-52:2014 OPTICAL FIBRES - PART 1-52: MEASUREMENT METHODS AND TEST PROCEDURES - CHANGE OF TEMPERATURE TESTS
    I.S. EN 60794-2-51:2014 OPTICAL FIBRE CABLES - PART 2-51: INDOOR CABLES - DETAIL SPECIFICATION FOR SIMPLEX AND DUPLEX CABLES FOR USE IN CORDS FOR CONTROLLED ENVIRONMENT
    NF EN 50551-1 : 2011 SIMPLEX AND DUPLEX CABLES TO BE USED FOR CORDS - PART 1: BLANK DETAIL SPECIFICATION AND MINIMUM REQUIREMENTS
    UNE-EN 61300-1:2017 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 1: General and guidance
    I.S. EN 61300-1:2016 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 1: GENERAL AND GUIDANCE
    I.S. EN 50551-1:2011 SIMPLEX AND DUPLEX CABLES TO BE USED FOR CORDS - PART 1: BLANK DETAIL SPECIFICATION AND MINIMUM REQUIREMENTS
    BS EN 60794-2-22 : 2017 OPTICAL FIBRE CABLES - PART 2-22: INDOOR CABLES - DETAIL SPECIFICATION FOR MULTI-SIMPLEX BREAKOUT OPTICAL CABLES TO BE TERMINATED WITH CONNECTORS
    I.S. EN 60794-2-20:2014 OPTICAL FIBRE CABLES - PART 2-20: INDOOR CABLES - FAMILY SPECIFICATION FOR MULTI-FIBRE OPTICAL CABLES
    I.S. EN 60794-2-21:2012 OPTICAL FIBRE CABLES - PART 2-21: INDOOR OPTICAL FIBRE CABLES - DETAILED SPECIFICATION FOR MULTI-FIBRE OPTICAL DISTRIBUTION CABLES FOR USE IN PREMISES CABLING (IEC 60794-2-21:2012 (EQV))
    EN 50173-1:2011 INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 1: GENERAL REQUIREMENTS
    10/30240333 DC : 0 BS EN 50411-3-6 - FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-6: MULTIMODE MECHANICAL FIBRE SPLICE
    I.S. EN 60793-1-53:2014 OPTICAL FIBRES - PART 1-53: MEASUREMENT METHODS AND TEST PROCEDURES - WATER IMMERSION TESTS
    I.S. EN 50377-3-1:2008 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-1: TYPE SG TERMINATED ON IEC 60793-2-10 CATEGORY A1A, A1B OR EQUIVALENT MULTIMODE FIBRE FOR CATEGORY C
    I.S. EN 60793-1-20:2014 OPTICAL FIBRES - PART 1-20: MEASUREMENT METHODS AND TEST PROCEDURES - FIBRE GEOMETRY
    I.S. EN 61746-2:2011 CALIBRATION OF OPTICAL TIME-DOMAIN REFLECTOMETERS (OTDR) - PART 2: OTDR FOR MULTIMODE FIBRES
    EN 60793-2:2016 OPTICAL FIBRES - PART 2: PRODUCT SPECIFICATIONS - GENERAL (IEC 60793-2:2015)
    EN 61918:2013/AC:2014 INDUSTRIAL COMMUNICATION NETWORKS - INSTALLATION OF COMMUNICATION NETWORKS IN INDUSTRIAL PREMISES (IEC 61918:2013, MODIFIED)
    EN 50516-1-1:2011/AC:2012 INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 1-1: TYPE SC-RJ PC INDUSTRIAL TERMINATED ON EN 60793-2-10 CATEGORY A1A AND A1B MULTIMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY I (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN IEC 61753-1-3
    EN 61746-2:2011/AC:2014 CALIBRATION OF OPTICAL TIME-DOMAIN REFLECTOMETERS (OTDR) - PART 2: OTDR FOR MULTIMODE FIBRES
    OVE/ONORM EN 60794-2-50 : 2009 OPTICAL FIBRE CABLES - PART 2-50: INDOOR CABLES - FAMILY SPECIFICATION FOR SIMPLEX AND DUPLEX CABLES FOR USE IN TERMINATED CABLE ASSEMBLIES
    BS EN 61918:2013 Industrial communication networks. Installation of communication networks in industrial premises
    EN 60794-2-50 : 2008 OPTICAL FIBRE CABLES - PART 2-50: INDOOR CABLES - FAMILY SPECIFICATION FOR SIMPLEX AND DUPLEX CABLES FOR USE IN TERMINATED CABLE ASSEMBLIES
