• ASTM D 6026 : 2021

    Current The latest, up-to-date edition.
    Add to Watchlist
    This Standard has been added successfully to your Watchlist.
    Please visit My Watchlist to see all standards that you are watching.
    Please log in or to add this standard to your Watchlist.
    We could not add this standard to your Watchlist.
    Please retry or contact support for assistance.
    We could not add this standard to your Watchlist.
    Please retry or contact support for assistance.
    You have already added this standard to your Watchlist.
    Visit My Watchlist to view the full list.

    Standard Practice for Using Significant Digits and Data Records in Geotechnical Data

    Available format(s):  Hardcopy, PDF

    Language(s):  English

    Published date:  07-01-2021

    Publisher:  American Society for Testing and Materials

    Add to Watchlist

    Add To Cart

    Scope - (Show below) - (Hide below)

    1.1Using significant digits in geotechnical data involves the processes of collecting, calculating, and recording either measured values or calculated values (results) or both. This practice is intended to promote uniformity in recording significant digits for measured and calculated values involving geotechnical data.

    1.2The guidelines presented are industry standard and are representative of the significant digits that should be retained in general. The guidelines do not consider material variation, the purpose for obtaining the data, special purpose studies, or any considerations for the user's objectives, and it is common practice to increase or reduce significant digits of reported data to be commensurate with these considerations.

    1.3It is beyond the scope of this practice to consider significant digits used in analysis methods for engineering design.

    1.4This practice accepts a variation of the traditional rounding method that recognizes the algorithm common to most hand-held calculators and computers, see 6.2.3. The traditional rounding method (see 6.2) is in accordance with Practice E29, ASTM Manual 7, or IEEE/ASTM SI 10.

    Note 1:Calculators and computers often present and use many digits in their output and calculations, which may not all be significant. It is the responsibility of the programmer and user to make sure that the measured and calculated values are handled, interpreted and reported properly using these guidelines.

    1.5This practice offers a set of instructions for performing one or more specific operations. This document cannot replace education or experience and should be used in conjunction with professional judgment. Not all aspects of this practice may be applicable in all circumstances. This ASTM standard is not intended to represent or replace the standard of care by which the adequacy of a given professional service must be judged, nor should this document be applied without consideration of a project’s many unique aspects. The word “Standard” in the title means only that the document has been approved through the ASTM consensus process.

    1.6This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

    General Product Information - (Show below) - (Hide below)

