EN 1652:1997/AC:2003
Current
The latest, up-to-date edition.
COPPER AND COPPER ALLOYS - PLATE, SHEET, STRIP AND CIRCLES FOR GENERAL PURPOSES
17-12-2003
Foreword
1 Scope
2 Normative references
3 Definitions
3.1 plate
3.2 sheet
3.3 strip
3.4 circle
4 Designations
4.1 Material
4.2 Material condition
4.3 Product
5 Ordering information
6 Requirements
6.1 Composition
6.2 Mechanical properties
6.3 Grain size
6.4 Dimensions and tolerances
6.5 Edgewise curvature c
6.6 Surface condition
7 Sampling
7.1 General
7.2 Analysis
7.3 Tensile, hardness, grain size and technological
tests
8 Test methods
8.1 Analysis
8.2 Tensile test
8.3 Hardness test
8.4 Estimation of average grain size
8.5 Technological tests
8.6 Retests
8.7 Rounding of results
9 Declaration of conformity and inspection of documentation
9.1 Declaration of conformity
9.2 Inspection of documentation
10 Marking, packaging, labelling
Table 1 Composition of copper
Table 2 Composition of copper alloys
Table 3 Mechanical properties
Table 4 Tolerances on thickness of hot rolled products
(plate, sheet, strip and circles)
Table 5 Tolerances on thickness of cold rolled products
(sheet, strip and circles)
Table 6 Tolerances on width of cold rolled strip
Table 7 Tolerances on width of plate and sheet
Table 8 Tolerances on length of plate, sheet and strip
cut to length for lengths up to 5000 mm
Table 9 Squareness of cut plate and sheet
Table 10 Tolerances on diameter for circles
Table 11 Edgewise curvature
Annex A (informative) Bibliography
Defines the composition, property requirements and tolerances on dimensions and form for copper and copper alloy plate, sheet, strip and circles for general use.
Committee |
TC 133
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Current
|
Standards | Relationship |
DIN EN 1652:1998-03 | Identical |
UNE-EN 1652:1998 | Identical |
NS EN 1652 : 1ED 1998 | Identical |
NEN EN 1652 : 1998 C1 2007 | Identical |
PN EN 1652 : 1999 AC 2004 | Identical |
NBN EN 1652 : 1998 COR 2003 | Identical |
BS EN 1652:1998 | Identical |
SN EN 1652 : 1998 CORR 2004 | Identical |
UNI EN 1652 : 1999 | Identical |
NF EN 1652 : 1998 | Identical |
I.S. EN 1652:1998 | Identical |
UNE-EN 1652/AC:2004 | Identical |
14/30301257 DC : 0 | BS EN 13160-3 - LEAK DETECTION SYSTEMS - PART 3: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR LIQUID SYSTEMS FOR TANKS |
UNE-EN 50180-2:2015 | Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers - Part 2: Requirement for bushing components |
02/124462 DC : DRAFT DEC 2002 | BS EN 285 - STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS |
I.S. EN 1252-1:1998 | CRYOGENIC VESSELS - MATERIALS - PART 1: TOUGHNESS REQUIREMENTS FOR TEMPERATURES BELOW -80 DEGREE C |
BS EN 12693:2008 | Refrigerating systems and heat pumps. Safety and environmental requirements. Positive displacement refrigerant compressors |
07/30168082 DC : 0 | BS EN 1173 - COPPER AND COPPER ALLOYS - MATERIAL CONDITION DESIGNATION |
DD CEN/TS 13388:2008 | Copper and copper alloys. Compendium of compositions and products |
I.S. CEN ISO TR 20172:2006 | WELDING - GROUPING SYSTEMS FOR MATERIALS - EUROPEAN MATERIALS |
I.S. EN ISO 9226:2012 | CORROSION OF METALS AND ALLOYS - CORROSIVITY OF ATMOSPHERES - DETERMINATION OF CORROSION RATE OF STANDARD SPECIMENS FOR THE EVALUATION OF CORROSIVITY (ISO 9226:2012) |
