IEC 61076-1:2006
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Connectors for electronic equipment - Product requirements - Part 1: Generic specification
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
01-25-2019
English - French
04-27-2006
FOREWORD
INTRODUCTION
1 General
1.1 Scope
1.2 General considerations relating to specifications
1.3 Normative references
1.4 Performance characteristics
2 Technical information
2.1 Terms and definitions
2.2 System of levels
2.3 Classification into climatic categories
2.4 Clearance and creepage distances
2.5 Current-carrying capacity
2.6 IEC type designation
2.7 Marking
3 Dimensional information
3.1 Drawings and dimensions
3.2 System of lettering
3.3 Purpose
3.4 Detailed information
3.5 Gauges
4 Quality assessment procedures
5 Tests and test schedules
5.1 General aspects
5.2 Test schedules
5.3 Test procedures and measuring methods
5.4 Preconditioning
5.5 Wiring and mounting of specimens
Annex A (normative) Common lettering system to be used
in drawings
Figures
Table
Establishes uniform specifications and technical information for connectors. Is applicable to a family of connectors for use in electronic and electrical equipment; does not cover connectors designed for use at radio frequencies.
Committee |
TC 48/SC 48B
|
DevelopmentNote |
To be used in conjunction with IEC 62197-1 (05/2006) Stability Date: 2017. (09/2017)
|
DocumentType |
Standard
|
Pages |
59
|
ProductNote |
NEW CHILD CREATED AMD 1
|
PublisherName |
International Electrotechnical Committee
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
NEN EN IEC 61076-1 : 2006 | Identical |
I.S. EN 61076-1:2006&A1:2019 | Identical |
PN EN 61076-1 : 2007 | Identical |
BS EN 61076-1:2006+A1:2019 | Identical |
BS EN 61076-1:2006 | Identical |
EN 61076-1:2006 | Identical |
DIN EN 61076-1:2007-02 | Identical |
JIS C 5401-1:2015 | Identical |
NEN 11076-1 : 1997 AMD 1 1997 | Identical |
UNE-EN 61076-1:2006 | Identical |
UNE EN 61076-1 : 1997 A2 2002 | Identical |
CEI EN 61076-1 : 2007 | Identical |
SAC GB/T 18501.1 : 2001 | Identical |
UNE EN 61076-1 : 1997 A2 2002 | Identical |
BS EN 61076-2-102:2002 | Connectors for electronic equipment. Circular connectors Circular connectors with assessed quality. Detail specification for plugs and jacks for external low voltage power supply |
BS EN 61076-3-112:2006 | Connectors for electronic equipment Rectangular connectors - Detail specification for rectangular connectors with four contacts for high performance serial bus for consumer audio/video equipment |
14/30250046 DC : 0 | BS EN 61076-2-111 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-111: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR POWER CONNECTORS WITH M12 SCREW-LOCKING |
02/206148 DC : 0 | IEC 60603-7-5. ED. 1.0 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-5: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS, FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 250 MHZ (CAT 6, SHIELDED) |
BS EN 61076-4-115:2003 | Connectors for electronic equipment. Printed board connectors with assessed quality Backplane connector for InfiniBand equipment |
12/30270756 DC : 0 | BS EN 61076-3-104 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-104: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED FREE AND FIXED CONNECTORS FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 2000 MHZ |
NF EN 61076 4 100 : 2002 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 4-100: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR TWO-PART CONNECTOR MODULES HAVING A GRID OF 2,5 MM FOR PRINTED BOARDS AND BACKPLANES |
BS EN 60512-29-100:2015 | Connectors for electronic equipment. Tests and measurements Signal integrity tests up to 500 MHz on M12 style connectors. Tests 29a to 29g |
IEC PAS 61076-3-116:2005 | Connectors for electronic equipment - Part 3-116: Rectangular connectors - Protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 13 related to IEC 61076-3-106 - Bayonet coupling with spring clamp |
BS EN 61076-3-115:2010 | Connectors for electronic equipment. Product requirements Rectangular connectors. Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface. Variant 12 related to IEC 61076-3-106. Push-pull type |
BS EN 60512-27-100:2012 | Connectors for electronic equipment. Tests and measurements Signal integrity tests up to 500 MHz on IEC 60603-7 series connectors. Tests 27a to 27g |
00/201724 DC : DRAFT APR 2000 | IEC 61076-1 - CONNECTORS - PRODUCT REQUIREMENTS - PART 1: GENERIC SPECIFICATION |
IEC PAS 60603-7-3:2004 | Connectors for electronic equipment - Part 7-3: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 100 MHz |
BS EN 61076-4-101:2001 | Connectors for electronic equipment Printed board connectors with assessed quality. Detail specification for two-part connector modules, having a basic grid of 2,0 mm for printed boards and backplanes in accordance with IEC 60917 |
04/30112330 DC : 0 | IEC 61076-3-113 ED.1 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 3-113: SCREENED, SERIAL MULTI-CONDUCTOR CABLE TO BOARD CONNECTORS SUITABLE FOR 10 GBIT/SEC DATA RATES |
CEI EN 61076-3-116 : 2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-116: RECTANGULAR CONNECTORS - PROTECTIVE HOUSINGS FOR USE WITH 8- WAY SHIELDED AND UNSHIELDED CONNECTORS FOR FREQUENCIES UP TO 600 MHZ FOR INDUSTRIAL ENVIRONMENTS INCORPORATING THE IEC 60603-7 SERIES INTERFACE - VARIANT 13 RELATED TO IEC 61076-3-106 - LOCKING LEVER |
PD IEC TR 62225:2001 | Guidance on terms for connectors and mechanical structures in electronic equipment |
07/30165274 DC : 0 | BS EN 61076-2-106 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-106: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CIRCULAR CONNECTORS M16 * 0.75 WITH SCREW-LOCKING DEGREE OF PROTECTION IP40 |
02/206147 DC : DRAFT AUG 2002 | IEC 60603-7-4 ED.1.0 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-4: DETAIL SPECIFICATION FOR 8-WAY, UNSHIELDED, FREE AND FIXED CONNECTORS, FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 250 MHZ (CAT 6, UNSHIELDED) |
BS EN 61076-3-100:2000 | Connectors for use in d.c., low-frequency analogue and digital high-speed data applications Rectangular connectors with assessed quality - Detail specification for a range of shielded connectors with trapezoidal-shaped shells and non-removable ribbon contacts on a 1,27 mm double row |
BS EN 61076-4-001:1997 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors Blank detail specification |
CEI EN 61076-7-100 : 2007 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS PART 7-100: CABLE OUTLET ACCESSORIES - DETAIL SPECIFICATION FOR A METRIC CABLE SEALING CONSISTING OF AN INTEGRATED PART OF HEAVY-DUTY RECTANGULAR OR CIRCULAR CONNECTOR HOODS AND A SEALING SYSTEM |
03/100395 DC : DRAFT APR 2003 | EN 175101-809 - DETAIL SPECIFICATION - TWO-PART CONNECTORS FOR PRINTED BOARDS HAVING A GRID OF 2,54 MM, SHORT VERSION IN COMPLIANCE WITH CECC 75 101-801, WITH ASSESSED QUALITY |
IEC PAS 61076-2-114:2016 | Connectors for electronic equipment - Product requirements - Part 2-114: Circular connectors - Detail specification for data and power connectors with M8 screw-locking |
CEI EN 61076-2-102 : 2003 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 2-102: CIRCULAR CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR PLUGS AND JACKS FOR EXTERNAL LOW VOLTAGE POWER SUPPLY |
NF EN 61076-3-114 : 2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-114: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR PROTECTIVE HOUSINGS FOR USE WITH 8-WAY SHIELDED AND UNSHIELDED CONNECTORS FOR FREQUENCIES UP TO 600 MHZ FOR INDUSTRIAL ENVIRONMENTS INCORPORATING THE IEC 60603-7 SERIES INTERFACE - VARIANT 11 RELATED TO IEC 61076-3-106 - BAYONET COUPLING TYPE |
I.S. EN 61076-2-107:2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-107: DETAIL SPECIFICATION FOR CIRCULAR HYBRID CONNECTORS M12 WITH ELECTRICAL AND FIBRE-OPTIC CONTACTS WITH SCREW LOCKING |
I.S. EN 61076-3-117:2009 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-117: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR PROTECTIVE HOUSINGS OR USE WITH 8-WAY SHIELDED AND UNSHIELDED CONNECTORS FOR INDUSTRIAL ENVIRONMENTS INCORPORATING THE IEC 60603-7 SERIES INTERFACE - VARIANT 14 RELATED TO IEC 61076-3-106 - PUSH-PULL COUPLING |
I.S. EN 61076-3-120:2016 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-120: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR REWIRABLE POWER CONNECTORS WITH SNAP LOCKING FOR RATED VOLTAGE OF 250 V D.C. AND RATED CURRENT OF 30 A |
IEEE 525-2007 | IEEE Guide for the Design and Installation of Cable Systems in Substations |
CEI EN 61076-4-111 : 2003 | CONNECTORS FOR ELECTRONIC EQUIPMENT PART 4-111: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR TWO-PART POWER CONNECTOR MODULES, FOR PRINTED BOARDS AND BACKPLANES HAVING EARLY MATING FEATURES, AND HAVING A BASIC GRID OF 2,5 MM IN ACCORDANCE WITH IEC 60917-1 |
I.S. EN 61076-3-116:2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-116: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR PROTECTIVE HOUSINGS FOR USE WITH 8-WAY SHIELDED AND UNSHIELDED CONNECTORS FOR FREQUENCIES UP TO 600 MHZ FOR INDUSTRIAL ENVIRONMENTS INCORPORATING THE IEC 60603-7 SERIES INTERFACE - VARIANT 13 RELATED TO IEC 61076-3-106 - LOCKING LEVER |
I.S. EN 61076-2-001:2011 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-001: CIRCULAR CONNECTORS - BLANK DETAIL SPECIFICATION |
CEI EN 61076-3-106 : 2007 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-106: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR PROTECTIVE HOUSINGS FOR USE WITH 8-WAY SHIELDED AND UNSHIELDED CONNECTORS FOR INDUSTRIAL ENVIRONMENTS INCORPORATING THE IEC 60603-7 SERIES INTERFACE |