    Committee D 18
    Document Type Standard Practice
    Publisher American Society for Testing and Materials
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    ASTM D 6393/D6393M : 2021 Standard Test Method for Bulk Solids Characterization by Carr Indices
    ASTM D 7891 : 2015 Standard Test Method for Shear Testing of Powders Using the Freeman Technology FT4 Powder Rheometer Shear Cell
    ASTM D 4544 : 2020 Standard Practice for Estimating Peat Deposit Thickness
    ASTM D 4531 : 2015 Standard Test Methods for Bulk and Dry Density of Peat and Peat Products
    ASTM D 7276 : 2016 Standard Guide for Analysis and Interpretation of Test Data for Articulating Concrete Block (ACB) Revetment Systems in Open Channel Flow
    ASTM D 7986 : 2017 : REV A Standard Practice for Preparing Specimens of Hydraulic Erosion Control Products for Index Property Testing
    ASTM D 5778 : 2020 Standard Test Method for Electronic Friction Cone and Piezocone Penetration Testing of Soils
    ASTM D 8082 : 2018 Standard Specification for Elemental Impurity Limits in Erosion Control Products used for Land Application
    ASTM D 8106 : 2017 Standard Test Methods for Determining the Oil Sorption Capacity of Organophilic Clay
    ASTM D 7300 : 2018 Standard Test Method for Laboratory Determination of Strength Properties of Frozen Soil at a Constant Rate of Strain
    ASTM D 4630 : 2019 Standard Test Method for Determining Transmissivity and Storage Coefficient of Low-Permeability Rocks by In Situ Measurements Using the Constant Head Injection Test
    ASTM D 7100 : 2011 : R2020 Standard Test Method for Hydraulic Conductivity Compatibility Testing of Soils with Aqueous Solutions
    ASTM D 8326 : 2021 Standard Practice for Measurement of the Kinetic Energy of Simulated Rainfall
    ASTM D 3967 : 2016 Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens
    ASTM D 7928 : 2021 : EDT 1 Standard Test Method for Particle-Size Distribution (Gradation) of Fine-Grained Soils Using the Sedimentation (Hydrometer) Analysis
    ASTM D 7380 : 2015 Standard Test Method for Soil Compaction Determination at Shallow Depths Using 5-lb (2.3 kg) Dynamic Cone Penetrometer
    ASTM D 7503 : 2018 Standard Test Method for Measuring the Exchange Complex and Cation Exchange Capacity of Inorganic Fine-Grained Soils
    ASTM D 8281/D8281M : 2021 Standard Test Method for Determining the Presence of Expanding Clays in Rock for Erosion Control Using Ethylene Glycol
    ASTM D 7648/D7648M : 2018 Standard Practice for Active Soil Gas Sampling for Direct Push or Manual-Driven Hand-Sampling Equipment
    ASTM D 8121/D8121M : 2019 Standard Test Method for Approximating the Shear Strength of Cohesive Soils by the Handheld Vane Shear Device
    ASTM D 5195 : 2014 : EDT 1 Standard Test Method for Density of Soil and Rock In-Place at Depths Below Surface by Nuclear Methods
    ASTM D 7353 : 2021 Standard Practice for Sampling of Liquids in Waste Management Activities Using a Peristaltic Pump
    ASTM D 4016 : 2014 Standard Test Method for Viscosity and Gel Time of Chemical Grouts by Rotational Viscometer (Laboratory Method)
    ASTM D 4832 : 2016 : EDT 1 Standard Test Method for Preparation and Testing of Controlled Low Strength Material (CLSM) Test Cylinders
    ASTM D 6528 : 2017 Standard Test Method for Consolidated Undrained Direct Simple Shear Testing of Fine Grain Soils
    ASTM D 4380 : 2020 Standard Test Method for Determining Density of Construction Slurries
    ASTM D 5850 : 2020 Standard Practice for (Analytical Procedure) Determining Transmissivity, Storage Coefficient, and Anisotropy Ratio from a Network of Partially Penetrating Wells
    ASTM D 1556/D1556M : 2015 : EDT 1 Standard Test Method for Density and Unit Weight of Soil in Place by Sand-Cone Method
    ASTM D 3966/D3966M : 2007 : R2013 : EDT 1 Standard Test Methods for Deep Foundations Under Lateral Load
    ASTM D 3551 : 2017 Standard Practice for Laboratory Preparation of Soil-Lime Mixtures Using Mechanical Mixer
    ASTM D 2573/D2573M : 2018 Standard Test Method for Field Vane Shear Test in Saturated Fine-Grained Soils
    ASTM D 1883 : 2016 Standard Test Method for California Bearing Ratio (CBR) of Laboratory-Compacted Soils
    ASTM D 4373 : 2021 Standard Test Method for Rapid Determination of Carbonate Content of Soils
    ASTM D 6473 : 2015 Standard Test Method For Specific Gravity And Absorption of Rock For Erosion Control
