I.S. EN 13108-20:2016
Current
Current
The latest, up-to-date edition.
BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 20: TYPE TESTING
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
01-01-2016
Publisher
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
National foreword
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements for Type Testing
5 Constituent materials
6 Bituminous Mixtures
7 Type Test Report
Annex A (normative) - Properties and test methods
for constituent materials
Annex B (normative) - Summary of properties and
test methods for bituminous mixtures
Annex C (normative) - Methods of specimen preparation
Annex D (normative) - Test procedures and conditions
Annex E (informative) - Special requirements for airfields
Defines the Type Testing procedure for use in Assessment and Verification of the Constancy of Performance (AVCP) of bituminous mixtures for use in roads, airfields and other trafficked areas.
| DevelopmentNote |
2006 Edition along with its corrigendum is still active & available until the European Commission directive update their references to the New Edition. (03/2017)
|
| DocumentType |
Standard
|
| Pages |
38
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| DIN EN 13108-20:2013-06 (Draft) | Identical |
| NEN EN 13108-20 : 2016 | Identical |
| NF EN 13108-20 : 2017 | Identical |
| EN 13108-20:2016 | Identical |
| NBN EN 13108-20 : 2016 | Identical |
| NS EN 13108-20 : 2006 | Identical |
| UNE-EN 13108-20:2007 | Identical |
| BS EN 13108-20:2016 | Identical |
| UNI EN 13108-20 : 2006 | Identical |
| S.R. 28:2009 | RECOMMENDATION FOR THE USE AND IMPLEMENTATION OF THE I.S. EN 13108 SERIES BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS |
| EN 1426:2015 | Bitumen and bituminous binders - Determination of needle penetration |
| EN 12697-2:2015 | BITUMINOUS MIXTURES - TEST METHODS - PART 2: DETERMINATION OF PARTICLE SIZE DISTRIBUTION |
| EN 12697-12:2008 | Bituminous mixtures - Test methods for hot mix asphalt - Part 12: Determination of the water sensitivity of bituminous specimens |
| EN 13108-4:2016/AC:2017 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 4: HOT ROLLED ASPHALT |
| EN 12697-1 : 2012 COR 2012 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 1: SOLUBLE BINDER CONTENT |
| EN 12697-43:2014 | Bituminous mixtures - Test methods for hot mix asphalt - Part 43: Resistance to fuel |
| EN 12697-34:2012 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 34: MARSHALL TEST |
| EN 12697-30:2012 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 30: SPECIMEN PREPARATION BY IMPACT COMPACTOR |
| EN 932-3:1996/A1:2003 | TESTS FOR GENERAL PROPERTIES OF AGGREGATES - PART 3: PROCEDURE AND TERMINOLOGY FOR SIMPLIFIED PETROGRAPHIC DESCRIPTION |
| EN 12697-46 : 2012 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 46: LOW TEMPERATURE CRACKING AND PROPERTIES BY UNIAXIAL TENSION TESTS |
| EN 12697-8:2003 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 8: DETERMINATION OF VOID CHARACTERISTICS OF BITUMINOUS SPECIMENS |
| EN 12697-22:2003+A1:2007 | Bituminous mixtures - Test methods for hot mix asphalt - Part 22: Wheel tracking |
| EN 12697-6:2012 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 6: DETERMINATION OF BULK DENSITY OF BITUMINOUS SPECIMENS |
| EN 13108-5:2016 | Bituminous mixtures - Material specifications - Part 5: Stone Mastic Asphalt |
| EN 12596:2014 | Bitumen and bituminous binders - Determination of dynamic viscosity by vacuum capillary |
| EN 12697-11:2012 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 11: DETERMINATION OF THE AFFINITY BETWEEN AGGREGATE AND BITUMEN |
| EN 1427:2015 | Bitumen and bituminous binders - Determination of the softening point - Ring and Ball method |
| EN 12697-25:2016 | Bituminous mixtures - Test methods - Part 25: Cyclic compression test |
| EN 13043:2002/AC:2004 | AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS FOR ROADS, AIRFIELDS AND OTHER TRAFFICKED AREAS |
| EN 12697-17:2017 | Bituminous mixtures - Test methods - Part 17: Particle loss of porous asphalt specimens |