CEI EN 60512-29-100 : 2016 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 29-100: SIGNAL INTEGRITY TESTS UP TO 500 MHZ ON M12 STYLE CONNECTORS - TESTS 29A TO 29G |
NF EN 61076-2-113 : 2017 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-113: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CONNECTORS WITH M12 SCREW LOCKING WITH POWER AND SIGNAL CONTACTS FOR DATA TRANSMISSION WITH FREQUENCY UP TO 100 MHZ |
I.S. EN 61076-4-103:1999 | CONNECTORS FOR USE IN D.C. LOW-FREQUENCY ANALOGUE AND DIGITAL HIGH SPEED DATA APPLICATIONS - PART 4-103: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR TWO-PART CONNECTORS WITH SHIELDING AND A BASIC GRID OF 2.5 MM |
IEC PAS 61076-3-117:2006 | Connectors for electronic equipment - Product requirements - Part 3-117: Rectangular connectors - Protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating IEC 60603-7 - Variant 14 related to IEC 61076-3-106 - Push-pull coupling |
IEC 61076-3-103:2003 | Connectors for electronic equipment - Part 3-103: Rectangular connectors - Detail specification for single row connectors with non-removable ribbon cable contacts on 1,25 mm pitch used for high speed serial data (HSSDC) |
IEC 61076-4-111:2002 | Connectors for electronic equipment - Part 4-111: Printed board connectors with assessed quality - Detail specification for two-part power connector modules, for printed boards and backplanes having early mating features, and having a basic grid of 2,5 mm in accordance with IEC 60917-1 |
IEC 61076-2-105:2008 | Connectors for electronic equipment - Product requirements - Part 2-105: Circular connectors - Detail specification for M5 connectors with screw-locking |
EN 175301-801:2006 | Detail Specification: High density rectangular connectors, round removable crimp contacts |
EN 62197-1 : 2006 | CONNECTORS FOR ELECTRONIC EQUIPMENT - QUALITY ASSESSMENT REQUIREMENTS - PART 1: GENERIC SPECIFICATION |
EN 61076-7-100 : 2006 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 7-100: CABLE OUTLET ACCESSORIES - DETAIL SPECIFICATION FOR A METRIC CABLE SEALING CONSISTING OF AN INTEGRATED PART OF HEAVY-DUTY RECTANGULAR OR CIRCULAR CONNECTOR HOODS AND A SEALING SYSTEM |
EN 61076-4-108:2002 | Connectors for electronic equipment - Part 4-108: Printed board connectors with assessed quality - Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing density of 15 mm, having a basic grid of 2,5 mm in accordance with IEC 60917-1 |
EN 61076-4-101:2001 | Connectors for electronic equipment - Part 4-101: Printed board connectors with assessed quality - Detail specification for two-part connector modules, having a basic grid of 2,0 mm for printed boards and backplanes in accordance with IEC 60917 |
EN 60603-7-5:2010 | Connectors for electronic equipment - Part 7-5: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz |
EN 61076-3-114 : 2009 | Connectors for electronic equipment - Product requirements - Part 3-114: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 11 related to IEC 61076-3-106 - Bayonet coupling type |
EN 61076-3-116 : 2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-116: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR PROTECTIVE HOUSINGS FOR USE WITH 8-WAY SHIELDED AND UNSHIELDED CONNECTORS FOR FREQUENCIES UP TO 600 MHZ FOR INDUSTRIAL ENVIRONMENTS INCORPORATING THE IEC 60603-7 SERIES INTERFACE - VARIANT 13 RELATED TO IEC 61076-3-106 - LOCKING LEVER |
EN 61076-4-105:1998 | Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high-speed data applications - Part 4: Printed board connectors - Section 105: Detail specification for 9 mm circular connector with 3 to 8 contacts for use in a wide range of applications including the telecommunication and audio industry |
EN 61076-2:2011 | Connectors for electronic equipment - Product requirements - Part 2: Sectional specification for circular connectors |
EN 61076-4-114:2003 | Connectors for electronic equipment - Part 4-114: Printed board connectors - Detail specification for two-part connector with integrated shielding function having a grid of 1 mm x 1,5 mm |
EN 61076-7-001:2004 | Connectors for electronic equipment - Part 7-001: Cable outlet accessories - Blank detail specification |
EN 61076-2-106:2011 | Connectors for electronic equipment - Product requirements - Part 2-106: Circular connectors - Detail specification for connectors M 16 x 0,75 with screw-locking and degree of protection IP40 or IP65/67 |
EN 61076-4-103:1999 | Connectors for use in d.c. low-frequency analogue and digital high speed data applications - Part 4-103: Printed board connectors with assessed quality - Detail specification for two-part connectors with shielding and a basic grid of 2,5 mm |
EN 61076-4-102:1997 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Part 4: Printed board connectors - Section 102: Detail specification for two-part single-pole connectors, for multiple uses on plug-in units, with pre-centring, coding and early mating features, having a metric grid in accordance with IEC 60917 |
EN 61076-3-101:1997 | Connectors with assessed quality, for use in d.c. low-frequency analogue and in digital high-speed data applications - Part 3: Rectangular connectors - Section 101: Detail specification for a range of shielded connectors with trapezoidal shaped shells and non-removable rectangular contacts on a 1,27 mm x 2,54 mm centre-line |
EN 61076-2-104:2014 | Connectors for electronic equipment - Product requirements - Part 2-104: Circular connectors - Detail specification for circular connectors with M8 screw-locking or snap-locking |
EN 60512-27-100:2012 | Connectors for electronic equipment - Tests and measurements - Part 27-100: Signal integrity tests up to 500 MHz on IEC 60603-7 series connectors - Tests 27a to 27g |
EN 60512-29-100 : 2015 | Connectors for electronic equipment - Tests and measurements - Part 29-100: Signal integrity tests up to 500 MHz on M12 style connectors - Tests 29a to 29g |
EN 61076-4-113:2003 | Connectors for electronic equipment - Printed board connectors - Part 4-113: Detail specification for two-part connectors having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications |
EN 61076-4-001:1996 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 4: Printed board connectors - Section 001: Blank detail specification |
EN 61076-2-103:2004 | Connectors for electronic equipment - Part 2-103: Circular connectors - Detail specification for a range of multipole connectors (type 'XLR') |
EN 61076-4-110:2002 | Connectors for electronic equipment - Part 4-110: Printed board connectors with assessed quality - Detail specification for latched cable connector system having a basic grid of 2,0 mm including full shielding and latching function |
12/30264867 DC : 0 | BS EN 61076-2-104 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-104: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CIRCULAR CONNECTORS WITH M8 SCREW-LOCKING OR SNAP-LOCKING |
DD IEC/PAS 61076-2-110:2010 | Connectors for electronic equipment. Product requirements Circular connectors. Detail specification for circular connectors M 12 x 1 with screw-locking, for high speed Ethernet and high speed data communication with frequencies up to 500 MHz and 10 gigabits/s |
BS EN 61076-3-122:2017 | Connectors for electrical and electronic equipment. Product requirements Detail specification for 8-way, shielded, free and fixed connectors for I/O and Gigabit Ethernet applications in harsh environments |
BS EN 61076-2-106:2011 | Connectors for electronic equipment. Product requirements Circular connectors. Detail specification for connectors M 16 x 0,75 with screw-locking and degree of protection IP40 or IP65/67 |
BS EN 61076-2-107:2010 | Connectors for electronic equipment. Product requirements Detail specification for circular hybrid connectors M12 with electrical and fibre-optic contacts with screw locking |
BS EN 61076-4-111:2002 | Connectors for electronic equipment. Printed board connectors with assessed quality Detail specification for two-part power connector modules, for printed boards and backplanes having early mating features, and having a basic grid of 2,5 mm in accordance with IEC 60917-1 |
BS EN 61076-4-102:1997 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors Detail specification for two-part single-pole connectors, for multiple uses on plug-in units, with pre-centring, coding and early mating features, having a metric grid in accordance with IEC 60917 |
BS EN 61076-4:1997 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications Sectional specification. Printed board connectors |
I.S. EN 61076-4:1998 | CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C., LOW FREQUENCY ANALOGUE AND IN DIGITAL HIGH-SPEED DATA APPLICATIONS - PART 4: SECTIONAL SPECIFICATION - PRINTED BOARD CONNECTORS |
CEI EN 61076-4-100 : 2003 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 4-100: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR TWO-PART CONNECTOR MODULES HAVING A GRID OF 2,5 MM FOR PRINTED BOARDS AND BACKPLANES |
15/30329729 DC : 0 | BS EN 61076-3-122 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-122: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS FOR I/O AND GIGABIT APPLICATIONS IN HARSH ENVIRONMENTS |
BS EN 61076-3-101 : 1998 | CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C., LOW-FREQUENCY ANALOGUE AND IN DIGITAL HIGH-SPEED DATA APPLICATIONS - PART 3: RECTANGULAR CONNECTORS - SECTION 101: DETAIL SPECIFICATION FOR A RANGE OF SHIELDED CONNECTORS WITH TRAPEZOIDAL SHAPED SHELLS AND NON-REMOVABLE RECTANGULAR CONTACTS ON A 1,27 MM X 2,54 MM CENTRE-LINE |
