BS 7400(1991) : 1991 AMD 7672
|
SPECIFICATION FOR ALTERNATING CURRENT STATIC WATT-HOUR METERS FOR ACTIVE ENERGY (CLASSES 1 AND 2)
|
BS EN 60687:1993
|
Specification for alternating current static watt-hour meters for active energy (classes 0,2 S and 0,5 S)
|
SAE J 1876 : 2012
|
PLASTIC DUST SHIELD FOR HYDRAULIC DISC BRAKES
|
ASTM F 1173 : 2001
|
Standard Specification for Thermosetting Resin Fiberglass Pipe Systems to Be Used for Marine Applications
|
97/713392 DC : DRAFT AUG 1997
|
PREN 4243 - AEROSPACE SERIES - ACRYLIC (PMMA) SHEETS - TECHNICAL SPECIFICATION
|
12/30192217 DC
|
BS ISO 12856. Plastic railway sleepers (railroad ties)
|
ASTM F 1173 : 2001 : R2006
|
Standard Specification for Thermosetting Resin Fiberglass Pipe Systems to Be Used for Marine Applications
|
PREN 2719 : 200P1
|
AEROSPACE SERIES - POLYCARBONATE SHEET - TECHNICAL SPECIFICATION
|
PREN 4243 : 200P1
|
AEROSPACE SERIES - CAST ACRYLIC SHEETS - TECHNICAL SPECIFICATION
|
IEC 60687:1992
|
Alternating current static watt-hour meters for active energy (classes 0,2 S and 0,5 S)
|
EN 16129:2013
|
Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150 kg/h, associated safety devices and adaptors for butane, propane, and their mixtures
|
EN 60687:1992/corrigendum:1993
|
ALTERNATING CURRENT STATIC WATT HOUR METERS FOR ACTIVE ENERGY (CLASSES 0.2S AND 0.5S)
|
EN 12864:2001/A3:2009
|
LOW-PRESSURE, NON ADJUSTABLE REGULATORS HAVING A MAXIMUM OUTLET PRESSURE OF LESS THAN OR EQUAL TO 200 MBAR, WITH A CAPACITY OF LESS THAN OR EQUAL TO 4 KG/H, AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES
|
BS 5664-2.1(1979) : 1979
|
SOLVENTLESS POLYMERISABLE RESINOUS COMPOUNDS USED FOR ELECTRICAL INSULATION - METHODS OF TEST
|
I.S. EN ISO 14692-2:2017
|
PETROLEUM AND NATURAL GAS INDUSTRIES - GLASS-REINFORCED PLASTICS (GRP) PIPING - PART 2: QUALIFICATION AND MANUFACTURE (ISO 14692-2:2017)
|
97/713394 DC : DRAFT AUG 1997
|
PREN 4365 - AEROSPACE STANDARD - HEAT AND CRAZING RESISTANT ACRYLIC - CAST AND CROSS LINKED - LOW MOISTURE ABSORPTION - PROPERTIES
|
I.S. EN 12864:2001
|
LOW-PRESSURE, NON-ADJUSTABLE REGULATORS HAVING A MAXIMUM OUTLET PRESSURE OF LESS THAN OR EQUAL TO 200 MBAR, WITH A CAPACITY OF LESS THAN OR EQUAL TO 4 KG/H, AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES
|
BS 771-1:1980
|
Phenolic moulding materials Specification for physical properties (excluding type L2 material)
|
ASTM F 1173 : 2001 : R2012
|
Standard Specification for Thermosetting Resin Fiberglass Pipe Systems to Be Used for Marine Applications
|
DIN 16945:1989-03
|
REACTION RESINS - REACTANTS AND REACTION MOULDING MATERIALS - TEST METHODS
|
DIN 16946-1:1989-03
|
Cured casting resins; testing
|
DIN EN 60687 : 1994
|
ALTERNATING-CURRENT STATIC WATT-HOUR METERS FOR ACTIVE ENERGY (CLASSES 0.2 S AND 0.5 S)
|
SAE J 1875 : 2001
|
MATERIALS FOR PLASTIC CHECK VALVES FOR VACUUM BOOSTER SYSTEMS
|
ISO 8606:1990
|
Plastics — Prepregs — Bulk moulding compound (BMC) and dough moulding compound (DMC) — Basis for a specification
|
DIN EN 12864:2006-03
|
LOW-PRESSURE, NON ADJUSTABLE REGULATORS HAVING A MAXIMUM OUTLET PRESSURE OF LESS THAN OR EQUAL TO 200 MBAR, WITH A CAPACITY OF LESS THAN OR EQUAL TO 4 KG/H, AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES
|
DIN EN 12864 E : 2006 AMD 3 2010
|
LOW PRESSURE, NON ADJUSTABLE REGULATORS HAVING A MAXIMUM OUTLET PRESSURE OF LESS THAN OR EQUAL TO 200 MBAR, WITH A CAPACITY OF LESS THAN OR EQUAL TO 4 KG/H, AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES
|
BS 2782-5:Method 552A:1999
|
Methods of testing plastics. Optical and colour properties, weathering Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or laboratory light sources
|
BS 3412:1992
|
Methods of specifying general purpose polyethylene materials for moulding and extrusion
|
BS 4936:1987
|
Method of specifying styrene-acrylonitrile (SAN) moulding and extrusion materials
|
BS 1493:1987
|
Method of specifying general purpose polystyrene (PS) moulding and extrusion materials
|
ASME PCC 2 : 2015
|
REPAIR OF PRESSURE EQUIPMENT AND PIPING
|
97/713393 DC : DRAFT AUG 1997
|
PREN 4364 - AEROSPACE STANDARD - CAST (PMMA) ACRYLIC - PROPERTIES
|
BS 2782-1 Methods 121A to 121C:1976
|
Methods of testing plastics. Thermal properties Determination of temperature of deflection under a bending stress of 1.8 MPa, of plastics and ebonite. Determination of temperature of deflection under a bending stress of 0.45 MPa, of plastics and ebonite. Determination of temperature of deflection under a bending stress, of rigid thermosetting resin bonded laminated sheet
|
97/713388 DC : DRAFT AUG 1997
|
PREN 2719 - AEROSPACE SERIES - POLYCARBONATE SHEET - TECHNICAL SPECIFICATION
|
UNE-EN 16129:2014
|
Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150 kg/h, associated safety devices and adaptors for butane, propane, and their mixtures
|
ASTM D 4203 : 2017 : REDLINE
|
Standard Specification for and Basis for Specifications for Styrene-Acrylonitrile (SAN) Injection and Extrusion Materials
|
ASTM D 5936 : 1996
|
Specification for Multipurpose Test Specimens (Withdrawn 1998)
|
ASTM F 1173 : 2001 : R2018
|
Standard Specification for Thermosetting Resin Fiberglass Pipe Systems to Be Used for Marine Applications
|
ISO 14692-2:2017
|
Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 2: Qualification and manufacture
|
UNI EN 12864 : 2010
|
LOW-PRESSURE, NON ADJUSTABLE REGULATORS HAVING A MAXIMUM OUTLET PRESSURE OF LESS THAN OR EQUAL TO 200 MBAR, WITH A CAPACITY OF LESS THAN OR EQUAL TO 4 KG/H, AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES
|
UNI EN 16129 : 2013
|
PRESSURE REGULATORS, AUTOMATIC CHANGE-OVER DEVICES, HAVING A MAXIMUM REGULATED PRESSURE OF 4 BAR, WITH A MAXIMUM CAPACITY OF 150 KG/H, ASSOCIATED SAFETY DEVICES AND ADAPTORS FOR BUTANE, PROPANE, AND THEIR MIXTURES
|
DIN 16946-2:1989-03
|
Cured casting resins; types
|
I.S. EN 16129:2013
|
PRESSURE REGULATORS, AUTOMATIC CHANGEOVER DEVICES, HAVING A MAXIMUM REGULATED PRESSURE OF 4 BAR, WITH A MAXIMUM CAPACITY OF 150 KG/H, ASSOCIATED SAFETY DEVICES AND ADAPTORS FOR BUTANE, PROPANE, AND THEIR MIXTURES
|
BIS IS 10322-1 : 2014
|
LUMINAIRES - PART 1: GENERAL REQUIREMENTS AND TESTS
|
EN ISO 14692-2:2017
|
Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 2: Qualification and manufacture (ISO 14692-2:2017)
|
ISO 9054:1990
|
Cellular plastics, rigid — Test methods for self-skinned, high-density materials
|
ISO 4613-2:1995
|
Plastics Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
|
BS EN 12864 : 2001
|
LOW-PRESSURE, NON ADJUSTABLE REGULATORS HAVING A MAXIMUM OUTLET PRESSURE OF LESS THAN OR EQUAL TO 200 MBAR, WITH A CAPACITY OF LESS THAN OR EQUAL TO 4 KG/H, AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES
|
BS EN ISO 9054:1999
|
Cellular plastics, rigid. Test methods for self-skinned high-density materials
|
EN ISO 9054 : 1999
|
CELLULAR PLASTICS, RIGID - TEST METHODS FOR SELF-SKINNED, HIGH-DENSITY MATERIALS
|
BS EN 16129:2013
|
Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150 kg/h, associated safety devices and adaptors for butane, propane, and their mixtures
|
DIN EN 16129:2013-08
|
Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150kg/h, associated safety devices and adaptors for butane, propane, and their mixtures
|
ABS 0063 : 2018 COR 2018
|
RULES FOR BUILDING AND CLASSING FACILITIES ON OFFSHORE INSTALLATIONS
|
BS EN 61038:1993
|
Specification for time switches for tariff and load control
|
BS 2782-9 Method 931A:1988
|
Methods of testing plastics. Sampling and test specimen preparation Preparation and use of multipurpose test specimens
|
BS 3126:1987
|
Method of specifying toughened polystyrene (SB) moulding and extrusion materials
|
BS 4935:1989
|
Method of specifying acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials
|