We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
  • EN 20105-A02 : 1994

    Current The latest, up-to-date edition.
    Add to Watchlist
    This Standard has been added successfully to your Watchlist
    Please visit My Watchlist to see all standards that you are watching.
    Please log in or to add this standard to your Watchlist.
    We could not add this standard to your Watchlist.
    Please retry or contact support for assistance.
    We could not add this standard to your Watchlist.
    Please retry or contact support for assistance.
    You have already added this standard to your Watchlist.
    Visit My Watchlist to view the full list.

    TEXTILES - TESTS FOR COLOUR FASTNESS - PART A02: GREYSCALE FOR ASSESSING CHANGE IN COLOUR (ISO 105-A02:1993)

    Available format(s): 

    Language(s): 

    Published date:  30-08-1994

    Publisher:  Comite Europeen de Normalisation

    Add to Watchlist
    Pure ENs are not available for sale, please purchase a suitable national adoption

    Sorry this product is not available in your region.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Foreword
    1 Scope
    2 Principle
    3 Describing colour changes in fastness tests

    Abstract - (Show below) - (Hide below)

    Describes the grey scale for determining changes in colour of textiles in colour fastness tests, and its use.

    General Product Information - (Show below) - (Hide below)

    Committee CEN/TC 248
    Document Type Standard
    Publisher Comite Europeen de Normalisation
    Status Current

    Standards Referenced By This Book - (Show below) - (Hide below)

    I.S. EN ISO 105-EO8:1997 TEXTILES - TESTS FOR COLOUR FASTNESS - PART E08: COLOUR FASTNESS TO HOT WATER
    DIN EN 14906:2012-08 Leather - Leather for automotive - Test methods and testing parameters
    PREN 17142 : DRAFT 2017 MODULAR MULTILAYER FLOOR COVERINGS - ELEMENTS WITH A WOOD POWDER BASED SURFACE LAYER - SPECIFICATIONS, REQUIREMENTS AND TEST METHODS
    I.S. EN ISO 877:1997
    PD CEN/TS 16641:2014 TEXTILE FLOOR COVERINGS - GUIDELINES FOR ACCEPTABLE COLOUR DEVIATIONS
    06/30156314 DC : 0 BS EN 13120 - INTERNAL BLINDS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY
    06/30147607 DC : DRAFT MAR 2006 EN 13138-3 - BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 3: SAFETY REQUIREMENTS AND TEST METHODS FOR SWIM SEATS TO BE WORN
    12/30254411 DC : 0 BS EN 13138-1 - BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR BUOYANT AIDS TO BE WORN
    DIN EN 15619 E : 2014 RUBBER OR PLASTIC COATED FABRICS - SAFETY OF TEMPORARY STRUCTURES (TENTS) - SPECIFICATION FOR COATED FABRICS INTENDED FOR TENTS AND RELATED STRUCTURES
    BS EN 16732:2015 SLIDE FASTENERS (ZIPS) - SPECIFICATION
    DIN EN 124-6:2015-09 GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 6: GULLY TOPS AND MANHOLE TOPS MADE OF POLYPROPYLENE (PP), POLYETHYLENE (PE) OR UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U)
    12/30256977 DC : 0 BS EN 15619 - RUBBER OR PLASTIC COATED FABRICS - SAFETY OF TEMPORARY STRUCTURES (TENTS) - SPECIFICATION FOR COATED FABRICS INTENDED FOR TENTS AND RELATED STRUCTURES
    DIN EN 16732 E : 2016 SLIDE FASTENERS (ZIPS) - SPECIFICATION
    DIN EN 13245-3 E : 2010 PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 3: DESIGNATION OF PVC-UE PROFILES
    13/30291069 DC : 0 BS EN 12608-1 - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR THE FABRICATION OF WINDOWS AND DOORS - CLASSIFICATION, REQUIREMENTS AND TEST METHODS - PART 1: NON-COATED PVC-U PROFILES WITH LIGHT COLOURED SURFACES
    UNI EN 15836-2 : 2010 PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 2: REINFORCED MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 1,5 MM
    12/30212156 DC : 0 BS EN 13138-3:2007 - BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 3: SAFETY REQUIREMENTS AND TEST METHODS FOR SWIM SEATS TO BE WORN
    06/30140500 DC : DRAFT MAR 2006 EN 13138-1 - BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR BUOYANT AIDS TO BE WORN
    DIN EN 16732:2016-05 SLIDE FASTENERS (ZIPS) - SPECIFICATION
    BS EN 15619:2014 Rubber or plastic coated fabrics. Safety of temporary structures (tents). Specification for coated fabrics intended for tents and related structures
    I.S. EN 15836-2:2010 PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 2: REINFORCED MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 1,5 MM
    UNI EN ISO 105-G02 : 1999 TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO BURNT-GAS FUMES
    EN 14565 : 2004 RESILIENT FLOOR COVERINGS - FLOOR COVERINGS BASED UPON SYNTHETIC THERMOPLASTIC POLYMERS - SPECIFICATION
    UNE-EN 16732:2016 Slide fasteners (zips) - Specification
    I.S. EN 62329-2:2006 HEAT SHRINKABLE MOULDED SHAPES - PART 2: METHODS OF TEST
    I.S. EN 15619:2014 RUBBER OR PLASTIC COATED FABRICS - SAFETY OF TEMPORARY STRUCTURES (TENTS) - SPECIFICATION FOR COATED FABRICS INTENDED FOR TENTS AND RELATED STRUCTURES
    EN ISO 105-C09:2003/A1:2007 TEXTILES - TESTS FOR COLOUR FASTNESS - PART C09: COLOUR FASTNESS TO DOMESTIC AND COMMERCIAL LAUNDERING - OXIDATIVE BLEACH RESPONSE USING A NON-PHOSPHATE REFERENCE DETERGENT INCORPORATING A LOW TEMPERATURE BLEACH ACTIVATOR