BS EN 61076-3-106:2006 | Connectors for electronic equipment. Product requirements Rectangular connectors. Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603-7 series interface |
17/30361901 DC : 0 | BS EN 61076-3-125 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - DETAIL SPECIFICATION FOR 2-WAY, SHIELDED AND UNSHIELDED, FREE AND FIXED CONNECTORS FOR DATA TRANSMISSION UP TO 600 MHZ WITH CURRENT CARRYING CAPACITY |
BS EN 61076-2-105:2008 | Connectors for electronic equipment. Product requirements Circular connectors. Detail specification for M5 connectors with screw-locking |
CEI EN 61076-4-110 : 2003 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 4-110: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR LATCHED CABLE CONNECTOR SYSTEM HAVING A BASIC GRID OF 2,0 MM INCLUDING FULL SHIELDING AND LATCHING FUNCTION |
DD IEC/PAS 61076-2-109:2010 | Connectors for electronic equipment. Product requirements Circular connectors. Detail specification for connectors M 12 × 1 with screw-locking, for data transmissions with frequencies up to 500 MHz |
DD IEC/PAS 61076-2-108:2009 | Connectors for electronic equipment. Product requirements Circular connectors. Detail specification for glass to metal seal style M12 connectors with screw-locking intended to mate with connectors conforming to IEC 61076-2-101 |
BS EN 61076-4-103:1999 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors Detail specification for two-part connectors with shielding and a basic grid of 2,5 mm - Cable to board connectors, shielded against EMC ,grid 2,5 mm,for high speed data rates,for use with printed boards |
BS EN 61076-7-100:2006 | Connectors for electronic equipment. Product requirements Cable outlet accessories. Detail specification for a metric cable sealing consisting of an integrated part of heavy-duty rectangular or circular connector hoods and a sealing system |
14/30298357 DC : 0 | BS EN 61076-3-110 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-110: DETAIL SPECIFICATION FOR FREE AND FIXED CONNECTORS FOR DATA TRANSMISSION WITH FREQUENCIES UP TO 3000 MHZ |
BS EN 61076-4-104:1999 | Connectors for electronic equipment. Printed board connectors with assessed quality Detail specification for two-part modular connectors, basic grid of 2,0 mm, with terminations on a multiple grid of 0,5 mm - Detail specification for two part modular connectors (with optional shielding plates) for printed boards and backplanes, basic grid 2,0 mm, with terminations on a multiple grid of 0,5 mm |
08/30189288 DC : DRAFT SEP 2008 | BS EN 61076-2-107 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-107: DETAIL SPECIFICATION FOR CIRCULAR HYBRID CONNECTORS M12 WITH ELECTRICAL AND FIBRE-OPTIC CONTACTS WITH SCREW LOCKING |
NF EN 61076 4 115 : 2003 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 4-115: PRINTED BOARD CONNECTORS - BACKPLANE CONNECTOR FOR INFINIBAND EQUIPMENT |
IEC PAS 61076-2-109:2010 | Connectors for electronic equipment - Product requirements - Part 2-109: Circular connectors - Detail specification for connectors M12 x 1 with screw-locking, for data transmissions with frequencies up to 500 MHz |
03/100167 DC : DRAFT JAN 2003 | IEC 60603-3-105 ED.1 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 3-105: DETAIL SPECIFICATION FOR 4 PAIR BALANCED, INDIVIDUALLY SHIELDED, FIXED AND FREE CONNECTORS WITH CHARACTERISTIC IMPEDENCE OF 100 OHMS, COVERING A FREQUENCY RANGE FROM DC TO 1500 MHZ |
CEI EN 61076-2-106 : 2012 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-106: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CONNECTORS M 16 X 0,75 WITH SCREW-LOCKING AND DEGREE OF PROTECTION IP40 OR IP65/67 |
04/30112325 DC : DRAFT APR 2004 | IEC 61076-3-104 ED.2 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 3-104: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR 8-WAY, SHIELDED FREE AND FIXED CONNECTORS FOR DATA TRANSMISSION WITH FREQUENCIES UP TO 1000 MHZ |
10/30216372 DC : 0 | BS EN 61076-2-101 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-101: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR M12 CONNECTORS WITH SCREW-LOCKING |
EN 61076-2-113:2017 | Connectors for electronic equipment - Product requirements - Part 2-113: Circular connectors - Detail specification for connectors with M12 screw locking with power and signal contacts for data transmission with frequency up to 100 MHz |
CEI EN 61076-3-120 : 1ED 2017 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-120: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR REWIRABLE POWER CONNECTORS WITH SNAP LOCKING FOR RATED VOLTAGE OF 250 V D.C. AND RATED CURRENT OF 30 A |
CEI EN 61076-3-112 : 2007 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 3-112: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR RECTANGULAR CONNECTORS WITH FOUR CONTACTS FOR HIGH PERFORMANCE SERIAL BUS FOR CONSUMER AUDIO/VIDEO EQUIPMENT |
BS EN 61076-3-103:2004 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Rectangular connectors Detail specification for single row connectors with non-removable ribbon cable contacts on 1,25 mm pitch used for high speed serial data (HSSDC) |
CEI EN 61076-4-115 : 2004 | CONNECTORS FOR ELECTRONIC EQUIPMENT PART 4-115: PRINTED BOARD CONNECTORS BACKPLANE CONNECTOR FOR INFINIBAND EQUIPMENT |
BS EN 61076-3-116:2008 | Connectors for electronic equipment. Product requirements Rectangular connectors. Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface. Variant 13 related to IEC 61076-3-106. Locking lever |
I.S. EN 60512-29-100:2015 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 29-100: SIGNAL INTEGRITY TESTS UP TO 500 MHZ ON M12 STYLE CONNECTORS - TESTS 29A TO 29G |
I.S. EN 60512-28-100:2013 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 28-100: SIGNAL INTEGRITY TESTS UP TO 1000 MHZ ON IEC 60603-7 AND IEC 61076-3 SERIES CONNECTORS - TESTS 28A TO 28G (IEC 60512-28-100:2013(EQV)) |
I.S. EN 61076-3-115:2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-115: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR PROTECTIVE HOUSINGS FOR USE WITH 8-WAY SHIELDED AND UNSHIELDED CONNECTORS FOR FREQUENCIES UP TO 600 MHZ FOR INDUSTRIAL ENVIRONMENTS INCORPORATING THE IEC 60603-7 SERIES INTERFACE - VARIANT 12 RELATED TO IEC 61076-3-106 - PUSH-PULL TYPE |
I.S. EN 60512-27-100:2012 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 27-100: SIGNAL INTEGRITY TESTS UP TO 500 MHZ ON IEC 60603-7 SERIES CONNECTORS - TESTS 27A TO 27G (IEC 60512-27-100:2011 (EQV)) |
I.S. EN 61076-3-001:2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-001: RECTANGULAR CONNECTORS - BLANK DETAIL SPECIFICATION |
I.S. EN 61076-3-112:2006 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 3-112: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR RECTANGULAR CONNECTORS WITH FOUR CONTACTS FOR HIGH PERFORMANCE SERIAL BUS FOR CONSUMER AUDIO/VIDEO EQUIPMENT |
I.S. EN 61076-3-106:2006 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-106: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR PROTECTIVE HOUSINGS FOR USE WITH 8-WAY SHIELDED AND UNSHIELDED CONNECTORS FOR INDUSTRIAL ENVIRONMENTS INCORPORATING THE IEC 60603-7 SERIES INTERFACE |
I.S. EN 61076-2:2011 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2: SECTIONAL SPECIFICATION FOR CIRCULAR CONNECTORS |
BS EN 60603-7 : 2009 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7: DETAIL SPECIFICATION FOR 8-WAY, UNSHIELDED, FREE AND FIXED CONNECTORS |
CEI EN 61076-3-001 : 2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-001: RECTANGULAR CONNECTORS - BLANK DETAIL SPECIFICATION |
I.S. EN 61076-2-105:2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-105: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR M5 CONNECTORS WITH SCREW-LOCKING |
NF EN 61076 4 113 : 2005 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRINTED BOARD CONNECTORS - PART 4-113: DETAIL SPECIFICATION FOR TWO-PART CONNECTORS HAVING 5 ROWS WITH A GRID OF 2,54 MM FOR PRINTED BOARDS AND BACKPLANES IN BUS APPLICATIONS |
NF EN 61076-2-105 : 2009 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-105: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR M5 CONNECTORS WITH SCREW-LOCKING |
IEC 62946-01:2018 | Connectors for electrical and electronic equipment - Part 01: Rectangular connectors - Detail specification for 8-way, shielded, free and fixed high density connectors for data transmission with frequencies up to 100 MHz and with current carring capacity up to 1A |
IEC PAS 61076-3-126:2018 | Connectors for electrical and electronic equipment - Product requirements - Part 3-126: Rectangular connectors - Detail specification for 5 pole power connector for industrial environments with push-pull locking |
IEC PAS 61076-3-110:2002 | Connectors for electronic equipment - Part 3-110: Detail specification for 8 way connectors for frequencies up to 600 MHz |
IEC 60512-29-100:2015 | Connectors for electronic equipment - Tests and measurements - Part 29-100: Signal integrity tests up to 500 MHz on M12 style connectors - Tests 29a to 29g |
IEC 61076-6:2004 | Connectors for electronic equipment - Part 6: Loose part contacts - Sectional specification |
EN 60603-7:2009/A1:2011 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7: DETAIL SPECIFICATION FOR 8-WAY, UNSHIELDED, FREE AND FIXED CONNECTORS (IEC 60603-7:2008/A1:2011) |
11/30244521 DC : 0 | BS EN 61076-3-100 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-110: DETAIL SPECIFICATION FOR SHIELDED, FREE AND FIXED CONNECTORS FOR DATA TRANSMISSION WITH FREQUENCIES UP TO 1000 MHZ |
NF EN 61076 3 001 : 2009 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-001: RECTANGULAR CONNECTORS - BLANK DETAIL SPECIFICATION |
