BS 7S 80:2002
|
High chromium-nickel corrosion resisting steel forging stock, bars, forgings and parts (880 to 1080 MPa: limiting ruling section 100 mm)
|
BS A 273:1978
|
Specification for gauging practice for 100° countersunk head fasteners for flushness control
|
TR 4070 : 1
|
AEROSPACE SERIES - MOLYBDENUM DISULPHIDE COATINGS - LIST OF COMMERCIAL PRODUCTS
|
BS EN 3911:2010
|
Aerospace series. Six lobe recess. Geometrical definition
|
NAS1800:2004
|
RECESS, SIX LOBE DRIVE, INTERNAL, DIMENSIONS FOR RECESS AND GAGES
|
SAE AMS 2417 : 2013
|
PLATING, ZINC-NICKEL ALLOY
|
BS S 154:1976
|
Specification. 2½% nickel-chromium-molybdenum steel billets, bars, forgings and parts (880-1080 MPa: limiting ruling section 150 mm)
|
BS EN ISO 898-1:2013
|
Mechanical properties of fasteners made of carbon steel and alloy steel Bolts, screws and studs with specified property classes. Coarse thread and fine pitch thread
|
SAE AMS 03-25 : 2015
|
SULFURIC ACID ANODIZING OF ALUMINUM AND ALUMINUM ALLOYS
|
BS S148(1969) : 1969
|
SPECIFICATION FOR LOW NICKEL-CHROMIUM STEEL (BAR FOR THE MANUFACTURE OF FORGED BOLTS ONLY)
|
BS 2S 142:1977
|
Specification for 1% chromium-molybdenum steel billets, bars, forgings and parts (900-1100 MPa: limiting ruling section 40 mm)
|
BS S130(1964) : LATEST
|
|
BS EN 4826:2014
|
Aerospace series. Zinc-Nickel (12 %-16 % Ni) plating of steels with specified tensile strength ≤ 1 450 MPa, copper alloys, nickel alloys and aluminium alloys for parts and fasteners
|
BS L 102:1971
|
Specification for bars and extruded sections of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (not exceeding 200 mm diameter or minor sectional dimension) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
|
TR 3775 : 4
|
AEROSPACE SERIES - BOLTS AND PINS - MATERIALS
|
BS 2A204,2A206,2A208,A217-A225(1963) : 1963 PD 6167
|
SPECIFICATIONS FOR MACHINE SCREWS AND NUTS (UNIFIED THREADS) BELOW 1/4 INCH FOR AERONAUTICAL PURPOSES
|
BS EN 2133:2010
|
Aerospace series. Cadmium plating of steels with specified tensile strength ≤ 1450 MPa, copper, copper alloys and nickel alloys
|
SAE AMS 03-19 : 2015
|
ELECTRO-DEPOSITION OF CADMIUM
|
BS EN 2516:1997
|
Passivation of corrosion resisting steels and decontamination of nickel base alloys
|
BS EN 2398:2008
|
Aerospace series. Heat resisting steel FE-PA2601(X6NiCrTiMoV26-15). Rm ≥ 900 MPa. Bars for machined bolts. D ≤ 25 mm
|
BS EN 12166:2011
|
Copper and copper alloys. Wire for general purposes
|
BS EN 755-2:2016
|
Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles Mechanical properties
|
BS 4A 100:2003
|
Specification for general requirements for bolts and free running nuts of tensile strength not exceeding 1249 MPa
|
BS L 168:1978
|
Specification for bars and extruded sections of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and artificially aged) (not exceeding 200 mm diameter or minor sectional dimension) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
|
BS EN ISO 10664:2014
|
Hexalobular internal driving feature for bolts and screws
|
BS S 158:1977
|
Specification for 1% chromium-molybdenum steel bars for the manufacture of forged bolts and forged nuts
|
BS EN 2284:1991
|
Specification for sulfuric acid anodizing of aluminium and wrought aluminium alloys
|
BS 2S 147:1976
|
Specification for 0.5% nickel-chromium-molybdenum steel bars for the manufacture of forged bolts and forged nuts
|
BS EN 12163:2011
|
Copper and copper alloys. Rod for general purposes
|
BS EN 12164:2011
|
Copper and copper alloys. Rod for free machining purposes
|
NAS9800:2014
|
HEAD PROTRUSION GAGING, 100 DEGREES FLUSH HEAD FASTENERS, GAGE BLOCK, GAGE DIAMETERS AND STYLUS
|