    I.S. EN 14565:2004 RESILIENT FLOOR COVERINGS - FLOOR COVERINGS BASED UPON SYNTHETIC THERMOPLASTIC POLYMERS - SPECIFICATION
    I.S. EN ISO 17700:2005 FOOTWEAR - TEST METHODS FOR UPPERS, LININGS AND INSOCKS - COLOUR FASTNESS TO RUBBING
    BS EN ISO 12947-4 : 1999 TEXTILES - DETERMINATION OF THE ABRASION RESISTANCE OF FABRICS BY THE MARTINDALE METHOD - PART 4: ASSESSMENT OF APPEARANCE CHANGE
    EN ISO 11378-2:2001/A1:2017 Textile floor coverings - Laboratory soiling tests - Part 2: Drum test - Amendment 1 (ISO 11378-2:2001/Amd 1:2017)
    BS EN 13120 : 2009 INTERNAL BLINDS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY
    DIN EN 13138-1:2015-02 Buoyant aids for swimming instruction - Part 1: Safety requirements and test methods for buoyant aids to be worn
    DIN EN 13138-3:2015-02 Buoyant aids for swimming instruction - Part 3: Safety requirements and test methods for swim seats to be worn
    DIN EN 15330-2:2015-09 (Draft) SURFACES FOR SPORTS AREAS - SYNTHETIC TURF AND NEEDLE-PUNCHED SURFACES PRIMARILY DESIGNED FOR OUTDOOR USE - PART 2: SPECIFICATION FOR NEEDLE-PUNCHED SURFACES FOR TENNIS AND MULTI-SPORT SURFACES
    DIN EN 13561:2015-08 EXTERNAL BLINDS AND AWNINGS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY
    DIN EN ISO 12947-3:2007-04 Textiles - Determination of abrasion resistance of fabrics by the Martindale method - Part 3: Determination of mass loss (ISO 12947-3:1998 + Cor. 1:2002) (includes Corrigendum AC:2006)
    UNE-EN 12200-1:2017 Plastics rainwater piping systems for above ground external use - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
    BS EN ISO 105-N02:1995 TEXTILES - TESTS FOR COLOUR FASTNESS - PART N02: COLOUR FASTNESS TO BLEACHING - PEROXIDE
    BS EN ISO 105-X13:1997 TEXTILES - TESTS FOR COLOUR FASTNESS - PART X13: COLOUR FASTNESS OF WOOL DYES TO PROCESSES USING CHEMICAL MEANS FOR CREASING, PLEATING AND SETTING
    UNE-EN 13138-1:2015 Buoyant aids for swimming instruction - Part 1: Safety requirements and test methods for buoyant aids to be worn
    ISO 12947-3:1998 Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 3: Determination of mass loss
    BS EN ISO 11758:1997 RUBBER AND PLASTICS HOSES - EXPOSURE TO A XENON ARC LAMP - DETERMINATION OF CHANGES IN COLOUR AND APPEARANCE
    DIN EN 15200:2007-08 SANITARY APPLIANCES - MULTIFUNCTION SHOWER CABINETS
    BS EN 14465:2003 TEXTILES - UPHOLSTERY FABRICS - SPECIFICATION AND METHODS OF TEST
    BS EN ISO 105-B08 : 1999 TEXTILES - TESTS FOR COLOUR FASTNESS - PART B08: QUALITY CONTROL OF BLUE WOOL REFERENCE MATERIALS 1 TO 7
    I.S. EN 15330-1:2013 SURFACES FOR SPORTS AREAS - SYNTHETIC TURF AND NEEDLE-PUNCHED SURFACES PRIMARILY DESIGNED FOR OUTDOOR USE - PART 1: SPECIFICATION FOR SYNTHETIC TURF SURFACES FOR FOOTBALL, HOCKEY, RUGBY UNION TRAINING, TENNIS AND MULTI-SPORTS USE
    EN 12877-2 : 1999 COLOURING MATERIALS IN PLASTICS - DETERMINATION OF COLOUR STABILITY TO HEAT DURING PROCESSING OF COLOURING MATERIALS IN PLASTICS - PART 2: DETERMINATION BY INJECTION MOULDING
    CEN/TS 16641 : 2014 TEXTILE FLOOR COVERINGS - GUIDELINES FOR ACCEPTABLE COLOUR DEVIATIONS
    EN 12877-3 : 1999 COLOURING MATERIALS IN PLASTICS - DETERMINATION OF COLOUR STABILITY TO HEAT DURING PROCESSING OF COLOURING MATERIALS IN PLASTICS - PART 3 - DETERMINATION BY OVEN TEST
    EN 13561:2015/AC:2016 EXTERNAL BLINDS AND AWNINGS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY
    EN 124-6:2015 Gully tops and manhole tops for vehicular and pedestrian areas - Part 6: Gully tops and manhole tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U)
    EN ISO 16871 : 2003 PLASTICS PIPING AND DUCTING SYSTEMS - PLASTICS PIPES AND FITTINGS - METHOD FOR EXPOSURE TO DIRECT (NATURAL) WEATHERING
    UNI EN 13138-3 : 2015 BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 3: SAFETY REQUIREMENTS AND TEST METHODS FOR SWIM SEATS TO BE WORN
    DIN EN 15115:2007-03 Textile floor coverings - Determination of sensitivity to spilled water
    EN 14906 : 2012 LEATHER - LEATHER FOR AUTOMOTIVE - TEST METHODS AND TESTING PARAMETERS
    EN ISO 17700 : 2005 FOOTWEAR - TEST METHODS FOR UPPERS, LININGS AND INSOCKS - COLOUR FASTNESS TO RUBBING
    EN 13516:2001/AC:2003 FOOTWEAR - TEST METHODS FOR UPPERS, LINING AND INSOCKS - COLOUR FASTNESS TO RUBBING
    EN 13245-3:2010 Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 3: Designation of PVC-UE profiles
    EN 12877-1 : 1999 COLOURING MATERIALS IN PLASTICS - DETERMINATION OF COLOUR STABILITY TO HEAT DURING PROCESSING OF COLOURING MATERIALS IN PLASTICS - GENERAL INTRODUCTION
    DIN EN 15836-1:2010-11 Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 1: Homogenous membranes of nominal thickness equal to or greater than 0,75 mm
    11/30241848 DC : 0 BS EN 13561 - EXTERNAL BLINDS AND AWNINGS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY
    UNE-EN 15836-1:2010 Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 1: Homogenous membranes of nominal thickness equal to or greater than 0,75 mm
    I.S. EN 12608:2003 UNPLASTICIZED POLYVINYLCHLORIDE (PVC-U) PROFILES FOR THE FABRICATION OF WINDOWS AND DOORS - CLASSIFICATION, REQUIREMENTS AND TEST METHODS
    I.S. EN 13516:2002 FOOTWEAR - TEST METHODS FOR UPPERS, LINING AND INSOCKS - COLOUR FASTNESS TO RUBBING