I.S. EN 61076-2-106:2011 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-106: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CONNECTORS M 16 X 0,75 WITH SCREW-LOCKING AND DEGREE OF PROTECTION IP40 OR IP65/67 |
I.S. EN 61076-3-118:2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-118: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR A 4 POLE + PE POWER CONNECTOR WITH PUSH-PULL COUPLING |
BS EN 61076-3-110:2016 | Connectors for electronic equipment. Product requirements Detail specification for free and fixed connectors for data transmission with frequencies up to 3 000 MHz |
EN 61076-3-122:2017 | Connectors for electrical and electronic equipment - Product requirements - Part 3-122: Detail specification for 8-way, shielded, free and fixed connectors for I/O and Gigabit Ethernet applications in harsh environments |
CEI EN 61076-2-107 : 2011 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-107: DETAIL SPECIFICATION FOR CIRCULAR HYBRID CONNECTORS M12 WITH ELECTRICAL AND FIBRE-OPTIC CONTACTS WITH SCREW LOCKING |
BS EN 61076-2-001:2011 | Connectors for electronic equipment. Product requirements Circular connectors. Blank detail specification |
CEI EN 61076-3-118 : 2011 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-118: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR A 4 POLE + PE POWER CONNECTOR WITH PUSH-PULL COUPLING |
NF EN 61076-3-120 : 2017 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-120: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR REWIRABLE POWER CONNECTORS WITH SNAP LOCKING FOR RATED VOLTAGE OF 250 V D.C. AND RATED CURRENT OF 30 A |
BS EN 61076-4-110:2002 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors Detail specification for latched cable connector system having a basic grid of 2,0 mm including full shielding and latching function |
CEI EN 62197-1 : 2007 | CONNECTORS FOR ELECTRONIC EQUIPMENT - QUALITY ASSESSMENT REQUIREMENTS - PART 1: GENERIC SPECIFICATION |
BS IEC 60512-29-100 : 2015 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 29-100: SIGNAL INTEGRITY TESTS UP TO 500 MHZ ON M12 STYLE CONNECTORS - TESTS 29A TO 29G |
NF EN 61076-3-117 : 2009 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-117: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR PROTECTIVE HOUSINGS FOR USE WITH 8-WAY SHIELDED AND UNSHIELDED CONNECTORS FOR INDUSTRIAL ENVIRONMENTS INCORPORATING THE IEC 60603-7 SERIES INTERFACE - VARIANT 14 RELATED TO IEC 61076-3-106 - PUSH PULL COUPLING |
BS EN 61076-7-001:2004 | Connectors for electronic equipment Cable outlet accessories - Blank detail specification |
I.S. EN 61076-3-103:2004 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 3-103: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR SINGLE ROW CONNECTORS WITH NON-REMOVABLE RIBBON CABLE CONTACTS ON 1,25 MM PITCH USED FOR HIGH SPEED SERIAL DATA (HSSDC) |
CEI EN 61076-4 : 1997 | CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C., LOW FREQUENCY ANALOGUE AND IN DIGITAL HIGH-SPEED DATA APPLICATIONS - PART 4: SECTIONAL SPECIFICATION PRINTED BOARD CONNECTORS |
CEI EN 61076-4-114 : 2004 | CONNECTORS FOR ELECTRONIC EQUIPMENT PART 4-114: PRINTED BOARD CONNECTORS - DETAIL SPECIFICATION FOR TWO-PART CONNECTOR WITH INTEGRATED SHIELDING FUNCTION HAVING A GRID OF 1 MM X 1,5 MM |
BS EN 61076-3:2008 | Connectors for electronic equipment. Product requirements Rectangular connectors. Sectional specification |
BS EN 61076-3-118:2010 | Connectors for electronic equipment. Product requirements Rectangular connectors. Detail specification for a 4 pole + PE power connector with push-pull coupling |
BS EN 61076-2:2011 | Connectors for electronic equipment. Product requirements Sectional specification for circular connectors |
03/100168 DC : DRAFT JAN 2003 | IEC 61076-3-112 ED.1.0 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 3-112: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION - RECTANGULAR CONNECTORS WITH FOUR CONTACTS FOR HIGH PERFORMANCE SERIAL BUS FOR CONSUMER AUDIO/VIDEO EQUIPMENT |
17/30352644 DC : 0 | BS IEC 61076-2-010 ED1.0 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-010: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR PUSH PULL CONNECTORS BASED ON M12 CONNECTOR INTERFACES ACCORDING TO IEC 61076-2-1XX |
BS EN 61076-3-114:2009 | Connectors for electronic equipment. Product requirements Rectangular connectors. Detail specification for.protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface. Variant 11 related to IEC 61076-3-106. Bayonet coupling type |
I.S. EN 61076-2-102:2002 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 2-102: CIRCULAR CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR PLUGS AND JACKS FOR EXTERNAL LOW VOLTAGE POWER SUPPLY |
CEI EN 61076-4-108 : 2003 | CONNECTORS FOR ELECTRONIC EQUIPMENT PART 4-108: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY DETAIL SPECIFICATION FOR CABLE-TO-BOARD CONNECTORS, WITH A MODULAR PITCH OF 25 MM AND INTEGRATED SHIELDING FUNCTION, APPLICABLE FOR TRANSVERSE PACKING DENSITY OF 15 MM, HAVING A BASIC GRID OF 2,5 MM IN ACCORDANCE WITH IEC 60917-1 |
I.S. EN 61076-7-001:2004 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-001: CABLE OUTLET ACCESSORIES - BLANK DETAIL SPECIFICATION |
BS EN 61076-4-113:2003 | Connectors for electronic equipment Printed board connectors with assessed quality Detail specification for two-part connectors having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications |
03/100530 DC : DRAFT JUNE 2003 | IEC 61076-3 ED 2 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 3: RECTANGULAR CONNECTORS - SECTIONAL SPECIFICATION |
CEI EN 61076-3-115 : 2012 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-115: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR PROTECTIVE HOUSINGS FOR USE WITH 8-WAY SHIELDED AND UNSHIELDED CONNECTORS FOR FREQUENCIES UP TO 600 MHZ FOR INDUSTRIAL ENVIRONMENTS INCORPORATING THE IEC 60603-7 SERIES INTERFACE - VARIANT 12 RELATED TO IEC 61076-3-106 - PUSH-PULL TYPE |
I.S. EN 61076-4-111:2002 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRINTED BOARD CONNECTORS WITH ASSESSED QUALIFY - DETAIL SPECIFICATION FOR TWO-PART POWER CONNECTOR MODULES, FOR PRINTED BOARDS AND BACKPLANES HAVING EARLY MATING FEATURES, AND HAVING A BASIC GRID OF 2,5 MM IN ACCORDANCE WITH IEC 60917-1 |
BS EN 175301-801:2006 | Detail specification. High density rectangular connectors, round removable crimp contacts |
15/30332712 DC : 0 | BS EN 61076-3-123 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-123: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR HYBRID CONNECTORS FOR INDUSTRIAL ENVIRONMENTS, FOR POWER SUPPLY AND FIBRE OPTIC DATA TRANSMISSION, WITH PUSH-PULL LOCKING |
BS EN 61076-3-120:2016 | Connectors for electronic equipment. Product requirements Rectangular connectors. Detail specification for rewirable power connectors with snap locking for rated voltage of 250 V d.c. and rated current of 30 A |
15/30319425 DC : 0 | BS EN 61076-3-121 - ELECTRICAL CONNECTORS - PART 3-121: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR 8-WAY, UNSHIELDED, FREE AND FIXED HIGH DENSITY CONNECTORS FOR DATA TRANSFER AND WITH POWER OVER ETHERNET CAPABILITIES |
BS EN 61076-2-109:2014 | Connectors for electronic equipment. Product requirements Circular connectors. Detail specification for connectors with M 12 × 1 screw-locking, for data transmission frequencies up to 500 MHz |
BS EN 61076-4-105:1998 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors Detail specification for 9 mm circular connector with 3 to 8 contacts for use in a wide range of applications including the telecommunication and audio industry |
98/230855 DC : DRAFT APRIL 1998 | IEC 61076-4-112 - CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C, LOW-FREQUENCY ANALOGUE AND IN DIGITAL HIGH-SPEED DATA APPLICATIONS - PART 4: PRINTED BOARD CONNECTORS - SECTION 112 - DETAIL SPECIFICATION FOR TWO-PART CONNECTORS FOR PRINTED BOARDS FOR BASIC GRID OF 2,00 MM, WITH SQUARE MALE CONTACTS OF 0,50 X 0,50 MM |
NF EN 60603-7-3 : DEC 2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-3: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS, FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 100 MHZ |
IEC PAS 61076-3-104:2002 | Connectors for electronic equipment - Part 3-104: Detail specification for 8-way, shielded free and fixed connectors, for data transmissions with frequencies up to 600 MHz minimum |
EN IEC 61076-2-111:2018 | Connectors for electrical and electronic equipment - Product requirements - Part 2-111: Circular connectors - Detail specification for power connectors with M12 screw-locking |
NF EN 61076 4 001 : 1997 | CONNECTORS WITH ASSESSED QUALITY, FOR USED IN D.C., LOW-FREQUENCY ANALOGUE AND IN DIGITAL HIGH-SPEED DATA APPLICATIONS - PRINTED BOARD CONNECTORS - BLANK DETAIL SPECIFICATION |
NF EN 61076 4 101 : 2002 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 4-101: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR TWO-PART CONNECTOR MODULES, HAVING A BASIC GRID OF 2,0 MM FOR PRINTED BOARDS AND BLACKPLANES IN ACCORDANCE WITH IEC 60917 |
IEC 61076-4-001:1996 | Connectors with assessed quality, for use in d.c., low-frequencyanalogue and in digital high-speed data applications - Part 4:Printed board connectors - Section 001: Blank detail specification |
CEI EN 61076-2-001 : 2012 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-001: CIRCULAR CONNECTORS - BLANK DETAIL SPECIFICATION |
CEI EN 61076-2 : 2012 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2: SECTIONAL SPECIFICATION FOR CIRCULAR CONNECTORS |
