• There are no items in your cart

ASTM D 5092/D5092M : 2016

Current
Current

The latest, up-to-date edition.

Standard Practice for Design and Installation of Groundwater Monitoring Wells
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

11-15-2016

1.1This practice describes a methodology for designing and installing conventional (screened and filter-packed) groundwater monitoring wells suitable for formations ranging from unconsolidated aquifers (that is, sands and gravels) to granular materials having grain-size distributions with up to 50 % passing a #200 sieve and as much as 20 % clay-sized material (that is, silty fine sands with some clay). Formations finer than this (that is, silts, clays, silty clays, clayey silts) can be monitored but the well may not yield sufficient water required for sampling, and fine filter pack and screen requirements are difficult and costly to install. Use of coarser filter/screens in fine formations will result in wells with unstable filter packs and associated elevated sample turbidity that may adversely affect sample accuracy and data quality objectives. This practice is not applicable in fractured or karst rock conditions, but may be applicable for other porous rock formations.

1.2The recommended monitoring well design and installation procedures presented in this practice are based on the assumption that the objectives of the program are to obtain representative groundwater samples and other representative groundwater data from a targeted zone of interest in the subsurface defined by site characterization.

1.3This practice when used on coarse grained sand and gravel aquifers, in combination with proper well development (D5521), proper groundwater sampling procedures (D4448), and proper well maintenance and rehabilitation (D5978), will permit acquisition of groundwater samples free of artifactual turbidity, eliminate siltation of wells between sampling events, and permit acquisition of accurate groundwater levels and hydraulic conductivity test data from the zone screened by the well. For wells installed in fine-grained formation materials, it is generally necessary to use much finer pre-packed well screens (6.3.3.2) and/or employ sampling methods that minimize screen intake flow velocity, and disturbance of the well column including suspension of settled solids in the well. Using low-flow purging and sampling techniques (D6771) or passive sampling devices (D7929) are two means to minimize the potential sample bias associated with turbidity.

1.4This practice applies primarily to well design and installation methods used in drilled boreholes. Other standards, including Guide D6724 and Practice D6725, cover installation of monitoring wells using direct-push methods.

1.5Units—The values stated in either inch-pound units or SI units [presented in brackets] are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. Equivalent values given in parentheses are shown for mix designs and sieves sizes.

1.5.1Sieve Designations (Specification E11) are identified using the “alternate” system, for example, #40, #200 sieve etc. with nominal opening size in inches and particle sizes in mm. See Specification E11 for standard metric sieve sizes.

1.5.2Well screen slots are expressed in inches and the metric equivalent is given in the terminology section and when necessary in the standard (see 3.3.6).

1.6All observed and calculated values shall conform to the guidelines for significant digits and rounding established in Practice D6026, unless superseded by this standard.

1.7This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

1.8This practice offers a set of instructions for performing one or more specific operations. This document cannot replace education or experience and should be used in conjunction with professional judgment. Nat all aspects of this practice may be applicable in all circumstances. This ASTM standard is not intended to represent or replace the standard of care by which the adequacy of a given professional service must be judged, nor should this document be applied without consideration of a project's many unique aspects. The word “Standard” in the title of this document means only that the document has been approved through the ASTM consensus process.

Committee
D 18
DocumentType
Standard Practice
Pages
25
PublisherName
American Society for Testing and Materials
Status
Current
Supersedes