    UNE-EN 60793-1-20:2015 Optical fibres - Part 1-20: Measurement methods and test procedures - Fibre geometry
    I.S. EN 61918:2013 INDUSTRIAL COMMUNICATION NETWORKS - INSTALLATION OF COMMUNICATION NETWORKS IN INDUSTRIAL PREMISES
    EN 60794-3-12:2013 OPTICAL FIBRE CABLES - PART 3-12: OUTDOOR CABLES - DETAILED SPECIFICATION FOR DUCT AND DIRECTLY BURIED OPTICAL TELECOMMUNICATION CABLES FOR USE IN PREMISES CABLING (IEC 60794-3-12:2012)
    EN 60793-1-51:2014 OPTICAL FIBRES - PART 1-51: MEASUREMENT METHODS AND TEST PROCEDURES - DRY HEAT (STEADY STATE) TESTS (IEC 60793-1-51:2014)
    EN 50582 : 2016 PROCEDURE TO ASSESS THE CIRCUIT INTEGRITY OF OPTICAL FIBRES IN A CABLE UNDER RESISTANCE TO FIRE TESTING
    EN 60794-1-1:2016 OPTICAL FIBRE CABLES - PART 1-1: GENERIC SPECIFICATION - GENERAL
    EN 60794-2-20:2014 OPTICAL FIBRE CABLES - PART 2-20: INDOOR CABLES - FAMILY SPECIFICATION FOR MULTI-FIBRE OPTICAL CABLES (IEC 60794-2-20:2013)
    EN 60793-1-43:2015 OPTICAL FIBRES - PART 1-43: MEASUREMENT METHODS AND TEST PROCEDURES - NUMERICAL APERTURE MEASUREMENT (IEC 60793-1-43:2015)
    EN 60793-1-52:2014 OPTICAL FIBRES - PART 1-52: MEASUREMENT METHODS AND TEST PROCEDURES - CHANGE OF TEMPERATURE TESTS
    EN 60794-5-20 : 2014 Optical fibre cables - Part 5-20: Family specification - Outdoor microduct fibre units, microducts and protected microducts for installation by blowing
    EN 60793-1-49:2006 OPTICAL FIBRES - PART 1-49: MEASUREMENT METHODS AND TEST PROCEDURES - DIFFERENTIAL MODE DELAY
    EN 50516-2-1 : 2011 INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-1: TYPE ODVA PC INDUSTRIAL TERMINATED ON EN 60793-2-10 CATEGORY A1A AND A1B MULTIMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY 1 (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN EN 50173-1 AND IEC 61753-1-3
    EN 50083-9:2002 Cable networks for television signals, sound signals and interactive services - Part 9: Interfaces for CATV/SMATV headends and similar professional equipment for DVB/MPEG-2 transport streams
    EN 61280-1-4:2010 FIBRE OPTIC COMMUNICATION SUBSYSTEM TEST PROCEDURES - PART 1-4: GENERAL COMMUNICATION SUBSYSTEMS - LIGHT SOURCE ENCIRCLED FLUX MEASUREMENT METHOD
    EN 50411-3-6 : 2013 FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-6: MULTIMODE MECHANICAL FIBRE SPLICE FOR USE IN AN OUTDOOR PROTECTED ENVIRONMENT (CAT U)
    EN 62496-3-1 : 2010 OPTICAL CIRCUIT BOARDS - PERFORMANCE STANDARD - PART 3-1: FLEXIBLE OPTICAL CIRCUIT BOARDS USING UNCONNECTORIZED OPTICAL GLASS FIBRES
    EN 61753-022-2:2013 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 022-2: FIBRE OPTIC CONNECTORS TERMINATED ON MULTIMODE FIBRE FOR CATEGORY C - CONTROLLED ENVIRONMENT (IEC 61753-022-2:2012)
    EN 60794-2-30:2008 OPTICAL FIBRE CABLES - PART 2-30: INDOOR CABLES - FAMILY SPECIFICATION FOR RIBBON CABLES
    EN 60794-2-10:2011 OPTICAL FIBRE CABLES - PART 2-10: INDOOR OPTICAL FIBRE CABLES - FAMILY SPECIFICATION FOR SIMPLEX AND DUPLEX CABLES (IEC 60794-2-10:2011)
    EN 60794-2-22 : 2017 OPTICAL FIBRE CABLES - PART 2-22: INDOOR CABLES - DETAIL SPECIFICATION FOR MULTI-SIMPLEX BREAKOUT OPTICAL CABLES TO BE TERMINATED WITH CONNECTORS (IEC 60794-2-22:2016)