BS EN 61076-2-101:2012 | Connectors for electronic equipment. Product requirements Circular connectors. Detail specification for M12 connectors with screw-locking |
I.S. EN 61076-2-109:2014 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-109: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CONNECTORS WITH M 12 X 1 SCREW-LOCKING, FOR DATA TRANSMISSION FREQUENCIES UP TO 500 MHZ |
I.S. EN 61076-4-102:1998 | CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C., LOW-FREQUENCY ANALOGUE AND IN DIGITAL HIGH SPEED DATA APPLICATIONS - PART 4: PRINTED BOARD CONNECTORS - SECTION 102: DETAIL SPECIFICATION FOR TWO-PART SINGLE-POLE CONNECTORS, FOR MULTIPLE USES ON PLUG-IN UNITS, WITH PRE-CENTRING, CODING AND EARLY MATING FEATURES, HAVING A METRIC GRID IN ACCORDANCE WITH IEC 60917 |
I.S. EN 175301-801:2006 | DETAIL SPECIFICATION: HIGH DENSITY RECTANGULAR CONNECTORS, ROUND REMOVABLE CRIMP CONTACTS |
CEI EN 61076-6 : 2004 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 6: LOOSE PART CONTACTS - SECTIONAL SPECIFICATION |
CEI EN 61076-4-001 : 1997 | CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C., LOW-FREQUENCY ANALOGUE AND IN DIGITAL HIGH SPEED DATA APPLICATIONS - PART 4: PRINTED BOARD CONNECTORS - SECTION 001: BLANK DETAIL SPECIFICATION |
CEI EN 61076-2-105 : 2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-105: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR M5 CONNECTORS WITH SCREW-LOCKING |
NF EN 61076-3-116 : 2009 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-116: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR PROTECTIVE HOUSINGS FOR USE WITH 8-WAY SHIELDED AND UNSHIELDED CONNECTORS FOR FREQUENCIES UP TO 600 MHZ FOR INDUSTRIAL ENVIRONMENTS INCORPORATING THE IEC 60603-7 SERIES INTERFACE - VARIANT 13 RELATED TO IEC 61076-3-106 - LOCKING LEVER |
NF EN 61076 3 101 : 1998 | CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C. LOW-FREQUENCY ANALOGUE AND IN DIGITAL HIGH-SPEED DATA APPLICATIONS - PART 3: RECTANGULAR CONNECTORS - SECTION 101: DETAIL SPECIFICATION FOR A RANGE OF SHIELDED CONNECTORS WITH TRAPEZOIDAL SHAPED SHELLS AND NON-REMOVABLE RECTANGULAR CONTACTS ON A 1,27 MM X 2,54 MM CENTER-LINE |
I.S. EN 61076-3-104:2017 | CONNECTORS FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-104: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED FREE AND FIXED CONNECTORS FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 2000 MHZ |
EN 60512-28-100:2013 | Connectors for electronic equipment - Tests and measurements - Part 28-100: Signal integrity tests up to 1 000 MHz on IEC 60603-7 and IEC 61076-3 series connectors - Tests 28a to 28g |
EN 175101-809:2004/corrigendum Jun. 2005 | DETAIL SPECIFICATION: TWO-PART CONNECTORS FOR PRINTED BOARDS HAVING A GRID OF 2,54 MM, SHORT VERSION IN COMPLIANCE WITH CECC 75 101-801, WITH ASSESSED QUALITY |
IEC 61076-4-113:2002 | Connectors for electronic equipment - Printed board connectors - Part 4-113: Detail specification for two-part connectors having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications |
IEC 60603-7:2008+AMD1:2011 CSV | Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors |
EN 61076-4:1996 | Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high-speed data applications - Part 4: Sectional specification - Printed board connectors |
CEI EN 61076-4-103 : 2001 | CONNECTORS FOR USE IN D.C. LOW - FREQUENCY ANALOGUE AND DIGITAL HIGH SPEED DATA APPLICATIONS PART 4-103: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY DETAIL SPECIFICATION FOR TWO-PART CONNECTORS WITH SHIELDING AND A BASIC GRID OF 2,5 MM |
CEI EN 61076-2-113 : 1ED 2017 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-113: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CONNECTORS WITH M12 SCREW LOCKING WITH POWER AND SIGNAL CONTACTS FOR DATA TRANSMISSION WITH FREQUENCY UP TO 100 MHZ |
14/30311585 DC : 0 | BS EN 61076-3-120 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-120: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR REWIRABLE POWER CONNECTOR WITH SNAP LOCKING FOR 250 V D.C. AND RATED CURRENT OF 30A |
CEI EN 60512-27-100 : 2012 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 27-100: SIGNAL INTEGRITY TESTS UP TO 500 MHZ ON IEC 60603-7 SERIES CONNECTORS - TESTS 27A TO 27G |
BS EN 175301-803:2006 | Detail specification: rectangular connectors. Flat contacts, 0,8 mm thickness, locking screw not detachable |
NF EN 60603-7 : 2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7: DETAIL SPECIFICATION FOR 8-WAY, UNSHIELDED, FREE AND FIXED CONNECTORS |
ISO/IEC 14763-4:2018 | Information technology Implementation and operation of customer premises cabling Part 4: Measurement of end-to-end (E2E)-Links |
NF EN 61076-2-104 : 2015 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-104: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CIRCULAR CONNECTORS WITH M8 SCREW-LOCKING OR SNAP-LOCKING |
NF EN 61076 4 107 : 2002 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 4-107: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR SHIELDED TWO-PART CONNECTORS HAVING A BASIC GRID OF 2,0 MM, FIXED PART WITH SOLDER AND PRESS-IN TERMINATIONS FOR PRINTED BOARDS, FREE PART WITH NON-ACCESSIBLE INSULATION DISPLACEMENT AND CRIMP TERMINATIONS |
03/100166 DC : DRAFT JAN 2003 | IEC 60603-7-5 ED.1.0 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-5: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS, FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 250 MHZ |
PD IEC/PAS 61076-3-122:2015 | Connectors for electronic equipment. Product requirements Detail specification for rugged 8-way, shielded, free and fixed connectors |
IEC 61076-2-113:2017 | Connectors for electronic equipment - Product requirements - Part 2-113: Circular connectors - Detail specification for connectors with M12 screw locking with power and signal contacts for data transmission with frequency up to 100 MHz |
BS EN 61076-2-103:2004 | Connectors for electronic equipment Circular connectors - Detail specification for a range of multipole connectors (type 'XLR') |
CEI EN 61076-3-101 : 1998 | CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D/C/ LOW-FREQUENCY ANALOGUE AND IN DIGITAL HIGH-SPEED DATA APPLICATIONS - PART 3: RECTANGULAR CONNECTORS - SECTION 101: DETAIL SPECIFICATION FOR A RANGE OF SHIELDED CONNECTORS WITH TRAPEZOIDAL SHAPED SHELLS AND NON-REMOVABLE RECTANGULAR CONTACTS ON A 1,27 MM X 2,54 MM CENTRE-LINE |
DD IEC PAS 61076-2-107 : DRAFT 2007 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-107: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CIRCULAR HYBRID CONNECTORS M12 WITH ELECTRICAL AND FIBRE-OPTIC CONTACTS WITH SCREW-LOCKING |
CEI EN 60512-28-100 : 2014 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 28-100: SIGNAL INTEGRITY TESTS UP TO 1000 MHZ ON 60603-7 AND 61076-3 SERIES CONNECTORS - TESTS 28A TO 28G |
14/30297577 DC : 0 | BS EN 61076-2-113 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-113: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CONNECTORS WITH DATA AND POWER CONTACTS WITH M12 SCREW-LOCKING |
I.S. EN 61076-4-115:2003 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 4-115: PRINTED BOARD CONNECTORS - BACKPLANE CONNECTOR FOR INFINIBAND EQUIPMENT |
I.S. EN 61076-2-101:2012 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-101: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR M12 CONNECTORS WITH SCREW-LOCKING (IEC 61076-2-101:2012 (EQV)) |
13/30268325 DC : 0 | BS EN 61076-2-112 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 2-112: PRODUCT REQUIREMENTS - CIRCULAR CONNECTORS, DETAIL SPECIFICATION FOR M12 POWER CONNECTORS UP TO 12 AMPS WITH SCREW-LOCKING |
I.S. EN 61076-4-113:2003 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRINTED BOARD CONNECTORS - PART 4-113: DETAIL SPECIFICATION FOR TWO-PART CONNECTORS HAVING 5 ROWS WITH A GRID OF 2,54 MM FOR PRINTED BOARDS AND BACKPLANES IN BUS APPLICATIONS |
EN IEC 61076-3-119:2018 | Connectors for electrical and electronic equipment - Product requirements - Part 3-119: Rectangular connectors - Detail specification for shielded and unshielded, free and fixed 10-way connectors with push-pull coupling for industrial environments for data transmission with frequencies up to 100 MHz |
CEI EN 61076-3-122 : 1ED 2017 | CONNECTORS FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-122: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS FOR I/O AND GIGABIT ETHERNET APPLICATIONS IN HARSH ENVIRONMENTS |
08/30179153 DC : DRAFT MAR 2008 | BS EN 61076-3-118 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-118: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR A 4 POLES + PE POWER CONNECTOR WITH PUSH-PULL COUPLING |
NF EN 61076 2 102 : 2002 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 2-102: CIRCULAR CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR PLUGS AND JACKS FOR EXTERNAL LOW VOLTAGE POWER SUPPLY |
NF EN 60603-7-4 : 2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-4: DETAIL SPECIFICATION FOR 8-WAY, UNSHIELDED, FREE AND FIXED CONNECTORS, FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 250 MHZ |
NF EN 61076 4 105 : 1999 | CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C., LOW FREQUENCY ANALOGUE AND IN DIGITAL HIGH-SPEED DATA APPLICATIONS - PART 4: PRINTED BOARD CONNECTORS - SECTION 105: DETAIL SPECIFICATION FOR 9 MM CIRCULAR CONNECTOR WITH 3 TO 8 CONTACTS FOR USE IN A WIDE RANGE OF APPLICATIONS INCLUDING THE TELECOMMUNICATION AND AUDIO INDUSTRY |
IEC PAS 61076-3-114:2005 | Connectors for electronic equipment - Part 3-114: Rectangular connectors - Protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 11 related to IEC 61076-3-106 - Bayonet coupling type |