ASTM D 5434 : 1997 Standard Guide for Field Logging of Subsurface Explorations of Soil and Rock
ASTM D 6430 : 1999 : R2010 Standard Guide for Using the Gravity Method for Subsurface Investigation
ASTM E 11 : 2020 Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves
ASTM D 6639 : 2001 Standard Guide for Using the Frequency Domain Electromagnetic Method for Subsurface Investigations
ASTM D 5783 : 1995 : R2000 Standard Guide for Use of Direct Rotary Drilling with Water-Based Drilling Fluid for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
ASTM D 5784 : 1995 : R2000 Standard Guide for Use of Hollow-Stem Augers for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
ASTM D 2487 : 2017 : EDT 1 Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System)
ASTM D 6167 : 2011 Standard Guide for Conducting Borehole Geophysical Logging: Mechanical Caliper
ASTM D 3550 : 1984 : R1995 : EDT 1 Standard Practice for Thick Wall, Ring-Lined, Split Barrel, Drive Sampling of Soils
ASTM D 6519 : 2002 Standard Practice for Sampling of Soil Using the Hydraulically Operated Stationary Piston Sampler
ASTM D 6725 : 2004 : R2010 Standard Practice for Direct Push Installation of Prepacked Screen Monitoring Wells in Unconsolidated Aquifers
ASTM D 6431 : 2018 Standard Guide for Using the Direct Current Resistivity Method for Subsurface Site Characterization
ASTM D 1452 : 2009 Standard Practice for Soil Exploration and Sampling by Auger Borings
ASTM D 1586 : 2008 : REV A Standard Test Method for Standard Penetration Test (SPT) and Split-Barrel Sampling of Soils
ASTM D 4448 : 2001 : R2019 Standard Guide for Sampling Ground-Water Monitoring Wells
ASTM D 5782 : 1995 : R2000 Standard Guide for Use of Direct Air-Rotary Drilling for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
ASTM D 653 : 2007 Standard Terminology Relating to Soil, Rock, and Contained Fluids
ASTM D 1129 : 2003 Standard Terminology Relating to Water
ASTM D 3740 : 2012 Standard Practice for Minimum Requirements for Agencies Engaged in Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction
ASTM D 1586 : 1999 Standard Test Method for Penetration Test and Split-Barrel Sampling of Soils
ASTM D 5778 : 1995 : R2000 Standard Test Method for Performing Electronic Friction Cone and Piezocone Penetration Testing of Soils
ASTM D 5876 : 1995 : R2005 Standard Guide for Use of Direct Rotary Wireline Casing Advancement Drilling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices
ASTM D 1586 : 2008 Standard Test Method for Standard Penetration Test (SPT) and Split-Barrel Sampling of Soils
ASTM D 5782 : 1995 : R2006 Standard Guide for Use of Direct Air-Rotary Drilling for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
ASTM D 422 : 1963 : R2007 : EDT 1 Standard Test Method for Particle-Size Analysis of Soils
ASTM D 6282 : 1998 Standard Guide for Direct Push Soil Sampling for Environmental Site Characterizations
ASTM D 3740 : 2023 Standard Practice for Minimum Requirements for Agencies Engaged in Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction
ASTM D 1129 : 2013 Standard Terminology Relating to Water
ASTM D 1129 : 2013 : R2020 Standard Terminology Relating to Water
ASTM D 3740 : 2019 Standard Practice for Minimum Requirements for Agencies Engaged in Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction
ASTM D 3740 : 2004 : REV A : EDT 1 Standard Practice for Minimum Requirements for Agencies Engaged in the Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction
ASTM D 6274 : 1998 Standard Guide for Conducting Borehole Geophysical Logging-Gamma
ASTM D 4448 : 1985 : REV A : R1992 Standard Guide for Sampling Ground-Water Monitoring Wells
ASTM D 6001 : 1996 : EDT 1 Standard Guide for Direct-Push Water Sampling for Geoenvironmental Investigations
ASTM D 6067 : 1996 : EDT 1 Standard Guide for Using the Electronic Cone Penetrometer for Environmental Site Characterization
ASTM D 2488 : 1969 : R1975 Recommended Practice for Description Of Soils (Visual-Manual Procedure)
