UNE-EN ISO 17292:2016
Current
The latest, up-to-date edition.
Metal ball valves for petroleum, petrochemical and allied industries (ISO 17292:2015)
Hardcopy , PDF
Spanish, Castilian, English
08-11-2016
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Pressure/temperature ratings
4.1 Valve rating
4.2 Shell rating
4.3 Seat and seal rating
5 Design
5.1 Flow passageway
5.2 Body
6 Materials
6.1 Shell
6.2 Shell material repair
6.3 Trim
6.4 Identification plate
6.5 Bolting
6.6 Seals
6.7 Threaded plugs
6.8 Low temperature service
7 Marking
7.1 Legibility
7.2 Body marking
7.3 Ring joint marking
7.4 Identification plate
7.5 Special marking for unidirectional valves
8 Testing and inspection
8.1 Pressure tests
8.2 Inspection
8.3 Examination
8.4 Supplementary examination
9 Preparation for despatch
Annex A (informative) Information to be specified by
the purchaser
Annex B (informative) Identification of valve parts
Bibliography
Provides the requirements for a series of metal ball valves suitable for petroleum, petrochemical, natural gas plants, and related industrial applications.
Committee |
CTN 19
|
DocumentType |
Standard
|
Pages |
36
|
PublisherName |
Asociacion Espanola de Normalizacion
|
Status |
Current
|
Supersedes |
Standards | Relationship |
ISO 17292:2015 | Identical |
NBN EN ISO 17292 : 2016 | Identical |
NEN EN ISO 17292 : 2015 | Identical |
NS EN ISO 17292 : 2004 | Identical |
I.S. EN ISO 17292:2015 | Identical |
SN EN ISO 17292:2016 | Identical |
UNI EN ISO 17292 : 2004 | Identical |
BS EN ISO 17292:2015 | Identical |
EN ISO 17292:2015 | Identical |
DIN EN ISO 17292:2016-05 | Identical |
NF EN ISO 17292 : 2016 | Identical |
EN 12982:2009 | Industrial valves - End-to-end and centre-to-end dimensions for butt welding end valves |
EN 10269:2013 | Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
ASME PV CODE 9 : 2017 | BOILER AND PRESSURE VESSEL CODE - WELDING, BRAZING, AND FUSING QUALIFICATIONS - QUALIFICATION STANDARD FOR WELDING, BRAZING, AND FUSING PROCEDURES; WELDERS; BRAZERS; AND WELDING, BRAZING, AND FUSING OPERATORS |
ISO 15614-2:2005 | Specification and qualification of welding procedures for metallic materials Welding procedure test Part 2: Arc welding of aluminium and its alloys |
ISO 15761:2002 | Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries |
ISO 15610:2003 | Specification and qualification of welding procedures for metallic materials — Qualification based on tested welding consumables |
ISO 4034:2012 | Hexagon regular nuts (style 1) Product grade C |
ISO 14313:2007 | Petroleum and natural gas industries — Pipeline transportation systems — Pipeline valves |
ASME B16.10 : 2017 | FACE-TO-FACE AND END-TO-END DIMENSIONS OF VALVES |
ASME B16.11 : 2016 | FORGED FITTINGS, SOCKET-WELDING AND THREADED |
ISO 965-2:1998 | ISO general purpose metric screw threads — Tolerances — Part 2: Limits of sizes for general purpose external and internal screw threads — Medium quality |
ISO 9606-1:2012 | Qualification testing of welders — Fusion welding — Part 1: Steels |
EN 12516-1:2014 | Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells |
ISO 5209:1977 | General purpose industrial valves Marking |
ISO 7-2:2000 | Pipe threads where pressure-tight joints are made on the threads Part 2: Verification by means of limit gauges |
ISO 6708:1995 | Pipework components Definition and selection of DN (nominal size) |
ISO 4032:2012 | Hexagon regular nuts (style 1) — Product grades A and B |
ASME B16.20 : 2012 | METALLIC GASKETS FOR PIPE FLANGES |
ISO 10434:2004 | Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries |
ISO 15614-1:2017 | Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys |
ISO 15156-2:2015 | Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons |
ASME B1.20.1 : 2013(R2018) | PIPE THREADS, GENERAL PURPOSE (INCH) |
ISO 15156-3:2015 | Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys |
ISO 15609-1:2004 | Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 1: Arc welding |
ISO 7-1:1994 | Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation |
API 608 : 2012 | METAL BALL VALVES - FLANGED, THREADED, AND WELDING ENDS |
ISO 5752:1982 | Metal valves for use in flanged pipe systems Face-to-face and centre-to-face dimensions |
ISO 4200:1991 | Plain end steel tubes, welded and seamless — General tables of dimensions and masses per unit length |
ASME B36.10M : 2015 | WELDED AND SEAMLESS WROUGHT STEEL PIPE |
ISO 7121:2016 | Steel ball valves for general-purpose industrial applications |
EN 1333:2006 | Flanges and their joints - Pipework components - Definition and selection of PN |
ISO 15156-1:2015 | Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 1: General principles for selection of cracking-resistant materials |
ASME B16.5 : 2017 | PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD |
ASME B16.34 : 2017 | VALVES - FLANGED, THREADED, AND WELDING END |
ISO 4033:2012 | Hexagon high nuts (style 2) — Product grades A and B |
ISO 261:1998 | ISO general purpose metric screw threads General plan |
MSS SP 55 : 2011 | QUALITY STANDARD FOR STEEL CASTINGS FOR VALVES, FLANGES, FITTINGS, AND OTHER PIPING COMPONENTS - VISUAL METHOD FOR EVALUATION OF SURFACE IRREGULARITIES |
ISO 10497:2010 | Testing of valves — Fire type-testing requirements |
ASME B18.2.2 : 2015 | NUTS FOR GENERAL APPLICATIONS: MACHINE SCREW NUTS, HEX, SQUARE, HEX FLANGE, AND COUPLING NUTS (INCH SERIES) |
ISO 15607:2003 | Specification and qualification of welding procedures for metallic materials General rules |
ASME B16.25 : 2012 | BUTTWELDING ENDS |
ISO 5211:2017 | Industrial valves — Part-turn actuator attachments |
ISO 5208:2015 | Industrial valves Pressure testing of metallic valves |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.