    14/30302452 DC : 0 BS EN 13561 - EXTERNAL BLINDS AND AWNINGS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY
    BS EN 14906:2012 Leather. Leather for automotive. Test methods and testing parameters
    BS EN ISO 25649-1:2017 (published 2017-10) Floating leisure articles for use on and in the water Classification, materials, general requirements and test methods
    DIN EN 12608-1 E : 2016 UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR THE FABRICATION OF WINDOWS AND DOORS - CLASSIFICATION, REQUIREMENTS AND TEST METHODS - PART 1: NON-COATED PVC-U PROFILES WITH LIGHT COLOURED SURFACES
    15/30326242 DC : 0 BS EN 15330-2 - SURFACES FOR SPORTS AREAS - SYNTHETIC TURF AND NEEDLE-PUNCHED SURFACES PRIMARILY DESIGNED FOR OUTDOOR USE - PART 2: SPECIFICATION FOR NEEDLE-PUNCHED SURFACES FOR TENNIS AND MULTISPORT SURFACES
    BS EN 12608-1:2016 UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR THE FABRICATION OF WINDOWS AND DOORS - CLASSIFICATION REQUIREMENTS AND TEST METHODS - PART 1: NON-COATED PVC-U PROFILES WITH LIGHT COLOURED SURFACES
    BS EN 15534-1 : 2014 COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1: TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS
    I.S. EN ISO 105-G02:1997 TEXTILES - TESTS FOR COLOUR FASTNESS - PART G02: COLOUR FASTNESS TO BURNT-GAS FUMES
    08/30181781 DC : DRAFT JULY 2008 BS EN 15836-2 - PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 2: REINFORCED MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 1,5 MM
    I.S. EN 16732:2015 SLIDE FASTENERS (ZIPS) - SPECIFICATION
    08/30181778 DC : DRAFT JULY 2008 BS EN 15836-1 - PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 1: HOMOGENOUS MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 0,75 MM
    UNI CEN/TS 16641 : 2014 TEXTILE FLOOR COVERINGS - GUIDELINES FOR ACCEPTABLE COLOUR DEVIATIONS
    PREN 15330-1 : DRAFT 2013 SURFACES FOR SPORTS AREAS - SYNTHETIC TURF AND NEEDLE-PUNCHED SURFACES PRIMARILY DESIGNED FOR OUTDOOR USE - PART 1: SPECIFICATION FOR SYNTHETIC TURF SURFACES FOR FOOTBALL, HOCKEY, RUGBY UNION TRAINING, TENNIS AND MULTI-SPORTS USE
    I.S. EN 124-6:2015 GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 6: GULLY TOPS AND MANHOLE TOPS MADE OF POLYPROPYLENE (PP), POLYETHYLENE (PE) OR UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U)
    PREN 513 : DRAFT 2017 PLASTICS - POLY(VINYL CHLORIDE) (PVC) BASED PROFILES - DETERMINATION OF THE RESISTANCE TO ARTIFICIAL WEATHERING
    EN ISO 105-G02:1997/AC:2009 TEXTILES - TESTS FOR COLOUR FASTNESS - PART G02: COLOUR FASTNESS TO BURNT-GAS FUMES
    DIN EN 1471:2014-05 (Draft) TEXTILE FLOOR COVERINGS - ASSESSMENT OF CHANGES IN APPEARANCE
    DIN EN 15115 E : 2007 TEXTILE FLOOR COVERINGS - DETERMINATION OF SENSITIVITY TO SPILLED WATER
    DIN EN 14565:2004-09 RESILIENT FLOOR COVERINGS - FLOOR COVERINGS BASED UPON SYNTHETIC THERMOPLASTIC POLYMERS - SPECIFICATION
    DIN EN ISO 11378-2:2003-02 TEXTILE FLOOR COVERINGS - LABORATORY SOILING TESTS - PART 2: DRUM TEST (ISO 11378-2:2001 + AMD 1:2017)
    EN 13138-3:2014 BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 3: SAFETY REQUIREMENTS AND TEST METHODS FOR SWIM SEATS TO BE WORN
    BS EN 13138-1:2008 BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR BUOYANT AIDS TO BE WORN
    I.S. EN 13138-1:2014 BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR BUOYANT AIDS TO BE WORN
    I.S. EN 13138-2:2014 BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 2: SAFETY REQUIREMENTS AND TEST METHODS FOR BUOYANT AIDS TO BE HELD
    I.S. EN 263:2008 SANITARY APPLIANCES - CROSSLINKED CAST ACRYLIC SHEETS FOR BATHS AND SHOWER TRAYS FOR DOMESTIC PURPOSES
    I.S. EN 14877:2013 SYNTHETIC SURFACES FOR OUTDOOR SPORTS AREAS - SPECIFICATION
    I.S. EN 13245-1:2010 PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 1: DESIGNATION OF PVC-U PROFILES
    DIN EN 12608:2003-09 UNPLASTICIZED POLYVINYLCHLORIDE (PVC-U) PROFILES FOR THE FABRICATION OF WINDOWS AND DOORS - CLASSIFICATION, REQUIREMENTS AND TEST METHODS
    DIN EN 13516:2002-04 FOOTWEAR - TEST METHODS FOR UPPERS, LINING AND INSOCKS - COLOUR FASTNESS TO RUBBING
    I.S. EN 15330-2:2017 SURFACES FOR SPORTS AREAS - SYNTHETIC TURF AND NEEDLE-PUNCHED SURFACES PRIMARILY DESIGNED FOR OUTDOOR USE - PART 2: SPECIFICATION FOR NEEDLE-PUNCHED SURFACES FOR TENNIS AND MULTI-SPORT SURFACES
    I.S. EN 607:2004 EAVES GUTTERS AND FITTINGS MADE OF PVC-U - DEFINITIONS, REQUIREMENTS AND TESTING
    I.S. EN 12200-1:2016 PLASTICS RAINWATER PIPING SYSTEMS FOR ABOVE GROUND EXTERNAL USE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
    I.S. EN 13138-3:2014 BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 3: SAFETY REQUIREMENTS AND TEST METHODS FOR SWIM SEATS TO BE WORN
    I.S. EN 13120:2009 INTERNAL BLINDS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY
    I.S. EN 13561:2015 EXTERNAL BLINDS AND AWNINGS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY
    PREN 15330-2 : DRAFT 2015 SURFACES FOR SPORTS AREAS - SYNTHETIC TURF AND NEEDLE-PUNCHED SURFACES PRIMARILY DESIGNED FOR OUTDOOR USE - PART 2: SPECIFICATION FOR NEEDLE-PUNCHED SURFACES FOR TENNIS AND MULTISPORT SURFACES
    I.S. EN ISO 25649-1:2017 FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS (ISO 25649-1:2017)