ASTM D 5088 : 2002 Standard Practice for Decontamination of Field Equipment Used at Nonradioactive Waste Sites
ASTM D 5778 : 2007 Standard Test Method for Electronic Friction Cone and Piezocone Penetration Testing of Soils
ASTM D 3740 : 2008 Standard Practice for Minimum Requirements for Agencies Engaged in Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction
ASTM D 4448 : 2001 : R2013 Standard Guide for Sampling Ground-Water Monitoring Wells
ASTM D 1129 : 2013 : R2020 : EDT 2 Standard Terminology Relating to Water
ASTM D 2113 : 2014 Standard Practice for Rock Core Drilling and Sampling of Rock for Site Exploration (Withdrawn 2023)
ASTM D 6724 : 2004 Standard Guide for Installation of Direct Push Ground Water Monitoring Wells
ASTM D 6026 : 2013 Standard Practice for Using Significant Digits in Geotechnical Data
ASTM D 5783 : 1995 : R2006 Standard Guide for Use of Direct Rotary Drilling with Water-Based Drilling Fluid for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
ASTM D 6285 : 1999 : R2016 Standard Guide for Locating Abandoned Wells
ASTM D 1452 : 2007 : REV A Standard Practice for Soil Investigation and Sampling by Auger Borings
ASTM D 1587 : 2008 : R2012 : EDT 1 Standard Practice for Thin-Walled Tube Sampling of Soils for Geotechnical Purposes
ASTM D 6429 : 1999 : R2011 : EDT 1 Standard Guide for Selecting Surface Geophysical Methods (Withdrawn 2020)
ASTM D 4448 : 2001 : R2007 Standard Guide for Sampling Ground-Water Monitoring Wells
ASTM D 1129 : 2006 Standard Terminology Relating to Water
ASTM D 5876 : 1995 : R2012 : EDT 1 Standard Guide for Use of Direct Rotary Wireline Casing Advancement Drilling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices
ASTM D 6026 : 2006 Standard Practice for Using Significant Digits in Geotechnical Data
ASTM D 5787 : 2020 Standard Practice for Monitoring Well Protection At or Near Land Surface
ASTM D 5434 : 2012 Standard Guide for Field Logging of Subsurface Explorations of Soil and Rock (Withdrawn 2021)
ASTM D 5787 : 2014 Standard Practice for Monitoring Well Protection
ASTM D 5781 : 1995 : R2000 Standard Guide for Use of Dual-Wall Reverse-Circulation Drilling for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
ASTM D 6640 : 2021 Standard Practice for Collection and Handling of Soils Obtained in Core Barrel Samplers for Environmental Investigations
ASTM D 6001 : 1996 : R2002 Standard Guide for Direct-Push Water Sampling for Geoenvironmental Investigations
ASTM D 2488 : 2017 Standard Practice for Description and Identification of Soils (Visual-Manual Procedures)
ASTM D 6914 : 2004 Standard Practice for Sonic Drilling for Site Characterization and the Installation of Subsurface Monitoring Devices
ASTM D 6169 : 1998 Standard Guide for Selection of Soil and Rock Sampling Devices Used With Drill Rigs for Environmental Investigations
ASTM D 6914 : 2004 : EDT 1 Standard Practice for Sonic Drilling for Site Characterization and the Installation of Subsurface Monitoring Devices
ASTM D 6432 : 2019 Standard Guide for Using the Surface Ground Penetrating Radar Method for Subsurface Investigation
ASTM D 6429 : 1999 Standard Guide for Selecting Surface Geophysical Methods
ASTM D 3282 : 1993 : R1997 : EDT 1 Standard Classification of Soils and Soil-Aggregate Mixtures for Highway Construction Purposes
ASTM D 3740 : 1999 : REV C Standard Practice for Minimum Requirements for Agencies Engaged in the Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction
ASTM D 5088 : 2015 : REV A Standard Practice for Decontamination of Field Equipment Used at Waste Sites
ASTM D 3282 : 1993 : R2004 : EDT 1 Standard Practice for Classification of Soils and Soil-Aggregate Mixtures for Highway Construction Purposes
ASTM D 1586 : 2011 Standard Test Method for Standard Penetration Test (SPT) and Split-Barrel Sampling of Soils
ASTM D 5777 : 2018 Standard Guide for Using the Seismic Refraction Method for Subsurface Investigation