    ASTM D 2974 : 2020 : EDT 1 Standard Test Methods for Determining the Water (Moisture) Content, Ash Content, and Organic Material of Peat and Other Organic Soils
    ASTM D 7382 : 2020 Standard Test Methods for Determination of Maximum Dry Unit Weight of Granular Soils Using a Vibrating Hammer
    ASTM D 7759/D7759M : 2021 Standard Guide for Nuclear Surface Moisture and Density Gauge Calibration
    ASTM D 7101 : 2013 : EDT 1 Standard Index Test Method for Determination of Unvegetated Rolled Erosion Control Product (RECP) Ability to Protect Soil from Rain Splash and Associated Runoff Under Bench-Scale Conditions (Withdrawn 2022)
    ASTM D 2216 : 2019 Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass
    ASTM D 4971 : 2016 Standard Test Method for Determining In Situ Modulus of Deformation of Rock Using Diametrically Loaded 76-mm (3-in.) Borehole Jack
    ASTM D 5312/D5312M : 2012 : R2013 Standard Test Method for Evaluation of Durability of Rock for Erosion Control Under Freezing and Thawing Conditions
    ASTM D 5472/D5472M : 2020 Standard Practice for Determining Specific Capacity and Estimating Transmissivity at the Control Well
    ASTM D 8199 : 2020 Standard Test Method for Determining the Specific Strength of Hydraulically Applied Fiber Matrix Products for Erosion Control
    ASTM D 5873 : 2014 Standard Test Method for Determination of Rock Hardness by Rebound Hammer Method
    ASTM D 8232 : 2018 Standard Test Procedures for Measuring the Inclination of Deep Foundations
    ASTM D 4943 : 2018 Standard Test Method for Shrinkage Factors of Cohesive Soils by the Water Submersion Method
    ASTM D 4403 : 2020 Standard Practice for Extensometers Used in Rock
    ASTM D 7698 : 2021 Standard Test Method for In-Place Estimation of Density and Water Content of Soil and Aggregate by Correlation with Complex Impedance Method
    ASTM D 698 : 2012 : EDT 2 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 ft-lbf/ft3 (600 kN-m/m3))
    ASTM D 4221 : 2018 Standard Test Method for Dispersive Characteristics of Clay Soil by Double Hydrometer
    ASTM D 5912 : 2020 Standard Practice for (Analytical Procedure) Determining Hydraulic Conductivity of an Unconfined Aquifer by Overdamped Well Response to Instantaneous Change in Head (Slug)
    ASTM D 8152 : 2018 Standard Practice for Measuring Field Infiltration Rate and Calculating Field Hydraulic Conductivity Using the Modified Philip Dunne Infiltrometer Test
    ASTM D 1587/D1587M : 2015 Standard Practice for Thin-Walled Tube Sampling of Fine-Grained Soils for Geotechnical Purposes
    ASTM D 2850 : 2015 Standard Test Method for Unconsolidated-Undrained Triaxial Compression Test on Cohesive Soils
    ASTM D 4631 : 2018 Standard Test Method for Determining Transmissivity and Storativity of Low Permeability Rocks by In Situ Measurements Using Pressure Pulse Technique
    ASTM D 7765 : 2018 : REV A Standard Practice for Use of Foundry Sand in Structural Fill and Embankments
    ASTM D 586 : 2019 Standard Test Method for Ash and Organic Matter Content of Degradable Erosion Control Products
    ASTM D 4959 : 2016 Standard Test Method for Determination of Water Content of Soil By Direct Heating
    ASTM D 6635 : 2015 Standard Test Method for Performing the Flat Plate Dilatometer
    ASTM D 2844/D2844M : 2018 Standard Test Method for Resistance R-Value and Expansion Pressure of Compacted Soils
    ASTM D 4643 : 2017 Standard Test Method for Determination of Water Content of Soil and Rock by Microwave Oven Heating
    ASTM D 7277 : 2016 Standard Test Method for Performance Testing of Articulating Concrete Block (ACB) Revetment Systems for Hydraulic Stability in Open Channel Flow
    ASTM D 425 : 2017 Standard Test Method for Centrifuge Moisture Equivalent of Soils
    ASTM D 4535 : 2021 Standard Test Methods for Measurement of Thermal Expansion of Rock Using Dilatometer
    ASTM D 4506 : 2013 : EDT 1 Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using Radial Jacking Test
    ASTM D 2976 : 2015 Standard Test Method for pH of Peat Materials
    ASTM D 7458 : 2014 Standard Test Method for Determination of Beryllium in Soil, Rock, Sediment, and Fly Ash Using Ammonium Bifluoride Extraction and Fluorescence Detection
    ASTM D 5473/D5473M : 2020 Standard Practice for (Analytical Procedures) Analyzing the Effects of Partial Penetration of Control Well and Determining the Horizontal and Vertical Hydraulic Conductivity in a Nonleaky Confined Aquifer