| EN 12697-41:2013 | Bituminous mixtures - Test methods for hot mix asphalt - Part 41: Resistance to de-icing fluids |
| EN 933-10:2009 | Tests for geometrical properties of aggregates - Part 10: Assessment of fines - Grading of filler aggregates (air jet sieving) |
| EN 12697-19:2012 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 19: PERMEABILITY OF SPECIMEN |
| EN 12697-21:2012 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 21: INDENTATION USING PLATE SPECIMENS |
| EN 12697-39:2012 | Bituminous mixtures - Test methods for hot mix asphalt - Part 39: Binder content by ignition |
| EN 13924-2:2014 | Bitumen and bituminous binders - Specification framework for special paving grade bitumen - Part 2: Multigrade paving grade bitumens |
| EN 13108-8:2016 | Bituminous mixtures - Material specifications - Part 8: Reclaimed asphalt |
| EN 12697-45 : 2012 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 45: SATURATION AGEING TENSILE STIFFNESS (SATS) CONDITIONING TEST |
| EN 12697-26:2012 | Bituminous mixtures - Test methods for hot mix asphalt - Part 26: Stiffness |
| EN 933-1:2012 | Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method |
| EN 12697-20:2012 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 20: INDENTATION USING CUBE OR CYLINDRICAL SPECIMENS (CY) |
| EN 13108-1:2016 | Bituminous mixtures - Material specifications - Part 1: Asphalt Concrete |
| EN 12697-33:2003+A1:2007 | Bituminous mixtures - Test methods for hot mix asphalt - Part 33: Specimen prepared by roller compactor |
| EN 13108-7:2016 | Bituminous mixtures - Material specifications - Part 7: Porous Asphalt |
| EN 12697-18:2017 | Bituminous mixtures - Test methods - Part 18: Binder drainage |
| EN 12697-24:2012 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 24: RESISTANCE TO FATIGUE |
| EN 13108-3:2016 | Bituminous mixtures - Material specifications - Part 3: Soft Asphalt |
| EN 12697-31:2007 | Bituminous mixtures - Test methods for hot mix asphalt - Part 31: Specimen preparation by gyratory compactor |
| EN 12697-3:2013 | Bituminous mixtures - Test methods for hot mix asphalt - Part 3: Bitumen recovery: Rotary evaporator |
| EN 12697-49:2014 | Bituminous mixtures - Test methods for hot mix asphalt - Part 49: Determination of friction after polishing |
| EN 13108-21:2016 | Bituminous mixtures - Material specifications - Part 21: Factory Production Control |
| EN 12697-16:2016 | Bituminous mixtures - Test methods - Part 16: Abrasion by studded tyres |
| EN 13924-1:2015 | Bitumen and bituminous binders - Specification framework for special paving grade bitumen - Part 1: Hard paving grade bitumens |
| EN 13108-6:2016 | Bituminous mixtures - Material specifications - Part 6: Mastic Asphalt |
| EN 14023:2010 | Bitumen and bituminous binders - Specification framework for polymer modified bitumens |
| EN 1097-7:2008 | Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method |
| EN 1097-6:2013 | Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption |
| EN 12591:2009 | Bitumen and bituminous binders - Specifications for paving grade bitumens |
| EN 12697-32:2003+A1:2007 | Bituminous mixtures - Test methods for hot mix asphalt - Part 32: Laboratory compaction of bituminous mixtures by vibratory compactor |
| EN 12697-44:2010 | Bituminous mixtures - Test methods for hot mix asphalt - Part 44: Crack propagation by semi-circular bending test |
| EN 12697-4:2015 | Bituminous mixtures - Test methods - Part 4: Bitumen recovery: Fractionating column |
| EN 13108-2:2016 | Bituminous mixtures - Material specifications - Part 2: Asphalt Concrete for Very Thin Layers (BBTM) |
| EN 13108-9:2016 | Bituminous mixtures - Material specifications - Part 9: Asphalt for Ultra-Thin Layer (AUTL) |
| EN 12697-35:2016 | Bituminous mixtures - Test methods - Part 35: Laboratory mixing |
| EN 12595:2014 | Bitumen and bituminous binders - Determination of kinematic viscosity |
£48.50
Excluding VAT
GBP
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.