    PREN 13138-3 : DRAFT 2012 BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 3: SAFETY REQUIREMENTS AND TEST METHODS FOR SWIM SEATS TO BE WORN
    06/30147606 DC : DRAFT MAR 2006 EN 13138-2 - BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 2: SAFETY REQUIREMENTS AND TEST METHODS FOR BUOYANT AIDS TO BE HELD
    15/30313584 DC : 0 BS ISO 25649-1 - FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS
    UNE-EN 15836-2:2010 Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 2: Reinforced membranes of nominal thickness equal to or greater than 1,5 mm
    07/30158824 DC : 0 BS EN 15618 - RUBBER OR PLASTIC-COATED FABRICS - UPHOLSTERY FABRICS - CLASSIFICATION AND METHODS OF TEST
    08/30194094 DC : 0 BS EN 13245-3 - PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 3: DESIGNATION OF PVC-UE PROFILES
    BS EN 15649-1 : 2009 FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS
    DIN EN 124-6 E : 2015 GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 6: GULLY TOPS AND MANHOLE TOPS MADE OF POLYPROPYLENE (PP), POLYETHYLENE (PE) OR UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U)
    BS EN 62329-2:2006 HEAT SHRINKABLE MOULDED SHAPES - PART 2: METHODS OF TEST
    UNE-EN 12608-1:2016 Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrication of windows and doors - Classification, requirements and test methods - Part 1: Non-coated PVC-U profiles with light coloured surfaces
    UNE-EN 15649-1:2010 Floating leisure articles for use on and in the water - Part 1: Classification, materials, general requirements and test methods
    UNE-EN 124-6:2015 Gully tops and manhole tops for vehicular and pedestrian areas - Part 6: Gully tops and manhole tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U)
    I.S. EN 13245-3:2010 PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 3: DESIGNATION OF PVC-UE PROFILES
    I.S. EN 15836-1:2010 PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 1: HOMOGENOUS MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 0,75 MM
    PREN 1471 : DRAFT 2014 TEXTILE FLOOR COVERINGS - ASSESSMENT OF CHANGES IN APPEARANCE
    UNI EN 13245-3 : 2010 PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 3: DESIGNATION OF PVC-UE PROFILES
    NF EN 15836-2 : 2010 PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 2: REINFORCED MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 1,5 MM
    UNI EN 14906 : 2012 LEATHER - LEATHER FOR AUTOMOTIVE - TEST METHODS AND TESTING PARAMETERS
    DIN EN ISO 17700:2005-12 FOOTWEAR - TEST METHODS FOR UPPERS, LININGS AND INSOCKS - COLOUR FASTNESS TO RUBBING
    I.S. EN 13329:2016 LAMINATE FLOOR COVERINGS - ELEMENTS WITH A SURFACE LAYER BASED ON AMINOPLASTIC THERMOSETTING RESINS - SPECIFICATIONS, REQUIREMENTS AND TEST METHODS
    ONORM EN ISO 17700 : 2005 FOOTWEAR - TEST METHODS FOR UPPERS, LININGS AND INSOCKS - COLOUR FASTNESS TO RUBBING
    DIN EN 13120:2014-09 INTERNAL BLINDS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY
    DIN EN 14565 E : 2004 RESILIENT FLOOR COVERINGS - FLOOR COVERINGS BASED UPON SYNTHETIC THERMOPLASTIC POLYMERS - SPECIFICATION
    DIN EN 14877 E : 2013 SYNTHETIC SURFACES FOR OUTDOOR SPORTS AREAS - SPECIFICATION
    BS EN 12877-4:2000 Colouring materials in plastics. Determination of colour stability to heat during processing of colouring materials in plastics Determination by two-roll milling
    BS EN 12608:2003 UNPLASTICIZED POLYVINYLCHLORIDE (PVC-U) PROFILES FOR THE FABRICATION OF WINDOWS AND DOORS - CLASSIFICATION, REQUIREMENTS AND TEST METHODS
    BS EN 1471:1997 TEXTILE FLOOR COVERINGS - ASSESSMENT OF CHANGES IN APPEARANCE
    ISO 15702:1998 Leather Tests for colour fastness Colour fastness to machine washing
    UNE-EN 13138-2:2015 Buoyant aids for swimming instruction - Part 2: Safety requirements and test methods for buoyant aids to be held
    DIN EN 14877:2013-12 Synthetic surfaces for outdoor sports areas - Specification
    EN 12608-1 : 2016 UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR THE FABRICATION OF WINDOWS AND DOORS - CLASSIFICATION, REQUIREMENTS AND TEST METHODS - PART 1: NON-COATED PVC-U PROFILES WITH LIGHT COLOURED SURFACES
    EN ISO 12947-3:1998/AC:2006 Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 3: Determination of mass loss (ISO 12947-3:1998/Cor.1:2002)
    EN ISO 105-E10 : 1996 TEXTILES - TESTS FOR COLOUR FASTNESS - PART E10: COLOUR FASTNESS TO DECATIZING
    UNI EN 15330-1 : 2013 SURFACES FOR SPORTS AREAS - SYNTHETIC TURF AND NEEDLE-PUNCHED SURFACES PRIMARILY DESIGNED FOR OUTDOOR USE - PART 1: SPECIFICATION FOR SYNTHETIC TURF SURFACES FOR FOOTBALL, HOCKEY, RUGBY UNION TRAINING, TENNIS AND MULTI-SPORTS USE
    UNI EN 13245-1 : 2010 PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 1: DESIGNATION OF PVC-U PROFILES
    UNI EN ISO 105-B08 : 2009 TEXTILES - TESTS FOR COLOUR FASTNESS - PART B08: QUALITY CONTROL OF BLUE WOOL REFERENCE MATERIALS 1 TO 7
    UNI EN 13120 : 2014 INTERNAL BLINDS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY
    UNI EN ISO 12947-3 : 2000 TEXTILES - DETERMINATION OF THE ABRASION RESISTANCE OF FABRICS BY THE MARTINDALE METHOD - DETERMINATION OF MASS LOSS
    UNI EN 263 : 2008 SANITARY APPLIANCES - CROSSLINKED CAST ACRYLIC SHEETS FOR BATHS AND SHOWER TRAYS FOR DOMESTIC PURPOSES