    EN 60794-2-31:2013 Optical fibre cables - Part 2-31: Indoor cables - Detailed specification for optical fibre ribbon cables for use in premises cabling
    EN 60794-2-21:2012 OPTICAL FIBRE CABLES - PART 2-21: INDOOR OPTICAL FIBRE CABLES - DETAILED SPECIFICATION FOR MULTI-FIBRE OPTICAL DISTRIBUTION CABLES FOR USE IN PREMISES CABLING (IEC 60794-2-21:2012)
    EN 60794-1-20:2014 OPTICAL FIBRE CABLES - PART 1-20: GENERIC SPECIFICATION - BASIC OPTICAL CABLE TEST PROCEDURES - GENERAL AND DEFINITIONS (IEC 60794-1-20:2014)
    EN 60794-3-21:2016 OPTICAL FIBRE CABLES - PART 3-21: OUTDOOR CABLES - PRODUCT SPECIFICATION FOR OPTICAL SELF-SUPPORTING AERIAL TELECOMMUNICATION CABLES FOR USE IN PREMISES CABLING (IEC 60794-3-21:2015)
    EN 61300-1:2016 (edition 4) Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 1: General and guidance
    EN 50551-1 : 2011 SIMPLEX AND DUPLEX CABLES TO BE USED FOR CORDS - PART 1: BLANK DETAIL SPECIFICATION AND MINIMUM REQUIREMENTS
    EN 62496-2-1 : 2011 OPTICAL CIRCUIT BOARDS - PART 2-1: MEASUREMENTS - OPTICAL ATTENUATION AND ISOLATION (IEC 62496-2-1:2011)
    EN 60794-2-11:2012 Optical fibre cables - Part 2-11: Indoor optical fibre cables - Detailed specification for simplex and duplex cables for use in premises cabling
    EN 60793-1-20:2014/AC:2016-03 OPTICAL FIBRES - PART 1-20: MEASUREMENT METHODS AND TEST PROCEDURES - FIBRE GEOMETRY (IEC 60793-1-20:2014/COR1:2016)
    EN 62664-1-1 : 2013 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR PRODUCT SPECIFICATIONS - PART 1-1: LC-PC DUPLEX MULTIMODE CONNECTORS TERMINATED ON IEC 60793-2-10 CATEGORY A1A FIBRE (IEC 62664-1-1:2013)
    EN 60793-1-53:2014 OPTICAL FIBRES - PART 1-53: MEASUREMENT METHODS AND TEST PROCEDURES - WATER IMMERSION TESTS (IEC 60793-1-53:2014)
    EN 60794-5-10 : 2014 OPTICAL FIBRE CABLES - PART 5-10: FAMILY SPECIFICATION - OUTDOOR MICRODUCT OPTICAL FIBRE CABLES, MICRODUCTS AND PROTECTED MICRODUCTS FOR INSTALLATION BY BLOWING (IEC 60794-5-10:2014)
    EN 60793-1-44:2011 OPTICAL FIBRES - PART 1-44: MEASUREMENT METHODS AND TEST PROCEDURES - CUT-OFF WAVELENGTH
    EN 50377-3-1:2008 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 3-1: Type SG terminated on IEC 60793-2-10 category A1a, A1b or equivalent multimode fibre for category C
    EN 50516-3-1 : 2014 INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-1: TYPE ODVA APC TERMINATED ON EN 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY 1 (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN EN 50173-1 AND IEC 61753-1-3
    EN 62614 : 2010 FIBRE OPTICS - LAUNCH CONDITION REQUIREMENTS FOR MEASURING MULTIMODE ATTENUATION
    EN 60794-2-51 : 2014 OPTICAL FIBRE CABLES - PART 2-51: INDOOR CABLES - DETAIL SPECIFICATION FOR SIMPLEX AND DUPLEX CABLES FOR USE IN CORDS FOR CONTROLLED ENVIRONMENT (IEC 60794-2-51:2014)
    EN 60793-1-50:2015 OPTICAL FIBRES - PART 1-50: MEASUREMENT METHODS - DAMP HEAT (STEADY STATE) TESTS (IEC 60793-1-50:2014)
    EN 50411-3-1:2012 Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 3-1: Fibre management system, splice wall box, for category C & G