BS EN 13611:2015 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels. General requirements |
DIN SPEC 9700 E : 2013 | COPPER AND COPPER ALLOYS - COMPENDIUM OF COMPOSITIONS AND PRODUCTS |
PD CEN/TS 13388:2015 | Copper and copper alloys. Compendium of compositions and products |
BS EN 12861:1999 | Copper and copper alloys. Scrap |
PD CEN/TR 14585-3:2017 | Corrugated metal hose assemblies for pressure applications Design method |
17/30360051 DC : 0 | BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
BS EN ISO 4126-2:2003 | Safety devices for protection against excessive pressure Bursting disc safety devices |
DIN EN 13599:2014-12 | COPPER AND COPPER ALLOYS - COPPER PLATE, SHEET AND STRIP FOR ELECTRICAL PURPOSES |
UNE-EN ISO 10380:2013 | Pipework - Corrugated metal hoses and hose assemblies (ISO 10380:2012) |
BS EN 1252-1:1998 | Cryogenic vessels. Materials Toughness requirements for temperatures below -80°C |
I.S. EN 13148:2010 | COPPER AND COPPER ALLOYS - HOT-DIP TINNED STRIP |
EN ISO 21028-1:2016 | Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 1: Temperatures below -80 °C (ISO 21028-1:2016) |
EN 1092-3:2003/AC:2007 | FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 3: COPPER ALLOY FLANGES |
EN 1173:2008 | Copper and copper alloys - Material condition designation |
EN 1252-1:1998/AC:1998 | CRYOGENIC VESSELS - MATERIALS - PART 1: TOUGHNESS REQUIREMENTS FOR TEMPERATURES BELOW -80 DEGREE C |
CEN/TR 17144:2017 | Resistance of metallic materials to liquid biogenic and alternative fuels and their blends |
EN 13160-3:2016 | Leak detection systems - Part 3: Requirements and test/assessment methods for liquid systems for tanks |
I.S. EN 12284:2003 | REFRIGERATING SYSTEMS AND HEAT PUMPS - VALVES - REQUIREMENTS, TESTING AND MARKING |
EN 12693:2008 | Refrigerating systems and heat pumps - Safety and environmental requirements - Positive displacement refrigerant compressors |
EN 50180-2:2015 | Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers - Part 2: Requirement for bushing components |
EN ISO 9226:2012 | Corrosion of metals and alloys - Corrosivity of atmospheres - Determination of corrosion rate of standard specimens for the evaluation of corrosivity (ISO 9226:2012) |
DIN CEN/TS 13388;DIN SPEC 9700:2013-05 | COPPER AND COPPER ALLOYS - COMPENDIUM OF COMPOSITIONS AND PRODUCTS |
BS EN ISO 9226:2012 | Corrosion of metals and alloys. Corrosivity of atmospheres. Determination of corrosion rate of standard specimens for the evaluation of corrosivity |
BS EN 50180-2:2015 | Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers Requirement for bushing components |
I.S. EN 50180-2:2015 | BUSHINGS ABOVE 1 KV UP TO 52 KV AND FROM 250 A TO 3,15 KA FOR LIQUID FILLED TRANSFORMERS - PART 2: REQUIREMENT FOR BUSHING COMPONENTS |
PREN 14986 : DRAFT 2014 | DESIGN OF FANS WORKING IN POTENTIALLY EXPLOSIVE ATMOSPHERES |
ONORM EN ISO 4126-2 : 2006 | SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 2: BURSTING DISC SAFETY DEVICES |
S.R. CEN/TS 13388:2015 | COPPER AND COPPER ALLOYS - COMPENDIUM OF COMPOSITIONS AND PRODUCTS |
ISO 9940:2015 | Aerospace series Fluid, hydraulic, phosphate ester-base, fire resistant Technical specification |