    UNI EN 14877 : 2013 SYNTHETIC SURFACES FOR OUTDOOR SPORTS AREAS - SPECIFICATION
    UNI EN ISO 12947-4 : 2000 TEXTILES - DETERMINATION OF THE ABRASION RESISTANCE OF FABRICS BY THE MARTINDALE METHOD - ASSESSMENT OF APPEARANCE CHANGE
    EN 607:2004 EAVES GUTTERS AND FITTINGS MADE OF PVC-U - DEFINITIONS, REQUIREMENTS AND TESTING
    UNI EN 15619 : 2014 RUBBER OR PLASTIC COATED FABRICS - SAFETY OF TEMPORARY STRUCTURES (TENTS) - SPECIFICATION FOR COATED FABRICS INTENDED FOR TENTS AND RELATED STRUCTURES
    UNI EN 15200 : 2007 SANITARY APPLIANCES - MULTIFUNCTION SHOWER CABINETS
    DIN EN 15836-2:2010-11 Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 2: Reinforced membranes of nominal thickness equal to or greater than 1,5 mm
    DIN EN 13245-3:2010-11 Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 3: Designation of PVC-UE profiles
    I.S. EN ISO 105-BO4:1997 TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO ARTIFICIAL WEATHERING: XENON ARC FADING LAMP TEST
    UNI EN 15836-1 : 2010 PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 1: HOMOGENOUS MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 0,75 MM
    BS EN 15836-1:2010 PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 1: HOMOGENOUS MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 0.75 MM
    12/30254414 DC : 0 BS EN 13138-2 - BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 2: SAFETY REQUIREMENTS AND TEST METHODS FOR BUOYANT AIDS TO BE HELD
    12/30266170 DC : 0 BS EN 15534-1 - COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1 : TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS
    BS EN 13245-3:2010 Plastics. Unplasticized poly(vinyl chloride) (PVCU) profiles for building applications Designation of PVC-UE profiles
    06/30148739 DC : DRAFT APR 2006 EN 13138-2 - BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 2: SAFETY REQUIREMENTS AND TEST METHODS FOR BUOYANT AIDS TO BE HELD
    DIN EN 15649-1:2014-06 FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS
    BS EN 13329 : 2016 LAMINATE FLOOR COVERINGS - ELEMENTS WITH A SURFACE LAYER BASED ON AMINOPLASTIC THERMOSETTING RESINS - SPECIFICATIONS, REQUIREMENTS AND TEST METHODS
    08/30189974 DC : DRAFT DEC 2008 BS EN 13245-1 - PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 1: DESIGNATION OF PVC-U PROFILES
    07/30158827 DC : 0 BS EN 15619 - RUBBER OR PLASTIC COATED FABRICS - SAFETY OF TEMPORARY STRUCTURES (TENTS) - SPECIFICATION FOR COATED FABRICS INTENDED FOR TENTS AND RELATED STRUCTURES
    02/123818 DC : DRAFT OCT 2002 BS EN 14565 - RESILIENT FLOOR COVERINGS - FLOOR COVERINGS BASED UPON SYNTHETIC THERMOPLASTIC POLYMERS - SPECIFICATION
    UNI EN 15649-1 : 2014 FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS
    EN 13329:2016+A1:2017 LAMINATE FLOOR COVERINGS - ELEMENTS WITH A SURFACE LAYER BASED ON AMINOPLASTIC THERMOSETTING RESINS - SPECIFICATIONS, REQUIREMENTS AND TEST METHODS
    DIN EN 607:2005-02 EAVES GUTTERS AND FITTINGS MADE OF PVC-U - DEFINITIONS, REQUIREMENTS AND TESTING
    BS EN ISO 105-C09:2003 Textiles. Tests for colour fastness Colour fastness to domestic and commercial laundering. Oxidative bleach response using a non-phosphate reference detergent incorporating a low temperature bleach activator
    ISO 15700:1998 Leather Tests for colour fastness Colour fastness to water spotting
    BS EN 607:2004 Eaves gutters and fittings made of PVC-U. Definitions, requirements and testing
    ISO 105-C09:2001 Textiles Tests for colour fastness Part C09: Colour fastness to domestic and commercial laundering Oxidative bleach response using a non-phosphate reference detergent incorporating a low temperature bleach activator
    BS EN 263:2008 SANITARY APPLIANCES - CROSSLINKED CAST ACRYLIC SHEETS FOR BATHS AND SHOWER TRAYS FOR DOMESTIC PURPOSES
    BS EN 13138-2:2014 BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 2: SAFETY REQUIREMENTS AND TEST METHODS FOR BUOYANT AIDS TO BE HELD
    UNE-EN 13138-3:2015 Buoyant aids for swimming instruction - Part 3: Safety requirements and test methods for swim seats to be worn
    BS EN 13277-1:2000 Protective equipment for martial arts General requirements and test methods
    DIN EN 15334 E : 2007 SANITARY APPLIANCES - METHACRYLIC DISPERSIONS OF HIGH FILLER CONTENT
    DIN EN 13245-1 E : 2010 PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 1: DESIGNATION OF PVC-U PROFILES
    DIN EN 15200 E : 2007 SANITARY APPLIANCES - MULTIFUNCTION SHOWER CABINETS
    BS EN 12200-1:2016 Plastics rainwater piping systems for above ground external use. Unplasticized poly(vinyl chloride) (PVC-U) Specifications for pipes, fittings and the system
    BS EN 14565:2004 RESILIENT FLOOR COVERINGS - FLOOR COVERINGS BASED UPON SYNTHETIC THERMOPLASTIC POLYMERS - SPECIFICATION
    BS EN 12877-2:2000 Colouring materials in plastics. Determination of colour stability to heat during processing of colouring materials in plastics Determination by injection moulding
    DIN EN 13245-1:2010-11 Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 1: Designation of PVC-U profiles
    ISO 105-E08:1994 Textiles Tests for colour fastness Part E08: Colour fastness to hot water