ASTM D 5783 : 1995 : R2012 Standard Guide for Use of Direct Rotary Drilling with Water-Based Drilling Fluid for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
ASTM D 6429 : 2020 Standard Guide for Selecting Surface Geophysical Methods
ASTM D 5787 : 1995 : R2000 Standard Practice for Monitoring Well Protection
ASTM D 1129 : 2013 : R2020 : EDT 1 Standard Terminology Relating to Water
ASTM D 6724 : 2004 : R2010 Standard Guide for Installation of Direct Push Groundwater Monitoring Wells
ASTM D 1129 : 1999 : REV A Standard Terminology Relating to Water
ASTM D 6167 : 1997 : R2004 Standard Guide for Conducting Borehole Geophysical Logging: Mechanical Caliper
ASTM E 11 : 2022 Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves
ASTM D 5777 : 2000 : R2011 : EDT 1 Standard Guide for Using the Seismic Refraction Method for Subsurface Investigation
ASTM D 5521 : 2005 Standard Guide for Development of Groundwater Monitoring Wells in Granular Aquifers
ASTM D 6285 : 1999 : R2005 Standard Guide for Locating Abandoned Wells
ASTM D 1129 : 2006 : REV A Standard Terminology Relating to Water
ASTM D 5753 : 2005 Standard Guide for Planning and Conducting Borehole Geophysical Logging
ASTM D 5777 : 2000 : R2006 Standard Guide for Using the Seismic Refraction Method for Subsurface Investigation
ASTM D 5608 : 1994 Standard Practice for Decontamination of Field Equipment Used at Low Level Radioactive Waste Sites
ASTM D 6432 : 1999 Standard Guide for Using the Surface Ground Penetrating Radar Method for Subsurface Investigation
ASTM D 6771 : 2002 Standard Practice for Low-Flow Purging and Sampling for Wells and Devices Used for Ground-Water Quality Investigations (Withdrawn 2011)
ASTM D 5784 : 1995 : R2006 Standard Guide for Use of Hollow-Stem Augers for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
ASTM D 653 : 2022 Standard Terminology Relating to Soil, Rock, and Contained Fluids
ASTM D 1129 : 2003 : REV A Standard Terminology Relating to Water
ASTM D 1129 : 2002 Standard Terminology Relating to Water
ASTM D 5778 : 2012 Standard Test Method for Electronic Friction Cone and Piezocone Penetration Testing of Soils
ASTM D 6639 : 2001 : R2008 Standard Guide for Using the Frequency Domain Electromagnetic Method for Subsurface Investigations (Withdrawn 2017)
ASTM D 1587 : 2008 Standard Practice for Thin-Walled Tube Sampling of Soils for Geotechnical Purposes
ASTM D 5782 : 2018 Standard Guide for Use of Direct Air-Rotary Drilling for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
ASTM D 5088 : 2020 Standard Practice for Decontamination of Field Equipment Used at Waste Sites
ASTM D 6429 : 1999 : R2006 Standard Guide for Selecting Surface Geophysical Methods
ASTM D 653 : 2020 : EDT 1 Standard Terminology Relating to Soil, Rock, and Contained Fluids
ASTM D 5088 : 1990 Standard Practice for Decontamination of Field Equipment Used at Nonradioactive Waste Sites
ASTM D 7242 : 2006 Standard Practice for Field Pneumatic Slug (Instantaneous Change in Head) Tests to Determine Hydraulic Properties of Aquifers with Direct Push Groundwater Samplers
ASTM D 5299 : 1999 : R2005 Standard Guide for Decommissioning of Groundwater Wells, Vadose Zone Monitoring Devices, Boreholes, and Other Devices for Environmental Activities
ASTM D 6026 : 1999 Standard Practice for Using Significant Digits in Geotechnical Data
ASTM D 6430 : 2018 Standard Guide for Using the Gravity Method for Subsurface Site Characterization
ASTM D 3740 : 2011 Standard Practice for Minimum Requirements for Agencies Engaged in Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction
ASTM D 6640 : 2001 : R2015 Standard Practice for Collection and Handling of Soils Obtained in Core Barrel Samplers for Environmental Investigations
ASTM D 6274 : 2018 Standard Guide for Conducting Borehole Geophysical Logging - Gamma
ASTM D 5876 : 1995 : R2000 Standard Guide for Use of Direct Rotary Wireline Casing Advancement Drilling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices
ASTM D 6771 : 2018 Standard Practice for Low-Flow Purging and Sampling for Wells and Devices Used for Ground-Water Quality Investigations