BS EN 61076-3-117:2009 | Connectors for electronic equipment. Product requirements Rectangular connectors. Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603-7 series interface. Variant 14 related to IEC 61076-3-106. Push-pull coupling |
BS EN 61076-4-108:2002 | Connectors for electronic equipment. Printed board connectors with assessed quality Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing density of 15 mm, having a basic grid of 2,5 mm in accordance with IEC 60917-1 |
BS EN 60603-7-5:2010 | Connectors for electronic equipment Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz |
03/100336 DC : DRAFT MAR 2003 | IEC 60603-7-7 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-7: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS FOR DATA TRANSMISSION WITH FREQUENCIES UP TO 600 MHZ |
03/100165 DC : DRAFT JAN 2003 | IEC 60603-7-2 ED.1.0 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-2: DETAIL SPECIFICATION FOR 8-WAY, UNSHIELDED, FREE AND FIXED CONNECTORS, FOR DATA TRANSMISSION WITH FREQUENCIES UP TO 100 MHZ |
I.S. EN 61076-3-122:2017 | CONNECTORS FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-122: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS FOR I/O AND GIGABIT ETHERNET APPLICATIONS IN HARSH ENVIRONMENTS |
I.S. EN 61076-4-001:1998 | CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C., LOW-FREQUENCY ANALOGUE AND IN DIGITAL HIGH SPEED DATA APPLICATIONS - PART 4: PRINTED BOARD CONNECTORS - SECTION 001: BLANK DETAIL SPECIFICATION |
CEI EN 61076-3 : 2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3: RECTANGULAR CONNECTORS - SECTIONAL SPECIFICATION |
I.S. EN 60603-7:2009 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7: DETAIL SPECIFICATION FOR 8-WAY, UNSHIELDED, FREE AND FIXED CONNECTORS (IEC 60603-7:2008) |
I.S. EN 61076-2-104:2014 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-104: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CIRCULAR CONNECTORS WITH M8 SCREW-LOCKING OR SNAP-LOCKING |
I.S. EN 61076-4-110:2002 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 4-110: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR LATCHED CABLE CONNECTOR SYSTEM HAVING A BASIC GRID OF 2,0 MM INCLUDING FULL SHIELDING AND LATCHING FUNCTION |
I.S. EN 61076-4-104:1999 | CONNECTORS FOR USE IN D.C. LOW-FREQUENCY ANALOGUE AND DIGITAL HIGH-SPEED DATA APPLICATIONS - PART 4-104: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR TWO-PART MODULAR CONNECTORS, BASIC GRID OF 2.0 MM WITH TERMINATIONS ON A MULTIPLE GRID OF 0.5 MM |
I.S. EN 61076-2-103:2004 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 2-103: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR A RANGE OF MULTIPOLE CONNECTORS (TYPE 'XLR') |
IEC PAS 61076-3-124:2016 | Connectors for electronic equipment - Product requirements - Part 2-124: Detail specification for 10-way, shielded, free and fixed connectors for I/O and Gigabit transmission capability for industrial applications |
IEC PAS 61076-2-107:2007 | Connectors for electronic equipment - Product requirements - Part 2-107: Circular connectors - Detail specification for circular hybrid connectors M12 with electrical and fibre-optic contacts with screw-locking |
IEC 61076-3-104:2017 | Connectors for electrical and electronic equipment - Product requirements - Part 3-104: Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 2 000 MHz |
I.S. EN 61076-3-110:2016 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-110: DETAIL SPECIFICATION FOR FREE AND FIXED CONNECTORS FOR DATA TRANSMISSION WITH FREQUENCIES UP TO 3000 MHZ |
IEC PAS 61076-3-115:2005 | Connectors for electronic equipment - Part 3-115: Rectangular connectors - Protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 12 related to IEC 61076-3-106 - Push-pull type |
IEC 61076-4-110:2001 | Connectors for electronic equipment - Part 4-110: Printed board connectors with assessed quality - Detail specification for latched cable connector system having a basic grid of 2,0 mm including full shielding and latching function |
IEC 61076-4-101:2001 | Connectors for electronic equipment - Part 4-101: Printed board connectors with assessed quality - Detail specification for two-part connector modules, having a basic grid of 2,0 mm for printed boards and backplanes in accordance with IEC 60917 |
IEC 61076-3-116:2008 | Connectors for electronic equipment - Product requirements - Part 3-116: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 13 related to IEC 61076-3-106 - Locking lever |
IEC 61076-3-101:1997 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 3: Rectangular connectors - Section 101: Detail specification for a range of shielded connectors with trapezoidal shaped shells and non-removable rectangular contacts on a 1,27 mm x 2,54 mm centre-line |
IEC 62197-1:2006 | Connectors for electronic equipment - Quality assessment requirements - Part 1: Generic specification |
IEC 61076-2-106:2011 | Connectors for electronic equipment - Product requirements - Part 2-106: Circular connectors - Detail specification for connectors M 16 x 0,75 with screw-locking and degree of protection IP40 or IP65/67 |
IEC 61076-4-100:2001 | Connectors for electronic equipment - Part 4-100: Printed board connectors with assessed quality - Detail specification for two-part connector modules having a grid of 2,5 mm for printed boards and backplanes |
IEC 61076-7-001:2004 | Connectors for electronic equipment - Part 7-001: Cable outlet accessories - Blank detail specification |
IEC 61076-4-115:2003 | Connectors for electronic equipment - Part 4-115: Printed board connectors - Backplane connector for InfiniBand equipment |
IEC 61076-2-107:2010 | Connectors for electronic equipment - Product requirements - Part 2-107: Detail specification for circular hybrid connectors M12 with electrical and fibre-optic contacts with screw locking |
IEC 61076-3-114:2009 | Connectors for electronic equipment - Product requirements - Part 3-114: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 11 related to IEC 61076-3-106 - Bayonet coupling type |
IEC 61076-3-100:1999 | Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 3-100: Rectangular connectors with assessed quality - Detail specification for a range of shielded connectors with trapezoidal-shaped shells and non-removable ribbon contacts on a 1,27 mm double row |
IEC 61076-3-106:2006 | Connectors for electronic equipment - Product requirements - Part 3-106: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603-7 series interface |
IEC 61076-2-109:2014 | Connectors for electronic equipment - Product requirements - Part 2-109: Circular connectors - Detail specification for connectors with M 12 x 1 screw-locking, for data transmission frequencies up to 500 MHz |
IEC 61076-4-108:2002 | Connectors for electronic equipment - Part 4-108: Printed board connectors with assessed quality - Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing density of 15 mm, having a basic grid of 2,5 mm in accordance with IEC 60917-1 |
IEC 61076-7-100:2006 | Connectors for electronic equipment - Product requirements - Part 7-100: Cable outlet accessories - Detail specification for a metric cable sealing consisting of an integrated part of heavy-duty rectangular or circular connector hoods and a sealing system |
IEC 61076-3-110:2016 | Connectors for electronic equipment - Product requirements - Part 3-110: Detail specification for free and fixed connectors for data transmission with frequencies up to 3 000 MHz |
IEC 61076-2-001:2011 | Connectors for electronic equipment - Product requirements - Part 2-001: Circular connectors - Blank detail specification |
IEC 61076-2-101:2012 | Connectors for electronic equipment - Product requirements - Part 2-101: Circular connectors - Detail specification for M12 connectors with screw-locking |
IEC 61076-3-118:2010 | Connectors for electronic equipment - Product requirements - Part 3-118: Rectangular connectors - Detail specification for a 4 pole plus PE power connector with push-pull coupling |
IEC 61076-2:2011 | Connectors for electronic equipment - Product requirements - Part 2: Sectional specification for circular connectors |
IEC 61076-2-104:2014 | Connectors for electronic equipment - Product requirements - Part 2-104: Circular connectors - Detail specification for circular connectors with M8 screw-locking or snap-locking |
IEC 61076-3-112:2006 | Connectors for electronic equipment - Part 3-112: Rectangular connectors - Detail specification for rectangular connectors with four contacts for high performance serial bus for consumer audio/ video equipment |
IEC 61076-4-114:2003 | Connectors for electronic equipment - Part 4-114: Printed board connectors - Detail specification for two-part connector with integrated shielding function having a grid of 1 mm x 1,5 mm |
IEC 61076-3-120:2016 | Connectors for electronic equipment - Product requirements - Part 3-120: Rectangular connectors - Detail specification for rewirable power connectors with snap locking for rated voltage of 250 V d.c. and rated current of 30 A |
IEC 61076-2-102:2002 | Connectors for electronic equipment - Part 2-102: Circular connectors with assessed quality - Detail specification for plugs and jacks for external low voltage power supply |
EN 175301-803:2006 | Detail Specification: Rectangular connectors - Flat contacts, 0,8 mm thickness, locking screw not detachable |
17/30340059 DC : 0 | BS EN 61076-3-119 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-119: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR UNSHIELDED, FREE AND FIXED 10 WAY CONNECTORS WITH PUSH-PULL COUPLING FOR INDUSTRIAL ENVIRONMENTS WITH FREQUENCIES UP TO 100 MHZ |