    ISO 105-X13:1994 Textiles Tests for colour fastness Part X13: Colour fastness of wool dyes to processes using chemical means for creasing, pleating and setting
    ISO 105-E10:1994 Textiles Tests for colour fastness Part E10: Colour fastness to decatizing
    BS EN 15200:2007 Sanitary appliances. Multifunction shower cabinets
    ISO 16871:2003 Plastics piping and ducting systems Plastics pipes and fittings Method for exposure to direct (natural) weathering
    ISO 17700:2004 Footwear Test methods for uppers, linings and insocks Colour fastness to rubbing
    BS EN ISO 105-N03:1995 TEXTILES - TESTS FOR COLOUR - FASTNESS - PART N03: COLOUR FASTNESS TO BLEACHING - SODIUM CHLORITE (MILD)
    BS EN 13245-1:2010 Plastics. Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications Designation of PVC-U profiles
    BS EN 13561:2015 EXTERNAL BLINDS AND AWNINGS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY
    ISO 105-X11:1994 Textiles Tests for colour fastness Part X11: Colour fastness to hot pressing
    BS EN 12877-3:2000 Colouring materials in plastics. Determination of colour stability to heat during processing of colouring materials in plastics Determination by oven test
    BS EN ISO 17700:2005 FOOTWEAR - TEST METHODS FOR UPPERS, LININGS AND INSOCKS - COLOUR FASTNESS TO RUBBING
    BS EN 15330-1 : 2013 SURFACES FOR SPORTS AREAS - SYNTHETIC TURF AND NEEDLE-PUNCHED SURFACES PRIMARILY DESIGNED FOR OUTDOOR USE - PART 1: SPECIFICATION FOR SYNTHETIC TURF SURFACES FOR FOOTBALL, HOCKEY, RUGBY UNION TRAINING, TENNIS AND MULTI-SPORTS USE
    DIN EN 15334:2007-05 Sanitary appliances - Methacrylic dispersions of high filler content
    EN ISO 105-N03 : 1995 TEXTILES - TESTS FOR COLOUR - FASTNESS - PART N03: COLOUR FASTNESS TO BLEACHING - SODIUM CHLORITE (MILD) (ISO 105-N03:1993)
    EN 15334 : 2007 SANITARY APPLIANCES - METHACRYLIC DISPERSIONS OF HIGH FILLER CONTENT
    EN 15330-1:2013 SURFACES FOR SPORTS AREAS - SYNTHETIC TURF AND NEEDLE-PUNCHED SURFACES PRIMARILY DESIGNED FOR OUTDOOR USE - PART 1: SPECIFICATION FOR SYNTHETIC TURF SURFACES FOR FOOTBALL, HOCKEY, RUGBY UNION TRAINING, TENNIS AND MULTI-SPORTS USE
    EN 15200:2007/AC:2009 SANITARY APPLIANCES - MULTIFUNCTION SHOWER CABINETS
    EN ISO 105-S02 : 1995 TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO ANIZATION: SULFUR MONOCHLORIDE
    EN ISO 105-X02 : 1995 TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO CARBONIZING: SULPHURIC ACID
    EN 15330-2:2017 Surfaces for sports areas - Synthetic turf and needle-punched surfaces primarily designed for outdoor use - Part 2: Specification for needle-punched surfaces for tennis and multi-sport surfaces
    EN ISO 105-Z01 : 1995 TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO METALS IN THE DYE-BATH: CHROMIUM SALTS (ISO 105-Z01:1993)
    EN 1327:1996 Gas welding equipment - Thermoplastic hoses for welding and allied processes
    EN ISO 105-X09 : 1995 TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO FORMALDEHYDE
    EN ISO 12947-4:1998/AC:2006 TEXTILES - DETERMINATION OF THE ABRASION RESISTANCE OF FABRICS BY THE MARTINDALE METHOD - PART 4: ASSESSMENT OF APPEARANCE CHANGE
    EN 15115:2006 Textile floor coverings - Determination of sensitivity to spilled water
    EN ISO 105-Z06 : 2000 TEXTILES - TESTS FOR COLOUR FASTNESS - PART Z06: EVALUATION OF DYE AND PIGMENT MIGRATION
    EN 14877:2013 SYNTHETIC SURFACES FOR OUTDOOR SPORTS AREAS - SPECIFICATION
    EN ISO 877 : 1996
    EN ISO 105-X08 : 1997 TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO DEGUMMING
    EN ISO 105-E08 : 1996 TEXTILES - TESTS FOR COLOUR FASTNESS - PART E08: COLOUR FASTNESS TO HOT WATER
    EN ISO 105-B05 : 1995 TEXTILES - TESTS FOR COLOUR FASTNESS - DETECTION AND ASSESSMENT OF PHOTOCHROMISM
    EN ISO 15700 : 1999 LEATHER - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO WATER SPOTTING
    EN ISO 105-X14 : 1997 TEXTILES - TESTS FOR COLOUR FASTNESS - PART X14: COLOUR FASTNESS TO ACID CHLORINATION OF WOOL: SODIUM DICHLOROISOCYANURATE
    EN 1471:1996/A1:2003 TEXTILE FLOOR COVERINGS - ASSESSMENT OF CHANGES IN APPEARANCE
    EN 15619:2014 RUBBER OR PLASTIC COATED FABRICS - SAFETY OF TEMPORARY STRUCTURES (TENTS) - SPECIFICATION FOR COATED FABRICS INTENDED FOR TENTS AND RELATED STRUCTURES
    EN ISO 105-N05 : 1995 TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO STOVING (ISO 105-N05:1993)
    EN ISO 105-X13 : 1997 Textiles - Tests for colour fastness - Part X13: Colour fastness of wool dyes to processes using chemical means for creasing, pleating and setting (ISO 105-X13:1994)
    EN 15649-1:2009+A2:2013 FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS
    EN ISO 105-B04:1997 Textiles - Tests for colour fastness - Part B04: Colour fastness to artificial weathering: Xenon arc fading lamp test (ISO 105-B04:1994)
    EN 14465:2003/A1:2006 TEXTILES - UPHOLSTERY FABRICS - SPECIFICATION AND METHODS OF TEST
    EN ISO 105-N04 : 1995 TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO BLEACHING - SODIUM CHLORITE (SEVERE)
    EN 15836-2 : 2010 PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 2: REINFORCED MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 1,5 MM
    EN ISO 105-X05 : 1997 TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO ORGANIC SOLVENTS