ASTM D 6519 : 2015 Standard Practice for Sampling of Soil Using the Hydraulically Operated Stationary Piston Sampler
ASTM D 2488 : 2009 Standard Practice for Description and Identification of Soils (Visual-Manual Procedure)
ASTM D 6725 : 2004 Standard Practice for Direct Push Installation of Prepacked Screen Monitoring Wells in Unconsolidated Aquifers
ASTM D 6026 : 2001 : EDT 1 Standard Practice for Using Significant Digits in Geotechnical Data
ASTM D 6914 : 2004 : R2010 Standard Practice for Sonic Drilling for Site Characterization and the Installation of Subsurface Monitoring Devices
ASTM D 3740 : 2010 Standard Practice for Minimum Requirements for Agencies Engaged in Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction
ASTM D 653 : 2021 : REV A Standard Terminology Relating to Soil, Rock, and Contained Fluids
ASTM D 5875 : 1995 : R2006 Standard Guide for Use of Cable-Tool Drilling and Sampling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices
ASTM D 6274 : 2010 Standard Guide for Conducting Borehole Geophysical Logging - Gamma
ASTM D 5787 : 1995 : R2009 Standard Practice for Monitoring Well Protection
ASTM D 6519 : 2008 Standard Practice for Sampling of Soil Using the Hydraulically Operated Stationary Piston Sampler
ASTM D 5434 : 2003 Standard Guide for Field Logging of Subsurface Explorations of Soil and Rock
ASTM D 5872 : 1995 : R2000 Standard Guide for Use of Casing Advancement Drilling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices
ASTM D 3282 : 2015 Standard Practice for Classification of Soils and Soil-Aggregate Mixtures for Highway Construction Purposes
ASTM D 3550 : 2001 : R2007 Standard Practice for Thick Wall, Ring-Lined, Split Barrel, Drive Sampling of Soils (Withdrawn 2016)
ASTM D 6639 : 2018 Standard Guide for Using the Frequency Domain Electromagnetic Method for Subsurface Site Characterizations
ASTM D 6026 : 1996 Standard Practice for Using Significant Digits in Geotechnical Data
ASTM D 3740 : 2004 : REV A Standard Practice for Minimum Requirements for Agencies Engaged in the Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction
ASTM F 480 : 2014 : R2022 Standard Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80
ASTM D 1129 : 2004 Standard Terminology Relating to Water
ASTM D 5608 : 2016 Standard Practices for Decontamination of Sampling and Non Sample Contacting Equipment Used at Low Level Radioactive Waste Sites
ASTM D 6067 : 1996 : R2003 Standard Guide for Using the Electronic Cone Penetrometer for Environmental Site Characterization
ASTM D 5978 : 1996 : EDT 1 Standard Guide for Maintenance and Rehabilitation of Ground-Water Monitoring Wells
ASTM D 3740 : 2001 Standard Practice for Minimum Requirements for Agencies Engaged in the Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction
ASTM D 2488 : 2000 Standard Practice for Description and Identification of Soils (Visual-Manual Procedure)
ASTM D 5518 : 1994 : EDT 1 Standard Guide for Acquisition of File Aerial Photography and Imagery for Establishing Historic Site-Use and Surficial Conditions (Withdrawn 2003)
ASTM D 2113 : 2006 Standard Practice for Rock Core Drilling and Sampling of Rock for Site Investigation
ASTM D 6432 : 2011 Standard Guide for Using the Surface Ground Penetrating Radar Method for Subsurface Investigation
ASTM D 6285 : 1999 : R2012 : EDT 1 Standard Guide for Locating Abandoned Wells
ASTM D 6724 : 2001 Standard Guide for Installation of Direct Push Ground Water Monitoring Wells
ASTM D 6286 : 1998 Standard Guide for Selection of Drilling Methods for Environmental Site Characterization
ASTM D 2113 : 2008 Standard Practice for Rock Core Drilling and Sampling of Rock for Site Investigation
ASTM D 2487 : 2006 : EDT 1 Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System)
ASTM D 653 : 2021 Standard Terminology Relating to Soil, Rock, and Contained Fluids
ASTM D 6431 : 1999 : R2005 Standard Guide for Using the Direct Current Resistivity Method for Subsurface Investigation
ASTM D 6431 : 1999 : R2010 Standard Guide for Using the Direct Current Resistivity Method for Subsurface Investigation
ASTM D 653 : 2021 : REV B Standard Terminology Relating to Soil, Rock, and Contained Fluids
ASTM D 2113 : 1999 Standard Practice for Rock Core Drilling and Sampling of Rock for Site Investigation
ASTM D 5608 : 2010 Standard Practices for Decontamination of Field Equipment Used at Low Level Radioactive Waste Sites
ASTM D 6167 : 1997 : EDT 1 Standard Guide for Conducting Borehole Geophysical Logging: Mechanical Caliper
ASTM D 6286 : 2012 Standard Guide for Selection of Drilling Methods for Environmental Site Characterization
ASTM D 1452 : 2007 Standard Practice for Soil Investigation and Sampling by Auger Borings
ASTM D 1129 : 2002 : REV A Standard Terminology Relating to Water
ASTM D 6640 : 2001 : R2005 Standard Practice for Collection and Handling of Soils Obtained in Core Barrel Samplers for Environmental Investigations
ASTM D 5753 : 2005 : R2010 Standard Guide for Planning and Conducting Borehole Geophysical Logging
ASTM D 6026 : 1996 : EDT 1 Standard Practice for Using Significant Digits in Geotechnical Data
ASTM D 5777 : 2000 Standard Guide for Using the Seismic Refraction Method for Subsurface Investigation
ASTM D 6430 : 1999 Standard Guide for Using the Gravity Method for Subsurface Investigation
ASTM D 5299 : 1999 : R2012 : EDT 1 Standard Guide for Decommissioning of Groundwater Wells, Vadose Zone Monitoring Devices, Boreholes, and Other Devices for Environmental Activities
ASTM D 6430 : 1999 : R2005 Standard Guide for Using the Gravity Method for Subsurface Investigation
ASTM D 5783 : 2018 Standard Guide for Use of Direct Rotary Drilling with Water-Based Drilling Fluid for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
ASTM D 3740 : 2012 : REV A Standard Practice for Minimum Requirements for Agencies Engaged in Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction
ASTM D 6519 : 2005 Standard Practice for Sampling of Soil Using the Hydraulically Operated Stationary Piston Sampler
ASTM D 6519 : 2000 Standard Practice for Sampling of Soil Using the Hydraulically Operated Stationary Piston Sampler
ASTM D 5782 : 1995 : R2012 Standard Guide for Use of Direct Air-Rotary Drilling for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
ASTM D 5521 : 1994 : EDT 1 Standard Guide for Development of Ground-Water Monitoring Wells in Granular Aquifers (Withdrawn 2003)
ASTM D 6429 : 2023 Standard Guide for Selecting Surface Geophysical Methods
ASTM D 3740 : 2003 Standard Practice for Minimum Requirements for Agencies Engaged in the Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction
ASTM D 6725 : 2001 Standard Practice for Direct Push Installation of Prepacked Screen Monitoring Wells in Unconsolidated Aquifers
ASTM D 5299 : 1999 Standard Guide for Decommissioning of Ground Water Wells, Vadose Zone Monitoring Devices, Boreholes, and Other Devices for Environmental Activities
ASTM D 5088 : 2015 Standard Practice for Decontamination of Field Equipment Used at Waste Sites
ASTM D 5608 : 2001 Standard Practice for Decontamination of Field Equipment Used at Low Level Radioactive Waste Sites
ASTM D 5088 : 2002 : R2008 Standard Practice for Decontamination of Field Equipment Used at Waste Sites
ASTM D 2487 : 2010 Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System)
ASTM D 5608 : 2001 : R2006 Standard Practices for Decontamination of Field Equipment Used at Low Level Radioactive Waste Sites
ASTM D 6286 : 2019 Standard Guide for Selection of Drilling and Direct Push Methods for Geotechnical and Environmental Subsurface Site Characterization
ASTM D 2487 : 2000 Standard Classification of Soils for Engineering Purposes (Unified Soil Classification System)
ASTM D 4448 : 2001 Standard Guide for Sampling Ground-Water Monitoring Wells
ASTM D 5434 : 2009 Standard Guide for Field Logging of Subsurface Explorations of Soil and Rock
ASTM D 6001 : 2005 : R2012 Standard Guide for Direct-Push Groundwater Sampling for Environmental Site Characterization
ASTM D 5753 : 2018 Standard Guide for Planning and Conducting Geotechnical Borehole Geophysical Logging
ASTM F 480 : 2014 Standard Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80
ASTM D 2487 : 2006 Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System)
ASTM D 6640 : 2001 Standard Practice for Collection and Handling of Soils Obtained in Core Barrel Samplers for Environmental Investigations
ASTM D 6026 : 2021 Standard Practice for Using Significant Digits and Data Records in Geotechnical Data
ASTM D 1129 : 2010 Standard Terminology Relating to Water
ASTM D 6431 : 1999 Standard Guide for Using the Direct Current Resistivity Method for Subsurface Investigation
ASTM D 6026 : 2001 Standard Practice for Using Significant Digits in Geotechnical Data
ASTM D 6001 : 2005 Standard Guide for Direct-Push Groundwater Sampling for Environmental Site Characterization
ASTM D 2487 : 2011 Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System)
ASTM D 5781 : 1995 : R2006 Standard Guide for Use of Dual-Wall Reverse-Circulation Drilling for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
ASTM D 7929 : 2014 Standard Guide for Selection of Passive Techniques for Sampling Groundwater Monitoring Wells
ASTM D 1129 : 2006 : REV A : EDT 1 Standard Terminology Relating to Water
ASTM D 1129 : 2001 Standard Terminology Relating to Water
ASTM D 6167 : 2019 Standard Guide for Conducting Borehole Geophysical Logging: Mechanical Caliper
ASTM D 1129 : 2004 : EDT 1 Standard Terminology Relating to Water
ASTM C 150 : 2002 : REV A : EDT 1 Standard Specification for Portland Cement
ASTM D 6771 : 2021 Standard Practice for Low-Flow Purging and Sampling Used for Groundwater Monitoring
ASTM D 1587 : 2000 Standard Practice for Thin-Walled Tube Sampling of Soils for Geotechnical Purposes
ASTM D 6640 : 2001 : R2010 Standard Practice for Collection and Handling of Soils Obtained in Core Barrel Samplers for Environmental Investigations
ASTM D 5978 : 1996 : R2005 Standard Guide for Maintenance and Rehabilitation of Groundwater Monitoring Wells
ASTM D 5978 : 1996 : R2011 : EDT 1 Standard Guide for Maintenance and Rehabilitation of Groundwater Monitoring Wells
ASTM D 5872 : 1995 : R2006 Standard Guide for Use of Casing Advancement Drilling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices
ASTM D 7929 : 2020 Standard Guide for Selection of Passive Techniques for Sampling Groundwater Monitoring Wells
ASTM D 2487 : 2017 Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System)
ASTM D 6067 : 2010 Standard Practice for Using the Electronic Piezocone Penetrometer Tests for Environmental Site Characterization
ASTM D 2488 : 2009 : REV A Standard Practice for Description and Identification of Soils (Visual-Manual Procedure)
ASTM D 2488 : 2017 : EDT 1 Standard Practice for Description and Identification of Soils (Visual-Manual Procedures)
ASTM D 2488 : 2006 Standard Practice for Description and Identification of Soils (Visual-Manual Procedure)
ASTM D 5753 : 1995 : EDT 1 Standard Guide for Planning and Conducting Borehole Geophysical Logging (Withdrawn 2005)
ASTM D 3740 : 2004 Standard Practice for Minimum Requirements for Agencies Engaged in the Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction
ASTM D 2487 : 1969 : R1975 Standard Test Method for Classification Of Soils For Engineering Purposes
ASTM D 3282 : 2009 Standard Practice for Classification of Soils and Soil-Aggregate Mixtures for Highway Construction Purposes
ASTM D 3550 : 2001 Standard Practice for Thick Wall, Ring-Lined, Split Barrel, Drive Sampling of Soils
ASTM D 1452 : 1980 : R2000 Standard Practice for Soil Investigation and Sampling by Auger Borings
ASTM D 6285 : 1999 Standard Guide for Locating Abandoned Wells
ASTM D 5875 : 1995 : R2000 Standard Guide for Use of Cable-Tool Drilling and Sampling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices

View more information
US$90.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.