Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

AS/NZS 2243.8:2006

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Safety in laboratories - Fume cupboards
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

30-06-2017

Language(s)

English

Published date

01-01-2006

Preview

Specifies safety requirements for laboratory fume cupboards and test methods to determine their performance. Siting and maintenance requirements are specified and requirements and guidance for the use of fume cupboards are included.

This Standard specifies safety requirements for fume cupboards and methods of test to be used to determine their performance. Appendix A provides the method for conducting a smoke test for a fume cupboard and Appendix B provides the method for determining face velocity. Appendix C describes typical materials used in the construction of fume cupboards and includes recommendations and requirements on material suitability.Fume cupboards covered by this Standard are intended primarily for use in general chemical operations but may be used for the special applications set out in Appendix D, provided that the additional relevant features described therein are incorporated.Recirculating fume cabinets (which recirculate air and do not extract to the outside atmosphere) are not included in this Standard (see AS/NZS 2243.9).NOTE: Appendix E provides recommendations for the procurement of a fume cupboard. Appendix F provides an example checklist and report form for compliance testing and Appendix G lists documents relating to the subject of this Standard.

Committee
CH-026
DocumentType
Standard
ISBN
0 7337 7388 5
Pages
53
PublisherName
Standards Australia
Status
Superseded
SupersededBy
Supersedes
UnderRevision

First published in Australia as AS 2243.8-1986.Second edition 1992.First published in New Zealand as NZS 7203:1987.Second edition 1992.AS 2243.8-1992 and NZS 7203:1992 jointly revised, amalgamated and redesignated as AS/NZS 2243.8:2001.Fourth edition 2006. Originated in Australia as AS 2243.8-1986. Originated in New Zealand as NZS 7203:1987. Previous edition AS/NZS 2243.8:2001. Fourth edition 2006.

AS 1940-2004 The storage and handling of flammable and combustible liquids
AS 1444-2007 Wrought alloy steels - Standard, hardenability (H) series and hardened and tempered to designated mechanical properties (Reconfirmed 2017)
AS/NZS 3000:2000 Electrical installations (known as the Australian/New Zealand Wiring Rules)
AS/NZS 2430.3.6:2004 Classification of hazardous areas Examples of area classification - Laboratories, including fume cupboards and flammable medical agents
AS/NZS 1668.1:1998 The use of ventilation and airconditioning in buildings Fire and smoke control in multi-compartment buildings
AS 2243.7-1991 Safety in laboratories - Electrical aspects
AS 2444-2001 Portable fire extinguishers and fire blankets - Selection and location (Reconfirmed 2021)
AS/NZS 1716:2003 Respiratory protective devices
AS/NZS 2208:1996 Safety glazing materials in buildings
AS/NZS 2243.3:2002 Safety in laboratories Microbiological aspects and containment facilities
AS 1807.20-2000 Cleanrooms, workstations, safety cabinets and pharmaceutical isolators - Methods of test Determination of sound level at installed workstations, safety cabinets and pharmaceutical isolators
AS/NZS 2243.2:2006 Safety in laboratories Chemical aspects
AS/NZS 1530.3:1999 Methods for fire tests on building materials, components and structures Simultaneous determination of ignitability, flame propagation, heat release and smoke release (Reconfirmed 2016)
AS 1288-2006 Glass in buildings - Selection and installation
AS 2243.4-1998 Safety in laboratories - Ionizing radiations
HB 13-2007 Electrical equipment for hazardous areas
AS/NZS 2243.10:2004 Safety in laboratories Storage of chemicals
AS/NZS 2243.1:2005 Safety in laboratories Planning and operational aspects
AS 1807.15-2000 Cleanrooms, workstations, safety cabinets and pharmaceutical isolators - Methods of test Determination of illuminance
HB 13-2000 Electrical equipment for hazardous areas
AS/NZS 2647:2000 Biological safety cabinets - Installation and use
AS/NZS 2243.9:2003 Safety in laboratories - Recirculating fume cabinets
AS 2567-2002 Laminar flow cytotoxic drug safety cabinets
AS/NZS 2982.1:1997 Laboratory design and construction General requirements
AS/NZS 1715:1994 Selection, use and maintenance of respiratory protective devices
AS 1444-1996 Wrought alloy steels - Standard, hardenability (H) series and hardened and tempered to designated mechanical properties
AS/NZS 2243.2:1997 Safety in laboratories - Chemical aspects
AS 1826-1983 Electrical equipment for explosive atmospheres - Special protection - Type of protection s