    EN ISO 15703 : 1999 LEATHER - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO MILD WASHING
    EN 16732:2015 Slide fasteners (zips) - Specification
    EN ISO 11758:1997/AC:1998 RUBBER AND PLASTICS HOSES - EXPOSURE TO A XENON ARC LAMP - DETERMINATION OF CHANGES IN COLOUR AND APPEARANCE
    EN ISO 105-G03 : 1997 TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO OZONE IN THE ATMOSPHERE
    EN ISO 105-X11 : 1996 TEXTILES - TESTS FOR COLOUR FASTNESS - PART X11: COLOUR FASTNESS TO HOT PRESSING (ISO-X11:1994)
    EN ISO 105-S01 : 1995 Textiles - Tests for colour fastness - Part S01: Colour fastness to vulcanization: Hot air (ISO 105-S01/1993)
    EN ISO 15702 : 1999 LEATHER - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO MACHINE WASHING
    EN ISO 105-X06 : 1997 TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO SODA BOILING
    EN 263 : 2008 SANITARY APPLIANCES - CROSSLINKED CAST ACRYLIC SHEETS FOR BATHS AND SHOWER TRAYS FOR DOMESTIC PURPOSES
    EN ISO 105-S03 : 1995 TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO VULCANIZATION : OPEN STEAM (ISO 105-S03:1993)
    EN ISO 105-X07 : 1997 TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO CROSS-DYEING: WOOL
    EN ISO 105-N02 : 1995 TEXTILES - TESTS FOR COLOUR FASTNESS - PART N02: COLOUR FASTNESS TO BLEACHING - PEROXIDE (ISO 105-N02:1993)
    EN ISO 105-B08:1999/A1:2009 Textiles - Tests for colour fastness - Part B08: Quality control of blue wool reference materials 1 to 7 - Amendment 1 (ISO 105-B08:1995/Amd 1:2009)
    EN ISO 105-X04 : 1997 TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO MERCERIZING
    EN 15836-1 : 2010 PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 1: HOMOGENOUS MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 0.75 MM
    EN ISO 105-Z02 : 1995 TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO METALS IN THE DYE-BATH: IRON AND COPPER
    13/30262917 DC : 0 BS EN 15330-1 - SURFACES FOR SPORTS AREAS - SYNTHETIC TURF AND NEEDLE-PUNCHED SURFACES PRIMARILY DESIGNED FOR OUTDOOR USE - PART 1: SPECIFICATION FOR SYNTHETIC TURF SURFACES FOR FOOTBALL, HOCKEY, RUGBY UNION TRAINING, TENNIS AND MULTI-SPORTS USE
    I.S. EN ISO 11758:1998 RUBBER AND PLASTICS HOSES - EXPOSURE TO A XENON ARC LAMP - DETERMINATION OF CHANGES IN COLOUR AND APPEARANCE
    13/30289253 DC : 0 BS EN 13329 - LAMINATE FLOOR COVERINGS - ELEMENTS WITH A SURFACE LAYER BASED ON AMINOPLASTIC THERMOSETTING RESINS - SPECIFICATIONS, REQUIREMENTS AND TEST METHODS
    07/30161895 DC : 0 BS EN 15649-1 - FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS
    BS EN 15836-2:2010 PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 2: REINFORCED MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 1,5 MM
    DIN EN 15619:2014-07 RUBBER OR PLASTIC COATED FABRICS - SAFETY OF TEMPORARY STRUCTURES (TENTS) - SPECIFICATION FOR COATED FABRICS INTENDED FOR TENTS AND RELATED STRUCTURES
    14/30302995 DC : 0 BS EN 16776 - RESILIENT FLOOR COVERINGS - HOMOGENEOUS AND HETEROGENEOUS POLYURETHANE FLOOR COVERINGS - SPECIFICATION
    04/30055611 DC : 0 BS EN 124 - GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS
    BS EN 124-6:2015 GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 6: GULLY TOPS AND MANHOLE TOPS MADE OF POLYPROPYLENE (PP), POLYETHYLENE (PE) OR UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U)
    NF EN 13245-3 : 2010 PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 3: DESIGNATION OF PVC-UE PROFILES
    UNE-EN 13245-3:2011 Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 3: Designation of PVC-UE profiles
    PREN 13138-2 : DRAFT 2012 BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 2: SAFETY REQUIREMENTS AND TEST METHODS FOR BUOYANT AIDS TO BE HELD
    06/30148736 DC : 0 EN 13138-1 - BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR BUOYANT AIDS TO BE WORN
    UNE-EN 14906:2012 Leather - Leather for automotive - Test methods and testing parameters
    I.S. EN 14906:2012 LEATHER - LEATHER FOR AUTOMOTIVE - TEST METHODS AND TESTING PARAMETERS
    I.S. EN 12608-1:2016 UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR THE FABRICATION OF WINDOWS AND DOORS - CLASSIFICATION, REQUIREMENTS AND TEST METHODS - PART 1: NON-COATED PVC-U PROFILES WITH LIGHT COLOURED SURFACES
    NF EN 15836-1 : 2010 PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 1: HOMOGENOUS MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 0,75 MM
    I.S. EN 15534-1:2014 COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1: TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS
    PREN 13561 : DRAFT 2014 EXTERNAL BLINDS AND AWNINGS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY
    BS EN ISO 105-G02:1997 TEXTILES - TESTS FOR COLOUR FASTNESS - PART G02: COLOUR FASTNESS TO BURNT-GAS FUMES
    I.S. EN 15649-1:2009 FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS
    17/30359853 DC : 0 BS EN 17142 - MODULAR MULTILAYER FLOOR COVERINGS - ELEMENTS WITH A WOOD POWDER BASED SURFACE LAYER - SPECIFICATIONS, REQUIREMENTS AND TEST METHODS
    14/30295887 DC : 0 BS EN 1471 - TEXTILE FLOOR COVERINGS - ASSESSMENT OF CHANGES IN APPEARANCE
    17/30361211 DC : 0 BS EN 513 - PLASTICS - POLY(VINYL CHLORIDE) (PVC) BASED PROFILES - DETERMINATION OF THE RESISTANCE TO ARTIFICIAL WEATHERING
