DIN EN 10216-2:2014-03
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
Hardcopy , PDF
15-05-2020
German, English
01-01-2014
This standard is included in DIN Handbook 15, 15-2, 403/1 and 403.
DevelopmentNote |
Supersedes DIN 17175 and DIN 17176. (08/2002) DRAFT AMD 1 issued in May 2018. (06/2018)
|
DocumentType |
Standard
|
Pages |
47
|
PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
Status |
Superseded
|
Standards | Relationship |
ONORM EN 10216-2 : 2014 | Identical |
BS EN 10216-2:2013 | Identical |
NBN EN 10216-2 : 2014 | Identical |
EN 10216-2:2013 | Identical |
NF EN 10216-2 : 2014 | Identical |
NEN EN 10216-2 : 2013 | Identical |
SN EN 10216-2 : 2014 | Identical |
UNE-EN 10216-2:2014 | Identical |
NS EN 10216-2 : 2013 | Identical |
UNI EN 10216-2 : 2014 | Identical |
I.S. EN 10216-2:2013 | Identical |
DIN 16282:2004-07 | SIPHONS FOR PRESSURE GAUGES AND THEIR ACCESSORIES |
BWB TL 7360-0045 : 2ED 2005 | |
DIN HDBK 15-2 : 12ED 2014 | STAHLROHRLEITUNGEN - BAND 2: ROHRE - TECHNISCHE LIEFERBEDINGUNGEN |
DIN HDBK 15 : 10ED 2005 | STEEL PIPELINES 1 - STANDARDS ON DIMENSIONS AND TECHNICAL DELIVERY CONDITIONS |
DIN 2876:2002-06 | FLANGED STEEL PIPES AND FLANGED STEEL FITTINGS GLASS LINED - TECHNICAL SPECIFICATIONS |
BWB TL 7310-0030 : 1ED 2005 | DRUCKKOCH-/DRUCKBRATKESSEL, CONTAINERKUECHE ISO 20 FUSZ, ZUCON FELDKUECHENCONTAINER ISO 20 FUSZ, RK |
DIN 21057-12:2015-07 (Draft) | PIPE CLASSES FOR PROCESS PLANTS - PART 12: TECHNICAL DELIVERY CONDITIONS FOR PIPE COMPONENTS OF NON ALLOYED AND ALLOYED STEEL WITH SPECIFIED PROPERTIES AT ELEVATED TEMPERATURES OF MATERIAL GROUP 1.2 AND 5.1 |
DIN 28179:2007-09 | STEEL U-TUBES FOR TUBULAR HEAT EXCHANGERS - TECHNICAL DELIVERY CONDITIONS |
DIN HDBK 403 : 4ED 2005 | IRON AND STEEL: QUALITY STANDARDS 3 - PRESSURE VESSELS AND PIPELINES - FINE GRAIN STEEL - STEEL WITH LOW TEMPERATURE TOUGHNESS - STEEL WITH ELEVATED TEMPERATURE PROPERTIES - STEEL FOR PRESSURE APPLICATIONS - CASTINGS AND FORGINGS |
DIN HDBK 403/1 : 6ED 2015 | IRON AND STEEL - QUALITY STANDARDS 3/1 - SEAMLESS AND WELDED STEEL TUBES FOR PRESSURE APPLICATIONS |
KTA 3507 : 2014(R2017) | FACTORY TESTS, POST-REPAIR TESTS AND CERTIFICATION OF SATISFACTORY PERFORMANCE IN SERVICE OF MODULES AND DEVICES FOR THE INSTRUMENTATION AND CONTROLS OF THE SAFETY SYSTEM |
KTA 3407 : 2014 | PIPE PENETRATIONS THROUGH THE REACTOR CONTAINMENT VESSEL |
DIN 28180:2007-09 | SEAMLESS STEEL TUBES FOR TUBULAR HEAT EXCHANGERS - DIMENSIONS AND MATERIALS |
DIN 30690-1:2016-04 | CONSTRUCTION ELEMENTS IN THE GAS SUPPLY SYSTEM - PART 1: REQUIREMENTS FOR CONSTRUCTION ELEMENTS IN GAS SUPPLY SYSTEMS |
DIN 19211:2004-02 | Measurement of fluid flow by means of pressure differential devices - Condensation chambers |
KTA 3702 : 2014(R2017) | EMERGENCY POWER GENERATING FACILITIES WITH DIESEL-GENERATOR UNITS IN NUCLEAR POWER PLANTS |
DIN 2559-2:2007-09 | EDGE PREPARATION FOR WELDING - PART 2: MATCHING OF INSIDE DIAMETER FOR CIRCUMFERENTIAL WELDS ON SEAMLESS PIPES |
DIN 30681:2013-12 | COMPENSATORS FOR GAS-INSTALLATIONS - EXPANSION JOINTS WITH STAINLESS STEEL BELLOWS UNIT - SAFETY REQUIREMENTS, TESTING, MARKING |
DIN 2413:2011-06 | SEAMLESS STEEL TUBES FOR OIL- AND WATER-HYDRAULIC SYSTEMS - CALCULATION RULES FOR PIPES AND ELBOWS FOR DYNAMIC LOADS |
DIN 19207:2004-02 | Measurement of fluid flow by means of pressure differential devices - Threaded pipe end and accessories |
DIN 21057-10:2015-07 (Draft) | PIPE CLASSES FOR PROCESS PLANTS - PART 10: TECHNICAL DELIVERY CONDITIONS FOR PIPE COMPONENTS OF NON-ALLOYED AND ALLOYED STEEL WITH SPECIFIED PROPERTIES AT ELEVATED TEMPERATURES OF MATERIAL GROUP 1.1 |
DIN V 4133:2007-07 | FREE-STANDING STEEL STACKS |
KTA 3205.2 : 2015 COR 2016 | COMPONENT SUPPORT STRUCTURES WITH NON-INTEGRAL CONNECTIONS - PART 2: COMPONENT SUPPORT STRUCTURES WITH NON-INTEGRAL CONNECTIONS FOR PRESSURE AND ACTIVITY-RETAINING COMPONENTS IN SYSTEMS OUTSIDE THE PRIMARY CIRCUIT |