AS/NZS 2243.3:2002 Safety in laboratories Microbiological aspects and containment facilities
AS 1774.36-2009 Refractories and refractory materials - Physical test methods Determination of resistance to explosive spalling
AS 1038.2-2006 Coal and coke - Analysis and testing Coke - Total moisture (Reconfirmed 2016)
AS/NZS 2982:2010 Laboratory design and construction
AS 1470-1986 Health and safety at work - Principles and practices
AS 5239-2011 Examination of ignitable liquids in fire debris
AS/NZS 2243.9:2003 Safety in laboratories - Recirculating fume cabinets
AS/NZS 2243.10:2004 Safety in laboratories Storage of chemicals
AS 1038.9.4-2006 Coal and coke - Analysis and testing Higher rank coal - Phosphorus - Borate fusion/molybdenum blue method
AS 5388.1-2012 Forensic analysis Recognition, recording, recovery, transport and storage of material
AS 4969.3-2008 Analysis of acid sulfate soil - Dried samples - Methods of test Determination of peroxide pH (pHox), titratable peroxide acidity (TPA) and excess acid neutralizing capacity (ANCE)
AS/NZS 60079.10.1:2009 Explosive atmospheres Classification of areas - Explosive gas atmospheres (IEC 60079-10-1, Ed.1.0(2008) MOD)
AS/NZS 2891.3.2:1997 Methods of sampling and testing asphalt Bitumen content and aggregate grading - Centrifugal extraction method
AS 2503.2-2006 Refractories and refractory materials - Chemical analysis Aluminosilicate refractories
AS 1038.10.1-2003 Coal and coke - Analysis and testing Determination of trace elements - Coal, coke and fly-ash - Determination of eleven trace elements - Flame atomic absorption spectrometric method (Reconfirmed 2013)
AS 4969.12-2009 Analysis of acid sulfate soil - Dried samples - Methods of test Complete suspension peroxide oxidation combined acidity and sulfur (SPOCAS) method (Reconfirmed 2018)
AS 2830.1-1985 Good laboratory practice - Chemical analysis
AS/NZS 2341.20:1998 Methods of testing bitumen and related roadmarking products - Determination of sieve residue for bituminous materials
HB 37.4-1994 Handbook of Australian fire Standards Building materials, products and construction (Reconfirmed 2016)
AS 3502-1987 Urine - Determination of total arsenic - Furnace atomic absorption spectrometric method
AS/NZS 2891.3.1:1997 Methods of sampling and testing asphalt Bitumen content and aggregate grading - Reflux method
AS/NZS 2647:2000 Biological safety cabinets - Installation and use
AS 4969.6-2008 Analysis of acid sulfate soil - Dried samples - Methods of test Determination of acid extractable sulfur in soil residue after peroxide oxidation (SRAS) (Reconfirmed 2018)
AS/NZS 2243.1:2005 Safety in laboratories Planning and operational aspects
AS 4969.7-2008 Analysis of acid sulfate soil - Dried samples - Methods of test Determination of chromium reducible sulfur (SCR) (Reconfirmed 2018)
AS/NZS 2381.1:2005 Electrical equipment for explosive gas atmospheres - Selection, installation and maintenance - General requirements
AS 2891.10-2005 Methods of sampling and testing asphalt Water and volatile oils content
AS/NZS 2243.3:2010 Safety in laboratories Microbiological safety and containment
AS 4156.3-2008 Coal preparation Magnetite for coal preparation plant use - Test methods (Reconfirmed 2020)
AS 1038.18-2006 Coal and coke - Analysis and testing Coke - Size analysis (Reconfirmed 2016)
AS 2503.1-2006 Refractories and refractory materials - Chemical analysis Silica refractories
AS 2243.7-1991 Safety in laboratories - Electrical aspects
AS/NZS 2243.9:2009 Safety in laboratories Recirculating fume cabinets
AS 1038.1-2001 Coal and coke - Analysis and testing Higher rank coal - Total moisture
AS 1774.24-2006 Refractories and refractory materials - Physical test methods Determination of the resistance to thermal shock
AS 1038.21.1.1-2008 Coal and coke - Analysis and testing Higher rank coal and coke - Relative density - Analysis sample/density bottle method
AS/NZS 2891.3.3:2013 Methods of sampling and testing asphalt Binder content and aggregate grading - Pressure filter method
AS 4969.8-2008 Analysis of acid sulfate soil - Dried samples - Methods of test Determination of hydrochloric acid extractable sulfur (SHCl), calcium (CaHCl) and magnesium (MgHCl) (Reconfirmed 2018)
AS/NZS 2243.2:2006 Safety in laboratories Chemical aspects
AS/NZS 60079.14:2009 Explosive atmospheres Electrical installations design, selection and erection (IEC 60079-14, Ed. 4.0 (2007) MOD)
AS/NZS 2891.3.3:1997 Methods of sampling and testing asphalt Bitumen content and aggregate grading - Pressure filter method
AS 2503.4-2006 Refractories and refractory materials - Chemical analysis Dolomites and magnesites
AS/NZS 4782.3(INT):2006 Double-capped fluorescent lamps - Performance specifications Procedure for quantitative analysis of mercury present in fluorescent lamps
AS/NZS 2891.3.2:2013 Methods of sampling and testing asphalt Binder content and aggregate grading - Centrifugal extraction method
AS/NZS 2891.3.1:2013 Methods of sampling and testing asphalt Binder content and aggregate grading - Reflux method
AS 2503.3-2006 Refractories and refractory materials - Chemical analysis High alumina materials

View more information
$193.66
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more