    S.R. CEN/TS 16641:2014 TEXTILE FLOOR COVERINGS - GUIDELINES FOR ACCEPTABLE COLOUR DEVIATIONS
    EN ISO 25649-1 : 2017 FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS (ISO 25649-1:2017)
    BS EN 13120:2009+A1:2014 INTERNAL BLINDS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY
    DIN EN 15330-1:2013-12 SURFACES FOR SPORTS AREAS - SYNTHETIC TURF AND NEEDLE-PUNCHED SURFACES PRIMARILY DESIGNED FOR OUTDOOR USE - PART 1: SPECIFICATION FOR SYNTHETIC TURF SURFACES FOR FOOTBALL, HOCKEY, RUGBY UNION TRAINING, TENNIS AND MULTI-SPORTS USE
    DIN EN ISO 12947-4:2007-04 Textiles - Determination of abrasion resistance of fabrics by the Martindale method - Part 4: Assessment of appearance change (ISO 12947-4:1998 + Cor. 1:2002) (includes Corrigendum AC:2006)
    DIN EN ISO 105-B08 E : 2010 TEXTILES - TESTS FOR COLOUR FASTNESS - PART B08: QUALITY CONTROL OF BLUE WOOL REFERENCE MATERIALS 1 TO 7
    DIN EN 12200-1:2016-10 PLASTICS RAINWATER PIPING SYSTEMS FOR ABOVE GROUND EXTERNAL USE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
    DIN EN 13138-2:2015-02 Buoyant aids for swimming instruction - Part 2: Safety requirements and test methods for buoyant aids to be held
    BS EN 15330-2:2017 Surfaces for sports areas. Synthetic turf and needle-punched surfaces primarily designed for outdoor use Specification for needle-punched surfaces for tennis and multi-sport surfaces
    UNE-EN 13245-1:2011 Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 1: Designation of PVC-U profiles
    BS EN 13199-3:2000 Packaging. Small load carrier systems Bond Stackable System (BSS)
    BS EN 12877-1:2000 Colouring materials in plastics. Determination of colour stability to heat during processing of colouring materials in plastics General introduction
    BS EN ISO 11378-2 : 2001 TEXTILE FLOOR COVERINGS - LABORATORY SOILING TESTS - PART 2: DRUM TEST
    BS EN ISO 12947-3 : 1999 TEXTILES - DETERMINATION OF THE ABRASION RESISTANCE OF FABRICS BY THE MARTINDALE METHOD - PART 3: DETERMINATION OF MASS LOSS
    ISO 105-B08:1995 Textiles — Tests for colour fastness — Part B08: Quality control of blue wool reference materials 1 to 7
    BS EN 13516:2002 FOOTWEAR - TEST METHODS FOR UPPERS, LINING AND INSOCKS - COLOUR FASTNESS TO RUBBING
    BS EN 15334:2007 Sanitary appliances. Methacrylic dispersions of high filler content
    BS EN ISO 16871:2003 PLASTICS PIPING AND DUCTING SYSTEMS - PLASTICS PIPES AND FITTINGS - METHOD FOR EXPOSURE TO DIRECT (NATURAL) WEATHERING
    BS EN 15115:2006 Textile floor coverings. Determination of sensitivity to spilled water
    ISO 12947-4:1998 Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 4: Assessment of appearance change
    BS EN 14877 : 2013 SYNTHETIC SURFACES FOR OUTDOOR SPORTS AREAS - SPECIFICATION
    BS EN 13138-3:2014 BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 3: SAFETY REQUIREMENTS AND TEST METHODS FOR SWIM SEATS TO BE WORN
    ISO 15703:1998 Leather Tests for colour fastness Colour fastness to mild washing
    EN 12200-1:2016 Plastics rainwater piping systems for above ground external use - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
    EN 13277-1:2000 Protective equipment for martial arts - Part 1: General requirements and test methods
    EN 13138-1:2014 Buoyant aids for swimming instruction - Part 1: Safety requirements and test methods for buoyant aids to be worn
    UNI EN 13138-2 : 2015 BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 2: SAFETY REQUIREMENTS AND TEST METHODS FOR BUOYANT AIDS TO BE HELD
    EN 13199-3:2000 Packaging - Small Load Carrier Systems - Part 3: Bond Stackable System (BSS)
    EN 13138-2:2014 BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 2: SAFETY REQUIREMENTS AND TEST METHODS FOR BUOYANT AIDS TO BE HELD
    EN 62329-2 : 2006 HEAT SHRINKABLE MOULDED SHAPES - PART 2: METHODS OF TEST
    EN 12608 : 2003 UNPLASTICIZED POLYVINYLCHLORIDE (PVC-U) PROFILES FOR THE FABRICATION OF WINDOWS AND DOORS - CLASSIFICATION, REQUIREMENTS AND TEST METHODS
    DIN EN 263:2008-06 Sanitary appliances - Crosslinked cast acrylic sheets for baths and shower trays for domestic purposes
    I.S. EN ISO 12947-4:1999 TEXTILES - DETERMINATION OF THE ABRASION RESISTANCE OF FABRICS BY THE MARTINDALE METHOD - PART 4: ASSESSMENT OF APPEARANCE CHANGE
    DIN EN ISO 105-B08:2010-02 Textiles - Tests for colour fastness - Part B08: Quality control of blue wool reference materials 1 to 7 (ISO 105-B08:1995 + Amd 1:2009) (includes Amendment A1:2009)
    DIN EN 12608-1:2016-08 UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR THE FABRICATION OF WINDOWS AND DOORS - CLASSIFICATION, REQUIREMENTS AND TEST METHODS - PART 1: NON-COATED PVC-U PROFILES WITH LIGHT COLOURED SURFACES
    DIN EN 15330-2:2017-09 SURFACES FOR SPORTS AREAS - SYNTHETIC TURF AND NEEDLE-PUNCHED SURFACES PRIMARILY DESIGNED FOR OUTDOOR USE - PART 2: SPECIFICATION FOR NEEDLE-PUNCHED SURFACES FOR TENNIS AND MULTI-SPORT SURFACES
    UNI EN 13138-1 : 2014 BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR BUOYANT AIDS TO BE WORN
    EN 13245-1:2010 Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 1: Designation of PVC-U profiles
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective
Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more