    Standards Referencing This Book - (Show below) - (Hide below)

    EN 60793-1-32:2010 OPTICAL FIBRES - PART 1-32: MEASUREMENT METHODS AND TEST PROCEDURES - COATING STRIPPABILITY
    EN 60793-1-46 : 2002 OPTICAL FIBRES - PART 1-46: MEASUREMENT METHODS AND TEST PROCEDURES - MONITORING OF CHANGES IN OPTICAL TRANSMITTANCE
    ISO/IEC 14165-116:2005 Information technology Fibre Channel Part 116: 10 Gigabit (10GFC)
    IEC 61280-1-3:2010 Fibre optic communication subsystem test procedures - Part 1-3: General communication subsystems - Central wavelength and spectral width measurement
    EN 60793-1-21 : 2002 OPTICAL FIBRES - PART 1-21: MEASUREMENT METHODS AND TEST PROCEDURES - COATING GEOMETRY
    EN 60793-1-20:2014/AC:2016-03 OPTICAL FIBRES - PART 1-20: MEASUREMENT METHODS AND TEST PROCEDURES - FIBRE GEOMETRY (IEC 60793-1-20:2014/COR1:2016)
    EN 60793-1-30:2011 OPTICAL FIBRES - PART 1-30: MEASUREMENT METHODS AND TEST PROCEDURES - FIBRE PROOF TEST
    IEC 60793-1-41:2010 Optical fibres - Part 1-41: Measurement methods and test procedures - Bandwidth
    IEC 60793-1-43:2015 Optical fibres - Part 1-43: Measurement methods and test procedures - Numerical aperture measurement
    ISO/IEC 14165-115:2006 Information technology Fibre Channel Part 115: Physical Interfaces (FC-PI)
    IEC 60793-1-52:2014 OPTICAL FIBRES - PART 1-52: MEASUREMENT METHODS AND TEST PROCEDURES - CHANGE OF TEMPERATURE TESTS
    IEEE 802 : 2014 LOCAL AND METROPOLITAN AREA NETWORKS: OVERVIEW AND ARCHITECTURE
    IEC 60793-2:2015 Optical fibres - Part 2: Product specifications - General
    IEEE 802.3 : 2012 ETHERNET - CORRIGENDUM 1: MULTI-LANE TIMESTAMPING
    IEC 60793-1-50:2014 Optical fibres - Part 1-50: Measurement methods and test procedures - Damp heat (steady state) tests
    ISO/IEC 11801:2002 Information technology Generic cabling for customer premises
    IEC 60793-1-42:2013 Optical fibres - Part 1-42: Measurement methods and test procedures - Chromatic dispersion
    IEC 60793-1-49:2006 Optical fibres - Part 1-49: Measurement methods and test procedures - Differential mode delay
    IEC 60794-1-1:2015 Optical fibre cables - Part 1-1: Generic specification - General
    EN 60793-1-40:2003 Optical fibres - Part 1-40: Measurement methods and test procedures - Attenuation
    IEC 60793-1-33:2017 Optical fibres - Part 1-33: Measurement methods and test procedures - Stress corrosion susceptibility
    IEC 60793-1-32:2010 OPTICAL FIBRES - PART 1-32: MEASUREMENT METHODS AND TEST PROCEDURES - COATING STRIPPABILITY
    IEC 60793-1-51:2014 OPTICAL FIBRES - PART 1-51: MEASUREMENT METHODS AND TEST PROCEDURES - DRY HEAT (STEADY STATE) TESTS
    EN 60793-1-22:2002 Optical fibres - Part 1-22: Measurement methods and test procedures - Length measurement
    EN 60793-1-50:2015 OPTICAL FIBRES - PART 1-50: MEASUREMENT METHODS - DAMP HEAT (STEADY STATE) TESTS (IEC 60793-1-50:2014)
    EN 60793-1-49:2006 OPTICAL FIBRES - PART 1-49: MEASUREMENT METHODS AND TEST PROCEDURES - DIFFERENTIAL MODE DELAY
    IEC 60793-1-46:2001 Optical fibres - Part 1-46: Measurement methods and test procedures - Monitoring of changes in optical transmittance