    ASTM D 7383 : 2019 Standard Test Methods for Axial Rapid Load (Compressive Force Pulse) Testing of Deep Foundations
    ASTM D 5451 : 2021 Standard Practice for Sampling Using a Trier Sampler
    ASTM D 8107 : 2018 Standard Practice for Determining Sediment Pond Skimmer Flow Rate
    ASTM D 4945 : 2017 Standard Test Method for High-Strain Dynamic Testing of Deep Foundations
    ASTM D 8359 : 2020 Standard Test Method for Determining the In Situ Rock Deformation Modulus and Other Associated Rock Properties Using a Flexible Volumetric Dilatometer
    ASTM D 1633 : 2017 Standard Test Methods for Compressive Strength of Molded Soil-Cement Cylinders
    ASTM D 4718/D4718M : 2015 Standard Practice for Correction of Unit Weight and Water Content for Soils Containing Oversize Particles
    ASTM D 5737/D5737M : 2019 Standard Guide for Methods for Measuring Well Discharge
    ASTM D 5143 : 2006 : R2015 : EDT 1 Standard Test Method for Analysis of Nitroaromatic and Nitramine Explosive in Soil by High Performance Liquid Chromatography
    ASTM D 1557 : 2012 : EDT 1 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3))
    ASTM D 7608 : 2018 Standard Test Method for Torsional Ring Shear Test to Measure Drained Fully Softened Shear Strength and Stress Dependent Strength Envelope of Fine-Grained Soils
    ASTM D 2937 : 2017 : EDT 2 Standard Test Method for Density of Soil in Place by the Drive-Cylinder Method
    ASTM D 7949 : 2014 Standard Test Methods for Thermal Integrity Profiling of Concrete Deep Foundations
    ASTM D 4729 : 2019 Standard Test Method for In Situ Stress and Modulus of Deformation Using the Flat Jack Method
    ASTM D 6780/D6780M : 2019 Standard Test Methods for Water Content and Density of Soil In situ by Time Domain Reflectometry (TDR)
    ASTM D 5785/D5785M : 2020 Standard Practice for (Analytical Procedure) for Determining Transmissivity of Confined Nonleaky Aquifers by Underdamped Well Response to Instantaneous Change in Head (Slug Test)
    ASTM D 6030 : 2015 Standard Guide for Selection of Methods for Assessing Groundwater or Aquifer Sensitivity and Vulnerability
    ASTM D 4435 : 2013 : EDT 1 Standard Test Method for Rock Bolt Anchor Pull Test (Withdrawn 2022)
    ASTM D 5876/D5876M : 2017 Standard Guide for Use of Direct Rotary Wireline Casing Advancement Drilling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices
    ASTM D 5495 : 2021 Standard Practice for Sampling with a Composite Liquid Waste Sampler (COLIWASA)
    ASTM D 7263 : 2021 Standard Test Methods for Laboratory Determination of Density and Unit Weight of Soil Specimens
    ASTM D 6760 : 2016 Standard Test Method for Integrity Testing of Concrete Deep Foundations by Ultrasonic Crosshole Testing
    ASTM D 5918 : 2013 : EDT 1 Standard Test Methods for Frost Heave and Thaw Weakening Susceptibility of Soils (Withdrawn 2022)
    ASTM D 7664 : 2010 : R2018 : EDT 1 Standard Test Methods for Measurement of Hydraulic Conductivity of Unsaturated Soils
    ASTM D 5882 : 2016 Standard Test Method for Low Strain Impact Integrity Testing of Deep Foundations
    ASTM D 4105/D4105M : 2020 Standard Practice for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Nonleaky Confined Aquifers by the Modified Theis Nonequilibrium Method
    ASTM D 5220/D5220M : 2021 Standard Test Method for Water Mass per Unit Volume of Soil and Rock In-Place by the Neutron Depth Probe Method
    ASTM D 7299 : 2020 Standard Practice for Verifying Performance of a Vertical Inclinometer Probe
    ASTM D 6276 : 2019 Standard Test Method for Using pH to Estimate the Soil-Lime Proportion Requirement for Soil Stabilization
    ASTM D 4395 : 2017 Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using Flexible Plate Loading Method
    ASTM D 6467 : 2013 : EDT 1 Standard Test Method for Torsional Ring Shear Test to Determine Drained Residual Shear Strength of Cohesive Soils
    ASTM D 4543 : 2019 Standard Practices for Preparing Rock Core as Cylindrical Test Specimens and Verifying Conformance to Dimensional and Shape Tolerances
    ASTM D 5982 : 2015 Standard Test Method for Determining Cement Content of Fresh Soil-Cement (Heat of Neutralization Method)
    ASTM D 559/D559M : 2015 Standard Test Methods for Wetting and Drying Compacted Soil-Cement Mixtures
    ASTM D 5779/D5779M : 2014 Standard Test Method for Field Determination of Rapid Specific Gravity of Rock and Manmade Materials for Erosion Control
    ASTM D 4553 : 2018 Standard Test Method for Determining In Situ Creep Characteristics of Rock
    ASTM D 8249 : 2019 Standard Practice for Use of Rotary Kiln Produced Porous Ceramic as a Mineral Amendment in Topsoil Used for Landscaping and Related Purposes
    ASTM D 1634 : 2017 Standard Test Method for Compressive Strength of Soil-Cement Using Portions of Beams Broken in Flexure (Modified Cube Method)
    ASTM D 1997 : 2020 Standard Test Method for Laboratory Determination of the Fiber Content of Peat and Organic Soils by Dry Mass
    ASTM D 7262 : 2010 : R2016 : EDT 1 Standard Test Method for Estimating the Permanganate Natural Oxidant Demand of Soil and Aquifer Solids
    ASTM D 4829 : 2021 Standard Test Method for Expansion Index of Soils
    ASTM D 5334 : 2014 Standard Test Method for Determination of Thermal Conductivity of Soil and Soft Rock by Thermal Needle Probe Procedure
    ASTM D 6103/D6103M : 2017 : EDT 1 Standard Test Method for Flow Consistency of Controlled Low Strength Material (CLSM)
    ASTM D 7012 : 2014 : EDT 1 Standard Test Methods for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures
    ASTM D 7481 : 2018 Standard Test Methods for Determining Loose and Tapped Bulk Densities of Powders using a Graduated Cylinder
    ASTM D 4525 : 2013 : EDT 2 Standard Test Method for Permeability of Rocks by Flowing Air (Withdrawn 2022)
    ASTM D 5311/D5311M : 2013 Standard Test Method for Load Controlled Cyclic Triaxial Strength of Soil (Withdrawn 2022)
    ASTM D 6459 : 2019 Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Performance in Protecting Hillslopes from Rainfall-Induced Erosion
    ASTM D 6725/D6725M : 2016 Standard Practice for Direct Push Installation of Prepacked Screen Monitoring Wells in Unconsolidated Aquifers
    ASTM D 6519 : 2015 Standard Practice for Sampling of Soil Using the Hydraulically Operated Stationary Piston Sampler
    ASTM D 4644 : 2016 Standard Test Method for Slake Durability of Shales and Other Similar Weak Rocks
    ASTM D 5269 : 2015 Standard Test Method for Determining Transmissivity of Nonleaky Confined Aquifers by the Theis Recovery Method
    ASTM D 6151/D6151M : 2015 Standard Practice for Using Hollow-Stem Augers for Geotechnical Exploration and Soil Sampling
    ASTM D 5520 : 2018 Standard Test Method for Laboratory Determination of Creep Properties of Frozen Soil Samples by Uniaxial Compression
    ASTM D 7181 : 2020 Standard Test Method for Consolidated Drained Triaxial Compression Test for Soils
    ASTM D 5519 : 2015 Standard Test Methods for Particle Size Analysis of Natural and Man-Made Riprap Materials
    ASTM D 4394 : 2017 Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using Rigid Plate Loading Method
    ASTM D 5855/D5855M : 2020 Standard Practice for (Analytical Procedure) Determining Transmissivity and Storage Coefficient of Confined Nonleaky or Leaky Aquifer by Constant Drawdown Method in Flowing Well
    ASTM D 4050 : 2020 Standard Test Method for (Field Procedure) for Withdrawal and Injection Well Testing for Determining Hydraulic Properties of Aquifer Systems
    ASTM D 5299/D5299M : 2018 Standard Guide for Decommissioning of Groundwater Wells, Vadose Zone Monitoring Devices, Boreholes, and Other Devices for Environmental Activities
    ASTM D 4719 : 2020 Standard Test Methods for Prebored Pressuremeter Testing in Soils
    ASTM D 4944 : 2018 Standard Test Method for Field Determination of Water (Moisture) Content of Soil by the Calcium Carbide Gas Pressure Tester
    ASTM D 4542 : 2015 Standard Test Methods for Pore Water Extraction and Determination of the Soluble Salt Content of Soils by Refractometer
    ASTM D 6475 : 2017 Standard Test Method for Measuring Mass per Unit Area of Erosion Control Blankets
    ASTM D 4015 : 2015 : EDT 1 Standard Test Methods for Modulus and Damping of Soils by Fixed-Base Resonant Column Devices
    ASTM D 4554 : 2012 Standard Test Method for In Situ Determination of Direct Shear Strength of Rock Discontinuities (Withdrawn 2021)
    ASTM D 2978 : 2015 : EDT 1 Standard Test Methods for Volume of Processed Peat Materials
    ASTM D 4623 : 2016 Standard Test Method for Determination of In Situ Stress in Rock Mass by Overcoring Method—Three Component Borehole Deformation Gauge
    ASTM D 6023 : 2016 Standard Test Method for Density (Unit Weight), Yield, Cement Content, and Air Content (Gravimetric) of Controlled Low-Strength Material (CLSM)
    ASTM D 5731 : 2016 Standard Test Method for Determination of the Point Load Strength Index of Rock and Application to Rock Strength Classifications
    ASTM D 6128 : 2016 Standard Test Method for Shear Testing of Bulk Solids Using the Jenike Shear Tester
    ASTM D 4253 : 2016 : EDT 1 Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table
    ASTM D 4767 : 2011 : R2020 Standard Test Method for Consolidated Undrained Triaxial Compression Test for Cohesive Soils
    ASTM D 8151 : 2019 : EDT 1 Standard Practice for Obtaining Rainfall Runoff from Unvegetated Rolled and Hydraulic Erosion Control Products (RECPs and HECPs) for Acute Ecotoxicity Testing
    ASTM D 3689/D3689M : 2007 : R2013 : EDT 1 Standard Test Methods for Deep Foundations Under Static Axial Tensile Load
    ASTM D 6683 : 2019 Standard Test Method for Measuring Bulk Density Values of Powders and Other Bulk Solids as Function of Compressive Stress
    ASTM D 5787 : 2020 Standard Practice for Monitoring Well Protection At or Near Land Surface
    ASTM D 4186/D4186M : 2020 : EDT 1 Standard Test Method for One-Dimensional Consolidation Properties of Saturated Cohesive Soils Using Controlled-Strain Loading
    ASTM D 6913/D6913M : 2017 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
    ASTM D 6391 : 2011 : R2020 Standard Test Method for Field Measurement of Hydraulic Conductivity Using Borehole Infiltration
    ASTM D 1140 : 2017 Standard Test Methods for Determining the Amount of Material Finer than 75-μm (No. 200) Sieve in Soils by Washing
    ASTM D 4318 : 2017 : EDT 1 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils
    ASTM D 7352 : 2018 Standard Practice for Volatile Contaminant Logging Using a Membrane Interface Probe (MIP) in Unconsolidated Formations with Direct Push Methods
    ASTM D 5268 : 2019 : EDT 1 Standard Specification for Topsoil Used for Landscaping and Construction Purposes
    ASTM D 4611 : 2016 Standard Test Method for Specific Heat of Rock and Soil
    ASTM D 4612 : 2016 Standard Test Method for Calculating Thermal Diffusivity of Rock and Soil
    ASTM D 6572 : 2021 Standard Test Methods for Determining Dispersive Characteristics of Clayey Soils by the Crumb Test
    ASTM D 2166/D2166M : 2016 Standard Test Method for Unconfined Compressive Strength of Cohesive Soil
    ASTM D 7351 : 2019 Standard Test Method for Determination of Sediment Retention Device (SRD) Effectiveness in Sheet Flow Applications
    ASTM D 2435/D2435M : 2011 : R2020 Standard Test Methods for One-Dimensional Consolidation Properties of Soils Using Incremental Loading
    ASTM D 5335 : 2014 Standard Test Method for Linear Coefficient of Thermal Expansion of Rock Using Bonded Electric Resistance Strain Gauges
    ASTM D 7015/D7015M : 2018 Standard Practices for Obtaining Intact Block (Cubical and Cylindrical) Samples of Soils
    ASTM D 2973 : 2016 Standard Test Method for Total Nitrogen in Peat Materials
    ASTM D 6836 : 2016 Standard Test Methods for Determination of the Soil Water Characteristic Curve for Desorption Using Hanging Column, Pressure Extractor, Chilled Mirror Hygrometer, or Centrifuge
    ASTM D 8289 : 2020 Standard Test Method for Tensile Strength Estimate by Disc Compression of Manufactured Graphite
    ASTM D 7400/D7400M : 2019 Standard Test Methods for Downhole Seismic Testing
    ASTM D 5874 : 2016 Standard Test Methods for Determination of the Impact Value (IV) of a Soil
    ASTM D 5080 : 2020 Standard Test Method for Rapid Determination of Percent Compaction
    ASTM D 2980 : 2017 : EDT 1 Standard Test Method for Saturated Density, Moisture-Holding Capacity, and Porosity of Saturated Peat Materials
    ASTM D 6032/D6032M : 2017 Standard Test Method for Determining Rock Quality Designation (RQD) of Rock Core
    ASTM D 8037/D8037M : 2016 Standard Practice for Direct Push Hydraulic Logging for Profiling Variations of Permeability in Soils
    ASTM D 4546 : 2021 Standard Test Methods for One-Dimensional Swell or Collapse of Soils
    ASTM D 8169/D8169M : 2018 Standard Test Methods for Deep Foundations Under Bi-Directional Static Axial Compressive Load
    ASTM D 420 : 2018 Standard Guide for Site Characterization for Engineering Design and Construction Purposes
    ASTM D 4452 : 2014 Standard Practice for X-Ray Radiography of Soil Samples