EN ISO 4126-2:2003/AC:2006 | SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 2: BURSTING DISC SAFETY DEVICES |
DIN EN 12284:2004-01 | Refrigerating systems and heat pumps - Valves - Requirements, testing and marking |
BS EN ISO 10380:2012 | Pipework. Corrugated metal hoses and hose assemblies |
UNE-EN ISO 4404-1:2012 | Petroleum and related products - Determination of the corrosion resistance of fire-resistant hydraulic fluids - Part 1: Water-containing fluids (ISO 4404-1:2012) |
ISO 4404-1:2012 | Petroleum and related products — Determination of the corrosion resistance of fire-resistant hydraulic fluids — Part 1: Water-containing fluids |
BS EN 13148:2010 | Copper and copper alloys. Hot-dip tinned strip |
BS EN 1462:2004 | Brackets for eaves gutters. Requirements and testing |
I.S. EN ISO 10380:2012 | PIPEWORK - CORRUGATED METAL HOSES AND HOSE ASSEMBLIES (ISO 10380:2012) |
I.S. EN 1462:2004 | BRACKETS FOR EAVES GUTTERS - REQUIREMENTS AND TESTING |
I.S. EN 1092-3:2003 | FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 3: COPPER ALLOY FLANGES |
DIN EN 13148:2010-12 | Copper and copper alloys - Hot-dip tinned strip |
I.S. EN ISO 4404-1:2012 | PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE CORROSION RESISTANCE OF FIRE-RESISTANT HYDRAULIC FLUIDS - PART 1: WATER-CONTAINING FLUIDS (ISO 4404-1:2012) |
DIN EN 1173:2008-08 | Copper and copper alloys - Material condition designation |
DIN EN 13611:2019-06 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements |
I.S. EN 13160-3:2016 | LEAK DETECTION SYSTEMS - PART 3: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR LIQUID SYSTEMS FOR TANKS |
I.S. EN 13599:2014 | COPPER AND COPPER ALLOYS - COPPER PLATE, SHEET AND STRIP FOR ELECTRICAL PURPOSES |
S.R. CEN/TR 17144:2017 | RESISTANCE OF METALLIC MATERIALS TO LIQUID BIOGENIC AND ALTERNATIVE FUELS AND THEIR BLENDS |
I.S. EN 1173:2008 | COPPER AND COPPER ALLOYS - MATERIAL CONDITION DESIGNATION |
I.S. EN 14986:2017 | DESIGN OF FANS WORKING IN POTENTIALLY EXPLOSIVE ATMOSPHERES |
12/30234431 DC : 0 | BS ISO 9940 - AEROSPACE - FIRE RESISTANT HYDRAULIC FLUIDS |
BS ISO 9940:2015 | Aerospace series. Fluid, hydraulic, phosphate ester-base, fire resistant. Technical specification |
UNI EN 12693 : 2008 | REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS |
14/30302298 DC : 0 | BS ISO 9940 - AEROSPACE SERIES - FLUID, HYDRAULIC, PHOSPHATE ESTER-BASE, FIRE RESISTANT - TECHNICAL SPECIFICATION |
02/710460 DC : DRAFT AUG 2002 | ISO/DIS 21028-1 - CRYOGENIC VESSELS - TOUGHNESS REQUIREMENTS FOR MATERIALS AT CRYOGENIC TEMPERATURE - PART 1: TEMPERATURES BELOW -80 DEGREES C |
12/30257022 DC : 0 | BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - GENERAL REQUIREMENTS |
CEN ISO/TR 20172:2009 | Welding - Grouping systems for materials - European materials (ISO/TR 20172:2009) |
17/30347443 DC : DRAFT JUN 2017 | BS EN 12480 - GAS METERS - ROTARY DISPLACEMENT GAS METERS |
14/30294092 DC : 0 | BS EN 14986 - DESIGN OF FANS WORKING IN POTENTIALLY EXPLOSIVE ATMOSPHERES |
PD CEN ISO/TR 20172:2009 | Welding. Grouping systems for materials. European materials |
UNI EN ISO 9226 : 2012 | CORROSION OF METALS AND ALLOYS - CORROSIVITY OF ATMOSPHERES - DETERMINATION OF CORROSION RATE OF STANDARD SPECIMENS FOR THE EVALUATION OF CORROSIVITY |