KTA 3211.1 : 2015 | PRESSURE AND ACTIVITY RETAINING COMPONENTS OF SYSTEMS OUTSIDE THE PRIMARY CIRCUIT - PART 1: MATERIALS |
EN ISO 14284:2002 | Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996) |
EN 10052:1993 | Vocabulary of heat treatment terms for ferrous products |
ISO 10893-3:2011 | Non-destructive testing of steel tubes Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections |
ISO 8496:2013 | Metallic materials Tube Ring tensile test |
EN ISO 8493 : 2004 | Metallic materials - Tube - Drift-expanding test (ISO 8493:1998) |
EN 10027-2:2015 | DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM |
CEN/TR 10261:2013 | Iron and steel - European standards for the determination of chemical composition |
EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
ISO 9712:2012 | Non-destructive testing Qualification and certification of NDT personnel |
EN ISO 10893-10:2011 | Non-destructive testing of steel tubes - Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-10:2011) |
EN ISO 8495:2013 | Metallic materials - Tube - Ring-expanding test (ISO 8495:2013) |
ISO 10893-1:2011 | Non-destructive testing of steel tubes Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness |
EN ISO 377:2017 | Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017) |
ISO 10893-8:2011 | Non-destructive testing of steel tubes Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections |
EN ISO 8496:2013 | Metallic materials - Tube - Ring tensile test (ISO 8496:2013) |
ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
EN ISO 10893-3:2011 | Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-3:2011) |
EN ISO 10893-1:2011 | Non-destructive testing of steel tubes - Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness (ISO 10893-1:2011) |
EN 10168:2004 | Steel products - Inspection documents - List of information and description |
EN ISO 2566-1:1999 | Steel - Conversion of elongation values - Part 1: Carbon and low alloy steels (ISO 2566-1:1984) |
ISO 8493:1998 | Metallic materials Tube Drift-expanding test |
EN ISO 10893-8:2011 | Non-destructive testing of steel tubes - Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections (ISO 10893-8:2011) |
EN ISO 9712:2012 | Non-destructive testing - Qualification and certification of NDT personnel (ISO 9712:2012) |
ISO 148-1:2016 | Metallic materials — Charpy pendulum impact test — Part 1: Test method |
EN 10021:2006 | General technical delivery conditions for steel products |
ISO 2566-1:1984 | Steel Conversion of elongation values Part 1: Carbon and low alloy steels |
ISO 8495:2013 | Metallic materials Tube Ring-expanding test |
EN 10204:2004 | Metallic products - Types of inspection documents |
EN ISO 6892-2:2011 | Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature (ISO 6892-2:2011) |
ISO 11484:2009 | Steel products — Employer's qualification system for non-destructive testing (NDT) personnel |
EN 10027-1:2016 | Designation systems for steels - Part 1: Steel names |
ISO 8492:2013 | Metallic materials Tube Flattening test |
ISO 6892-2:2011 | Metallic materials Tensile testing Part 2: Method of test at elevated temperature |
EN 10020:2000 | Definition and classification of grades of steel |
EN ISO 8492:2013 | Metallic materials - Tube - Flattening test (ISO 8492:2013) |
EN ISO 148-1:2016 | Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016) |
EN 10266:2003 | Steel tubes, fittings and structural hollow sections - Symbols and definitions of terms for use in product standards |
EN 10220:2002 | Seamless and welded steel tubes - Dimensions and masses per unit length |
ISO 10893-10:2011 | Non-destructive testing of steel tubes Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections |
ISO 377:2017 | Steel and steel products — Location and preparation of samples and test pieces for mechanical testing |
ISO 14284:1996 | Steel and iron — Sampling and preparation of samples for the determination of chemical composition |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.