    IEC 60793-1-40:2001 Optical fibres - Part 1-40: Measurement methods and test procedures - Attenuation
    IEC 61280-4-1:2009 Fibre-optic communication subsystem test procedures - Part 4-1: Installed cable plant - Multimode attenuation measurement
    EN 60793-1-31:2010 OPTICAL FIBRES - PART 1-31: MEASUREMENT METHODS AND TEST PROCEDURES - TENSILE STRENGTH
    IEC TR 62048:2014 Optical fibres - Reliability - Power law theory
    ANSI INCITS 512 : 2015 INFORMATION TECHNOLOGY - FIBRE CHANNEL - PHYSICAL INTERFACE-6 (FC-PI-6)
    EN 60793-1-43:2015 OPTICAL FIBRES - PART 1-43: MEASUREMENT METHODS AND TEST PROCEDURES - NUMERICAL APERTURE MEASUREMENT (IEC 60793-1-43:2015)
    IEC 60793-1-21:2001 Optical fibres - Part 1-21: Measurement methods and test procedures - Coating geometry
    EN 60793-1-52:2014 OPTICAL FIBRES - PART 1-52: MEASUREMENT METHODS AND TEST PROCEDURES - CHANGE OF TEMPERATURE TESTS
    IEC 60793-1-47 : 4.0 OPTICAL FIBRES - PART 1-47: MEASUREMENT METHODS AND TEST PROCEDURES - MACROBENDING LOSS
    EN 60793-1-51:2014 OPTICAL FIBRES - PART 1-51: MEASUREMENT METHODS AND TEST PROCEDURES - DRY HEAT (STEADY STATE) TESTS (IEC 60793-1-51:2014)
    EN 60793-2:2016 OPTICAL FIBRES - PART 2: PRODUCT SPECIFICATIONS - GENERAL (IEC 60793-2:2015)
    TIA TSB 172 : A2013 HIGH DATA RATE MULTIMODE FIBER TRANSMISSION TECHNIQUES
    EN 60793-1-41:2010 Optical fibres - Part 1-41: Measurement methods and test procedures - Bandwidth
    ANSI INCITS 479 : 2011 INFORMATION TECHNOLOGY - FIBRE CHANNEL - PHYSICAL INTERFACE - 5 (FC-PI-5)
    IEC 60793-1-20:2014 Optical fibres - Part 1-20: Measurement methods and test procedures - Fibre geometry
    EN 60793-1-42:2013/AC:2013 OPTICAL FIBRES - PART 1-42: MEASUREMENT METHODS AND TEST PROCEDURES - CHROMATIC DISPERSION
    IEC 60793-1-53:2014 OPTICAL FIBRES - PART 1-53: MEASUREMENT METHODS AND TEST PROCEDURES - WATER IMMERSION TESTS
    EN 60793-1-34:2006 OPTICAL FIBRES - PART 1-34: MEASUREMENT METHODS AND TEST PROCEDURES - FIBRE CURL
    EN 61280-4-1:2009 FIBRE OPTIC COMMUNICATION SUBSYSTEM TEST PROCEDURES - PART 4-1: INSTALLED CABLE PLANT - MULTIMODE ATTENUATION MEASUREMENT
    IEC 60793-1-34:2006 Optical fibres - Part 1-34: Measurement methods and test procedures - Fibre curl
    ISO/IEC/IEEE 8802-3:2017 Information technology Telecommunications and information exchange between systems Local and metropolitan area networks Specific requirements Part 3: Standard for Ethernet
    IEC 60793-1-22:2001 Optical fibres - Part 1-22: Measurement methods and test procedures - Length measurement
    IEC 60793-1-31:2010 OPTICAL FIBRES - PART 1-31: MEASUREMENT METHODS AND TEST PROCEDURES - TENSILE STRENGTH
    IEC 60793-1-30:2010 Optical fibres - Part 1-30: Measurement methods and test procedures - Fibre proof test
    EN 60793-1-53:2014 OPTICAL FIBRES - PART 1-53: MEASUREMENT METHODS AND TEST PROCEDURES - WATER IMMERSION TESTS (IEC 60793-1-53:2014)
    IEC 61280-1-4:2009 Fibre optic communication subsystem test procedures - Part 1-4: General communication subsystems - Light source encircled flux measurement method
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective