FACILITY SYSTEMS, GROUND SUPPORT SYSTEMS, AND GROUND SUPPORT EQUIPMENT GENERAL DESIGN REQUIREMENTS

Published date

01-01-2012

Publisher

National Aeronautics and Space Administration

1. SCOPE
2. APPLICABLE DOCUMENTS
3. ACRONYMS, ABBREVIATIONS, AND DEFINITIONS
4. GENERAL REQUIREMENTS
5. DESIGN AND CONSTRUCTION REQUIREMENTS
6. MATERIALS AND PROCESSES REQUIREMENTS
APPENDIX A - GROUND SYSTEM IDENTIFICATION COLORS
APPENDIX B - DELIVERABLES
APPENDIX C - REFERENCE DOCUMENTS

Sets up requirements and guidance for design and fabrication of ground systems (GS) that includes: ground support equipment (GSE), ground support systems (GSS), and facility ground support systems (F-GSS) to provide uniform methods and processes for design and development of robust, safe, reliable, maintainable, supportable, and cost-effective GS in support of space flight and institutional programs and projects.

DocumentType	Standard
PublisherName	National Aeronautics and Space Administration
Status	Current

NASA KSC NE 10074 : 2013	ELECTRICAL GROUND SUPPORT EQUIPMENT (EGSE) QUALIFICATION TEST PLAN
NASA KSC E 165 : 2009	ELECTRICAL GROUND SUPPORT EQUIPMENT FABRICATION, SPECIFICATION FOR
NASA KSC STD E 0012 : 2013	FACILITY GROUNDING AND LIGHTNING PROTECTION, STANDARD FOR
NASA STD 5005 : 2013	STANDARD FOR THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT
NASA KSC E 166 : 2009	INSTALLATION AND ASSEMBLY, ELECTRICAL GROUND SUPPORT EQUIPMENT (GSE) SPECIFICATION FOR
NASA KSC STD E 0022 : 2013	BONDING, GROUNDING, SHIELDING, ELECTROMAGNETIC INTERFERENCE, LIGHTNING AND TRANSIENT PROTECTION, DESIGN REQUIREMENTS FOR GROUND SYSTEMS
NASA KSC STD Z 0004 : 2002	STRUCTURAL DESIGN, STANDARD FOR
NASA KSC SPEC E 0002 : 2010	MODULAR ELECTRICAL ENCLOSURES, RACKS, CONSOLES, AND ACCESSORIES, SPECIFICATION FOR
NASA STD 8719.24 : 2011	NASA EXPENDABLE LAUNCH VEHICLE PAYLOAD SAFETY REQUIREMENTS
NASA KSC STD Z 0005 : 1988	DESIGN OF PNEUMATIC GROUND-SUPPORT EQUIPMENT, STANDARD FOR
NASA KSC GP 986 : 1993	DESIGN CRITERIA FOR REUSABLE SPACE VEHICLE UMBILICAL SYSTEMS

SAE AMS DTL 23053/5A : 2012	INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, POLYOLEFIN, FLEXIBLE, CROSSLINKED
MIL HDBK 17-5 : 0	COMPOSITE MATERIALS HANDBOOK - VOLUME 5: CERAMIC MATRIX COMPOSITES
IPC 6011 : 0	GENERIC PERFORMANCE SPECIFICATION FOR PRINTED BOARDS
NASA KSC E 165 : 2009	ELECTRICAL GROUND SUPPORT EQUIPMENT FABRICATION, SPECIFICATION FOR
SAE AMS 2404 : 2013	PLATING, ELECTROLESS NICKEL
NASA STD 8719.9 : 2015	LIFTING STANDARD
IPC 2252 : 0	DESIGN GUIDE FOR RF/MICROWAVE CIRCUIT BOARDS
NASA KSC GP 986 : 1993	DESIGN CRITERIA FOR REUSABLE SPACE VEHICLE UMBILICAL SYSTEMS
SAE AS 8090 : 2016	MOBILITY, TOWED AEROSPACE GROUND EQUIPMENT, GENERAL REQUIREMENTS FOR
NASA KSC STD E 0011 : 2009	ELECTRICAL POWER RECEPTACLES AND PLUGS, STANDARD FOR
NASA KSC STD G 0003 : 1988	QUALIFICATION OF LAUNCH SUPPORT AND FACILITY COMPONENTS, STANDARD FOR
NASA STD 8739.5 : 2015	WORKMANSHIP STANDARD FOR FIBER OPTIC TERMINATIONS, CABLE ASSEMBLIES, AND INSTALLATION
SAE AMS QQ P 416 : 2016	PLATING, CADMIUM (ELECTRODEPOSITED)
NASA KSC GP 425 : 1997	FLUID FITTING ENGINEERING STANDARDS
IEEE 1187-2013 REDLINE	IEEE Recommended Practice for Installation Design and Installation of Valve-Regulated Lead-Acid Batteries for Stationary Applications
MIL-STD-101 Revision C:2014	COLOR CODE FOR PIPELINES AND FOR COMPRESSED GAS CYLINDERS
NASA KSC E 166 : 2009	INSTALLATION AND ASSEMBLY, ELECTRICAL GROUND SUPPORT EQUIPMENT (GSE) SPECIFICATION FOR
MIL-PRF-39012 Revision F:2014	CONNECTORS, COAXIAL, RADIO FREQUENCY, GENERAL SPECIFICATION FOR
AISC 325 : 2017	STEEL CONSTRUCTION MANUAL
NASA STD 8739.1 : 2016	WORKMANSHIP STANDARD FOR POLYMERIC APPLICATION ON ELECTRONIC ASSEMBLIES
SAE AMS 2488 : 2000	ANODIC TREATMENT - TITANIUM AND TITANIUM ALLOYS SOLUTION PH 13 OR HIGHER
CFR 29(PTS1900-1910) : 0	LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR
MIL-DTL-24308 Revision G:2009	Connectors, Electric, Rectangular, Nonenvironmental, Miniature, Polarized Shell, Rack and Panel, General Specification for
ASTM E 2217 : 2012 : REDLINE	Standard Practice for Design and Construction of Aerospace Cleanrooms and Contamination Controlled Areas
NASA STD 8739.3 : 1998	SOLDERED ELECTRICAL CONNECTIONS
SAE AMS 2175 : 2010	CASTINGS, CLASSIFICATION AND INSPECTION OF
NASA STD 6001 : 2011	FLAMMABILITY, OFFGASSING, AND COMPATIBILITY REQUIREMENTS AND TEST PROCEDURES
NASA KSC GP 864 VOL 2A : 2009	ELECTRICAL GROUND SUPPORT EQUIPMENT CABLE HANDBOOK
IPC J STD 001 : F	REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES
NASA KSC SPEC Z 0008 : 1978	FABRICATION AND INSTALLATION OF FLARED TUBE ASSEMBLIES AND INSTALLATION OF FITTINGS AND FITTING ASSEMBLIES, SPECIFICATION FOR
MIL-STD-810 Revision G:2008	ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS
IPC 6018 : B	QUALIFICATION AND PERFORMANCE SPECIFICATION FOR HIGH FREQUENCY (MICROWAVE) PRINTED BOARDS
SAE AMS 2770 : 2015	HEAT TREATMENT OF WROUGHT ALUMINUM ALLOY PARTS
SAE AS 4787 : 2013	EDDY CURRENT INSPECTION OF CIRCULAR HOLES IN NONFERROUS METALLIC AIRCRAFT ENGINE HARDWARE
NASA STD 8739.2 : 1999	WORKMANSHIP STANDARD FOR SURFACE MOUNT TECHNOLOGY
AWS C3.7M/C3.7 : 2011	SPECIFICATION FOR ALUMINUM BRAZING
SAE AMS 2647 : 2014	FLUORESCENT PENETRANT INSPECTION, AIRCRAFT AND ENGINE COMPONENT MAINTENANCE
IEEE 1106-2015 REDLINE	IEEE Recommended Practice for Installation, Maintenance, Testing, and Replacement of Vented Nickel-Cadmium Batteries for Stationary Applications
MIL-HDBK-700 Revision A:1975	PLASTICS
AWS C3.6M/C3.6 : 2016	SPECIFICATION FOR FURNACE BRAZING
NAS410:2003	NAS CERTIFICATION & QUALIFICATION OF NONDESTRUCTIVE TEST PERSONNEL
NASA STD 4003 : 2013	ELECTRICAL BONDING FOR NASA LAUNCH VEHICLES, SPACECRAFT, PAYLOADS, AND FLIGHT EQUIPMENT
ASTM G 88 : 2013 : REDLINE	Standard Guide for Designing Systems for Oxygen Service
NASA KSC NE 9187 : 2008	SENSORS, TRANSDUCERS AND SIGNAL CONDUCTING SYSTEMS SELECTION PROCESS
NASA KSC SPEC Z 0009 : 1991	LUBRICATION, THREAD, CORROSION-RESISTANT STEEL AND ALUMINUM ALLOY TUBE FITTINGS, SPECIFICATION FOR
MIL-STD-1686 Revision C:1995	ELECTROSTATIC DISCHARGE CONTROL PROGRAM FOR PROTECTION OF ELECTRICAL AND ELECTRONIC PARTS, ASSEMBLIES AND EQUIPMENT (EXCLUDING ELECTRICALLY INITIATED EXPLOSIVE DEVICES)
NASA KSC STD Z 0008 : 1996	DESIGN OF GROUND LIFE SUPPORT SYSTEMS AND EQUIPMENT, STANDARD FOR
MIL-DTL-22992 Revision H:2015	Connectors, Plugsand Receptacles, Electrical, Waterproof, Quick Disconnect, Heavy Duty Type, General Specification for
AWS C3.3 : 2008	RECOMMENDED PRACTICES FOR THE DESIGN, MANUFACTURE, AND EXAMINATION OF CRITICAL BRAZED COMPONENTS
SAE AMS 2759 : 2014	HEAT TREATMENT OF STEEL PARTS, GENERAL REQUIREMENTS
AWS C3.5M/C3.5 : 2016	SPECIFICATION FOR INDUCTION BRAZING
NFPA 496 : 2017	PURGED AND PRESSURIZED ENCLOSURES FOR ELECTRICAL EQUIPMENT
ASTM A 380 : 2006	Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems
ARP1176A : 2013(R2018)	OXYGEN SYSTEM AND COMPONENT CLEANING
MIL-HDBK-454 Revision B:2007	GENERAL GUIDELINES FOR ELECTRONIC EQUIPMENT
MIL-STD-889 Revision C:2016	DISSIMILAR METALS
AWS C3.4M/C3.4 : 2016	SPECIFICATION FOR TORCH BRAZING
NASA MSFC STD 486 : 1992	STANDARD, THREADED FASTENERS, TORQUE LIMITS FOR
AWS C3.2M/C3.2 : 2008	STANDARD METHOD FOR EVALUATING THE STRENGTH OF BRAZED JOINTS
NASA KSC STD E 0004 : 2008	PNEUMATIC AND HYDRAULIC MECHANICAL COMPONENTS, ELECTRICAL DESIGN, STANDARD FOR
ASHRAE HDBK FUNDAMENTALS : 2013	ASHRAE HANDBOOK - FUNDAMENTALS
IEC 62305-1:2010	Protection against lightning - Part 1: General principles
MIL-STD-464 Revision C:2010	ELECTROMAGNETIC ENVIRONMENTAL EFFECTS REQUIREMENTS FOR SYSTEMS
MIL-HDBK-17-3 Revision F:2002	COMPOSITE MATERIALS HANDBOOK - VOLUME 3: POLYMER MATRIX COMPOSITES MATERIALS USAGE, DESIGN, AND ANALYSIS
SAE AMS 2460 : 2013	PLATING, CHROMIUM
ASTM D 5363 : 2016 : REDLINE	Standard Specification for Anaerobic Single-Component Adhesives (AN)
SAE AS 22759 : 2014	WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, COPPER OR COPPER ALLOY
NASA KSC STD P 0006 : 1995	QUICK RELEASE PINS AND PIN TETHERS, STANDARD FOR
NASA STD 5008 : 2011	PROTECTIVE COATING OF CARBON STEEL, STAINLESS STEEL, AND ALUMINUM ON LAUNCH STRUCTURES, FACILITIES, AND GROUND SUPPORT EQUIPMENT
SAE AMS 2423 : 2015	PLATING, NICKEL, HARD DEPOSIT
NASA KSC DF 107 : 2017	TECHNICAL DOCUMENTATION STYLE GUIDE
ESD S20.20 : 2014	PROTECTION OF ELECTRICAL AND ELECTRONIC PARTS, ASSEMBLIES AND EQUIPMENT (EXCLUDING ELECTRICALLY INITIATED EXPLOSIVE DEVICES)
NASA KSC STD E 0022 : 2013	BONDING, GROUNDING, SHIELDING, ELECTROMAGNETIC INTERFERENCE, LIGHTNING AND TRANSIENT PROTECTION, DESIGN REQUIREMENTS FOR GROUND SYSTEMS
NASA KSC SPEC P 0027 : 2010	TUBING, SUPERAUSTENITIC STEEL, CORROSION RESISTANT, UNS N08367 AND UNS S31254, SEAMED, BRIGHT ANNEALED, PASSIVATED, SPECIFICATION FOR
NASA KSC STD Z 0009 : 1994	DESIGN OF CRYOGENIC GROUND SUPPORT EQUIPMENT, STANDARD FOR
NASA KSC STD E 0001 : 2008	DESIGN OF ELECTRICAL CONTROL AND MONITORING SYSTEMS, EQUIPMENT (GSE), AND PANELS, STANDARD FOR
SAE AMS 2772 : 2016	HEAT TREATMENT OF ALUMINUM ALLOY RAW MATERIALS
NASA KSC C 123 : 2009	SURFACE CLEANLINESS OF GROUND SUPPORT EQUIPMENT FLUID SYSTEMS, SPECIFICATION FOR
NASA STD 8739.4 : 2016	WORKMANSHIP STANDARD FOR CRIMPING, INTERCONNECTING CABLES, HARNESSES, AND WIRING
IPC 2221B:2012	GENERIC STANDARD ON PRINTED BOARD DESIGN
MIL-HDBK-17-4 Revision A:2002	Composite Materials Handbook - Volume 4 Metal Matrix Composites
NASA MSFC STD 3029 : 2000	GUIDELINES FOR THE SELECTION OF METALLIC MATERIALS FOR STRESS CORROSION CRACKING RESISTANCE IN SODIUM CHLORIDE ENVIRONMENTS
SAE AS 50151 : 2015	CONNECTORS, ELECTRICAL, CIRCULAR THREADED, AN TYPE, GENERAL SPECIFICATION FOR
NASA KSC STD Z 0005 : 1988	DESIGN OF PNEUMATIC GROUND-SUPPORT EQUIPMENT, STANDARD FOR
MIL-DTL-38999 Revision M:2015	Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect (Bayonet, Threaded or Breech Coupling), Environment Resistant with Crimp Removable Contacts or Hermetically Sealed with Fixed, Solderable Contacts, General Specification for
MIL-HDBK-263 Revision B:1994	ELECTROSTATIC DISCHARGE CONTROL HANDBOOK FOR PROTECTION OF ELECTRICAL & ELECTRONIC PARTS, ASSEMBLIES & EQUIPMENT
MIL-DTL-16878 Revision H:2012	WIRE, ELECTRICAL, INSULATED, GENERAL SPECIFICATION FOR
NASA KSC STD E 0002 : 2009	HAZARDPROOFING OF ELECTRICALLY ENERGIZED EQUIPMENT, STANDARD FOR
NASA KSC STD E 0012 : 2013	FACILITY GROUNDING AND LIGHTNING PROTECTION, STANDARD FOR
MIL-STD-461 Revision G:2015	REQUIREMENTS FOR THE CONTROL OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS OF SUBSYSTEMS AND EQUIPMENT
SAE ARP 1658 : 2014	HOSE ASSEMBLIES, INSTALLED, VISUAL INSPECTION GUIDE FOR
NFPA 70E : 2018	ELECTRICAL SAFETY IN THE WORKPLACE
NASA JSC 29353 : 2014	FLAMMABILITY CONFIGURATION ANALYSIS FOR SPACECRAFT APPLICATIONS
SAE AS 50861 : 2011	WIRE, ELECTRIC, POLYVINYL CHLORIDE INSULATED, COPPER OR COPPER ALLOY
IEEE 484-2002	IEEE Recommended Practice for Installation Design and Installation of Vented Lead-Acid Batteries for Stationary Applications
NASA-STD-8719.17C:2017	NASA REQUIREMENTS FOR GROUND-BASED PRESSURE VESSELS AND PRESSURIZED SYSTEMS (PVS)
SAE AMS H 81200 : 2014	HEAT TREATMENT OF TITANIUM AND TITANIUM ALLOYS
NFPA 70 : 2017	NATIONAL ELECTRICAL CODE
SAE AMS 2759/9 : 2009	HYDROGEN EMBRITTLEMENT RELIEF (BAKING) OF STEEL PARTS
ASTM E 2375 : 2016 : REDLINE	Standard Practice for Ultrasonic Testing of Wrought Products
ASTM E 1444 : 2005	Standard Practice for Magnetic Particle Testing
NASA HDBK 1001 : 0	TERRESTRIAL ENVIRONMENT (CLIMATIC) CRITERIA HANDBOOK FOR USE IN AEROSPACE VEHICLE DEVELOPMENT
NASA KSC GP 435 VOL 1 : 2014	ENGINEERING DRAWING PRACTICES - VOLUME 1: AEROSPACE AND GROUND SUPPORT EQUIPMENT
NASA KSC SPEC E 0002 : 2010	MODULAR ELECTRICAL ENCLOSURES, RACKS, CONSOLES, AND ACCESSORIES, SPECIFICATION FOR
NASA KSC DD 818-TR : 1984	SUMMARY OF MEASUREMENTS OF KSC LAUNCH-INDUCED ENVIRONMENT EFFECTS (STS-1 THROUGH STS-2)
IEST STD CC1246 : 2013	PRODUCT CLEANLINESS LEVELS - APPLICATIONS, REQUIREMENTS, AND DETERMINATION
NFPA 59A : 2016	PRODUCTION, STORAGE, AND HANDLING OF LIQUEFIED NATURAL GAS (LNG)
SAE ARP 1247 : 2010	AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS
NASA KSC STD E 0015 : 1992	MARKING OF GROUND SUPPORT EQUIPMENT, STANDARD FOR
NASA MSFC SPEC 445 : 1990	ADHESIVE BONDING, PROCESS AND INSPECTION, REQUIREMENTS FOR
ASTM D 7194 : 2012 : REDLINE	Standard Specification for Aerospace Parts Machined from Polychlorotrifluoroethylene (PCTFE)
MIL-HDBK-149 Revision B:1984	Rubber
SAE AMS 2774 : 2016	HEAT TREATMENT, WROUGHT NICKEL ALLOY AND COBALT ALLOY PARTS
NASA STD 6002 : 2008	APPLYING DATA MATRIX IDENTIFICATION SYMBOLS ON AEROSPACE PARTS
IPC 2222 : A	SECTIONAL DESIGN STANDARD FOR RIGID ORGANIC PRINTED BOARDS
NASA STD 5005 : 2013	STANDARD FOR THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT
NASA STD 8719.12 : 2010	SAFETY STANDARD FOR EXPLOSIVES, PROPELLANTS, AND PYROTECHNICS
SAE AMS 2403 : 2015	PLATING, NICKEL, GENERAL PURPOSE
ASTM G 63 : 2015 : REDLINE	Standard Guide for Evaluating Nonmetallic Materials for Oxygen Service
CGA C 7 : 2014	GUIDE TO CLASSIFICATION AND LABELING OF COMPRESSED GASES
NASA MSFC STD 156 : 1962	RIVETING, FABRICATING AND INSPECTION, STANDARD FOR
NASA KSC STD Z 0006 : 1995	DESIGN OF HYPERGOLIC PROPELLANTS GROUND SUPPORT EQUIPMENT, STANDARD FOR
NASA SPEC 5004 : 0	WELDING OF AEROSPACE GROUND SUPPORT EQUIPMENT AND RELATED NONCONVENTIONAL FACILITIES
AIAA R 100 : A 2001	RECOMMENDED PRACTICE FOR PARTS MANAGEMENT
MIL-STD-202 Revision H:2015	ELECTRONIC AND ELECTRICAL COMPONENT PARTS
CFR 29(PT1926) : 0	LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR - SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION
NASA KSC SPEC P 0012 : 1979	REFRACTORY CONCRETE, SPECIFICATION FOR
NASA KSC STD SF 0004 : 2015	SAFETY STANDARD FOR GROUND PIPING SYSTEMS COLOR CODING AND IDENTIFICATION
MIL-HDBK-6870 Revision B:2012	NONDESTRUCTIVE INSPECTION PROGRAM REQUIREMENTS FOR AIRCRAFT AND MISSILE MATERIALS AND PARTS
SAE AMS H 6875 : 2010	HEAT TREATMENT OF STEEL RAW MATERIALS
SAE AS 5942 : 2014	MARKING OF ELECTRICAL INSULATING MATERIALS
NASA KSC MMA 1985-79 : REV 6	STANDARD TEST METHOD FOR EVALUATING TRIBOELECTRIC CHARGE GENERATION AND DECAY
IPC 6013 : C	QUALIFICATION AND PERFORMANCE SPECIFICATION FOR FLEXIBLE/RIGID-FLEXIBLE PRINTED BOARDS
IPC 2223 : C	SECTIONAL DESIGN STANDARD FOR FLEXIBLE/RIGID-FLEXIBLE PRINTED BOARDS
NASA KSC STD 132 : 2008	POTTING AND MOLDING ELECTRICAL CABLE ASSEMBLY TERMINATIONS, STANDARD FOR
MIL-HDBK-17-1 Revision F:2002	COMPOSITE MATERIALS HANDBOOK - VOLUME 1: POLYMER MATRIX COMPOSITES GUIDELINES FOR CHARACTERIZATION OF STRUCTURAL MATERIALS
FED-STD-595 Revision C:2008	COLORS USED IN GOVERNMENT PROCUREMENT
AIAA G 095 : 2004	GUIDE TO SAFETY OF HYDROGEN AND HYDROGEN SYSTEMS
NASA MSFC SPEC 164 : 2010	CLEANLINESS OF COMPONENTS FOR USE IN OXYGEN, FUEL, AND PNEUMATIC SYSTEMS, SPECIFICATION FOR
AWS D17.1/D17.1M : 2012	SPECIFICATION FOR FUSION WELDING FOR AEROSPACE APPLICATIONS
NASA KSC STD 141 : 1989	LOAD TEST IDENTIFICATION AND DATA MARKING STANDARD FOR
NASA STD 5009 : 2008	NONDESTRUCTIVE EVALUATION REQUIREMENTS FOR FRACTURE-CRITICAL METALLIC COMPONENTS - MEASUREMENT SYSTEM IDENTIFICATION: METRIC (INCH-POUND)
NASA KSC STD Z 0010 : 1983	DESIGN OF ENVIRONMENTAL CONTROL SYSTEMS, GROUND COOLANT SYSTEMS, COOLANT SERVICING SYSTEMS, AND GROUND SUPPORT EQUIPMENT, STANDARD FOR
CFR 49(PTS100-185) : 0	TRANSPORTATION
NASA KSC SPEC Z 0007 : 1994	TUBING, STEEL, CORROSION RESISTANT TYPES 304 AND 316, SEAMLESS, ANNEALED, SPECIFICATION FOR
SAE ARP 4402 : 2013	EDDY CURRENT INSPECTION OF OPEN FASTENER HOLES IN ALUMINUM AIRCRAFT STRUCTURE
ASCE 7 98 : 2000	MINIMUM DESIGN LOADS FOR BUILDINGS AND OTHER STRUCTURES
IPC 6012 : C	QUALIFICATION AND PERFORMANCE SPECIFICATION FOR RIGID PRINTED BOARDS
MIL-HDBK-17-2 Revision F:2002	COMPOSITE MATERIALS HANDBOOK - VOLUME 2: POLYMER MATRIX COMPOSITES MATERIALS PROPERTIES
NASA KSC STD 164 : 1992	ENVIRONMENTAL TEST METHODS FOR GROUND SUPPORT EQUIPMENT, STANDARD FOR