PD 6641:1999 | Copper and copper alloys. Compendium of compositions and products |
I.S. EN ISO 4126-2:2003 | SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 2: BURSTING DISC SAFETY DEVICES |
DIN EN 1462:2004-12 | Brackets for eaves gutters - Requirements and testing |
DIN EN 14436 E : 2004 | COPPER AND COPPER ALLOYS - ELECTROLYTICALLY TINNED STRIP |
BS EN 14436:2004 | Copper and copper alloys. Electrolytically tinned strip |
DIN EN ISO 4404-1:2012-10 | PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE CORROSION RESISTANCE OF FIRE-RESISTANT HYDRAULIC FLUIDS - PART 1: WATER-CONTAINING FLUIDS (ISO 4404-1:2012) |
DIN EN ISO 4404-1 E : 2012 | PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE CORROSION RESISTANCE OF FIRE-RESISTANT HYDRAULIC FLUIDS - PART 1: WATER-CONTAINING FLUIDS (ISO 4404-1:2012) |
UNI EN 13599 : 2014 | COPPER AND COPPER ALLOYS - COPPER PLATE, SHEET AND STRIP FOR ELECTRICAL PURPOSES |
UNI EN 1106 : 2010 | MANUALLY OPERATED TAPS FOR GAS BURNING APPLIANCES |
UNI EN ISO 10380 : 2012 | PIPEWORK - CORRUGATED METAL HOSES AND HOSE ASSEMBLIES |
UNI EN 1173 : 2008 | COPPER AND COPPER ALLOYS - MATERIAL CONDITION DESIGNATION |
UNI EN 1854 : 2010 | PRESSURE SENSING DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES |
UNI EN ISO 4404-1 : 2013 | PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE CORROSION RESISTANCE OF FIRE-RESISTANT HYDRAULIC FLUIDS - PART 1: WATER-CONTAINING FLUIDS |
UNI EN 13148 : 2010 | COPPER AND COPPER ALLOYS - HOT-DIP TINNED STRIP |
04/30076756 DC : DRAFT MAY 2004 | ISO 6505 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF TENDENCY TO ADHERE TO AND CORRODE METALS |
13/30290460 DC : 0 | BS ISO 9940 - AEROSPACE SERIES - FLUID, HYDRAULIC, PHOSPHATE ESTER-BASE, FIRE RESISTANT - TECHNICAL SPECIFICATION |
ISO 4126-2:2003 | Safety devices for protection against excessive pressure Part 2: Bursting disc safety devices |
15/30286859 DC : DRAFT JAN 2015 | BS EN ISO 21028-1 - CRYOGENIC VESSELS - TOUGHNESS REQUIREMENTS FOR MATERIALS AT CRYOGENIC TEMPERATURE - PART 1: TEMPERATURES BELOW -80 DEGREES C |
I.S. EN 12693:2008 | REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS |
S.R. CEN/TR 14585-3:2017 | CORRUGATED METAL HOSE ASSEMBLIES FOR PRESSURE APPLICATIONS - PART 3: DESIGN METHOD |
DIN EN 13611:2016-09 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
PREN 13611 : DRAFT 2017 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
DIN EN 12693:2016-10 (Draft) | REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS |
I.S. EN 13611:2015 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
EN 12861:2018 | Copper and copper alloys - Scrap |
EN 12480:2018 | Gas meters - Rotary displacement gas meters |
S.R. CEN ISO TR 20172:2009 | WELDING - GROUPING SYSTEMS FOR MATERIALS - EUROPEAN MATERIALS |
I.S. EN 12480:2018 | GAS METERS - ROTARY DISPLACEMENT GAS METERS |
I.S. EN 12861:1999 | COPPER AND COPPER ALLOYS - SCRAP |
I.S. CEN TS 13388:2004 | COPPER AND COPPER ALLOYS - COMPENDIUM OF COMPOSITIONS AND PRODUCTS |
DIN EN 1092-3:2004-10 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 3: Copper alloy flanges; German version EN 1092-3:2003 + AC:2004 |
UNE-CEN/TS 13388:2010 EX | Copper and copper alloys - Compendium of compositions and products |