01/207165 DC : DRAFT OCT 2001 | IEC 61076-3-110 ED.1 - CONNECTORS FOR USE IN D.C., LOW FREQUENCY ANALOGUE AND IN DIGITAL HIGH SPEED APPLICATIONS - PART 3-110: DETAIL SPECIFICATION FOR 8 WAY CONNECTORS FOR FREQUENCIES UP TO 600 MHZ [CATEGORY 7 DETAIL SPECIFICATION] |
PD IEC/PAS 61076-2-114:2016 | Connectors for electronic equipment. Product requirements Circular connectors. Detail specification for data and power connectors with M8 screw-locking |
CEI EN 61076-2-101 : 2013 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-101: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR M12 CONNECTORS WITH SCREW-LOCKING |
17/30334978 DC : 0 | BS EN 62946-01 ED 1.0 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 01: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED HIGH DENSITY CONNECTORS FOR DATA TRANSMISSION WITH FREQUENCIES UP TO 100 MHZ AND WITH CURRENT CARRING CAPACITY UP TO 1A |
BS EN 60512-28-100:2013 | Connectors for electronic equipment. Tests and measurements Signal integrity tests up to 1000 MHz on IEC 60603-7 and IEC 61076-3 series connectors. Tests 28a to 28g |
I.S. EN 61076-4-114:2003 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 4-114: PRINTED BOARD CONNECTORS - DETAIL SPECIFICATION FOR TWO-PART CONNECTOR WITH INTEGRATED SHIELDING FUNCTION HAVING A GRID OF 1 MM X 1,5 MM |
NF EN 61076-2-107 : 2011 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-107: DETAIL SPECIFICATION FOR CIRCULAR HYBRID CONNECTORS M12 WITH ELECTRICAL AND FIBRE-OPTIC CONTACTS WITH SCREW LOCKING |
CEI EN 61076-3-117 : 2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-117: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR PROTECTIVE HOUSINGS FOR USE WITH 8-WAY SHIELDED AND UNSHIELDED CONNECTORS FOR INDUSTRIAL ENVIRONMENTS INCORPORATING THE IEC 60603-7 SERIES INTERFACE - VARIANT 14 RELATED TO IEC 61076-3-106 - PUSH PULL COUPLING |
CEI EN 61076-3-110 : 2013 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-110: DETAIL SPECIFICATION FOR FREE AND FIXED CONNECTORS FOR DATA TRANSMISSION WITH FREQUENCIES UP TO 3000 MHZ |
CEI EN 61076-4-104 : 2001 | CONNECTORS FOR USE IN D.C. LOW FREQUENCY ANALOGUE AND DIGITAL HIGH SPEED DATA APPLICATIONS PART 4-104: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY DETAIL SPECIFICATION FOR TWO-PART MODULAR CONNECTORS, BASIC GIRD OF 2,0 MMS WITH TERMINATIONS ON A MULTIPLE GIRD OF 0,5 MM |
10/30227785 DC : 0 | BS EN 61076-2-109 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-109: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CONNECTORS M 12 X 1 WITH SCREW-LOCKING, FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 500 MHZ |
BS EN 61076-4-107:2001 | Connectors for electronic equipment Printed board connectors with assessed quality. Detail specification for shielded two-part connectors having a basic grid of 2,0 mm, fixed part with solder and press-in terminations for printed boards, free part with non-accessible insulation displacement and crimp terminations |
09/30213890 DC : 0 | BS EN 61076-3-110 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 3-110: DETAIL SPECIFICATION FOR SHIELDED, FREE AND FIXED CONNECTORSFOR DATA TRANSMISSION WITH FREQUENCIES UP TO 1000 MHZ |
CEI EN 61076-4-102 : 1998 | CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C., LOW FREQUENCY ANALOGUE AND IN DIGITAL HIGH SPEED DATA APPLICATIONS - PART 4: PRINTED BOARD CONNECTORS SECTION 102: DETAIL SPECIFICATION FOR TWO-PART SINGLE-POLE CONNECTORS, FOR MULTIPLE USES ON PLUG-IN UNITS, WITH PRE-CENTRING, CODING AND EARLY MATING FEATURES, HAVING A METRIC GRID IN ACCORDANCE WITH IEC 60917 |
NF EN 61076 3 104 : 2013 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-104: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED FREE AND FIXED CONNECTORS FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 1000 MHZ |
BS EN 60917-2-2:1997 | Modular order for the development of mechanical structures for electronic equipment practices. Sectional specification. Interface co-ordination dimensions for the 25 mm equipment practice Detail specification. Dimensions for subracks, chassis, backplanes, front panels and plug-in units |
09/30199993 DC : 0 | BS EN 61076-2 ED.2 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2: CIRCULAR CONNECTORS - SECTIONAL SPECIFICATION |
I.S. EN 61076-7-100:2006 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 7-100: CABLE OUTLET ACCESSORIES - DETAIL SPECIFICATION FOR A METRIC CABLE SEALING CONSISTING OF AN INTEGRATED PART OF HEAVY-DUTY RECTANGULAR OR CIRCULAR CONNECTOR HOODS AND A SEALING SYSTEM |
BS EN 61076-2-113:2017 | Connectors for electronic equipment. Product requirements Circular connectors. Detail specification for connectors with M12 screw locking with power and signal contacts for data transmission with frequency up to 100 MHz |
BS EN 61076-2-104:2014 | Connectors for electronic equipment. Product requirements Circular connectors. Detail specification for circular connectors with M8 screw-locking or snap-locking |
CEI EN 175301-803 : 2007 | DETAIL SPECIFICATION: RECTANGULAR CONNECTORS - FLAT CONTACTS, 0,8 MM THICKNESS, LOCKING SCREW NOT DETACHABLE |
BS EN 175101-809:2004 | Harmonized system of quality assessment for electronic components. Detail specification Two-part connectors for printed boards having a grid of 2,54 mm, short version in compliance with CECC 75 101-801, with assessed quality |
BS EN 61076-3-104:2017 | Connectors for electrical and electronic equipment. Product requirements Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 2 000 MHz |
BS EN 62197-1:2006 | Connectors for electronic equipment. Quality assessment requirements Generic specification |
BS EN 61076-3-001:2000 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Rectangular connectors Blank detail specification |
09/30199997 DC : 0 | BS EN 61076-2-001 ED.2 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-001: CIRCULAR CONNECTORS - BLANK DETAIL SPECIFICATION |
I.S. EN 61076-4-101:2002 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 4-101: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR TWO-PART CONNECTOR MODULES, HAVING A BASIC GRID OF 2,0 MM FOR PRINTED BOARDS AND BACKPLANES IN ACCORDANCE WITH IEC 60917 |
BS EN 61076-4-100:2002 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors Detail specification for two-part connector modules having a grid of 2,5 mm for printed boards and backplanes |
BS EN 61076-4-114:2003 | Connectors for electronic equipment. Printed board connectors with assessed quality Detail specification for two-part connector with integrated shielding function having a grid of 1 mm x 1,5 mm |
I.S. EN 61076-3:2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3: RECTANGULAR CONNECTORS - SECTIONAL SPECIFICATION |
CEI EN 175301-801 : 2007 | DETAIL SPECIFICATION: HIGH DENSITY RECTANGULAR CONNECTORS, ROUND REMOVABLE CRIMP CONTACTS |
I.S. EN IEC 61076-3-119:2018 | CONNECTORS FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-119: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR SHIELDED AND UNSHIELDED, FREE AND FIXED 10-WAY CONNECTORS WITH PUSH-PULL COUPLING FOR INDUSTRIAL ENVIRONMENTS FOR DATA TRANSMISSION WITH FREQUENCIES UP TO 100 MHZ |
I.S. EN IEC 61076-2-111:2018 | CONNECTORS FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-111: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR POWER CONNECTORS WITH M12 SCREW-LOCKING |
I.S. EN 61076-2-113:2017 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-113: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CONNECTORS WITH M12 SCREW LOCKING WITH POWER AND SIGNAL CONTACTS FOR DATA TRANSMISSION WITH FREQUENCY UP TO 100 MHZ |
BS EN 61076-6:2004 | Connectors for electronic equipment Loose part contacts. Sectional specification |
NF EN 61076-3-115 : 2011 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-115: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION PROTECTIVE HOUSINGS FOR USE WITH 8-WAY SHIELDED AND UNSHIELDED CONNECTORS FOR FREQUENCIES UP TO 600 MHZ FOR INDUSTRIAL ENVIRONMENTS INCORPORATING THE IEC 60603-7 SERIES INTERFACE - VARIANT 12 RELATED TO IEC 61076-3-106 - PUSH-PULL TYPE |
NF EN 61076 2 101 : 2013 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-101: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR M12 CONNECTORS WITH SCREW-LOCKING |
CEI EN 61076-4-105 : 2001 | CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C., LOW FREQUENCY ANALOGUE AND IN DIGITAL HIGH-SPEED DATA APPLICATIONS - PRINTED BOARD CONNECTORS - DETAIL SPECIFICATION FOR 9 MM CIRCULAR CONNECTOR WITH 3 TO 8 CONTACTS FOR USE IN A WIDE RANGE OF APPLICATIONS INCLUDING THE TELECOMMUNICATION= AND AUDIO INDUSTRY |
NF EN 61076 4-114 : 2005 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 4-114: PRINTED BOARD CONNECTORS - DETAIL SPECIFICATION FOR TWO-PART CONNECTOR WITH INTEGRATED SHIELDING FUNCTION HAVING A GRID OF 1 MM X 1,5 MM |
I.S. EN 61076-3-114:2009 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-114: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR PROTECTIVE HOUSINGS FOR USE WITH 8-WAY SHIELDED AND UNSHIELDED CONNECTORS FOR FREQUENCIES UP TO 600 MHZ FOR INDUSTRIAL ENVIRONMENTS INCORPORATING THE IEC 60603-7 SERIES INTERFACE - VARIANT 11 RELATED TO IEC 61076-3-106 - BAYONET COUPLING TYPE |
I.S. EN 62197-1:2006 | CONNECTORS FOR ELECTRONIC EQUIPMENT - QUALITY ASSESSMENT REQUIREMENTS - PART 1: GENERIC SPECIFICATION |
I.S. EN 61076-4-108:2002 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 4-108: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR CABLE-TO-BOARD CONNECTORS, WITH A MODULAR PITCH OF 25 MM AND INTEGRATED SHIELDING FUNCTION, APPLICABLE FOR TRANSVERSE PACKING DENSITY OF 15 MM, HAVING A BASIC GRID OF 2,5 MM IN ACCORDANCE WITH IEC 60917-1 |
