• There are no items in your cart

AS/NZS 4065:2010

Withdrawn
Withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

Concrete utility services poles
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Withdrawn date

06-25-2021

Language(s)

English

Published date

06-29-2010

Preview

1 - AS/NZS 4065:2010 CONCRETE UTILITY SERVICES POLES
4 - PREFACE
5 - CONTENTS
6 - SECTION 1 SCOPE AND GENERAL
6 - 1.1 SCOPE
6 - 1.2 APPLICATION
6 - 1.3 REFERENCED DOCUMENTS
6 - 1.4 DEFINITIONS
6 - 1.4.1 Along-line direction
6 - 1.4.2 Deflection
6 - 1.4.3 Failure
6 - 1.4.4 Load at the serviceability limit state
7 - 1.4.5 Load at the strength limit state
7 - 1.4.6 Straightness
7 - 1.4.7 Test load
7 - 1.4.8 Transverse direction
7 - 1.5 CLASSIFICATION
7 - 1.6 MARKING
7 - 1.6.1 General
7 - 1.6.2 Form of marking
8 - 1.7 PHYSICAL CHARACTERISTICS
8 - 1.7.1 General
8 - 1.7.2 Dimensions and ultimate loads
8 - 1.7.3 Structural test for poles
9 - SECTION 2 GENERAL REQUIREMENTS
9 - 2.1 MATERIALS
9 - 2.1.1 General
9 - 2.1.2 Concrete
9 - 2.1.3 Reinforcement
9 - 2.1.4 Tendons and anchorages
9 - 2.1.5 Other components
9 - 2.2 DESIGN FOR STRENGTH AND SERVICEABILITY
9 - 2.3 MANUFACTURE
9 - 2.3.1 Formwork
9 - 2.3.2 Reinforcement and tendon placement
9 - 2.3.3 Casting
10 - 2.3.4 Protection and curing
10 - 2.3.5 Stressing of tendons and protection of tendons and anchorages
10 - 2.3.6 Surface finish
10 - 2.3.7 Tolerances
11 - SECTION 3 PARTICULAR REQUIREMENTS
11 - 3.1 GENERAL
11 - 3.1.1 Compliance
11 - 3.1.2 Access barrier
11 - 3.1.3 Step bolt anchors
11 - 3.1.4 Provision of holes and ferrules
11 - 3.1.5 Galvanizing
12 - 3.1.6 Electrical requirements
12 - 3.1.7 Jointed poles
12 - 3.1.8 Handling and storage requirements
12 - 3.2 STREET LIGHTING POLES
12 - 3.2.1 Pole components
12 - 3.2.2 Electrical provisions
13 - 3.3 FLOODLIGHTING AND COMMUNICATION POLES
13 - 3.3.1 Pole components
13 - 3.3.2 Electrical provisions
13 - 3.3.3 Access for inspection or maintenance
14 - 3.4 AERIAL CONDUCTOR POLES
14 - 3.4.1 Pole components
14 - 3.4.2 Electrical earthing
14 - 3.4.3 Access for inspection and maintenance
14 - 3.5 TRAFFIC SIGNAL POLES
15 - APPENDIX A - MEANS OF DEMONSTRATING COMPLIANCE WITH THIS STANDARD
15 - A1 SCOPE
15 - A2 STATISTICAL SAMPLING
15 - A3 PRODUCT CERTIFICATION
16 - A4 SUPPLIER'S QUALITY MANAGEMENT SYSTEM
16 - A5 OTHER MEANS OF ASSESSMENT
17 - APPENDIX B - REFERENCED DOCUMENTS
19 - APPENDIX C - INFORMATION TO BE SUPPLIED BY PURCHASER

Specifies minimum requirements for the materials, design, fabrication and erection of concrete utility services poles. It is intended to be used in conjunction with the forthcoming issue of AS4676, Structural design requirements for utility services poles.

This Standard specifies the minimum requirements for materials, design and manufacture of reinforced and prestressed concrete utility services poles.The Standard applies to concrete poles and their component parts which support any one of street lights, floodlights, aerial conductors, electromotive-transport conductors, traffic signals, communication equipment, or similar utility services, or any combination of these services.The Standard does not apply to concrete flag poles (see Note 2).NOTES:1 Methods for demonstrating compliance with this Standard are given in Appendix A.2 Information on the additional loads induced by the temporary attachment of flags or banners to utility services poles is given in Appendix G of AS/NZS 4676.

Committee
CE-019
DocumentType
Standard
ISBN
978 0 7337 9618 0
Pages
14
PublisherName
Standards Australia
Status
Withdrawn
Supersedes

First published in Australia as AS 4065-1992.First published in New Zealand as NZS 1054:1966.Revised and redesignated as NZS 3115:1966.AS 4065-1992 and NZS 3115:1980 jointly revised and amalgamated as AS/NZS 4065:2000.Second edition 2010. Originated in Australia as AS 4065-1992. Originated in New Zealand as NZS 1054:1966. Revised and redesignated as NZS 3115:1980. AS 4065-1992 and NZS 3115:1980 jointly revised and amalgamated as AS/NZS 4065:2000. Second edition 2010.

AS 1314-1972 Prestressing anchorages (metric units)
AS 3610 Supp1-1995 Formwork for concrete - Blowhole and colour evaluation charts (Supplement to
AS 2979-1998 Traffic signal mast arms
AS 1379-2007 Specification and supply of concrete (Reconfirmed 2017)
AS 3610-1995 Formwork for concrete
AS 3610 SUPP 2-1996 Formwork for concrete - Commentary (Supplement to AS 3610-1995)
AS 1311-1987 Steel tendons for prestressed concrete-7-wire stress-relieved steel strand for tendons in prestressed concrete
AS 1310-1987 Steel wire for tendons in prestressed concrete
AS/NZS 4680:2006 Hot-dip galvanized (zinc) coatings on fabricated ferrous articles (Reconfirmed 2017)
AS 1798-1992 Lighting poles and bracket arms - Preferred dimensions
AS 1657-1992 Fixed platforms, walkways, stairways and ladders - Design, construction and installation
AS/NZS 1891.3:1997 Industrial fall-arrest systems and devices - Fall-arrest devices
AS 1199.0-2003 Sampling procedures for inspection by attributes Introduction to the ISO 2859 attribute sampling system (Reconfirmed 2016)
AS/NZS 1170.2:2002 Structural design actions Wind actions
AS 2837-1986 Wrought alloy steels - Stainless steel bars and semi-finished products
AS 3610.1-2010 Formwork for concrete Documentation and surface finish
AS/NZS 4676:2000 Structural design requirements for utility services poles
AS/NZS 4671:2001 Steel reinforcing materials
AS/NZS ISO 9001:2008 Quality management systems - Requirements
AS 1199.1-2003 Sampling procedures for inspection by attributes Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (Reconfirmed 2016)
AS 1313-1989 Steel tendons for prestressed concrete - Cold-worked high-tensile alloy steel bars for prestressed concrete
HB 18.28-2005 Conformity assessment - Guidance on a third-party certification system for products
AS/NZS 1158.1.1:2005 Lighting for roads and public spaces Vehicular traffic (Category V) lighting - Performance and design requirements
AS 2339-1997 Traffic signal posts and attachments
AS 3600 SUPP 1-1994 Concrete structures - Commentary (Supplement to AS 3600-1994)
AS 3600-2009 Concrete structures

AS/NZS 7000:2016 Overhead line design
HB 331-2012 Overhead line design
AS/NZS 7000:2010 Overhead line design - Detailed procedures

View more information
US$48.74
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.