    ASTM D 8198 : 2018 Standard Specification for Hydraulically Applied 100 % Wood Fiber Mulches
    ASTM D 7208 : 2014 : EDT 1 Standard Test Method for Determination of Temporary Ditch Check Performance in Protecting Earthen Channels from Stormwater-Induced Erosion
    ASTM D 653 : 2021 Standard Terminology Relating to Soil, Rock, and Contained Fluids
    ASTM D 7760 : 2018 Standard Test Method for Measurement of Hydraulic Conductivity of Materials Derived from Scrap Tires Using a Rigid Wall Permeameter
    ASTM D 7560 : 2016 : EDT 1 Standard Test Method for Determination of Fiber Length Percentages in Hydraulic Erosion Control Products (HECPs)
    ASTM D 5878 : 2019 Standard Guides for Using Rock-Mass Classification Systems for Engineering Purposes
    ASTM D 5782 : 2018 Standard Guide for Use of Direct Air-Rotary Drilling for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
    ASTM D 806 : 2019 Standard Test Method for Cement Content of Hardened Soil-Cement Mixtures
    ASTM D 5240/D5240M : 2020 Standard Test Method for Evaluation of the Durability of Rock for Erosion Control Using Sodium Sulfate or Magnesium Sulfate
    ASTM D 1143/D1143M : 2020 Standard Test Methods for Deep Foundation Elements Under Static Axial Compressive Load
    ASTM D 4647/D4647M : 2013:R2020 Standard Test Methods for Identification and Classification of Dispersive Clay Soils by the Pinhole Test
    ASTM D 560/D560M : 2016 Standard Test Methods for Freezing and Thawing Compacted Soil-Cement Mixtures
    ASTM D 4404 : 2018 Standard Test Method for Determination of Pore Volume and Pore Volume Distribution of Soil and Rock by Mercury Intrusion Porosimetry
    ASTM D 1635/D1635M : 2019 Standard Test Method for Flexural Strength of Soil-Cement Using Simple Beam with Third-Point Loading
    ASTM D 6024/D6024M : 2016 Standard Test Method for Ball Drop on Controlled Low Strength Material (CLSM) to Determine Suitability for Load Application
    ASTM D 6773 : 2016 Standard Test Method for Bulk Solids Using Schulze Ring Shear Tester
    ASTM D 6914/D6914M : 2016 Standard Practice for Sonic Drilling for Site Characterization and the Installation of Subsurface Monitoring Devices
    ASTM D 5126 : 2016 : EDT 1 Standard Guide for Comparison of Field Methods for Determining Hydraulic Conductivity in Vadose Zone
    ASTM D 4648/D4648M : 2016 Standard Test Methods for Laboratory Miniature Vane Shear Test for SaturatedFine-Grained Clayey Soil
    ASTM D 7626 : 2019 : EDT 1 Standard Test Methods for Determining the Organic Treat Loading of Organophilic Clay
    ASTM D 2936 : 2020 Standard Test Method for Direct Tensile Strength of Intact Rock Core Specimens
    ASTM D 5092/D5092M : 2016 Standard Practice for Design and Installation of Groundwater Monitoring Wells
    ASTM D 6001/D6001M : 2020 Standard Guide for Direct-Push Groundwater Sampling for Environmental Site Characterization
    ASTM D 5550 : 2014 Standard Test Method for Specific Gravity of Soil Solids by Gas Pycnometer
    ASTM D 2977 : 2014 Standard Practice for Particle Size Range of Peat Materials for Horticultural Purposes
    ASTM D 5716/D5716M : 2020 Standard Test Method for Measuring the Rate of Well Discharge by Circular Orifice Weir
    ASTM D 5783 : 2018 Standard Guide for Use of Direct Rotary Drilling with Water-Based Drilling Fluid for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
    ASTM D 6724/D6724M : 2016 Standard Guide for Installation of Direct Push Groundwater Monitoring Wells
    ASTM D 6230 : 2021 Standard Practices for Monitoring Earth or Structural Movement Using Inclinometers
    ASTM D 4633 : 2016 Standard Test Method for Energy Measurement for Dynamic Penetrometers
    ASTM D 5607 : 2016 Standard Test Method for Performing Laboratory Direct Shear Strength Tests of Rock Specimens Under Constant Normal Force
    ASTM D 4254 : 2016 Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density
    ASTM D 5121 : 2015 Standard Practice for Preparation of Rock Slabs for Durability Testing
    ASTM D 5881 : 2020 Standard Practice for (Analytical Procedures) Determining Transmissivity of Confined Nonleaky Aquifers by Critically Damped Well Response to Instantaneous Change in Head (Slug)
    ASTM D 6938 : 2017 : REV A : EDT 1 Standard Test Methods for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
    ASTM D 4972 : 2019 Standard Test Methods for pH of Soils