I.S. EN 175101-809:2004 | DETAIL SPECIFICATION - TWO-PART CONNECTORS FOR PRINTED BOARDS HAVING A GRID OF 2.54 MM, SHORT VERSION IN COMPLIANCE WITH CECC 75101-801, WITH ASSESSED QUALITY |
I.S. EN 61076-6:2004 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 6: LOOSE PART CONTACTS - SECTIONAL SPECIFICATION |
IEC TR 62225:2001 | Guidance on terms for connectors and mechanical structures in electronic equipment |
IEC PAS 61076-2-110:2010 | Connectors for electronic equipment - Product requirements - Part 2-110: Circular connectors - Detail specification for circular connectors M12 x 1 with screw-locking, for high speed Ethernet and high speed data communication with frequencies up to 500 MHz and 10 gigabits/s |
IEC PAS 61076-2-108:2009 | Connectors for electronic equipment - Product requirements - Part 2-108: Circular connectors - Detail specification for glass to metal seal style M12 connectors with screw-locking intended to mate with connectors conforming to IEC 61076-2-101 |
EN 61076-3-104:2017 | Connectors for electrical and electronic equipment - Product requirements - Part 3-104: Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 2 000 MHz |
IEC 61076-3:2008 | Connectors for electronic equipment - Product requirements - Part 3: Rectangular connectors - Sectional specification |
IEC 61076-3-001:2008 | Connectors for electronic equipment - Product requirements - Part 3-001: Rectangular connectors - Blank detail specification |
IEC 61076-3-117:2009 | Connectors for electronic equipment - Product requirements - Part 3-117: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603-7 series interface - Variant 14 related to IEC 61076-3-106 - Push-pull coupling |
IEC 61076-2-103:2004 | Connectors for electronic equipment - Part 2-103: Circular connectors - Detail specification for a range of multipole connectors (type 'XLR') |
IEC 61076-4-104:1999 | Connectors for use in d.c., low frequency analogue and digital high speed data applications - Part 4-104: Printed board connectors with assessed quality - Detail specification for two-part modular connectors, basic grid of 2,0 mm, with terminations on a multiple grid of 0,5 mm |
IEC 60512-27-100:2011 | Connectors for electronic equipment - Tests and measurements - Part 27-100: Signal integrity tests up to 500 MHz on 60603-7 series connectors - Tests 27a to 27g |
IEC 61076-3-115:2009 | Connectors for electronic equipment - Product requirements - Part 3-115: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 12 related to IEC 61076-3-106 - Push-pull type |
IEC 61076-4:1995 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 4: Sectional specification - Printed board connectors |
EN 61076-4-100:2001 | Connectors for electronic equipment - Part 4-100: Printed board connectors with assessed quality - Detail specification for two-part connector modules having a grid of 2,5 mm for printed boards and backplanes |
EN 61076-4-115:2003 | Connectors for electronic equipment - Part 4-115: Printed board connectors - Backplane connector for InfiniBand equipment |
EN 61076-2-101:2012 | Connectors for electronic equipment - Product requirements - Part 2-101: Circular connectors - Detail specification for M12 connectors with screw-locking |
EN 61076-3-115:2010 | Connectors for electronic equipment - Product requirements - Part 3-115: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 12 related to IEC 61076-3-106 - Push-pull type |
EN 61076-3-110:2016 | Connectors for electronic equipment - Product requirements - Part 3-110: Detail specification for free and fixed connectors for data transmission with frequencies up to 3 000 MHz |
EN 61076-2-109 : 2014 | Connectors for electronic equipment - Product requirements - Part 2-109: Circular connectors - Detail specification for connectors with M 12 × 1 screw-locking, for data transmission frequencies up to 500 MHz |
EN 61076-4-107:2001 | Connectors for electronic equipment - Part 4-107: Printed board connectors with assessed quality - Detail specification for shielded two-part connectors having a basic grid of 2,0 mm, fixed part with solder and press-in terminations for printed boards, free part with non-accessible insulation displacement and crimp terminations |
EN 61076-4-111:2002 | Connectors for electronic equipment - Part 4-111: Printed board connectors with assessed quality - Detail specification for two-part power connector modules, for printed boards and backplanes having early mating features, and having a basic grid of 2,5 mm in accordance with IEC 60917-1 |
EN 61076-3-001:2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-001: RECTANGULAR CONNECTORS - BLANK DETAIL SPECIFICATION |
EN 61076-3-100:2000 | Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 3-100: Rectangular connectors with assessed quality - Detail specification for a range of shielded connectors with trapezoidal-shaped shells and non-removable ribbon contacts on a 1,27 mm double row |
EN 61076-3:2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3: RECTANGULAR CONNECTORS - SECTIONAL SPECIFICATION |
EN 61076-3-112 : 2006 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 3-112: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR RECTANGULAR CONNECTORS WITH FOUR CONTACTS FOR HIGH PERFORMANCE SERIAL BUS FOR CONSUMER AUDIO/VIDEO EQUIPMENT |
EN 61076-3-117:2009 | Connectors for electronic equipment - Product requirements - Part 3-117: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603-7 series interface - Variant 14 related to IEC 61076-3-106 - Push pull coupling |
EN 61076-2-102:2002 | Connectors for electronic equipment - Part 2-102: Circular connectors with assessed quality - Detail specification for plugs and jacks for external low voltage power supply |
EN 61076-6 : 2004 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 6: LOOSE PART CONTACTS - SECTIONAL SPECIFICATION |
EN 61076-2-107 : 2010 | Connectors for electronic equipment - Product requirements - Part 2-107: Detail specification for circular hybrid connectors M12 with electrical and fibre-optic contacts with screw locking |
EN 61076-2-105:2008 | Connectors for electronic equipment - Product requirements - Part 2-105: Circular connectors - Detail specification for M5 connectors with screw-locking |
EN 61076-4-104:1999 | Connectors for use in d.c. low-frequency analogue and digital high speed data applications - Part 4-104: Printed board connectors with assessed quality - Detail specification for two-part modular connectors, basic grid of 2,0 mm, with terminations on a multiple grid of 0,5 mm |
EN 61076-3-106 : 2006 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-106: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR PROTECTIVE HOUSINGS FOR USE WITH 8-WAY SHIELDED AND UNSHIELDED CONNECTORS FOR INDUSTRIAL ENVIRONMENTS INCORPORATING THE IEC 60603-7 SERIES INTERFACE |
EN 61076-3-120 : 2016 | Connectors for electronic equipment - Product requirements - Part 3-120: Rectangular connectors - Detail specification for rewirable power connectors with snap locking for rated voltage of 250 V d.c. and rated current of 30 A |
EN 61076-3-103:2004 | Connectors for electronic equipment - Part 3-103: Rectangular connectors - Detail specification for single row connectors with non-removable ribbon cable contacts on 1,25 mm pitch used for high speed serial data (HSSDC) |
EN 61076-2-001:2011 | Connectors for electronic equipment - Product requirements - Part 2-001: Circular connectors - Blank detail specification |
EN 61076-3-118 : 2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-118: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR A 4 POLE + PE POWER CONNECTOR WITH PUSH-PULL COUPLING |
IEC GUIDE 109:2012 | Environmental aspects - Inclusion in electrotechnical product standards |
IEC 61076-3:2008 | Connectors for electronic equipment - Product requirements - Part 3: Rectangular connectors - Sectional specification |
IEC 60068-1:2013 | Environmental testing - Part 1: General and guidance |
ISO 1101:2017 | Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out |
IEC 61076-6:2004 | Connectors for electronic equipment - Part 6: Loose part contacts - Sectional specification |
IEC 61076-7:2000 | Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 7: Cable outlet accessories with assessed quality, including qualification and capability approval - Sectional specifiation |
ISO 1302:2002 | Geometrical Product Specifications (GPS) Indication of surface texture in technical product documentation |
IEC 61076-5:2001 | Connectors for use in d.c., low-frequency analogue and digital high-speed data applications - Part 5: In-line sockets with assessed quality - Sectional specification |
IEC 61076-4:1995 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 4: Sectional specification - Printed board connectors |
ISO 286-1:2010 | Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 1: Basis of tolerances, deviations and fits |
IEC 61076-2:2011 | Connectors for electronic equipment - Product requirements - Part 2: Sectional specification for circular connectors |
ISO 286-2:2010 | Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts |
ISO 129-1:2004 | Technical drawings Indication of dimensions and tolerances Part 1: General principles |
IEC 62197-1:2006 | Connectors for electronic equipment - Quality assessment requirements - Part 1: Generic specification |
IEC 60664-1:2007 | Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
IEC 60050-581:2008 | International Electrotechnical Vocabulary (IEV) - Part 581: Electromechanical components for electronic equipment |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.