BS EN 12284:2003 | Refrigerating systems and heat pumps. Valves. Requirements, testing and marking |
BS EN 1759-3:2003 | Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, class designated Copper alloy flanges |
BS EN 14986:2007 | Design of fans working in potentially explosive atmospheres |
ISO 21028-1:2016 | Cryogenic vessels Toughness requirements for materials at cryogenic temperature Part 1: Temperatures below -80 degrees C |
UNE-EN 13148:2012 | Copper and copper alloys - Hot-dip tinned strip |
ISO 10380:2012 | Pipework — Corrugated metal hoses and hose assemblies |
UNE-EN 13160-3:2017 | Leak detection systems - Part 3: Requirements and test/assessment methods for liquid systems for tanks |
UNE-EN 14986:2017 | Design of fans working in potentially explosive atmospheres |
BS EN 13599:2014 | Copper and copper alloys. Copper plate, sheet and strip for electrical purposes |
CEN/TS 13388:2015 | Copper and copper alloys - Compendium of compositions and products |
ISO 9226:2012 | Corrosion of metals and alloys — Corrosivity of atmospheres — Determination of corrosion rate of standard specimens for the evaluation of corrosivity |
BS EN 1092-3:2003 | Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, PN designated Copper alloy flanges |
EN ISO 10380:2012 | Pipework - Corrugated metal hoses and hose assemblies (ISO 10380:2012) |
EN 14986:2017 | Design of fans working in potentially explosive atmospheres |
EN 13599:2014 | Copper and copper alloys - Copper plate, sheet and strip for electrical purposes |
EN 1462:2004 | Brackets for eaves gutters - Requirements and testing |
EN 14436:2004 | Copper and copper alloys - Electrolytically tinned strip |
EN 1759-3:2003/AC:2004 | FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, CLASS DESIGNATED - PART 3: COPPER ALLOY FLANGES |
EN ISO 4404-1:2012 | Petroleum and related products - Determination of the corrosion resistance of fire-resistant hydraulic fluids - Part 1: Water-containing fluids (ISO 4404-1:2012) |
DIN EN ISO 9226:2012-05 | Corrosion of metals and alloys - Corrosivity of atmospheres - Determination of corrosion rate of standard specimens for the evaluation of corrosivity (ISO 9226:2012) |
PREN 13160-3 : DRAFT 2014 | LEAK DETECTION SYSTEMS - PART 3: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR LIQUID SYSTEMS FOR TANKS |
CEN/TR 14585-3:2017 | Corrugated metal hose assemblies for pressure applications - Part 3: Design method |
UNE-EN ISO 21028-1:2017 | Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 1: Temperatures below -80 °C (ISO 21028-1:2016) |
PD CEN/TR 17144:2017 | Resistance of metallic materials to liquid biogenic and alternative fuels and their blends |
S.R. CEN ISO/TR 20172:2021 | Welding - Grouping systems for materials - European materials (ISO/TR 20172:2021) |
14/30301109 DC : 0 | BS EN 50180-2 - BUSHINGS ABOVE 1 KV UP TO 52 KV AND FROM 250 A TO 3,15 KA FOR LIQUID FILLED TRANSFORMERS - PART 2: REQUIREMENT FOR BUSHING COMPONENTS |
BS EN ISO 21028-1:2016 | Cryogenic vessels. Toughness requirements for materials at cryogenic temperature Temperatures below -80 °C |
I.S. EN ISO 21028-1:2016 | CRYOGENIC VESSELS - TOUGHNESS REQUIREMENTS FOR MATERIALS AT CRYOGENIC TEMPERATURE - PART 1: TEMPERATURES BELOW -80 DEGREES C (ISO 21028-1:2016) |
DIN CEN/TS 13388 E : 2013 | COPPER AND COPPER ALLOYS - COMPENDIUM OF COMPOSITIONS AND PRODUCTS |
UNI EN ISO 4126-2 : 2003 | SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - BURSTING DISC SAFETY DEVICES |
UNE-EN 13611:2016 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements |
EN 13611:2015/AC:2016 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
DIN EN 1759-3:2004-10 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 3: Copper alloy flanges; German version EN 1759-3:2003 + AC:2004 |
DIN EN ISO 10380:2013-02 | Pipework - Corrugated metal hoses and hose assemblies (ISO 10380:2012) |
BS EN ISO 4404-1:2012 | Petroleum and related products. Determination of the corrosion resistance of fire-resistant hydraulic fluids Water-containing fluids |
BS EN 13160-3:2003 | Leak detection systems Liquid systems for tanks |
BS EN 1173:2008 | Copper and copper alloys. Material condition designation |
ISO/TR 20172:2009 | Welding Grouping systems for materials European materials |
DIN EN 12693:2008-09 | REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS |
EN 13148 : 2010 | COPPER AND COPPER ALLOYS - HOT-DIP TINNED STRIP |
EN 12284 : 2003 | REFRIGERATING SYSTEMS AND HEAT PUMPS - VALVES - REQUIREMENTS, TESTING AND MARKING |
I.S. EN 13611:2015/AC:2016 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
DIN EN 14436:2004-11 | Copper and copper alloys - Electrolytically tinned strip |
ISO 6507-1:2005 | Metallic materials Vickers hardness test Part 1: Test method |
EN 1655:1997 | Copper and copper alloys - Declarations of conformity |
EN 10002-1 : 2001 | METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE |
EN 1412:2016 | Copper and copper alloys - European numbering system |
ISO 1190-1:1982 | Copper and copper alloys Code of designation Part 1: Designation of materials |
ISO 2624:1990 | Copper and copper alloys Estimation of average grain size |
ISO 8490:1986 | Metallic materials Sheet and strip Modified Erichsen cupping test |
ISO 6507-2:2005 | Metallic materials Vickers hardness test Part 2: Verification and calibration of testing machines |
ISO 1811-2:1988 | Copper and copper alloys Selection and preparation of samples for chemical analysis Part 2: Sampling of wrought products and castings |
ISO 7799:1985 | Metallic materials — Sheet and strip 3 mm thick or less — Reverse bend test |
EN ISO 9002:1994/AC:1997 | QUALITY SYSTEMS - SPECIFICATION FOR PRODUCTION AND INSTALLATION |
ISO 197-3:1983 | Copper and copper alloys Terms and definitions Part 3: Wrought products |
EN 1653:1997/A1:2000 | COPPER AND COPPER ALLOYS - PLATE, SHEET AND CIRCLES FOR BOILERS, PRESSURE VESSELS AND HOT WATER STORAGE UNITS |
ISO 9002:1994 | Quality systems — Model for quality assurance in production, installation and servicing |
EN 1173:2008 | Copper and copper alloys - Material condition designation |
ISO 31-0:1992 | Quantities and units Part 0: General principles |
ISO 7438:2016 | Metallic materials Bend test |
EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
EN ISO 2624:1995 | Copper and copper alloys - Estimation of average grain size (ISO 2624:1990) |
EN 10204:2004 | Metallic products - Types of inspection documents |
ISO 9001:2015 | Quality management systems — Requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.