IEC 60695-11-20:2015
|
Fire hazard testing - Part 11-20: Test flames - 500 W flame test method
|
ISO 4589-3:2017
|
Plastics — Determination of burning behaviour by oxygen index — Part 3: Elevated-temperature test
|
ISO 5660-1:2015
|
Reaction-to-fire tests Heat release, smoke production and mass loss rate Part 1: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement)
|
ISO/TS 5660-3:2012
|
Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 3: Guidance on measurement
|
ISO 5658-2:2006
|
Reaction to fire tests Spread of flame Part 2: Lateral spread on building and transport products in vertical configuration
|
ISO 13784-2:2002
|
Reaction-to-fire tests for sandwich panel building systems Part 2: Test method for large rooms
|
ISO 10093:1998
|
Plastics Fire tests Standard ignition sources
|
ISO 9705:1993
|
Fire tests Full-scale room test for surface products
|
DIN 54341:1988-01
|
TESTING OF SEATS IN RAILWAYS FOR PUBLIC TRAFFIC; DETERMINATION OF BURNING BEHAVIOUR WITH A PAPER PILLOW IGNITION SOURCE
|
ISO 5659-2:2017
|
Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test
|
ISO 9773:1998
|
Plastics — Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source
|
ISO 12992:2017
|
Plastics — Vertical flame spread determination for film and sheet
|
VDE 0472-804 : 1989
|
TESTING OF CABLES, WIRES & FLEXIBLE CORDS - BURNING BEHAVIOUR
|
NFX 70 100 : 1986
|
ESSAIS DE COMPORTEMENT AU FEU - ANALYSE DE GAZ PROVENANT DE LA DEGRADATION THERMIQUE - PARTIE 1: METHODE D'ANALYSES DES EFFLUENTS GAZEUX
|
ISO 13943:2017
|
Fire safety — Vocabulary
|
ISO 5658-4:2001
|
Reaction to fire tests — Spread of flame — Part 4: Intermediate-scale test of vertical spread of flame with vertically oriented specimen
|
DIN 4102-1:1998-05
|
FIRE BEHAVIOUR OF BUILDING MATERIALS AND BUILDING COMPONENTS - PART 1: BUILDING MATERIALS; CONCEPTS, REQUIREMENTS AND TESTS
|
ISO 24473:2008
|
Fire tests — Open calorimetry — Measurement of the rate of production of heat and combustion products for fires of up to 40 MW
|
ISO/TR 3814:1989
|
Tests for measuring "reaction-to-fire" of building materials — Their development and application
|
EN 13823:2010+A1:2014
|
REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - BUILDING PRODUCTS EXCLUDING FLOORINGS EXPOSED TO THE THERMAL ATTACK BY A SINGLE BURNING ITEM
|
BS 476-20:1987
|
Fire tests on building materials and structures Method for determination of the fire resistance of elements of construction (general principles)
|
ISO 19702:2015
|
Guidance for sampling and analysis of toxic gases and vapours in fire effluents using Fourier Transform Infrared (FTIR) spectroscopy
|
ISO/TR 11696-1:1999
|
Uses of reaction to fire test results Part 1: Application of test results to predict fire performance of internal linings and other building products
|
ISO 9772:2012
|
Cellular plastics Determination of horizontal burning characteristics of small specimens subjected to a small flame
|
ISO 14696:2009
|
Reaction-to-fire tests Determination of fire and thermal parameters of materials, products and assemblies using an intermediate-scale calorimeter (ICAL)
|
IEC 60695-11-10:2013
|
Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods
|
ISO/TR 13387-2:1999
|
Fire safety engineering Part 2: Design fire scenarios and design fires
|
ISO 80000-1:2009
|
Quantities and units — Part 1: General
|
ISO 20632:2008
|
Reaction-to-fire tests — Small room test for pipe insulation products or systems
|
ISO 4589-2:2017
|
Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test
|
DIN 54837:2007-12
|
TESTING OF MATERIALS, SMALL COMPONENTS AND COMPONENT SECTIONS FOR RAIL VEHICLES - DETERMINATION OF BURNING BEHAVIOUR USING A GAS BURNER
|
ISO 13784-1:2014
|
Reaction to fire test for sandwich panel building systems — Part 1: Small room test
|
ISO 9239-1:2010
|
Reaction to fire tests for floorings Part 1: Determination of the burning behaviour using a radiant heat source
|
ISO/TR 11696-2:1999
|
Uses of reaction to fire test results Part 2: Fire hazard assessment of construction products
|
ISO 21367:2007
|
Plastics — Reaction to fire — Test method for flame spread and combustion product release from vertically oriented specimens
|
IEC 61034-2:2005+AMD1:2013 CSV
|
Measurement of smoke density of cables burning under definedconditions - Part 2: Test procedure and requirements
|
DIN 4102-7:1998-07
|
FIRE BEHAVIOUR OF BUILDING MATERIALS AND BUILDING COMPONENTS - PART 7: ROOFING; DEFINITIONS, REQUIREMENTS AND TESTING
|
ISO/TR 11925-1:1999
|
Reaction to fire tests Ignitability of building products subjected to direct impingement of flame Part 1: Guidance on ignitability
|
ISO 14697:2007
|
Reaction-to-fire tests — Guidance on the choice of substrates for building and transport products
|