    ASTM D 4436 : 2013 : EDT 1 Standard Test Method for Rock Bolt Long-Term Load Retention Test (Withdrawn 2022)
    ASTM D 7070 : 2016 Standard Test Methods for Creep of Rock Core Under Constant Stress and Temperature
    ASTM D 2167 : 2015 Standard Test Method for Density and Unit Weight of Soil in Place by the Rubber Balloon Method
    ASTM D 8167/D8167M : 2018 : REV A Standard Test Method for In-Place Bulk Density of Soil and Soil-Aggregate by a Low-Activity Nuclear Method (Shallow Depth)
    ASTM D 6067/D6067M : 2017 Standard Practice for Using the Electronic Piezocone Penetrometer Tests for Environmental Site Characterization and Estimation of Hydraulic Conductivity
    ASTM D 4428/D4428M : 2014 Standard Test Methods for Crosshole Seismic Testing
    ASTM D 4044/D4044M : 2015 Standard Test Method for (Field Procedure) for Instantaneous Change in Head (Slug) Tests for Determining Hydraulic Properties of Aquifers
    ASTM D 854 : 2014 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer
    ASTM D 3550/D3550M : 2017 Standard Practice for Thick Wall, Ring-Lined, Split Barrel, Drive Sampling of Soils
    ASTM D 7830/D7830M : 2014 Standard Test Method for In-Place Density (Unit Weight) and Water Content of Soil Using an Electromagnetic Soil Density Gauge
    ASTM D 6027/D6027M : 2015 Standard Practice for Calibrating Linear Displacement Transducers for Geotechnical Purposes
    ASTM D 1452/D1452M : 2016 Standard Practice for Soil Exploration and Sampling by Auger Borings
    ASTM D 5084 : 2016 : REV A Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter
    ASTM D 1586/D1586M : 2018 Standard Test Method for Standard Penetration Test (SPT) and Split-Barrel Sampling of Soils
    ASTM D 4223/D4223M : 2020 Standard Practices for Preparation of Test Specimens of Asphalt-Stabilized Soils
    ASTM D 3441 : 2016 Standard Test Method for Mechanical Cone Penetration Testing of Soils
    ASTM D 4914/D4914M : 2016 Standard Test Methods for Density of Soil and Rock in Place by the Sand Replacement Method in a Test Pit
    ASTM D 4106 : 2020 Standard Practice for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Nonleaky Confined Aquifers by the Theis Nonequilibrium Method
    ASTM D 1632 : 2017 : EDT 1 Standard Practice for Making and Curing Soil-Cement Compression and Flexure Test Specimens in the Laboratory
    ASTM D 4511 : 2011 : R2020 Standard Test Method for Hydraulic Conductivity of Essentially Saturated Peat
    ASTM D 5093 : 2015 : EDT 1 Standard Test Method for Field Measurement of Infiltration Rate Using Double-Ring Infiltrometer with Sealed-Inner Ring
    ASTM D 6539 : 2013 Standard Test Method for Measurement of the Permeability of Unsaturated Porous Materials by Flowing Air (Withdrawn 2022)
    ASTM D 5030/D5030M : 2021 Standard Test Methods for Density of In-Place Soil and Rock Materials by the Water Replacement Method in a Test Pit
    ASTM D 5202/D5202M : 2016 Standard Test Method for Determining Triaxial Compression Creep Strength of Chemically Grouted Soils
    ASTM D 5780 : 2018 Standard Test Methods for Individual Piles in Permafrost Under Static Axial Compressive Load
    ASTM D 7047 : 2015 : EDT 1 Standard Test Method for Swell Volume of Plantago Insularis (Ovata, Psyllium)
    ASTM D 7367 : 2019 : EDT 2 Standard Test Method for Determining Water Holding Capacity of Fiber Mulches for Hydraulic Planting
    ASTM D 7013/D7013M : 2015 Standard Guide for Calibration Facility Setup for Nuclear Surface Gauges
    ASTM D 5313/D5313M : 2021 Standard Test Method for Evaluation of Durability of Rock for Erosion Control Under Wetting and Drying Conditions

    Standards Referencing This Book - (Show below) - (Hide below)

    ASTM E 29 : 2013 : R2019 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
    ASTM E 456 : 2013 : REV A : R2022 Standard Terminology Relating to Quality and Statistics
    ASTM E 456 : 2013 : REV A : R2017 : EDT 5 Standard Terminology Relating to Quality and Statistics
    ASTM D 653 : 2021 : REV A Standard Terminology Relating to Soil, Rock, and Contained Fluids
    ASTM D 653 : 2021 Standard Terminology Relating to Soil, Rock, and Contained Fluids
    ASTM D 653 : 2021 : REV B Standard Terminology Relating to Soil, Rock, and Contained Fluids
    ASTM E 456 : 2013 : REV A : R2017 : EDT 6 Standard Terminology Relating to Quality and Statistics
    ASTM E 29 : 2022 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective