|
SAE AS 60491 : 2015
|
SLEEVE, PROTECTION, FOR CABLE AND HARNESS PROTECTION |
|
MIL-PRF-32517 Base Document:2015
|
SPLICE, CONDUCTOR, ELECTRICAL, COAXIAL CABLE, MATCHED IMPEDANCE, GENERAL SPECIFICATION FOR |
|
17/30371343 DC : 0
|
BS EN 4688 - AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATED TWO COMPONENT COLD CURING EPOXY PRIMER - HIGH CORROSION RESISTANCE FOR MILITARY APPLICATION |
|
SAE AS 81914 : 2016
|
TUBING, PLASTIC, FLEXIBLE, CONVOLUTED, CONDUIT, GENERAL SPECIFICATION FOR |
|
NASA RPTSTD 8070 0001 : 2010 CHANGE 2 2013
|
SURFACE CLEANLINESS STANDARD OF FLUID SYSTEMS FOR ROCKET ENGINE TEST FACILITIES OF THE NASA ROCKET PROPULSION TEST PROGRAM |
|
MIL-DTL-83054 Revision C:2003
|
BAFFLE AND INERTING MATERIAL, AIRCRAFT FUEL TANK |
|
MIL-DTL-32480 Base Document:2014
|
ADAPTER, HYDRAULIC AND PNEUMATIC, FLARELESS TUBE FITTING TO ORFS CONNECTORS, 1500 TO 3000 PSI AND -65 DEGREES F TO 250 DEGREES F, GENERAL SPECIFICATION FOR |
|
MIL-DTL-5515 Revision F:2013
|
PUMP, HYDRAULIC, RAM, HAND DRIVEN |
|
MIL-PRF-46846 Revision D:2013
|
Rubber, Synthetic, Heat - Shrinkable |
|
MIL-PRF-32104 Base Document:2010
|
MOBILE HYDRAULIC OIL DISPENSER |
|
MIL-STD-290 Revision H:2013
|
PACKAGING AND MARKING OF PETROLEUM AND RELATED PRODUCTS |
|
MIL-DTL-8815-31 Base Document:2009
|
FILTER ELEMENTS, NON-CLEANABLE, FLUID PRESSURE, HYDRAULIC LINE, 3,000 PSI, 5 MICRON ABSOLUTE, -65 DEGREES F TO 275 DEGREES F |
|
UNI EN 4689 : 2013
|
AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENTS COLD CURING POLYURETHANE FINISH - HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION |
|
UNI EN 4687 : 2013
|
AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE NON CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION |
|
SAE AIR 810 : 2013
|
DEGRADATION LIMITS OF HYDROCARBON-BASED HYDRAULIC FLUIDS, MIL-PRF-5606, MIL-PRF-83282, AND MIL-PRF-87257 USED IN HYDRAULIC TEST STANDS |
|
MIL-DTL-32372 Revision A:2016
|
FITTING, ADAPTER, HYDRAULIC AND PNEUMATIC, NPTF TO ORFS CONNECTORS, 1500 TO 3000 PSI AND -65 DEGREES F TO 250 DEGREES F |
|
NF EN 3155-069 : 2009
|
AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 069: CONTACTS, ELECTRICAL, COAXIAL, SIZE 16, FEMALE, TYPE D, SOLDER, CLASS P - PRODUCT STANDARD |
|
BS EN 4687:2012
|
AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE NON CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION |
|
MIL-DTL-85052 Revision B:2005
|
CLAMP, LOOP, CUSHION, GENERAL SPECIFICATION FOR |
|
NF EN 3155-067 : 2009
|
AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 067: CONTACTS, ELECTRICAL, COAXIAL, SIZE 08, MALE, TYPE D, SOLDER, CLASS R - PRODUCT STANDARD |
|
MIL-PRF-83383 Revision F:2017
|
CIRCUIT BREAKERS, REMOTE CONTROL, THERMAL, TRIP FREE, GENERAL SPECIFICATION FOR |
|
09/30210064 DC : DRAFT SEP 2009
|
BS EN 4531-001 - AEROSPACE SERIES - CONNECTORS, OPTICAL, CIRCULAR, SINGLE AND MULTIPIN, COUPLED BY THREADED RING - FLUSH CONTACTS - PART 001: TECHNICAL SPECIFICATION |
|
UNI EN 4688 : 2013
|
AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION |
|
BS EN 3155-067:2009
|
AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 067: CONTACTS, ELECTRICAL, COAXIAL, SIZE 08, MALE, TYPE D, SOLDER, CLASS R - PRODUCT STANDARD |
|
MIL-DTL-32554 Base Document:2016
|
STRAPS, TIE-DOWN, ADJUSTABLE, NON-METALLIC, CABLE BUNDLING, GENERAL SPECIFICATION FOR |
|
MIL-DTL-22992 Revision H:2015
|
Connectors, Plugsand Receptacles, Electrical, Waterproof, Quick Disconnect, Heavy Duty Type, General Specification for |
|
SAE AS 595 : 2015
|
AEROSPACE - CIVIL TYPE VARIABLE DELIVERY, PRESSURE COMPENSATED, HYDRAULIC PUMP |
|
SAE AS 23053 : 2016
|
INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, GENERAL SPECIFICATION FOR |
|
PREN 4689 : 200P1
|
AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENTS COLD CURING POLYURETHANE FINISH - HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION |
|
PREN 3155-067 : 200P1
|
AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 067: CONTACTS, ELECTRICAL, COAXIAL, SIZE 08, MALE, TYPE D, SOLDER, CLASS R - PRODUCT STANDARD |
|
SAE AS 5951 : 2017
|
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA-ARAMID REINFORCED, 5080 PSI (35,000 KPA), 275 DEGREES F (135 DEGREES C), AIRCRAFT HYDRAULIC SYSTEMS |
|
ISO 11171:2016
|
Hydraulic fluid power Calibration of automatic particle counters for liquids |
|
SAE AS 23190 : 2015
|
WIRING, POSITIONING, AND SUPPORT ACCESSORIES |
|
SAE AS 83485 : 2016
|
O-RING MOLDED FROM AMS7287 MATERIAL |
|
SAE AS 1946 : 2015
|
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, UP TO 1500 PSI AND 450 DEGREES F, HYDRAULIC AND PNEUMATIC |
|
BS EN 3155-039:2007
|
Aerospace series. Electrical contacts used in elements of connection Contacts, electrical, coaxial, size 16, female, type D, solder, class R. Product standard |
|
MIL-DTL-83797 Revision C:2008
|
HOSE, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, GENERAL SPECIFICATION FOR |
|
MIL-DTL-27272 Revision D:2015
|
Fittings, Polytetrafluoroethylene Hose, High-Temperature, Medium-Pressure, General Specification for |
|
MIL-PRF-8805-100 Revision G:2012
|
Switches, Sensitive, Plunger, 10 Amperes 2PDT and 7 Amperes 4PDT, Resilient Seal |
|
MIL-DTL-8790 Revision F:2007
|
HOSE ASSEMBLIES, RUBBER, HYDRAULIC, HIGH PRESSURE 3,000 PSI, OPERATING TEMPERATURE RANGE -65 DEGREES F TO +275 DEGREES F, FIELD ATTACHABLE |
|
MIL-DTL-87104 Revision C:2014
|
COAXIAL ASSEMBLIES, GENERAL SPECIFICATION FOR |
|
MIL-DTL-83796 Revision B:2008
|
HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, GENERAL SPECIFICATION FOR |
|
MIL-DTL-5523 Revision E:2011
|
VALVE; RELIEF, HYDRAULIC PRESSURE |
|
MIL-DTL-32330 Revision A:2015
|
Hose Assembly, Conductive Polytetrafluoroethylene Tube, Smooth Bore, Flared and Flareless, Tube to Hose, with Swivel Nut |
|
MIL-DTL-25579 Revision H:2014
|
Hose Assembly, Polytetrafluoroethylene, High Temperature, Medium Pressure, General Specification for |
|
MIL-DTL-8788 Revision G:2015
|
HOSE, RUBBER, HYDRAULIC, HIGH PRESSURE 3,000 PSI, OPERATING TEMPERATURE RANGE -65 DEGREES F TO +160 DEGREES F |
|
MIL-DTL-27267 Revision D:2012
|
Hose, Cres Wire Reinforced, Polytetrafluoroethylene, Four Hundred Fifty Degree Fahrenheit, Medium Pressure |
|
SAE AS 85560 : 2013
|
BEARINGS, FIBER REINFORCED PLASTIC, SLEEVE, PLAIN, AND FLANGED, SELF-LUBRICATING; GENERAL SPECIFICATION FOR |
|
MIL-PRF-18148 Revision D:2009
|
CONNECTORS, ELECTRICAL, AIRCRAFT STORAGE BATTERY - GENERAL SPECIFICATION FOR |
|
MIL-DTL-25708 Revision F:2008
|
ANTENNAS, BLADE, L-BAND, GENERAL SPECIFICATION FOR |
|
SAE ARP 5369 : 2016
|
GUIDELINES FOR WIRE IDENTIFICATION MARKING USING THE HOT STAMP PROCESS |
|
SAE AS 81934 : 2016
|
BEARINGS, SLEEVE, PLAIN AND FLANGED, SELF-LUBRICATING |
|
A-A-59935 Base Document:2013
|
Conical Seal, Crush, 37 Degree Flared Tube Fitting, General Requirements for |
|
MIL-PRF-5503 Revision G:2013
|
ACTUATORS: AERONAUTICAL LINEAR UTILITY, HYDRAULIC, GENERAL SPECIFICATION FOR |
|
MIL-PRF-6083 Revision G:2013
|
HYDRAULIC FLUID, PETROLEUM BASE, FOR PRESERVATION AND OPERATION |
|
MIL-DTL-25427 Revision B:2009
|
COUPLING ASSEMBLY, HYDRAULIC, SELF SEALING, QUICK DISCONNECT, GENERAL SPECIFICATION FOR |
|
MIL-DTL-32435 Base Document:2013
|
HOSE, POLYTETRAFLUOROETHYLENE, CONVOLUTED, 450 DEGREES F, MEDIUM PRESSURE |
|
BS EN 4689:2012
|
AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENTS COLD CURING POLYURETHANE FINISH - HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION |
|
SAE AS 81582 : 2017
|
CONNECTORS, ELECTRICAL, BAYONET COUPLING, ENVIRONMENT RESISTING, UMBILICAL, GENERAL SPECIFICATION FOR |
|
MIL-DTL-25955 Revision A:2004
|
CONNECTORS, ELECTRICAL, ENVIRONMENT RESISTING, MINIATURE, WITH SNAP-IN CONTACTS, OR HERMETICALLY SEALED WITH NON-REMOVABLE CONTACTS, GENERAL SPECIFICATION FOR |
|
MIL-DTL-83296 Revision B:2009
|
Fittings, Corrosion Resistant Steel, High Temperature, High Pressure (3000 PSI), Hydraulic and Pneumatic, General Specification for |
|
MIL-DTL-25516 Revision F:2004
|
CONNECTORS, ELECTRICAL, MINIATURE, COAXIAL, ENVIRONMENT RESISTANT TYPE, GENERAL SPECIFICATION FOR |
|
NASA KSC SPEC F 0006 : 2009
|
HEAT AND BLAST PROTECTION COATING MATERIALS AND APPLICATION METHODS, SPECIFICATION FOR |
|
MIL-DTL-83298 Revision C:2009
|
Hose, Conductive Polytetrafluoroethylene Tube, High Temperature, High Pressure (3000 PSI), Hydraulicand Pneumatic |
|
MIL-DTL-8815-32 Base Document:2010
|
FILTER ELEMENTS, NON-CLEANABLE, FLUID PRESSURE, HYDRAULIC LINE, 3000 PSI, 5 MICRON ABSOLUTE, -65 DEGREES F TO 275 DEGREES F, H-60 AIRCRAFT |
|
MIL-DTL-81716 Revision A:2009
|
PACKING, PREFORMED, STRAIGHT THREADED TUBE FITTING BOSS, TYPE 2 HYDRAULIC (-65 DEGREES F TO +275 DEGREES F) |
|
14/30298728 DC : 0
|
BS EN 3155-025 - AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 025: CONTACTS, ELECTRICAL, TRIAXIAL, SIZE 8, FEMALE, TYPE D, CRIMP, CLASS S - PRODUCT STANDARD |
|
SAE AIR 5358 : 2016
|
LANDING GEAR SHOCK STRUT HYDRAULIC FLUID |
|
MIL-DTL-3702 Revision F:2012
|
CABLE, POWER, ELECTRICAL: IGNITION, HIGH-TENSION |
|
SAE AS 83248/1 : 2016
|
O-RING MOLDED FROM AMS7276 MATERIAL |
|
MIL-DTL-83528 Revision H:2018
|
GASKETING MATERIAL, CONDUCTIVE, SHIELDING GASKET, ELECTRONIC, ELASTOMER, EMI/RFI GENERAL SPECIFICATION FOR |
|
MIL-DTL-32464 Revision A:2017
|
FITTINGS, ADAPTER, HYDRAULIC AND PNEUMATIC, 37 DEGREES SPHERICAL TO ANPT CONNECTORS, 1500 TO 3000 PSI, GENERAL SPECIFICATION FOR |
|
MIL-DTL-9395-39 Revision D:2010
|
SWITCHES, PRESSURE, (GAUGE) TYPE 2, LOW LEVEL TO 5 AMPERES |
|
I.S. EN 4688:2012
|
AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION |
|
MIL-DTL-32371 Base Document:2012
|
Fittings, Adapter, Hydraulic and Pneumatic, Spherical to ORFS Connectors, 1500 to 3000 PSI, General Specification for |
|
MIL-PRF-62382 Revision C:2011
|
VALVE, HYDRAULIC, PRESSURE RELIEF (METRIC) |
|
MIL-DTL-64154 Revision B:2008
|
LAMINATE: FIBERGLASS-FABRIC-REINFORCED, PHENOLIC |
|
SAE AS 4623 : 2016
|
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA-ARAMID REINFORCED, 3,000 PSI, 275 DEGREES F, HEAVY DUTY, AIRCRAFT HYDRAULIC SYSTEMS |
|
SAE AIR 1362 : 2016
|
AEROSPACE HYDRAULIC FLUIDS PHYSICAL PROPERTIES |
|
SAE AS 7928 : 2011
|
TERMINALS, LUG: SPLICES, CONDUCTOR: CRIMP STYLE, COPPER, GENERAL SPECIFICATION FOR |
|
SAE AS 5466 : 2012
|
AEROSPACE - GENERAL REQUIREMENTS FOR HYDRAULIC FUSE - QUANTITY MEASURING |
|
SAE AS 620 : 2012
|
HOSE ASSEMBLIES, CONVOLUTED POLYTETRAFLUOROETHYLENE METALLIC REINFORCED, HIGH TEMPERATURE, MEDIUM PRESSURE, AIRCRAFT |
|
SAE ARP 81490 : 2016
|
TRANSMISSION LINES, TRANSVERSE ELECTROMAGNETIC MODE |
|
PREN 3155-068 : 200P1
|
AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 068: CONTACTS, ELECTRICAL, COAXIAL, SIZE 08, FEMALE, TYPE D, SOLDER, CLASS R - PRODUCT STANDARD |
|
SAE AS 5958 : 2017
|
FITTINGS, AXIALLY SWAGED TUBE WITH FLARELESS SEPARABLE, FLUID SYSTEM FOR OPERATING PRESSURES UP TO AND INCLUDING 5080 PSI (35 000 KPA), SPECIFICATION FOR |
|
I.S. EN 4687:2012
|
AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE NON CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION |
|
SAE AS 83248/2 : 2016
|
O-RING MOLDED FROM AMS7259 MATERIAL |
|
SAE AS 683 : 2012
|
INSTALLATION PROCEDURES AND TORQUES FOR FLUID CONNECTIONS |
|
SAE AS 28772 : 2015
|
'D' RING SEAL FOR SHOCK STRUTS MOLDED FROM AMS-P-25732 MATERIAL |
|
EN 4689:2012
|
Aerospace series - Paints and varnishes - Two components cold curing polyurethane finish - High flexibility and chemical agent resistance for military application |
|
EN 4687:2012
|
Aerospace series - Paints and varnishes - Chromate free non corrosion inhibiting two components cold curing primer for military application |
|
EN 4688:2012
|
Aerospace series - Paints and varnishes - Corrosion inhibiting two components cold curing primer for military application |
|
SAE AS 82819 : 2013
|
BEARINGS, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, 300 CPM OSCILLATION (13 FPM), -65 TO +160 DEGREES F (-54 TO +71 DEGREES C), LINERS LESS THAN 0.015 INCHES |
|
SAE AIR 1228 : 2009
|
STANDARD IMPULSE MACHINE EQUIPMENT AND OPERATION |
|
SAE AS 28778 : 2016
|
O-RING, STRAIGHT THREAD TUBE FITTING BOSS MOLDED FROM AMS-P-5510 RUBBER |
|
MIL-DTL-13444 Revision H:2006
|
Hose and Hose Assemblies, Rubber: Fuel and Oil |
|
MIL-DTL-83723-27 Revision C:2015
|
CONNECTORS, ELECTRICAL, BACKSHELL, WITH HEAT-SHRINKABLE STRAIN-RELIEF BOOT (STRAIGHT AND RIGHT ANGLE), THREADED COUPLING |
|
SAE AIR 5005 : 2015
|
AEROSPACE - COMMERCIAL AIRCRAFT HYDRAULIC SYSTEMS |
|
MIL-DTL-8794 Revision F:2007
|
HOSE, SYNTHETIC RUBBER - HYDRAULIC FLUID, FUEL, AND OIL RESISTANT |
|
MIL-DTL-26482 Revision H:2007
|
Connectors, Electrical, Circular, Miniature, Quick Disconnect, Environment Resisting, Receptacles and Plugs, General Specification for |
|
MIL-PRF-32058 Revision B:2017
|
CHOCK, WHEEL-TRACK - AVIATION, ADJUSTABLE ROPE TYPE |
|
MIL-DTL-19068 Revision B:2006
|
VALVES, SHUTTLE, HYDRAULIC, AIRCRAFT, TYPE 2 SYSTEMS |
|
MIL-DTL-5593 Revision E:2006
|
HOSE, AIRCRAFT, LOW PRESSURE AIR AND VACUUM, FLEXIBLE |
|
SAE AS 50151 : 2015
|
CONNECTORS, ELECTRICAL, CIRCULAR THREADED, AN TYPE, GENERAL SPECIFICATION FOR |
|
MIL-DTL-32234 Base Document:2007
|
CONNECTORS, ELECTRICAL, ULTRA HIGH DENSITY, MODULAR, BLADE AND FORK, EIGHT ROW, GENERAL SPECIFICATION FOR |
|
17/30371344 DC : 0
|
BS EN 4689 - AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENTS COLD CURING POLYURETHANE FINISH - HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION |
|
BS EN 3155-069 : 2009
|
AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 069: CONTACTS, ELECTRICAL, COAXIAL, SIZE 16, FEMALE, TYPE D, SOLDER, CLASS P - PRODUCT STANDARD |
|
MIL-DTL-83798 Revision D:2008
|
FITTING, RUBBER HOSE, LIGHTWEIGHT, MEDIUM PRESSURE, GENERAL SPECIFICATION FOR |
|
MIL-PRF-83860 Revision D:2013
|
FILTER ELEMENTS, DISPOSABLE, FLUID PRESSURE, HYDRAULIC LINE, 5 MICRON ABSOLUTE |
|
MIL-DTL-32460 Revision A:2017
|
ADAPTER, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE TUBE FITTING TO ORFS CONNECTORS, 1500 TO 3000 PSI AND -65 DEGREES F TO 250 DEGREES F, GENERAL SPECIFICATION FOR |
|
MIL-DTL-8777 Revision F:2011
|
WIRE, ELECTRICAL, SILICONE-INSULATED, COPPER, 600-VOLT, 200 DEGREES C |
|
MIL-DTL-8795 Revision G:2014
|
HOSE ASSEMBLIES, ELASTOMERIC, HYDRAULIC, FUEL, AND OIL RESISTANT, GENERAL SPECIFICATION FOR |
|
MIL-PRF-87257 Revision C:2017
|
HYDRAULIC FLUID, FIRE RESISTANT, LOW TEMPERATURE, SYNTHETIC HYDROCARBON BASE, AIRCRAFT AND MISSILE |
|
NF EN 3155-068 : 2009
|
AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 068: CONTACTS, ELECTRICAL, COAXIAL, SIZE 08, FEMALE, TYPE D, SOLDER, CLASS R - PRODUCT STANDARD |
|
MIL-STD-3004 Revision D:2014
|
QUALITY ASSURANCE/SURVEILLANCE FOR FUELS, LUBRICANTS AND RELATED PRODUCTS |
|
SAE ARP 1595 : 2013(R2019)
|
DESIGN AND VERIFICATION OF AIRCRAFT NOSE WHEEL STEERING SYSTEMS |
|
MIL-PRF-81757-17 Base Document:2009
|
BATTERY, STORAGE, AIRCRAFT, NICKEL-CADMIUM, HIGH-RATE, TYPE 2, 24-VOLT, 35-AMPERE-HOUR, CHARGE CONTROLLED |
|
SAE AS 4459 : 2013
|
FITTINGS, TUBE, FLUID SYSTEM 3000 PSIG (21000 KPA) RATED PRESSURE, EXTERNALLY SWAGED, SPECIFICATION FOR |
|
SAE AS 85720 : 2018
|
FITTINGS, TUBE, FLUID SYSTEMS, SEPARABLE, HIGH PRESSURE BEAM SEAL, 5000/8000 PSI, GENERAL SPECIFICATION FOR |
|
SAE AIR 5565 : 2017
|
HISTORICAL DESIGN INFORMATION OF AIRCRAFT LANDING GEAR AND CONTROL ACTUATION SYSTEMS |
|
SAE ARP 1827C : 2014
|
MEASURING AIRCRAFT GAS TURBINE ENGINE FINE FUEL FILTER ELEMENT PERFORMANCE |
|
SAE AS 81824 : 2016
|
SPLICE, ELECTRIC, CRIMP, COPPER, ENVIRONMENT RESISTANT |
|
SAE AS 22759 : 2014
|
WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, COPPER OR COPPER ALLOY |
|
I.S. EN 4689:2012
|
AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENTS COLD CURING POLYURETHANE FINISH - HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION |
|
SAE AS 7510 : 2017
|
COUPLING ASSEMBLY, THREADLESS, FLEXIBLE, SELF-LOCKING, FIXED CAVITY, HIGH CONDUCTIVITY, SELF-BONDING, PART SPECIFICATION |
|
SAE AS 85485 : 2017
|
CABLE, ELECTRIC, FILTER LINE, RADIO FREQUENCY ABSORPTIVE |
|
SAE AS 85421 : 2015
|
FITTINGS, TUBE, FLUID SYSTEMS, SEPARABLE, BEAM SEAL, 3000/4000 PSI, GENERAL SPECIFICATION FOR |
|
SAE AS 18280 : 2017
|
FITTINGS, 24 DEGREES CONE FLARELESS, FLUID CONNECTION, 3000 PSI |
|
SAE AS 6235 : 2015
|
FACE SEAL GLAND DESIGN, STATIC, O-RING AND OTHER SEALS FOR AEROSPACE HYDRAULIC AND PNEUMATIC APPLICATIONS |
|
MIL-PRF-6164 Revision G:2012
|
VALVE; AIRCRAFT, PNEUMATIC, HIGH-PRESSURE CHARGING |
|
MIL-PRF-8805-104 Revision D:2012
|
SWITCHES, SENSITIVE, PLUNGER, 7 AMPERES, 4PDT, RESILIENT SEAL, GROUNDED PLUNGER |
|
MIL-DTL-25707 Revision G:2015
|
ANTENNA, FLUSH MOUNT, L-BAND, GENERAL SPECIFICATION FOR |
|
16/30350072 DC : 0
|
BS EN 3155-024 - AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 024: CONTACTS, ELECTRICAL, TRIAXIAL, SIZE 8, MALE, TYPE D, CRIMP, CLASS S - PRODUCT STANDARD |
|
MIL-DTL-32434 Base Document:2013
|
Hose Assembly, Polytetrafluoroethylene, Convoluted, High Temperature, Medium Pressure, General Specification for |
|
BS ISO 11171:2016
|
Hydraulic fluid power. Calibration of automatic particle counters for liquids |
|
SAE AIR 5829 : 2008
|
AIR IN AIRCRAFT HYDRAULIC SYSTEMS |
|
SAE ARP 1231 : 2017
|
GLAND DESIGN, ELASTOMERIC O-RING SEALS, GENERAL CONSIDERATIONS |
|
SAE AS 5960 : 2013
|
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC BRAID REINFORCED, 5080 PSI (35000 KPA), 400 DEGREES F (204 DEGREES C), AIRCRAFT HYDRAULIC SYSTEMS |
|
SAE AIR 81 : 2016
|
IMPORTANCE OF PHYSICAL AND CHEMICAL PROPERTIES OF AIRCRAFT HYDRAULIC FLUIDS |
|
MIL-DTL-26500 Revision G:2011
|
CONNECTORS, GENERAL PURPOSE, ELECTRICAL, MINIATURE, CIRCULAR, ENVIRONMENT RESISTING OR HERMETICALLY SEALED, GENERAL SPECIFICATION FOR |
|
MIL-DTL-5516 Revision D:2008
|
Packing, Preformed, Petroleum Hydraulic Fluid Resistant, 160 Degrees F (71 Degrees C) |
|
MIL-DTL-5070 Revision F:2006
|
ADAPTER, HOSE TO TUBE, PIPE AND FLANGE, REUSABLE - HYDRAULIC, FUEL, AND OIL LINES, GENERAL SPECIFICATION FOR |
|
MIL-PRF-83861 Revision D:2013
|
FILTER ELEMENTS, DISPOSABLE, FLUID PRESSURE, HYDRAULIC LINE, 5 AND 15 MICRON ABSOLUTE |
|
BS EN 3155-068:2009
|
AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 068: CONTACTS, ELECTRICAL, COAXIAL, SIZE 08, FEMALE, TYPE D, SOLDER, CLASS R - PRODUCT STANDARD |
|
MIL-STD-2161 Revision C:2014
|
Paint Schemes and Exterior Markings for U.S. Navy and Marine Corps Aircraft |
|
MIL-DTL-8789 Revision G:2015
|
FITTING END, ATTACHABLE, HYDRAULIC, HIGH PRESSURE (3,000 PSI), GENERAL SPECIFICATION FOR |
|
MIL-PRF-46170 Revision E:2013
|
HYDRAULIC FLUID, RUST INHIBITED, FIRE RESISTANT, SYNTHETIC HYDROCARBON BASE, NATO CODE NO. H-544 |
|
I.S. EN 3155-068:2009
|
AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 068: CONTACTS, ELECTRICAL, COAXIAL, SIZE 08, FEMALE, TYPE D, SOLDER, CLASS R - PRODUCT STANDARD |
|
ISO 8829-1:2009
|
Aerospace Test methods for polytetrafluoroethylene (PTFE) inner-tube hose assemblies Part 1: Metallic (stainless steel) braid |
|
SAE ARP 1280 : 2014
|
AEROSPACE - APPLICATION GUIDE FOR HYDRAULIC POWER TRANSFER UNITS |
|
PREN 4688 : 200P1
|
AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION |
|
SAE AS 81714 : 2014
|
TERMINAL JUNCTION SYSTEM (TJS), ENVIRONMENT RESISTANT, GENERAL SPECIFICATION FOR |
|
PREN 4687 : 200P1
|
AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE NON CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION |
|
SAE AS 1339 : 2017
|
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, 3000 PSI, 400 DEGREES F, LIGHTWEIGHT, HYDRAULIC AND PNEUMATIC |
|
SAE AS 81819 : 2010
|
BEARINGS, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, HIGH SPEED OSCILLATION -65 TO +160 DEGREES F GENERAL SPECIFICATION FOR |
|
I.S. EN 3155-069:2009
|
AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 069: CONTACTS, ELECTRICAL, COAXIAL, SIZE 16, FEMALE, TYPE D, SOLDER, CLASS P - PRODUCT STANDARD |
|
SAE AS 5729 : 2016
|
O-RING MOLDED FROM AMS7379 (FLUOROCARBON) MATERIAL |
|
SAE ARP 4752 : 2013
|
AEROSPACE - DESIGN AND INSTALLATION OF COMMERCIAL TRANSPORT AIRCRAFT HYDRAULIC SYSTEMS |
|
SAE AS 83819 : 2013
|
BEARINGS, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, 1400 CPM (15 FPM), OSCILLATION, -65 TO +160 DEGREES F (-54 TO +71 DEGREES C) |
|
SAE AS 81659 : 2017
|
CONNECTORS, ELECTRICAL, RECTANGULAR CRIMP CONTACTS, GENERAL SPECIFICATION FOR |
|
SAE ARP 901 : 2017
|
BUBBLE-POINT TEST METHOD |
|
BS EN 3155-041:2007
|
Aerospace series. Electrical contacts used in elements of connection Contacts, electrical, coaxial, size 12, female, type D, solder, class R. Product standard |
|
BS EN 3155-025:2006
|
Aerospace series. Electrical contacts used in elements of connection Contacts, electrical, triaxial, size 8, female, type D, crimp, class S. Product standard |
|
BS EN 3155-024:2006
|
Aerospace series. Electrical contacts used in elements of connection Contacts, electrical, triaxial, size 8, male, type D, crimp, class S. Product standard |
|
EN 3155-040:2007
|
Aerospace series - Electrical contacts used in elements of connection - Part 040: Contacts, electrical, coaxial, size 12, male, type D, solder, class R - Product standard |
|
EN 3155-068:2009
|
Aerospace series - Electrical contacts used in elements of connection - Part 068: Contacts, electrical, coaxial, size 08, female, type D, solder, class R - Product standard |
|
EN 3155-025:2006
|
Aerospace series - Electrical contacts used in elements of connection - Part 025: Contacts, electrical, triaxial, size 8, female, type D, crimp, class S - Product standard |
|
MIL-DTL-5508 Revision C:2007
|
FUSES, AIRCRAFT AUTOMATIC QUANTITY-MEASURING, HYDRAULIC |
|
EN 3155-067:2009
|
Aerospace series - Electrical contacts used in elements of connection - Part 067: Contacts, electrical, coaxial, size 08, male, type D, solder, class R - Product standard |
|
EN 3155-041:2007
|
Aerospace series - Electrical contacts used in elements of connection - Part 041: Contacts, electrical, coaxial, size 12, female, type D, solder, class R - Product standard |
|
EN 3155-069:2009
|
Aerospace series - Electrical contacts used in elements of connection - Part 069: Contacts, electrical, coaxial, size 16, female, type D, solder, class P - Product standard |
|
EN 3155-039:2007
|
Aerospace series - Electrical contacts used in elements of connection - Part 039: Contacts, electrical, coaxial, size 16, female, type D, solder, class R - Product standard |
|
EN 3155-024:2006
|
Aerospace series - Electrical contacts used in elements of connection - Part 024: Contacts, electrical, triaxial, size 8, male, type D, crimp, class S - Product standard |
|
MIL-F-26301 Revision H:2014
|
FLASHER, SOLID STATE, AIRCRAFT NAVIGATIONAL LIGHT, GENERAL SPECIFICATION FOR |
|
MIL-DTL-24630 Revision A:2014
|
VALVES, CHECK, IN-LINE, FOR HYDRAULIC FLUID AND LUBRICATING OIL FLUID, GENERAL SPECIFICATION FOR |
|
BS ISO 8829-1 : 2009
|
AEROSPACE - TEST METHODS FOR POLYTETRAFLUOROETHYLENE (PTFE) INNER-TUBE HOSE ASSEMBLIES - PART 1: METALLIC (STAINLESS STEEL) BRAID |
|
SAE ARP 1311 : 2015
|
LANDING GEAR STRUCTURES AND MECHANISMS |
|
SAE AIR 4094 : 2016
|
AIRCRAFT FLIGHT CONTROL SYSTEMS DESCRIPTIONS |
|
14/30298727 DC : 0
|
BS EN 3155-024 - AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 024: CONTACTS, ELECTRICAL, TRIAXIAL, SIZE 8, MALE, TYPE D, CRIMP, CLASS S - PRODUCT STANDARD |
|
SAE AMS P 5510 : 2013
|
O-RING, PREFORMED, STRAIGHT THREAD TUBE FITTING BOSS, TYPE 1 HYDRAULIC (-65 TO 160 DEGREES F) |
|
16/30350073 DC : 0
|
BS EN 3155-025 - AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 025 - CONTACTS, ELECTRICAL, TRIAXIAL, SIZE 8, FEMALE, TYPE D, CRIMP, CLASS S - PRODUCT STANDARD |
|
SAE AS 506 : 2004
|
HIGH TEMPERATURE INSULATED TERMINALS & SPLICES |
|
MIL-DTL-5521 Revision C:2007
|
WASHER, AIRCRAFT HYDRAULIC PACKING BACK-UP |
|
BS EN 4688:2012
|
AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION |
|
MIL-DTL-83420 Revision P:2017
|
WIRE ROPE, FLEXIBLE, FOR AIRCRAFT CONTROL, GENERAL SPECIFICATION FOR |
|
MIL-DTL-9395-30 Revision H:2012
|
Switches, Pressure, (Gage), Type II 5 Amperes |
|
PREN 3155-024 : 200P1
|
AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 024: CONTACTS, ELECTRICAL, TRIAXIAL, SIZE 8, MALE, TYPE D, CRIMP, CLASS S - PRODUCT STANDARD |
|
MIL-DTL-8815-33 Base Document:2011
|
FILTER ELEMENTS, NON-CLEANABLE, FLUID PRESSURE, HYDRAULIC LINE, 3500 PSI, 5 MICRON ABSOLUTE, -65 DEGREES F TO 275 DEGREES F, AVIATION GROUND POWER UNIT (AGPU) |
|
SAE AIR 887 : 2013
|
LIQUID FILTER RATINGS, PARAMETERS AND TESTS |
|
SAE AS 4775 : 2017
|
AIRCRAFT MAINTENANCE JACKS - GENERAL REQUIREMENTS |
|
SAE AS 5467 : 2016
|
GENERAL REQUIREMENTS FOR HYDRAULIC FUSE - FLOW RATE |
|
SAE ARP 4925 : 2014
|
AEROSPACE DESIGN AND INSTALLATION OF COMMERCIAL TRANSPORT HELICOPTER HYDRAULIC SYSTEMS |
|
SAE AS 81511 : 2016
|
CONNECTORS, ELECTRICAL, CIRCULAR, HIGH DENSITY, QUICK DISCONNECT, ENVIRONMENT RESISTING AND ACCESSORIES, GENERAL SPECIFICATION FOR |
|
SAE ARP 5632 : 2016
|
ROTORCRAFT: APPLICATION OF EXISTING AIRCRAFT DESIGNED TIRES, WHEELS AND BRAKES |
|
SAE AS 83519 : 2015
|
SHIELD TERMINATION, SOLDER STYLE, INSULATED, HEAT-SHRINKABLE, ENVIRONMENT RESISTANT GENERAL SPECIFICATION FOR |
|
SAE AIR 5490 : 2016
|
CARBON BRAKE CONTAMINATION AND OXIDATION |
|
PREN 3155-069 : 200P1
|
AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 069: CONTACTS, ELECTRICAL, COAXIAL, SIZE 16, FEMALE, TYPE D, SOLDER, CLASS P - PRODUCT STANDARD |
|
SAE AS 4941 : 2015
|
AEROSPACE - GENERAL REQUIREMENTS FOR COMMERCIAL AIRCRAFT HYDRAULIC COMPONENTS |
|
SAE AIR 4543 : 2017
|
AEROSPACE HYDRAULICS AND ACTUATION LESSONS LEARNED |
|
SAE AS 81703 : 2012
|
CONNECTORS, ELECTRIC, CIRCULAR, MINIATURE, RACK AND PANEL OR PUSH-PULL COUPLING, ENVIRONMENT RESISTING |
|
SAE AS 6116 : 2016
|
ALUMINUM FITTINGS, AXIALLY SWAGED TUBE WITH FLARELESS SEPERABLE, FLUID SYSTEM, UP TO 1500 PSI (10340 KPA) MAXIMUM, SPECIFICATION FOR |
|
SAE AS 8942 : 2014
|
BEARINGS, PLAIN AND PTFE LINED, SELF - ALIGNING |
|
SAE ARP4912C:2017
|
DESIGN RECOMMENDATIONS FOR SPARE SEALS IN LANDING GEAR SHOCK STRUTS |
|
SAE AS 6224 : 2015
|
WRAP-AROUND INSULATION REPAIR AND PROTECTION SLEEVE, PERMANENT, ELECTRIC, ENVIRONMENT RESISTANT |
|
SAE AS 81820 : 2014
|
BEARINGS, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, LOW SPEED OSCILLATION |
|
SAE AIR 786 : 2014
|
ELASTOMER COMPATIBILITY CONSIDERATIONS RELATIVE TO ELASTOMERIC SEALANT SELECTION |
|
SAE AMS 3167 : 2005
|
SOLVENTS, WIPE FOR CLEANING PRIOR TO APPLICATION OF PRIMER AND TOP COAT MATERIALS, OR SEALING COMPOUNDS |
|
I.S. EN 3155-067:2009
|
AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 067: CONTACTS, ELECTRICAL, COAXIAL, SIZE 08, MALE, TYPE D, SOLDER, CLASS R - PRODUCT STANDARD |